Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Authors

  • Ilja Gorelik
  • Mats Wiese
  • Lukas Bürger
  • Sebastian Tatzko
  • Hanno Reckmann
  • Andreas Hohl
  • Jörg Wallaschek

Research Organisations

External Research Organisations

  • Baker Hughes INTEQ
View graph of relations

Details

Original languageEnglish
Title of host publicationModel Validation and Uncertainty Quantification, Volume 3
Subtitle of host publicationProceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018
EditorsRobert Barthorpe
Place of PublicationCham
Pages109-117
Number of pages9
Volume3
Edition1.
ISBN (electronic)978-3-319-74793-4
Publication statusPublished - 31 Jul 2018
Event36th IMAC, A Conference and Exposition on Structural Dynamics 2018 - , United States
Duration: 12 Feb 2018 → 15 Feb 2018

Publication series

NameConference Proceedings of the Society for Experimental Mechanics Series (CPSEMS)
ISSN (Print)2191-5644
ISSN (electronic)2191-5652

Abstract

To compare the susceptibility of different drillstring assemblies to lateral vibrations while taking parameter uncertainties into consideration, a computationally efficient model based on the transfer matrix method (TMM) in combination with a modal reduction is proposed in this study. Changing boundary conditions along the drilling trajectory are taken into account by combining the linear dynamic analysis from the TMM model with a static solution obtained from a finite element model. The statistical evaluation of the results enables a comparison of the dynamic behavior of different drillstring configurations during an early design stage.

Keywords

    Lateral drillstring vibrations, Monte Carlo simulations, Parameter uncertainties, Robust design, Transfer matrix method

ASJC Scopus subject areas

Cite this

Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties. / Gorelik, Ilja; Wiese, Mats; Bürger, Lukas et al.
Model Validation and Uncertainty Quantification, Volume 3: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. ed. / Robert Barthorpe. Vol. 3 1. ed. Cham, 2018. p. 109-117 (Conference Proceedings of the Society for Experimental Mechanics Series (CPSEMS)).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Gorelik, I, Wiese, M, Bürger, L, Tatzko, S, Reckmann, H, Hohl, A & Wallaschek, J 2018, Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties. in R Barthorpe (ed.), Model Validation and Uncertainty Quantification, Volume 3: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. 1. edn, vol. 3, Conference Proceedings of the Society for Experimental Mechanics Series (CPSEMS), Cham, pp. 109-117, 36th IMAC, A Conference and Exposition on Structural Dynamics 2018, United States, 12 Feb 2018. https://doi.org/10.1007/978-3-319-74793-4_15
Gorelik, I., Wiese, M., Bürger, L., Tatzko, S., Reckmann, H., Hohl, A., & Wallaschek, J. (2018). Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties. In R. Barthorpe (Ed.), Model Validation and Uncertainty Quantification, Volume 3: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 (1. ed., Vol. 3, pp. 109-117). (Conference Proceedings of the Society for Experimental Mechanics Series (CPSEMS)).. https://doi.org/10.1007/978-3-319-74793-4_15
Gorelik I, Wiese M, Bürger L, Tatzko S, Reckmann H, Hohl A et al. Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties. In Barthorpe R, editor, Model Validation and Uncertainty Quantification, Volume 3: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. 1. ed. Vol. 3. Cham. 2018. p. 109-117. (Conference Proceedings of the Society for Experimental Mechanics Series (CPSEMS)). doi: 10.1007/978-3-319-74793-4_15
Gorelik, Ilja ; Wiese, Mats ; Bürger, Lukas et al. / Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties. Model Validation and Uncertainty Quantification, Volume 3: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018. editor / Robert Barthorpe. Vol. 3 1. ed. Cham, 2018. pp. 109-117 (Conference Proceedings of the Society for Experimental Mechanics Series (CPSEMS)).
Download
@inproceedings{fe5c72f188214303affb528447b06bc5,
title = "Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties",
abstract = "To compare the susceptibility of different drillstring assemblies to lateral vibrations while taking parameter uncertainties into consideration, a computationally efficient model based on the transfer matrix method (TMM) in combination with a modal reduction is proposed in this study. Changing boundary conditions along the drilling trajectory are taken into account by combining the linear dynamic analysis from the TMM model with a static solution obtained from a finite element model. The statistical evaluation of the results enables a comparison of the dynamic behavior of different drillstring configurations during an early design stage.",
keywords = "Lateral drillstring vibrations, Monte Carlo simulations, Parameter uncertainties, Robust design, Transfer matrix method",
author = "Ilja Gorelik and Mats Wiese and Lukas B{\"u}rger and Sebastian Tatzko and Hanno Reckmann and Andreas Hohl and J{\"o}rg Wallaschek",
note = "Funding information: The author would like to thank Baker Hughes and the German Federal Ministry for Economic Affairs and Energy (BMWi) for funding this research (Project Number FKZ 0324015). Acknowledgements The author would like to thank Baker Hughes and the German Federal Ministry for Economic Affairs and Energy (BMWi) for funding this research (Project Number FKZ 0324015).; 36th IMAC, A Conference and Exposition on Structural Dynamics 2018 ; Conference date: 12-02-2018 Through 15-02-2018",
year = "2018",
month = jul,
day = "31",
doi = "10.1007/978-3-319-74793-4_15",
language = "English",
isbn = "978-3-319-74792-7",
volume = "3",
series = "Conference Proceedings of the Society for Experimental Mechanics Series (CPSEMS)",
pages = "109--117",
editor = "Robert Barthorpe",
booktitle = "Model Validation and Uncertainty Quantification, Volume 3",
edition = "1.",

}

Download

TY - GEN

T1 - Application of the Transfer Matrix Method for the Analysis of Lateral Vibrations of Drillstrings with Parameter Uncertainties

AU - Gorelik, Ilja

AU - Wiese, Mats

AU - Bürger, Lukas

AU - Tatzko, Sebastian

AU - Reckmann, Hanno

AU - Hohl, Andreas

AU - Wallaschek, Jörg

N1 - Funding information: The author would like to thank Baker Hughes and the German Federal Ministry for Economic Affairs and Energy (BMWi) for funding this research (Project Number FKZ 0324015). Acknowledgements The author would like to thank Baker Hughes and the German Federal Ministry for Economic Affairs and Energy (BMWi) for funding this research (Project Number FKZ 0324015).

PY - 2018/7/31

Y1 - 2018/7/31

N2 - To compare the susceptibility of different drillstring assemblies to lateral vibrations while taking parameter uncertainties into consideration, a computationally efficient model based on the transfer matrix method (TMM) in combination with a modal reduction is proposed in this study. Changing boundary conditions along the drilling trajectory are taken into account by combining the linear dynamic analysis from the TMM model with a static solution obtained from a finite element model. The statistical evaluation of the results enables a comparison of the dynamic behavior of different drillstring configurations during an early design stage.

AB - To compare the susceptibility of different drillstring assemblies to lateral vibrations while taking parameter uncertainties into consideration, a computationally efficient model based on the transfer matrix method (TMM) in combination with a modal reduction is proposed in this study. Changing boundary conditions along the drilling trajectory are taken into account by combining the linear dynamic analysis from the TMM model with a static solution obtained from a finite element model. The statistical evaluation of the results enables a comparison of the dynamic behavior of different drillstring configurations during an early design stage.

KW - Lateral drillstring vibrations

KW - Monte Carlo simulations

KW - Parameter uncertainties

KW - Robust design

KW - Transfer matrix method

UR - http://www.scopus.com/inward/record.url?scp=85061100741&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-74793-4_15

DO - 10.1007/978-3-319-74793-4_15

M3 - Conference contribution

AN - SCOPUS:85061100741

SN - 978-3-319-74792-7

SN - 978-3-030-09078-4

VL - 3

T3 - Conference Proceedings of the Society for Experimental Mechanics Series (CPSEMS)

SP - 109

EP - 117

BT - Model Validation and Uncertainty Quantification, Volume 3

A2 - Barthorpe, Robert

CY - Cham

T2 - 36th IMAC, A Conference and Exposition on Structural Dynamics 2018

Y2 - 12 February 2018 through 15 February 2018

ER -