Details
| Original language | English |
|---|---|
| Pages (from-to) | 10535-10558 |
| Number of pages | 24 |
| Journal | Silicon |
| Volume | 14 |
| Issue number | 16 |
| Early online date | 11 Mar 2022 |
| Publication status | Published - Nov 2022 |
Abstract
This work aims to investigate the behaviour of the semi-crystalline alumina added to the aluminosilicates rich in amorphous and crystalline silica during the geopolymerization. Waste fired brick and metakaolin used in this work are rich in amorphous silica and quartz, respectively. Bauxite calcined at 600 °C was used as a semi-crystalline alumina source. The calcined product was added to each aluminosilicate with mass ratios calcined bauxite/metakaolin or calcined bauxite/waste fired brick equals 0, 0.1, 0.2, 0.3 and 0.4. Geopolymer pastes were obtained by adding sodium waterglass to each composition. The hardened pastes were cured at room temperature for 28 days before characterization. The compressive strengths of the geopolymer materials when the mass ratios of calcined bauxite/metakaolin are ranging from 0 to 0.3 increase from 36.33 to 55.09 MPa and drop from 55.09 to 43.19 MPa when that mass ratios increase from 0.3 to 0.4. Whereas those from waste fired brick decrease from 47.81 to 19.91 MPa with increasing the mass ratios. The spectra of the energy dispersive X-ray analysis of geopolymer materials from metakaolin and the one from waste fired brick without addition indicate the formation of Si-rich geopolymer networks. Whereas the one from waste fired brick after the addition of semi-crystalline alumina are mainly composed of Al-rich geopolymer structures. It can be concluded that the semi-crystalline alumina added to the metakaolin spread in the network of the final products while this alumina does not react with amorphous silica contained in the structure of waste fired brick during the geopolymerization.
Keywords
- Amorphous silica, Geopolymer materials, Metakaolin, Quartz, Semi-crystalline alumina, Waste fired brick
ASJC Scopus subject areas
- Materials Science(all)
- Electronic, Optical and Magnetic Materials
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Silicon, Vol. 14, No. 16, 11.2022, p. 10535-10558.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Compressive Strengths and Microstructural Properties of Geopolymeric Materials Arising from the Addition of Semi-crystalline Alumina to Silica-rich Aluminosilicate Sources
AU - Riyap, Hamed I.
AU - Ngongang, B. K.
AU - Tchakouté, Hervé Kouamo
AU - Nanseu-Njiki, C. P.
AU - Rüscher, C. H.
N1 - Funding Information: Pr. Hervé Tchakouté Kouamo gratefully acknowledges Alexander von Humboldt-Stiftung for financial support for this work under the grant N° KAM/1155741 GFHERMES-P.
PY - 2022/11
Y1 - 2022/11
N2 - This work aims to investigate the behaviour of the semi-crystalline alumina added to the aluminosilicates rich in amorphous and crystalline silica during the geopolymerization. Waste fired brick and metakaolin used in this work are rich in amorphous silica and quartz, respectively. Bauxite calcined at 600 °C was used as a semi-crystalline alumina source. The calcined product was added to each aluminosilicate with mass ratios calcined bauxite/metakaolin or calcined bauxite/waste fired brick equals 0, 0.1, 0.2, 0.3 and 0.4. Geopolymer pastes were obtained by adding sodium waterglass to each composition. The hardened pastes were cured at room temperature for 28 days before characterization. The compressive strengths of the geopolymer materials when the mass ratios of calcined bauxite/metakaolin are ranging from 0 to 0.3 increase from 36.33 to 55.09 MPa and drop from 55.09 to 43.19 MPa when that mass ratios increase from 0.3 to 0.4. Whereas those from waste fired brick decrease from 47.81 to 19.91 MPa with increasing the mass ratios. The spectra of the energy dispersive X-ray analysis of geopolymer materials from metakaolin and the one from waste fired brick without addition indicate the formation of Si-rich geopolymer networks. Whereas the one from waste fired brick after the addition of semi-crystalline alumina are mainly composed of Al-rich geopolymer structures. It can be concluded that the semi-crystalline alumina added to the metakaolin spread in the network of the final products while this alumina does not react with amorphous silica contained in the structure of waste fired brick during the geopolymerization.
AB - This work aims to investigate the behaviour of the semi-crystalline alumina added to the aluminosilicates rich in amorphous and crystalline silica during the geopolymerization. Waste fired brick and metakaolin used in this work are rich in amorphous silica and quartz, respectively. Bauxite calcined at 600 °C was used as a semi-crystalline alumina source. The calcined product was added to each aluminosilicate with mass ratios calcined bauxite/metakaolin or calcined bauxite/waste fired brick equals 0, 0.1, 0.2, 0.3 and 0.4. Geopolymer pastes were obtained by adding sodium waterglass to each composition. The hardened pastes were cured at room temperature for 28 days before characterization. The compressive strengths of the geopolymer materials when the mass ratios of calcined bauxite/metakaolin are ranging from 0 to 0.3 increase from 36.33 to 55.09 MPa and drop from 55.09 to 43.19 MPa when that mass ratios increase from 0.3 to 0.4. Whereas those from waste fired brick decrease from 47.81 to 19.91 MPa with increasing the mass ratios. The spectra of the energy dispersive X-ray analysis of geopolymer materials from metakaolin and the one from waste fired brick without addition indicate the formation of Si-rich geopolymer networks. Whereas the one from waste fired brick after the addition of semi-crystalline alumina are mainly composed of Al-rich geopolymer structures. It can be concluded that the semi-crystalline alumina added to the metakaolin spread in the network of the final products while this alumina does not react with amorphous silica contained in the structure of waste fired brick during the geopolymerization.
KW - Amorphous silica
KW - Geopolymer materials
KW - Metakaolin
KW - Quartz
KW - Semi-crystalline alumina
KW - Waste fired brick
UR - http://www.scopus.com/inward/record.url?scp=85126023955&partnerID=8YFLogxK
U2 - 10.1007/s12633-022-01786-5
DO - 10.1007/s12633-022-01786-5
M3 - Article
AN - SCOPUS:85126023955
VL - 14
SP - 10535
EP - 10558
JO - Silicon
JF - Silicon
SN - 1876-990X
IS - 16
ER -