Determination of the process damping coefficient using plain cutting tests

Research output: Chapter in book/report/conference proceedingConference contributionResearchpeer review

Authors

  • Berend Denkena
  • Alexander Krödel
  • Lars Ellersiek
View graph of relations

Details

Original languageEnglish
Title of host publication9th CIRP Conference on High Performance Cutting
Subtitle of host publicationHPC 2020
EditorsErdem Ozturk, David Curtis, Hassan Ghadbeigi
PublisherElsevier Science B.V.
Pages302-305
Number of pages4
ISBN (electronic)9781713835431
Publication statusPublished - 2021
Event9th CIRP Conference on High Performance Cutting, HPC 2020 - Virtual, Online
Duration: 24 May 202126 May 2021

Publication series

NameProcedia CIRP
Volume101
ISSN (Print)2212-8271

Abstract

Process damping is an important effect to avoid chatter vibrations. It is commonly modeled as a force, which can be calculated by multiplying the indented workpiece volume with a process damping coefficient. However, the coefficient strongly varies depending on the chosen determination method. In this paper, the coefficient is determined by planing tests with a chamfered tool with negative chamfer angle and varying chamfer length (62 - 275 µm). Thereby, the workpiece is indented with a defined volume. Additionally, microstructure images are created to identify workpiece deformations. The results show decreasing coefficients with increasing indentation volume due to increasing plastic deformation.

Keywords

    Chatter, Cutting, Ploughing

ASJC Scopus subject areas

Cite this

Determination of the process damping coefficient using plain cutting tests. / Denkena, Berend; Krödel, Alexander; Ellersiek, Lars.
9th CIRP Conference on High Performance Cutting: HPC 2020. ed. / Erdem Ozturk; David Curtis; Hassan Ghadbeigi. Elsevier Science B.V., 2021. p. 302-305 (Procedia CIRP; Vol. 101).

Research output: Chapter in book/report/conference proceedingConference contributionResearchpeer review

Denkena, B, Krödel, A & Ellersiek, L 2021, Determination of the process damping coefficient using plain cutting tests. in E Ozturk, D Curtis & H Ghadbeigi (eds), 9th CIRP Conference on High Performance Cutting: HPC 2020. Procedia CIRP, vol. 101, Elsevier Science B.V., pp. 302-305, 9th CIRP Conference on High Performance Cutting, HPC 2020, Virtual, Online, 24 May 2021. https://doi.org/10.1016/j.procir.2020.09.197
Denkena, B., Krödel, A., & Ellersiek, L. (2021). Determination of the process damping coefficient using plain cutting tests. In E. Ozturk, D. Curtis, & H. Ghadbeigi (Eds.), 9th CIRP Conference on High Performance Cutting: HPC 2020 (pp. 302-305). (Procedia CIRP; Vol. 101). Elsevier Science B.V.. https://doi.org/10.1016/j.procir.2020.09.197
Denkena B, Krödel A, Ellersiek L. Determination of the process damping coefficient using plain cutting tests. In Ozturk E, Curtis D, Ghadbeigi H, editors, 9th CIRP Conference on High Performance Cutting: HPC 2020. Elsevier Science B.V. 2021. p. 302-305. (Procedia CIRP). Epub 2021 Sept 6. doi: 10.1016/j.procir.2020.09.197
Denkena, Berend ; Krödel, Alexander ; Ellersiek, Lars. / Determination of the process damping coefficient using plain cutting tests. 9th CIRP Conference on High Performance Cutting: HPC 2020. editor / Erdem Ozturk ; David Curtis ; Hassan Ghadbeigi. Elsevier Science B.V., 2021. pp. 302-305 (Procedia CIRP).
Download
@inproceedings{7e731fa5a1a64c37967e2dbd714c1275,
title = "Determination of the process damping coefficient using plain cutting tests",
abstract = "Process damping is an important effect to avoid chatter vibrations. It is commonly modeled as a force, which can be calculated by multiplying the indented workpiece volume with a process damping coefficient. However, the coefficient strongly varies depending on the chosen determination method. In this paper, the coefficient is determined by planing tests with a chamfered tool with negative chamfer angle and varying chamfer length (62 - 275 µm). Thereby, the workpiece is indented with a defined volume. Additionally, microstructure images are created to identify workpiece deformations. The results show decreasing coefficients with increasing indentation volume due to increasing plastic deformation.",
keywords = "Chatter, Cutting, Ploughing",
author = "Berend Denkena and Alexander Kr{\"o}del and Lars Ellersiek",
note = "Funding Information: The authors thank the German Research Foundation (DFG) for the financial support within the project “DE 447/139-1”.; 9th CIRP Conference on High Performance Cutting, HPC 2020 ; Conference date: 24-05-2021 Through 26-05-2021",
year = "2021",
doi = "10.1016/j.procir.2020.09.197",
language = "English",
series = "Procedia CIRP",
publisher = "Elsevier Science B.V.",
pages = "302--305",
editor = "Erdem Ozturk and David Curtis and Hassan Ghadbeigi",
booktitle = "9th CIRP Conference on High Performance Cutting",
address = "Netherlands",

}

Download

TY - GEN

T1 - Determination of the process damping coefficient using plain cutting tests

AU - Denkena, Berend

AU - Krödel, Alexander

AU - Ellersiek, Lars

N1 - Funding Information: The authors thank the German Research Foundation (DFG) for the financial support within the project “DE 447/139-1”.

PY - 2021

Y1 - 2021

N2 - Process damping is an important effect to avoid chatter vibrations. It is commonly modeled as a force, which can be calculated by multiplying the indented workpiece volume with a process damping coefficient. However, the coefficient strongly varies depending on the chosen determination method. In this paper, the coefficient is determined by planing tests with a chamfered tool with negative chamfer angle and varying chamfer length (62 - 275 µm). Thereby, the workpiece is indented with a defined volume. Additionally, microstructure images are created to identify workpiece deformations. The results show decreasing coefficients with increasing indentation volume due to increasing plastic deformation.

AB - Process damping is an important effect to avoid chatter vibrations. It is commonly modeled as a force, which can be calculated by multiplying the indented workpiece volume with a process damping coefficient. However, the coefficient strongly varies depending on the chosen determination method. In this paper, the coefficient is determined by planing tests with a chamfered tool with negative chamfer angle and varying chamfer length (62 - 275 µm). Thereby, the workpiece is indented with a defined volume. Additionally, microstructure images are created to identify workpiece deformations. The results show decreasing coefficients with increasing indentation volume due to increasing plastic deformation.

KW - Chatter

KW - Cutting

KW - Ploughing

UR - http://www.scopus.com/inward/record.url?scp=85125934463&partnerID=8YFLogxK

U2 - 10.1016/j.procir.2020.09.197

DO - 10.1016/j.procir.2020.09.197

M3 - Conference contribution

AN - SCOPUS:85125934463

T3 - Procedia CIRP

SP - 302

EP - 305

BT - 9th CIRP Conference on High Performance Cutting

A2 - Ozturk, Erdem

A2 - Curtis, David

A2 - Ghadbeigi, Hassan

PB - Elsevier Science B.V.

T2 - 9th CIRP Conference on High Performance Cutting, HPC 2020

Y2 - 24 May 2021 through 26 May 2021

ER -