Organisation placeholder image, no image found

Institute of Measurement and Control Engineering

Organisational unit: Institute

Type of address: Postal address.
An der Universität 1
30823
Garbsen
View graph of relations
241 - 260 out of 400Page size: 20

Publications

  1. 2013
  2. Published

    A device for endoscopic measurements of forming tools with filigree side elements

    Ohrt, C., Matthias, S., Kästner, M. & Reithmeier, E., 2013, Recent Advances in Topography Research. New York, p. 255-276 22 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  3. Published

    A Device for Endoscopic Measurements of Forming Tools with Filigree Side Elements

    Ohrt, C., Kästner, M. & Reithmeier, E., 2013, Proceedings of the 5th International Conference on Optical Measurement Techniques for Structures & Systems²: OPTIMESS2012 : Antwerp, Belgium, 4-5 April 2012. Dirckx, J. & Buytaert, J. A. N. (eds.). Maastricht, p. 273-280

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  4. Published

    A one step vs. a multi step geometric calibration of an optical coherence tomography

    Díaz Díaz, J., Rahlves, M., Majdani, O., Reithmeier, E. & Ortmaier, T., 2013, Design and Quality for Biomedical Technologies VI. SPIE, 85730D. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 8573).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  5. Published

    Assessment of used Turbine Blades on and beneath the Surface for Product Regeneration: Generation of a Damage Model based on Reflection, Geometry Measurement and Thermography

    Krauß, M., Frackowiak, W., Pösch, A., Kästner, M., Reimche, W., Reithmeier, E. & Maier, H. J., 2013.

    Research output: Contribution to conference › Paper › Research › peer review

  6. Published

    Calibration of the Optical Axes of an Image Derotator Using Image Processing and a 6-Axes Parallel Kinematics

    Rohloff, B., Mueller, A., Vynnyk, T., Pape, C. & Reithmeier, E., 2013, 114. Jahrestagung der DGaO. 2 p. (DGaO-Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  7. Published

    Development of a fast measurement system for microstructured surfaces

    Scheuer, R., Mueller, T. & Reithmeier, E., 2013, Applied Industrial Optics: Spectroscopy, Imaging and Metrology, AIO 2013. OSA - The Optical Society, 3 p. (Optics InfoBase Conference Papers).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Evaluation of Worn Surfaces Using Directional Illumination

    Krauß, M., Kästner, M. & Reithmeier, E., 2013, Proceedings of the 5th International Conference on Optical Measurement Techniques for Structures & Systems²: OPTIMESS2012 : Antwerp, Belgium, 4-5 April 2012. Dirckx, J. & Buytaert, J. A. N. (eds.). Maastricht, p. 195-203

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  9. Published

    Fast Detection of Geometry Defects on Free Form Surfaces Using Inverse Fringe Projection

    Pösch, A., Vynnyk, T. & Reithmeier, E., 2013, In: The Journal of the CMSC. 8, 1

    Research output: Contribution to journal › Article › Research

  10. Published

    Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück

    Kästner, M., Hausotte, T., Reithmeier, E., Loderer, A., Ohrt, C. & Sieczkarek, P., 2013, Tagungsband: 2. Workshop Blechmassivumformung, 13. Nov. 2013, [Erlangen]. Merklein, M. (ed.). Bamberg, p. 101-118

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  11. Published

    Fiberskopische Geometriemessung auf Basis der Streifenprojektion

    Ohrt, C., Kästner, M. & Reithmeier, E., 2013, 114. Jahrestagung der DGaO. (DGaO-Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  12. Published

    One image fibrescopic fringe projection with inverse approach

    Ohrt, C., Pösch, A., Kästner, M. & Reithmeier, E., 2013, 11th IMEKO TC14 International Symposium on Measurement and Quality Control: (ISMQC 2013). p. 102-105 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. Published

    Schwingungsanalyse von rotierenden Objekten mit einem optomechanischen Bildderotator

    Rohloff, B., Schwarzendahl, S., Wallaschek, J. & Reithmeier, E., 2013, 3. VDI-Fachtagung Schwingungsanalyse & Identifikation 2013 mit Fachausstellung: Leonberg, 06. und 07. März 2013. Düsseldorf, p. 203-211 (VDI-Berichte; vol. 2191).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  14. Published

    The Need for Psychoacoustics in Active Noise Cancellation

    Priese, S., Bruhnken, C., Voss, D., Peissig, J. & Reithmeier, E., 2013, AIA-DAGA 2013 Merano, 39. Jahrestagung für Akustik. Berlin, p. 1710-1713 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  15. Published

    Towards refractive index corrected optical coherence tomography as a navigation tool for bone surgery

    Rahlves, M., Díaz Díaz, J., Thommes, J., Majdani, O., Roth, B., Ortmaier, T. & Reithmeier, E., 2013, The European Conference on Lasers and Electro-Optics, CLEO_Europe 2013. (Optics InfoBase Conference Papers).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  16. Published

    Verbessertes Stitching von 3D-Mikroskopiedaten auf Grundlage von Simulationsergebnissen

    Engelke, F., Kästner, M. & Reithmeier, E., 2013, 114. Jahrestagung der DGaO. 2 p. (DGaO-Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  17. 2012
  18. Published

    Using inverse fringe projection to speed up the detection of local and global geometry defects on free-form surfaces

    Pösch, A., Vynnyk, T. & Reithmeier, E., 15 Oct 2012, Image Reconstruction from Incomplete Data VII. 7 p. 85000B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8500).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  19. Published

    Estimation of measurement uncertainties using virtual fringe projection technique

    Haskamp, K., Kästner, M., Ohrt, C. & Reithmeier, E., 1 Apr 2012, In: Applied Optics. 51, 10, p. 1516-1520 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    Methodengestützte Referenzvorgehensweise für neue Umformverfahren

    Weckenmann, A., Reithmeier, E., Behrens, B. A., Wartzack, S., Merklein, M., Akkasoglu, G., Ohrt, C., Salfeld, V., Breitsprecher, T., Plügge, B. & Schneider, T., 1 Feb 2012, In: ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb. 107, 1-2, p. 43-47 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Holistic measurement in the sheet-bulk metal forming process with fringe projection

    Ohrt, C., Hartmann, W., Weickmann, J., Kästner, M., Weckenmann, A., Hausotte, T. & Reithmeier, E., Feb 2012, In: Key Engineering Materials. 504-506, p. 1005-1010 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  22. Published

    Numerical Simulation of a Shadow Projection System by Interpolating Diffraction Images

    Haskamp, K., Rahlves, M., Kästner, M. & Reithmeier, E., 25 Jan 2012, In: Technisches Messen. 79, 2, p. 107-114 8 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1...9 10 11 12 13 14 15 16 ...20 Next