Organisation placeholder image, no image found

Institute of Measurement and Control Engineering

Organisational unit: Institute

Type of address: Postal address.
An der Universität 1
30823
Garbsen
View graph of relations
221 - 240 out of 400Page size: 20

Publications

  1. 2014
  2. Published

    2 Project overview

    Denkena, B., Rienäcker, A., Knoll, G., Bach, F., Maier, H. J., Reithmeier, E. & Dinkelacker, F., 11 Aug 2014, Microstructuring of Thermo-Mechanically Highly Stressed Surfaces. p. 2-8 Chapter 2. (Microstructuring of Thermo-Mechanically Highly Stressed Surfaces).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  3. Published

    6 Surface characterisation based on optical metrology

    Reithmeier, E., Kästner, M., Bretschneider, M., Abo-Namous, O. & Engelke, F., 11 Aug 2014, Microstructuring of Thermo-Mechanically Highly Stressed Surfaces: Final Report of the DFG Research Group 576. Springer Nature, p. 93-118 26 p. (Lecture Notes in Production Engineering; vol. Part F1149).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  4. Published

    9 Own publications

    Denkena, B., Rienäcker, A., Knoll, G., Bach, F., Maier, H. J., Reithmeier, E. & Dinkelacker, F., 11 Aug 2014, Microstructuring of Thermo-Mechanically Highly Stressed Surfaces. p. 167-169 Chapter 9. (Microstructuring of Thermo-Mechanically Highly Stressed Surfaces).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  5. Published

    Mechatronic system based on the micro-macro-kinematic principle

    Janz, A., Pape, C. & Reithmeier, E., 18 Jun 2014, In: International Journal of Robotics and Automation. 29, 3, p. 259-267 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  6. Published

    Development of a measurement system for the online inspection of microstructured surfaces in harsh industrial conditions

    Mueller, T., Langmann, B. & Reithmeier, E., 15 May 2014, Optical Sensing and Detection III. SPIE, 8 p. 91411F. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9141).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. Published

    Planar integrated polymer-based optical strain sensor

    Kelb, C., Reithmeier, E. & Roth, B., 7 Mar 2014, MOEMS and Miniaturized Systems XIII. SPIE, 6 p. 89770Y. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8977).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. Published

    Tempering induction hardened 42CrMo4 steel helical gearwheels from residual heat using spray cooling

    Rodman, D., Nürnberger, F., Dalinger, A., Schaper, M., Krause, C., Kästner, M. & Reithmeier, E., 1 Mar 2014, In: Steel research international. 85, 3, p. 415-425 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    6D-measurement system for the position determination of a robot end-effector

    Janz, A., Pape, C. & Reithmeier, E., 2014, Fringe 2013: 7th International Workshop on Advanced Optical Imaging and Metrology. Osten, W. (ed.). Springer Berlin, p. 531-534 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  10. Published

    Data quality estimation from interdependencies for structured light scanners

    Reithmeier, E., 2014, Computational Vision and Medical Image Processing IV - Proceedings of Eccomas Thematic Conference on Computational Vision and Medical Image Processing, VIPIMAGE 2013. Manuel, J., Tavares, R. S. & Jorge, R. M. N. (eds.). p. 191-196 6 p. (Computational Vision and Medical Image Processing IV - Proceedings of Eccomas Thematic Conference on Computational Vision and Medical Image Processing, VIPIMAGE 2013).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  11. Published

    Einsatzpotential einer örtlich aufgelöst messenden Umformkraftsensorik und Qualifizierung zu einem Prozessüberwachungssystem: Ergebnisse eines Vorhabens der industriellen Gemeinschaftsforschung (IGF) gefördert über die Arbeitsgemeinschaft industrieller Forschungsvereinigungen e.V. (AIF) aus Mitteln des Bundesministeriums für Wirtschaft und Energie

    Behrens, B., Nitschke, T., Reithmeier, E. & Li, Y., 2014, Hannover. 60 p. (EFB-Forschungsbericht; vol. 388)

    Research output: Book/Report › Project report/research report › Research

  12. Published

    Potentials of endoscopic fringe projection: A differentiation of measuring video-, fiber- and borescopy

    Ohrt, C., Pösch, A., Kästner, M. & Reithmeier, E., 2014, Fringe 2013: 7th International Workshop on Advanced Optical Imaging and Metrology. Springer Berlin, p. 735-740 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. Published

    Vergleichbarkeitsuntersuchung von optischen und taktilen Messgeräten bezüglich der ISO 25178

    Engelke, F., Kästner, M. & Reithmeier, E., 2014, 115. Jahrestagung der DGaO. (DGaO-Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  14. 2013
  15. Published

    Fringe projection measurement of highly specular objects in presence of multi-reflection

    Poesch, A. & Reithmeier, E., 1 Oct 2013, Computational Vision and Medical Image Processing IV - Proceedings of Eccomas Thematic Conference on Computational Vision and Medical Image Processing, VIPIMAGE 2013. Manuel, J., Tavares, R. S. & Jorge, R. M. N. (eds.). p. 127-132 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  16. Published

    Stitching and Memory-Optimized Processing of Three-Dimensional Riblet Surface Datasets for Oil Channel Tests

    Scheuer, R., Reithmeier, E. & Windeler, N. B., Oct 2013, In: International Journal of Modeling and Optimization. 3, 5, p. 453-457 5 p.

    Research output: Contribution to journal › Article › Research

  17. Published

    Recent Advances in Manufacturing of Riblets on Compressor Blades and Their Aerodynamic Impact

    Lietmeyer, C., Denkena, B., Krawczyk, T., Klin, R., Overmeyer, L., Wojakowski, B., Reithmeier, E., Scheuer, R., Vynnyk, T. & Seume, J. R., Jul 2013, In: Journal of turbomachinery. 135, 3, 041008.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    High resolution measurements of filigree, inner geometries with endoscopic micro fringe projection

    Ohrt, C., Kästner, M. & Reithmeier, E., 13 May 2013, Optical Measurement Systems for Industrial Inspection VIII. 7 p. 878817. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8788).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  19. Published

    Measurement Based Simulation of Microscope Deviations for Evaluation of Stitching Algorithms for the Extension of Fourier - based Alignment

    Engelke, F., Kästner, M. & Reithmeier, E., 13 May 2013, Modeling Aspects in Optical Metrology IV. 10 p. 87890G. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8789).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  20. Published

    Mikrostrukturieren von thermisch gespritzten Mo-Schichten für Anwendungen im Bereich hoher Reib- und Verschleißbeanspruchungen

    Hübsch, C., Erne, M., Möhwald, K., Bach, F. W., Abo-Namous, O., Kästner, M. & Reithmeier, E., 23 Apr 2013, In: Materialwissenschaft und Werkstofftechnik. 44, 4, p. 304-310 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Multi-Scale Inspection of Worn Surfaces for Product Regeneration

    Krauß, M., Kästner, M. & Reithmeier, E., 1 Apr 2013, In: The Journal of the CMSC. 8, 1

    Research output: Contribution to journal › Article › Research

  22. Published

    3D-reconstruction of microstructures on cylinder liners

    Engelke, F., Kästner, M. & Reithmeier, E., 2013, Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2013. Leach, R. & Shore, P. (eds.). p. 132-135 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Previous 1...8 9 10 11 12 13 14 15 ...20 Next