Details
| Original language | English |
|---|---|
| Publication status | Published - 15 Aug 2023 |
| Event | SPIE Optical Metrology, 2023, Munich, Germany - München, München, Germany Duration: 26 Jun 2023 → 30 Jun 2023 Conference number: 1262309 |
Conference
| Conference | SPIE Optical Metrology, 2023, Munich, Germany |
|---|---|
| Country/Territory | Germany |
| City | München |
| Period | 26 Jun 2023 → 30 Jun 2023 |
Abstract
Optical triangulation metrology is an essential part of modern industrial quality assurance. Due to their robustness and cost-effectiveness Laser Light Section Sensors have become a widespread solution for geometry inspections. The configuration of a measurement system involves balancing the size of the measurement volume against the accuracy to be achieved. Therefore, in order to provide accurate measurements on a larger scale, it is required to combine several individual measurements of different configurations. This study thus investigates the identification of parameters of a focus-adjustable triangulation sensor. Adaptability of the working distance is achieved by automatic focusing of the camera and repositionability of the laser with a piezo rotation stage and a mirror. The movement of the projected laser plane has to be identified with regard to the tilting angle. This ensures accurate calibration of the measuring system while the working distance being adjustable. Two general approaches are suitable for solving this task: One is based on a simplified identification of the rotational axis of the tilted laser plane. However, this does not take into account the deviations resulting from the offset of the reflection axis on the mirror surface and the rotational axis. This paper extends conventional models by deriving the position of the projected plane from the complete set of all rigid body transformations with regard to the rotation angles. The position of the laser source, the rotation axis and the mirror surface are described in the camera coordinate system. The validity of the extended model is assessed in comparison with a simplified model. Furthermore, the influence of the focusable camera on the calibration of the laser rotation axis is further investigated.
Keywords
- 3D measurement, laser calibration, laser triangulation, optical metrology
ASJC Scopus subject areas
- Materials Science(all)
- Electronic, Optical and Magnetic Materials
- Physics and Astronomy(all)
- Condensed Matter Physics
- Mathematics(all)
- Applied Mathematics
- Engineering(all)
- Electrical and Electronic Engineering
- Computer Science(all)
- Computer Science Applications
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
2023. Abstract from SPIE Optical Metrology, 2023, Munich, Germany, München, Germany.
Research output: Contribution to conference › Abstract › Research
}
TY - CONF
T1 - An extended model for the kinematic identification of a tiltable laser plane in adaptive light-section triangulation
AU - Bossemeyer, Hagen Johannes
AU - Kästner, Markus
AU - Reithmeier, Eduard
N1 - Conference code: 1262309
PY - 2023/8/15
Y1 - 2023/8/15
N2 - Optical triangulation metrology is an essential part of modern industrial quality assurance. Due to their robustness and cost-effectiveness Laser Light Section Sensors have become a widespread solution for geometry inspections. The configuration of a measurement system involves balancing the size of the measurement volume against the accuracy to be achieved. Therefore, in order to provide accurate measurements on a larger scale, it is required to combine several individual measurements of different configurations. This study thus investigates the identification of parameters of a focus-adjustable triangulation sensor. Adaptability of the working distance is achieved by automatic focusing of the camera and repositionability of the laser with a piezo rotation stage and a mirror. The movement of the projected laser plane has to be identified with regard to the tilting angle. This ensures accurate calibration of the measuring system while the working distance being adjustable. Two general approaches are suitable for solving this task: One is based on a simplified identification of the rotational axis of the tilted laser plane. However, this does not take into account the deviations resulting from the offset of the reflection axis on the mirror surface and the rotational axis. This paper extends conventional models by deriving the position of the projected plane from the complete set of all rigid body transformations with regard to the rotation angles. The position of the laser source, the rotation axis and the mirror surface are described in the camera coordinate system. The validity of the extended model is assessed in comparison with a simplified model. Furthermore, the influence of the focusable camera on the calibration of the laser rotation axis is further investigated.
AB - Optical triangulation metrology is an essential part of modern industrial quality assurance. Due to their robustness and cost-effectiveness Laser Light Section Sensors have become a widespread solution for geometry inspections. The configuration of a measurement system involves balancing the size of the measurement volume against the accuracy to be achieved. Therefore, in order to provide accurate measurements on a larger scale, it is required to combine several individual measurements of different configurations. This study thus investigates the identification of parameters of a focus-adjustable triangulation sensor. Adaptability of the working distance is achieved by automatic focusing of the camera and repositionability of the laser with a piezo rotation stage and a mirror. The movement of the projected laser plane has to be identified with regard to the tilting angle. This ensures accurate calibration of the measuring system while the working distance being adjustable. Two general approaches are suitable for solving this task: One is based on a simplified identification of the rotational axis of the tilted laser plane. However, this does not take into account the deviations resulting from the offset of the reflection axis on the mirror surface and the rotational axis. This paper extends conventional models by deriving the position of the projected plane from the complete set of all rigid body transformations with regard to the rotation angles. The position of the laser source, the rotation axis and the mirror surface are described in the camera coordinate system. The validity of the extended model is assessed in comparison with a simplified model. Furthermore, the influence of the focusable camera on the calibration of the laser rotation axis is further investigated.
KW - 3D measurement
KW - laser calibration
KW - laser triangulation
KW - optical metrology
UR - http://www.scopus.com/inward/record.url?scp=85172702149&partnerID=8YFLogxK
U2 - 10.1117/12.2673846
DO - 10.1117/12.2673846
M3 - Abstract
T2 - SPIE Optical Metrology, 2023, Munich, Germany
Y2 - 26 June 2023 through 30 June 2023
ER -