Details
| Original language | English |
|---|---|
| Title of host publication | 2019 International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2019 and 2019 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2019 |
| Subtitle of host publication | Proceedings |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| Pages | 93-99 |
| Number of pages | 7 |
| ISBN (electronic) | 978-1-5386-7687-5 |
| ISBN (print) | 978-1-5386-7688-2 |
| Publication status | Published - Aug 2019 |
| Event | 2019 International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2019 and 2019 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2019 - Istanbul, Turkey Duration: 27 Aug 2019 → 29 Aug 2019 |
Abstract
This paper presents a clamping plate loss model based on surface impedance boundary conditions. The clamping plate surface is discretized using a single loop of nodes. By making a clever choice of boundary conditions instead of modeling an entire pole pitch and only considering the fundamental temporal and spacial harmonic of the field normal to the clamping plate surface, the number of nodes (and elements) required is reduced to around 100, making the proposed method computationally inexpensive. However, the presented loss model requires the knowledge of the flux density normal to the clamping plate, making it only useful in situations where a fast method of obtaining the normal flux density distribution is available. In this paper, three-dimensional time step FEA is used to both validate the proposed loss model and assess the impact of assumptions made in its derivation. For the geometry investigated in this paper, only 61 nodes were required leading to a computing time of 20 ms with an error of 3 % when compared to time step 3D FEA.
Keywords
- Clamping System, End Region Losses, Hydroelectric Power Generation, Surface Impedance Boundary Conditions, Synchronous Generator
ASJC Scopus subject areas
- Engineering(all)
- Mechanical Engineering
- Mathematics(all)
- Control and Optimization
- Energy(all)
- Energy Engineering and Power Technology
- Engineering(all)
- Automotive Engineering
- Engineering(all)
- Electrical and Electronic Engineering
- Engineering(all)
- Industrial and Manufacturing Engineering
Cite this
- Standard
- Harvard
- Apa
- Vancouver
- BibTeX
- RIS
2019 International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2019 and 2019 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2019: Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. p. 93-99 9007128.
Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
}
TY - GEN
T1 - A Novel Surface Impedance Based Clamping Plate Loss Model for Large Synchronous Generators
AU - Fricke, Torben
AU - Schwarz, Babette
AU - Ponick, Bernd
PY - 2019/8
Y1 - 2019/8
N2 - This paper presents a clamping plate loss model based on surface impedance boundary conditions. The clamping plate surface is discretized using a single loop of nodes. By making a clever choice of boundary conditions instead of modeling an entire pole pitch and only considering the fundamental temporal and spacial harmonic of the field normal to the clamping plate surface, the number of nodes (and elements) required is reduced to around 100, making the proposed method computationally inexpensive. However, the presented loss model requires the knowledge of the flux density normal to the clamping plate, making it only useful in situations where a fast method of obtaining the normal flux density distribution is available. In this paper, three-dimensional time step FEA is used to both validate the proposed loss model and assess the impact of assumptions made in its derivation. For the geometry investigated in this paper, only 61 nodes were required leading to a computing time of 20 ms with an error of 3 % when compared to time step 3D FEA.
AB - This paper presents a clamping plate loss model based on surface impedance boundary conditions. The clamping plate surface is discretized using a single loop of nodes. By making a clever choice of boundary conditions instead of modeling an entire pole pitch and only considering the fundamental temporal and spacial harmonic of the field normal to the clamping plate surface, the number of nodes (and elements) required is reduced to around 100, making the proposed method computationally inexpensive. However, the presented loss model requires the knowledge of the flux density normal to the clamping plate, making it only useful in situations where a fast method of obtaining the normal flux density distribution is available. In this paper, three-dimensional time step FEA is used to both validate the proposed loss model and assess the impact of assumptions made in its derivation. For the geometry investigated in this paper, only 61 nodes were required leading to a computing time of 20 ms with an error of 3 % when compared to time step 3D FEA.
KW - Clamping System
KW - End Region Losses
KW - Hydroelectric Power Generation
KW - Surface Impedance Boundary Conditions
KW - Synchronous Generator
UR - http://www.scopus.com/inward/record.url?scp=85081603543&partnerID=8YFLogxK
U2 - 10.1109/acemp-optim44294.2019.9007128
DO - 10.1109/acemp-optim44294.2019.9007128
M3 - Conference contribution
AN - SCOPUS:85081603543
SN - 978-1-5386-7688-2
SP - 93
EP - 99
BT - 2019 International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2019 and 2019 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2019
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2019 International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2019 and 2019 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2019
Y2 - 27 August 2019 through 29 August 2019
ER -