Details
Original language | English |
---|---|
Pages (from-to) | 1047-1060 |
Number of pages | 14 |
Journal | Waste and biomass valorization |
Volume | 9 |
Publication status | Published - 9 Mar 2017 |
Abstract
The 7 days compressive strength of alkali activation of class C fly ash from Mongolia (Banganuur fly ash) and class F fly ashes from South Africa (Ash Resources, Ulala) were measured, depending on different waterglass (WG) to sodium hydroxide ratios in the activator. FTIR, XRD and SEM analyses were carried out. It is observed that Baganuur fly ash can be activated sufficiently using NaOH-solution only obtaining highest strength (33 MPa), whereas Ulala and Ash Resources almost fails (<10 MPa). The South Africa fly ash gains, however, around 28 MPa using 50:50% WG to NaOH ratios, where the class C-fly ash becomes a bit weaker (24 MPa). The different behavior is explained by formation of different geopolymer-types of network. In the case of class C fly ash alkali activation without the contribution waterglass is sufficient for the formation of amorphous C–S–H type phases due to the structure directing effect of the high amount of Ca-ions. This effect is lost with increasing the waterglass content. The waterglass effect—on the other hand—enforces the strength development for class F-fly ashes with high Al content instead of high Ca. Here network is formed mainly via preliminary chain formation due to condensation of the waterglass followed by cross-linking the chains via sialate linkages.
Keywords
- Class C-fly ash, alkaline solution, Class F-fly ash, Geopolymers, Microstructure
ASJC Scopus subject areas
- Environmental Science(all)
- Environmental Engineering
- Energy(all)
- Renewable Energy, Sustainability and the Environment
- Environmental Science(all)
- Waste Management and Disposal
Sustainable Development Goals
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
In: Waste and biomass valorization, Vol. 9, 09.03.2017, p. 1047-1060.
Research output: Contribution to journal › Article › Research › peer review
}
TY - JOUR
T1 - Comparative Studies of Alkali Activated South African Class F and Mongolian Class C Fly Ashes
AU - Temuujin, J.
AU - Mapiravana, J.
AU - Bayarzul, U.
AU - Oyun-Erdene, G.
AU - Zolzaya, Ts
AU - Darkhijav, B.
AU - Dlamini, M.
AU - Rüscher, C. H.
N1 - Funding information: The present joint research was supported by the Council of Scientific and Industrial Research (CSIR) of the Republic of South Africa and the Mongolian Academy of Sciences. JT and CHR supported by Alexander von Humboldt Foundation, too, which is gratefully acknowledged.
PY - 2017/3/9
Y1 - 2017/3/9
N2 - The 7 days compressive strength of alkali activation of class C fly ash from Mongolia (Banganuur fly ash) and class F fly ashes from South Africa (Ash Resources, Ulala) were measured, depending on different waterglass (WG) to sodium hydroxide ratios in the activator. FTIR, XRD and SEM analyses were carried out. It is observed that Baganuur fly ash can be activated sufficiently using NaOH-solution only obtaining highest strength (33 MPa), whereas Ulala and Ash Resources almost fails (<10 MPa). The South Africa fly ash gains, however, around 28 MPa using 50:50% WG to NaOH ratios, where the class C-fly ash becomes a bit weaker (24 MPa). The different behavior is explained by formation of different geopolymer-types of network. In the case of class C fly ash alkali activation without the contribution waterglass is sufficient for the formation of amorphous C–S–H type phases due to the structure directing effect of the high amount of Ca-ions. This effect is lost with increasing the waterglass content. The waterglass effect—on the other hand—enforces the strength development for class F-fly ashes with high Al content instead of high Ca. Here network is formed mainly via preliminary chain formation due to condensation of the waterglass followed by cross-linking the chains via sialate linkages.
AB - The 7 days compressive strength of alkali activation of class C fly ash from Mongolia (Banganuur fly ash) and class F fly ashes from South Africa (Ash Resources, Ulala) were measured, depending on different waterglass (WG) to sodium hydroxide ratios in the activator. FTIR, XRD and SEM analyses were carried out. It is observed that Baganuur fly ash can be activated sufficiently using NaOH-solution only obtaining highest strength (33 MPa), whereas Ulala and Ash Resources almost fails (<10 MPa). The South Africa fly ash gains, however, around 28 MPa using 50:50% WG to NaOH ratios, where the class C-fly ash becomes a bit weaker (24 MPa). The different behavior is explained by formation of different geopolymer-types of network. In the case of class C fly ash alkali activation without the contribution waterglass is sufficient for the formation of amorphous C–S–H type phases due to the structure directing effect of the high amount of Ca-ions. This effect is lost with increasing the waterglass content. The waterglass effect—on the other hand—enforces the strength development for class F-fly ashes with high Al content instead of high Ca. Here network is formed mainly via preliminary chain formation due to condensation of the waterglass followed by cross-linking the chains via sialate linkages.
KW - Class C-fly ash, alkaline solution
KW - Class F-fly ash
KW - Geopolymers
KW - Microstructure
UR - http://www.scopus.com/inward/record.url?scp=85014622217&partnerID=8YFLogxK
U2 - 10.1007/s12649-017-9881-5
DO - 10.1007/s12649-017-9881-5
M3 - Article
AN - SCOPUS:85014622217
VL - 9
SP - 1047
EP - 1060
JO - Waste and biomass valorization
JF - Waste and biomass valorization
SN - 1877-2641
ER -