Details
Original language | English |
---|---|
Title of host publication | Material Forming ESAFORM 2012 |
Pages | 205-210 |
Number of pages | 6 |
Publication status | Published - 3 Feb 2012 |
Externally published | Yes |
Event | 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012 - Erlangen, Germany Duration: 14 Mar 2012 → 16 Mar 2012 |
Publication series
Name | Key Engineering Materials |
---|---|
Volume | 504-506 |
ISSN (Print) | 1013-9826 |
Abstract
To produce preforms for complex long flat parts with an unsteady mass distribution along the longitudinal axis rolling processes, like cross wedge rolling, can be used. Tools for cross wedge rolling processes can be designed as roller or flat, both with wedges. In the collaborative research project SFB 489 "Process chain for the production of precision forged high performance parts" the subproject "Innovative machine and tool technology for precision forging" deals with the development of a flashless forging process for a two cylinder crankshaft with pin and flange. This process is developed by IPH - Institut fur Integrierte Produktion Hannover. The first preform of the developed forging sequence is produced by a cross wedge rolling process on the basis of flat with wedges. To consider the mass distribution of the two cylinder crankshaft in the preform for a rolling process four mass concentrations for the crank arms and mass concentrations for pin and flange are needed.
Keywords
- Crankshaft, Cross wedge rolling, Forging sequence, Preform, Rolling process
ASJC Scopus subject areas
- Materials Science(all)
- General Materials Science
- Engineering(all)
- Mechanics of Materials
- Engineering(all)
- Mechanical Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
Material Forming ESAFORM 2012. 2012. p. 205-210 (Key Engineering Materials; Vol. 504-506).
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - Cross wedge rolling of preforms for crankshafts
AU - Meyer, Matthias
AU - Stonis, Malte
AU - Behrens, Bernd Arno
PY - 2012/2/3
Y1 - 2012/2/3
N2 - To produce preforms for complex long flat parts with an unsteady mass distribution along the longitudinal axis rolling processes, like cross wedge rolling, can be used. Tools for cross wedge rolling processes can be designed as roller or flat, both with wedges. In the collaborative research project SFB 489 "Process chain for the production of precision forged high performance parts" the subproject "Innovative machine and tool technology for precision forging" deals with the development of a flashless forging process for a two cylinder crankshaft with pin and flange. This process is developed by IPH - Institut fur Integrierte Produktion Hannover. The first preform of the developed forging sequence is produced by a cross wedge rolling process on the basis of flat with wedges. To consider the mass distribution of the two cylinder crankshaft in the preform for a rolling process four mass concentrations for the crank arms and mass concentrations for pin and flange are needed.
AB - To produce preforms for complex long flat parts with an unsteady mass distribution along the longitudinal axis rolling processes, like cross wedge rolling, can be used. Tools for cross wedge rolling processes can be designed as roller or flat, both with wedges. In the collaborative research project SFB 489 "Process chain for the production of precision forged high performance parts" the subproject "Innovative machine and tool technology for precision forging" deals with the development of a flashless forging process for a two cylinder crankshaft with pin and flange. This process is developed by IPH - Institut fur Integrierte Produktion Hannover. The first preform of the developed forging sequence is produced by a cross wedge rolling process on the basis of flat with wedges. To consider the mass distribution of the two cylinder crankshaft in the preform for a rolling process four mass concentrations for the crank arms and mass concentrations for pin and flange are needed.
KW - Crankshaft
KW - Cross wedge rolling
KW - Forging sequence
KW - Preform
KW - Rolling process
UR - http://www.scopus.com/inward/record.url?scp=84857186985&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/KEM.504-506.205
DO - 10.4028/www.scientific.net/KEM.504-506.205
M3 - Conference contribution
AN - SCOPUS:84857186985
SN - 9783037853665
T3 - Key Engineering Materials
SP - 205
EP - 210
BT - Material Forming ESAFORM 2012
T2 - 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012
Y2 - 14 March 2012 through 16 March 2012
ER -