Loading [MathJax]/extensions/tex2jax.js

SAMSchool for Additive Manufacturing – Sensoren und Aktoren durch Additive Fertigung von gradierten Bauteilen - Ein zentraler Schritt für die Realisierung der digitalen Transformation

Project: Research

Participants

  • Hans Jürgen Maier (Principal Investigator)
  • Roland Johann Lachmayer (Principal Investigator)
  • Henning Ahlers (Co-applicant)
  • Nadja-Carola Bigall (Co-applicant)
  • Henrik Ehlers (Co-Investigator)
  • Marco Fuchs (Co-Investigator)
  • Paul Christoph Gembarski (Co-Investigator)
  • Thomas Hassel (Co-Investigator)
  • Marius Lammers (Co-Investigator)
  • Stephan Kabelac (Co-applicant)
  • Günter Klawitter (Co-applicant)
  • Christian Klose (Co-Investigator)
  • Iryna Mozgova (Co-applicant)
  • Florian Nürnberger (Co-applicant)
  • Franz Renz (Co-applicant)
  • Detlev Ristau (Co-applicant)
  • Thomas Vietor (Co-applicant)
  • Hagen Watschke (Co-Investigator)
  • Nils Waldt (Co-applicant)
  • Christian Weißenfels (Co-Investigator)
  • Volker Wesling (Co-applicant)
  • Henning Wiche (Co-Investigator)
  • Alexander Gordon Wolf (Co-Investigator)
  • Merve Wollweber (Co-applicant)
  • Peter Wriggers (Co-applicant)
  • Lars Jensen (Co-Investigator)
  • Nick Schwarz (Project staff)
  • Gerrit Eckert (Project staff)
  • Robin Kahlfeld (Project staff)
  • Patrik Müller (Project staff)
  • Marjin Joseph Goutier (Project staff)
  • Maraike Gräbner (Project staff)
  • Björn Ole Hill (Project staff)
  • Xiaofei Tang (Project staff)
  • Timon Steinhoff (Project staff)
  • Lennart Vincent Hölscher (Project staff)
  • Johanna Wurst-Köster (Project staff)
  • Arved Ziebehl (Project staff)
  • Ina Meyer (Project staff)

Research Organisations

External collaborative partners

  • Leibniz University Hannover (lead)
  • University of Applied Sciences and Arts Hannover (HsH)
  • Laser Zentrum Hannover e.V. (LZH)
  • Technische Universität Braunschweig
  • Clausthal University of Technology
1 - 20 out of 37Page size: 20
Order:

Publications

  1. 2024

  2. Published

    Active-mixing printhead for on-the-fly composition adjustment of multi component materials in Direct Ink Writing

    Teves, S., Biermann, T., Ziebehl, A., Eckert, G., Hill, B. O., Xia, P., Wollweber, M., Ripken, T., Bigall, N. & Lachmayer, R. J., Jul 2024, In: Additive Manufacturing Letters. 10, 100217.

    Research output: Contribution to journal › Article › Research › peer review

  3. Accepted/In press

    Additive Manufacturing of Metallic Multi-Material Parts: Local Conductivity Adjustment through Functionally Graded Material Transitions of 316L and CuCrZr

    Meyer, I., Glitt, L. & Ehlers, T., 2024, (Accepted/In press).

    Research output: Contribution to conference › Paper › Research › peer review

  4. 2023

  5. Published

    Multi-material laser powder bed fusion additive manufacturing of concentrated wound stator teeth

    Oel, M., Rossmann, J., Bode, B., Meyer, I., Ehlers, T., Hackl, C. M. & Lachmayer, R., Dec 2023, In: Additive Manufacturing Letters. 7, 100165.

    Research output: Contribution to journal › Article › Research › peer review

  6. Published

    Parametric multiphysics study of focus-variable silicone lenses

    Ziebehl, A., Grabe, T., Biermann, T., Xia, P., Teves, S. & Lachmayer, R., 11 Oct 2023, In: Applied optics. 62, 30, p. 7895-7903 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  7. Published

    Simulating water as immersion medium for scanning laser optical tomography and correcting image artifacts due to refractive index mismatch

    Hill, B. O., Ripken, T., Lachmayer, R. J. & Wollweber, M., 6 Sept 2023, Proceedings Volume 12630, Advances in Microscopic Imaging IV. SPIE, p. 1-3 3 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  8. Published

    Development and evaluation of a closed-loop z-axis control strategy for wire-and-arc-additive manufacturing using the process signal

    Hölscher, L. V., Hassel, T. & Maier, H. J., Sept 2023, In: The international journal of advanced manufacturing technology. 128, 3-4, p. 1725-1739 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    Additive manufacturing of multi-material parts: Design guidelines for manufacturing of 316L/CuCrZr in laser powder bed fusion

    Meyer, I., Oel, M., Ehlers, T. & Lachmayer, R., Aug 2023, In: Heliyon. 9, 8, e18301.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    Digital Process Chains for the Anthropometric Individualization of Products

    Müller, P., Steinnagel, C. & Gembarski, P. C., 15 Jul 2023, Proceedings of the Changeable, Agile, Reconfigurable and Virtual Production Conference and the World Mass Customization & Personalization Conference. Galizia, F. G. & Bortolini, M. (eds.). Springer Verlag, p. 74-82 9 p. Chapter 9. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  11. Published

    Simulations of imperfect refractive index matching in Scanning Laser Optical Tomography and a method for correction

    Hill, O., Wollweber, M., Lachmayer, R. & Ripken, T., 16 May 2023, Three-Dimensional and Multidimensional Microscopy: Image Acquisition and Processing XXX. Brown, T. G., Wilson, T. & Waller, L. (eds.). SPIE, 1238509. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 12385).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  12. Published

    Additive Manufacturing of Metallic Multi-Material Parts: Local Conductivity Adjustment through Functionally Graded Material Transitions of 316L and CuCrZr

    Meyer, I., Glitt, L. & Ehlers, T., 2023.

    Research output: Contribution to conference › Poster › Research › peer review

  13. Published

    Design of a Thermo-Hydraulically Optimised Heat Exchanger for Production by Laser Powder Bed Fusion

    Kahlfeld, R., Meyer, I., Kabelac, S., Lachmayer, R., Bode, B. (Editor) & Kaierle, S. (Editor), 2023, p. 129-148. 20 p.

    Research output: Contribution to conference › Paper › Research › peer review

  14. Published

    Development of an algorithm-based approach for Computational Design Synthesis of individualized implants

    Müller, P., Budau, J. P., Gembarski, P. C. & Lachmayer, R. J., 2023, In: Procedia CIRP. 119, p. 1091-1096 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Effect-Engineering by Additive Manufacturing

    Ehlers, T., Meyer, I., Oel, M., Bode, B., Gembarski, P. C. & Lachmayer, R., 2023, Innovative Product Development by Additive Manufacturing 2021. p. 1-19

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  16. Published

    Kurzvorstellung der Prozesskette der Individualisierung einer Endoprothese

    Müller, P., 2023

    Research output: Non-textual form › Audiovisual publication › Communication

  17. Published

    Multi-Material PBF-LB/M Process

    Meyer, I., Messmann, C. O., Oel, M., Ehlers, T. & Lachmayer, R. J., 2023

    Research output: Non-textual form › Audiovisual publication › Research › peer review

  18. Published

    Potentials and Challenges of Generative Design for Additively Manufactured Freeform Optics

    Teves, S., Xia, P., Ziebehl, A., Biermann, T., Grabe, T. & Lachmayer, R. J., 2023, DGaO Proceedings 2023.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  19. Published

    Strukturen in additiv gefertigten Wärmeübertragern: Parameterbasierte Generierung und messtechnische Charakterisierung innerer Gitterstrukturen zur Verbesserung des Wärmeübergangs

    Kahlfeld, R., Meyer, I., Lachmayer, J., Messmann, C. O., Thies, N., Ehlers, T., Kabelac, S. & Lachmayer, R. J., 2023. 12 p.

    Research output: Contribution to conference › Paper › Research › peer review

  20. 2022

  21. Published

    Design Automation of a Patient-Specific Endoprosthesis with Multi- Objective Optimized Lattice Structures

    Müller, P., Gembarski, P. C. & Lachmayer, R., 13 Nov 2022, Innovative Product Development by Additive Manufacturing 2021. Lachmayer, R., Bode, B. & Kaierle, S. (eds.). Springer International Publishing AG, p. 113-128

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  22. Published

    Wire-and-arc-additive-manufacturing of a component with a pre-defined hardness profile

    Hölscher, L. V., Carstensen, T. & Hassel, T., 13 Nov 2022, Innovative Product Development by Additive Manufacturing. Springer Vieweg, p. 23-37

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  23. Published

    Process Integrated Closed-loop Control in Wire-Arc-Additive- Manufacturing

    Hölscher, L. V., Hassel, T. & Maier, H. J., 18 Jul 2022, IIW 2022 International Conference on Welding and Joining: Innovative Welding and Joining Technologies to achieve Carbon Neutrality and promote Sustainable Development. Tokio, Vol. 75. p. 83-86

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Previous 1 2 Next