A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage

Research output: Contribution to journalArticleResearchpeer review

Authors

  • Xiaoying Zhuang
  • Runqiu Huang
  • Chao Liang
  • Timon Rabczuk

External Research Organisations

  • Tongji University
  • State Key Laboratory of Geohazard Prevention and Geoenvironment Protection
  • Stanford University
  • Bauhaus-Universität Weimar
  • Korea University
View graph of relations

Details

Original languageEnglish
Article number179169
Number of pages11
JournalMathematical Problems in Engineering
Volume2014
Publication statusPublished - 19 Jan 2014
Externally publishedYes

Abstract

Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.

ASJC Scopus subject areas

Sustainable Development Goals

Cite this

A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage. / Zhuang, Xiaoying; Huang, Runqiu; Liang, Chao et al.
In: Mathematical Problems in Engineering, Vol. 2014, 179169, 19.01.2014.

Research output: Contribution to journalArticleResearchpeer review

Zhuang X, Huang R, Liang C, Rabczuk T. A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage. Mathematical Problems in Engineering. 2014 Jan 19;2014:179169. doi: 10.1155/2014/179169
Download
@article{9741cdb0e6d14db4b43b4d70873a18c1,
title = "A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage",
abstract = "Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.",
author = "Xiaoying Zhuang and Runqiu Huang and Chao Liang and Timon Rabczuk",
year = "2014",
month = jan,
day = "19",
doi = "10.1155/2014/179169",
language = "English",
volume = "2014",
journal = "Mathematical Problems in Engineering",
issn = "1024-123X",
publisher = "Hindawi Publishing Corporation",

}

Download

TY - JOUR

T1 - A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage

AU - Zhuang, Xiaoying

AU - Huang, Runqiu

AU - Liang, Chao

AU - Rabczuk, Timon

PY - 2014/1/19

Y1 - 2014/1/19

N2 - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.

AB - Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.

UR - http://www.scopus.com/inward/record.url?scp=84893825113&partnerID=8YFLogxK

U2 - 10.1155/2014/179169

DO - 10.1155/2014/179169

M3 - Article

AN - SCOPUS:84893825113

VL - 2014

JO - Mathematical Problems in Engineering

JF - Mathematical Problems in Engineering

SN - 1024-123X

M1 - 179169

ER -