Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Machine Elements and Engineering Design

Organisational unit: Institute

Type of address: Visitor addres
Welfengarten 1 A
30167
Hannover
1 - 339 out of 339Page size: 500
Order:

Publications

  1. 2025

  2. Published

    Biogenic palm oil-based greases with glycerol monostearate and soy wax: A rheological and tribological study

    Nassef, B. G., Moradi, A., Bayer, G., Pape, F., Abouelkasem, Z. A., Rummel, F., Schmölzer, S., Poll, G. & Marian, M., Mar 2025, In: Results in Engineering. 25, 103728.

    Research output: Contribution to journal › Article › Research › peer review

  3. E-pub ahead of print

    Influence of cooling lubricants on mechanical load at the cutting wedge using high-speed microcinematography and an open-contra rotation tribometer

    Denkena, B., Poll, G., Bergmann, B., Pape, F., Nassef, B. & Schenzel, J., Jun 2025, In: CIRP Journal of Manufacturing Science and Technology. 58, p. 40-46 7 p.

    Research output: Contribution to journal › Review article › Research › peer review

  4. E-pub ahead of print

    Towards lifetime lubrication of wind turbine gearboxes: Technical and physical investigations on used oils

    Liu, M., Bayer, G., Reimers, M., Schünemann, W., König, F., Jacobs, G., Schelenz, R., Bader, N., Poll, G. & Marian, M., 3 Feb 2025, (E-pub ahead of print) In: WEAR. 12 p., 205760.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Enhanced mechanical and tribological performance of additively manufactured 316L steel by MoS2-reinforcement

    Ramteke, S. M., Ramos Grez, J. & Marian, M., Jan 2025, In: Materials and design. 249, 13 p., 113562.

    Research output: Contribution to journal › Article › Research › peer review

  6. 2024

  7. Published

    Ti3C2Tx-UHMWPE Nanocomposites: Towards an Enhanced Wear-Resistance of Biomedical Implants

    Rothammer, B., Feile, K., Werner, S., Frank, R., Bartz, M., Wartzack, S., Schubert, D. W., Drummer, D., Detsch, R., Wang, B., Rosenkranz, A. & Marian, M., 25 Dec 2024, In: Journal of Biomedical Materials Research - Part A. 113, 1, 15 p., e37819.

    Research output: Contribution to journal › Article › Research › peer review

  8. E-pub ahead of print

    From Damage to Functionality: Remanufacturing of Thrust Roller Bearings by Tailored Forming

    Saure, F., Pape, F., Poll, G. & Marian, M., 19 Dec 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    From Experimentation to Optimization: Surface Micro-Texturing for Low-Friction and Durable PTFE–Steel Interfaces Under Full Film Lubrication

    Long, R., Hou, J., Zhang, Y., Shang, Q., Ma, C., Pape, F. & Marian, M., 17 Dec 2024, In: Polymers. 16, 24, 20 p., 3505.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    Intelligent fault diagnosis for tribo-mechanical systems by machine learning: Multi-feature extraction and ensemble voting methods

    Shandhoosh, V., Venkatesh S, N., Chakrapani, G., Sugumaran, V., Ramteke, S. M. & Marian, M., 3 Dec 2024, In: Knowledge-based systems. 305, 12 p., 112694.

    Research output: Contribution to journal › Article › Research › peer review

  11. Published

    Effect of contact geometry on lubricant replenishment in grease lubricated rolling contacts

    Jin, X., Li, X., Bai, L., Guo, F., Gao, J. & Poll, G., Dec 2024, In: Tribology international. 200, 12 p., 110077.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    Ti3C2Tx and Mo2TiC2Tx MXenes as additives in synovial fluids : towards an enhanced biotribological performance of 3D-printed implants

    Marian, M., Esteban, C. D. Q., Zambrano, D. F., Ramteke, S. M., Grez, J. R., Wyatt, B. C., Patenaude, J., Wright, B. G., Anasori, B. & Rosenkranz, A., Dec 2024, In: Applied Materials Today. 41, 11 p., 102464.

    Research output: Contribution to journal › Article › Research › peer review

  13. Published

    Prediction of air compressor faults with feature fusion and machine learning

    Nambiar, A., S., N. V., S., A., V., S., Ramteke, S. M. & Marian, M., 25 Nov 2024, In: Knowledge-based systems. 304, 112519.

    Research output: Contribution to journal › Article › Research › peer review

  14. Published

    Application of machine learning for film thickness prediction in elliptical EHL contact with varying entrainment angle

    Tošić, M., Marian, M., Habchi, W., Lohner, T. & Stahl, K., Nov 2024, In: Tribology international. 199, 14 p., 109940.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Combined Effect of Surface Irregularities and Applied Voltage on the Behavior of Hole-Entry Spherical Hybrid Journal Bearings Lubricated With an Electro-Rheological Fluid

    Tomar, A. K., Sahu, K., Sharma, S. C. & Marian, M., Nov 2024, In: Journal of tribology. 146, 11, 11 p., 114101.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts

    Kelley, J., Schneider, V., Poll, G. & Marian, M., Nov 2024, In: Tribology international. 199, 13 p., 109988.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Impact of Oil Supply Conditions on Water Lubrication Assisted With Minimal Secondary Lubricating Medium

    Ji, H., Yu, T., Zhang, X., Guo, F., Liang, P. & Poll, G., Oct 2024, In: Journal of tribology. 146, 10, 12 p., 104601.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Synergistic Effects of Graphene-added Lubricants and Surface Micro-texturing on the Tribological Behavior of Thrust Roller Bearings

    Long, R., Yao, Y., Zhang, L., Shang, Q., Sun, S., Hu, J., Pape, F. & Marian, M., Oct 2024, In: Tribology international. 198, 14 p., 109908.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    2D materials for Tribo-corrosion and -oxidation protection: A review

    Ramteke, S. M., Walczak, M., De Stefano, M., Ruggiero, A., Rosenkranz, A. & Marian, M., Sept 2024, In: Advances in Colloid and Interface Science. 331, 22 p., 103243.

    Research output: Contribution to journal › Review article › Research › peer review

  20. Published

    Influence of the meniscus on wear in grease-lubricated oscillating rolling contacts

    Bayer, G., Wandel, S., Ayromlou, A., Bader, N. & Poll, G., Sept 2024, In: Tribology international. 197, 12 p., 109771.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Wear particle image analysis: feature extraction, selection and classification by deep and machine learning

    Vivek, J., Venkatesh S, N., Mahanta, T. K., V, S., Amarnath, M., Ramteke, S. M. & Marian, M., 26 Jun 2024, In: Industrial Lubrication and Tribology. 76, 5, p. 599-607 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  22. Published

    Effect of Harmful Bearing Currents on the Service Life of Rolling Bearings: From Experimental Investigations to a Predictive Model

    Schneider, V., Krewer, M., Poll, G. & Marian, M., 21 Jun 2024, In: Lubricants. 12, 7, 230.

    Research output: Contribution to journal › Article › Research › peer review

  23. Published

    Effect of chevron-shaped wetting patterns on oil film thickness in cylinder-on-disc contact under starved lubrication or limited lubricant supply

    Liu, Y., Guo, F., Jin, W., Wong, P. L., Jing, Z., Li, X., Poll, G. & Chen, Q., Jun 2024, In: Tribology international. 194, 12 p., 109469.

    Research output: Contribution to journal › Article › Research › peer review

  24. Published

    Tribological and Chemical–Physical Behavior of a Novel Palm Grease Blended with Zinc Oxide and Reduced Graphene Oxide Nano-Additives

    Nassef, M. G. A., Nassef, B. G., Hassan, H. S., Nassef, G. A., Elkady, M. & Pape, F., 28 May 2024, In: Lubricants. 12, 6, 18 p., 191.

    Research output: Contribution to journal › Article › Research › peer review

  25. Published

    Recent Advances in Machine Learning in Tribology

    Marian, M. & Tremmel, S., 9 May 2024, In: Lubricants. 12, 5, 1 p., 168.

    Research output: Contribution to journal › Editorial in journal › Research › peer review

  26. Published

    Optimizing Stainless Steel Bearings: Enhancement of Stainless Steel Bearing Fatigue Life by Low-Temperature Forming

    Bodewig, A. H., Pape, F. & Poll, G., 28 Apr 2024, In: Metals. 14, 5, 14 p., 512.

    Research output: Contribution to journal › Article › Research › peer review

  27. Published

    Investigation of Graphene Platelet-Based Dry Lubricating Film Formation in Tribological Contacts

    Pape, F., 18 Mar 2024, In: Coatings. 14, 3, 17 p., 360.

    Research output: Contribution to journal › Article › Research › peer review

  28. Published

    Eignung von additiven Fertigungsverfahren für die Herstellung dynamischer Dichtungen

    Ebel, T. P., 1 Mar 2024, Hannover. 118 p.

    Research output: Thesis › Doctoral thesis

  29. Published

    Evaluating the Tribological Behaviour in Cutting Operations Using a Modified Ball-on-Disc Open Tribotester

    Nassef, B. G., Pape, F., Poll, G., Schenzel, J., Bergmann, B. & Denkena, B., 28 Feb 2024, In: Lubricants. 12, 3, 17 p., 77.

    Research output: Contribution to journal › Article › Research › peer review

  30. Published

    Starvation in oscillating rolling element bearings

    Wandel, S., 20 Feb 2024, Hannover. 185 p.

    Research output: Thesis › Doctoral thesis

  31. Published

    限量供油条件下微柱阵列束油表面润滑增效特性研究

    Sun, J., Liu, C., Guo, F., Poll, G., Bai, L. & Li, X., Feb 2024, In: Mocaxue Xuebao/Tribology. 44, 2, p. 117-128 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  32. Published

    Fatigue life analysis of deep rolled bearing inner rings

    Breidenstein, B., Poll, G., Pape, F., Bergmann, B., Dechant, S. & Nordmeyer, H., 2024, In: Procedia CIRP. 123, p. 13-17 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  33. Published

    Fundamental and Practical Aspects of Tribology

    Berman, D., Rosenkranz, A. & Marian, M., 2024, 302 p.

    Research output: Book/Report › Monograph › Research › peer review

  34. Published

    Manufacturing and Evaluation of Multimaterial Cylindrical Rolling Bearings by Plasma-Transferred Arc Welding

    Faqiri, Y., Saure, F., Coors, T., Pape, F., Hassel, T. & Poll, G., 2024, Bearing and Transmission Steels Technology: ASTM Selected Technical Papers. Beswick, J. (ed.). ASTM International, p. 201-226 26 p. (ASTM Special Technical Publication; vol. STP 1649).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  35. Published

    Schlupf- und Anschmieruntersuchungen zu vollrolligen, kleinen Zylinderrollenlagern unter radial exzentrischer und axialer Belastung

    Stuhler, P., 2024, Hannover. 125 p.

    Research output: Thesis › Doctoral thesis

  36. Published

    离心力作用下轴承滚道润滑剂流失与定量补油数值模拟

    Gao, J., Yang, P., Li, X., Gao, Z., Guo, F. & Poll, G., 2024, In: Mocaxue Xuebao/Tribology. 44, 9, p. 1184-1191 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  37. 2023

  38. Published

    Enhancement of Lubricant Replenishment Under Limited Lubricant Supply in Rolling Bearings

    Liu, C., Guo, F., Li, X., Wong, P., Poll, G. & Liu, M., 7 Dec 2023, In: Tribology letters. 72, 6.

    Research output: Contribution to journal › Article › Research › peer review

  39. Published

    Process strategies for milling of dimples on tapered roller bearings

    Denkena, B., Bergmann, B., Keitel, M., Wege, C., Poll, G., Kelley, J. & Pape, F., Dec 2023, In: Production Engineering. 17, 6, p. 893–905 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. Published

    Enhancing the Performance of Rapeseed Oil Lubricant for Machinery Component Applications through Hybrid Blends of Nanoadditives

    Nassef, B. G., Pape, F. & Poll, G., 6 Nov 2023, In: Lubricants. 11, 11, 479.

    Research output: Contribution to journal › Article › Research › peer review

  41. Published

    Oscillating rolling element bearings: A review of tribotesting and analysis approaches

    de la Presilla, R., Wandel, S., Stammler, M., Grebe, M., Poll, G. & Glavatskih, S., Oct 2023, In: Tribology international. 188, 108805.

    Research output: Contribution to journal › Review article › Research › peer review

  42. Published

    硬脂酸吸附对轴承限量供油润滑影响*

    Saisheng, F., Feng, G., Zhaogang, J., Xinming, L., Haichao, L. & Poll, G., 27 Sept 2023, In: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering. 59, 15, p. 197-203 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  43. Published

    Direct Sensor Integration on the Raceway of Roller Bearings

    Pape, F., Konopka, D., Coors, T., Poll, G., Steppeler, T., Ottermann, R., Dencker, F. & Wurz, M., Sept 2023, 9 p.

    Research output: Book/Report › Conference proceeding › Research

  44. Published

    Fatigue life prediction of rolling bearings based on damage accumulation considering residual stresses

    Hwang, J. I. & Poll, G., Sept 2023, In: Tribologie und Schmierungstechnik. 70, 4-5, p. 32-39 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  45. Published

    Investigation on the Influence of Residual Stresses due to Cold Forming on Stainless Steel Bearings

    Bodewig, A., Pape, F. & Poll, G., Sept 2023.

    Research output: Contribution to conference › Slides to presentation › Research

  46. Published

    Influence of shielding gas coverage during laser hot-wire cladding with high carbon steel

    Budde, L., Biester, K., Coors, T., Faqiri, M. Y., Lammers, M., Hermsdorf, J., Hassel, T., Pape, F. & Overmeyer, L., Aug 2023, In: International Journal of Advanced Manufacturing Technology. 127, 7-8, p. 3195-3207 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  47. Published

    Wear of Tailored Forming Steels

    Coors, T., Faqiri, Y., Saure, F., Pape, F., Hassel, T. & Poll, G., 4 Jul 2023, In: Advanced engineering materials. 25, 13, 2201740.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    Investigation of the Hardness Development of Molybdenum Coatings under Thermal and Tribological Loading

    Behrens, B., Stockburger, E., Wester, H., Poll, G., Pape, F., Konopka, D. & Heimes, N., 30 Jun 2023, In: Lubricants. 11, 7, 14 p., 283.

    Research output: Contribution to journal › Article › Research › peer review

  49. Published

    Tribological Effects of Metalworking Fluids in Cutting Processes

    Pape, F., Poll, G., Ellersiek, L., Denkena, B. & Liu, H., 16 May 2023, In: Lubricants. 11, 5, 224.

    Research output: Contribution to journal › Article › Research › peer review

  50. Published

    Experimental Investigations on Wear in Oscillating Grease-Lubricated Rolling Element Bearings of Different Size and Type

    Bayer, G., Bartschat, A., Wandel, S., Baust, S. & Poll, G., 8 Mar 2023, In: Lubricants. 11, 3, 120.

    Research output: Contribution to journal › Article › Research › peer review

  51. Published

    Wear Development in Oscillating Rolling Element Bearings

    Wandel, S., Bartschat, A., Glodowski, J., Bader, N. & Poll, G., 7 Mar 2023, In: Lubricants. 11, 3, 117.

    Research output: Contribution to journal › Article › Research › peer review

  52. Published

    On the Elastohydrodynamic Film-Forming Properties of Metalworking Fluids and Oil-in-Water Emulsions

    Liu, H. C., Pape, F., Zhao, Y., Ellersiek, L., Denkena, B. & Poll, G., Feb 2023, In: Tribology letters. 71, 1, 13 p., 10.

    Research output: Contribution to journal › Article › Research › peer review

  53. Published

    Reply to the discussion by Philippon, Martinie, Vergne on “Scale and contact geometry effects in thermal EHL: Twin-disc versus ball-on-disc” by Liu, Zhang, Bader, Venner and Poll in Tribology International

    Liu, H. C. & Poll, G., Feb 2023, In: Tribology international. 180, 108204.

    Research output: Contribution to journal › Article › Research › peer review

  54. Published

    Advancements in monitoring of tribological stress in bearings using thin-film strain gauges

    Konopka, D., Steppeler, T., Ottermann, R., Pape, F., Dencker, F., Poll, G. & Wurz, M., 2023, p. 1623-1634.

    Research output: Contribution to conference › Paper › Research › peer review

  55. Published

    Dichtheit von Radial-Wellendichtringen auf Gegenlaufflächen mit mesoskopischen Strukturen

    Matus, M. P., 2023, Hannover. 177 p.

    Research output: Thesis › Doctoral thesis

  56. Published

    Einfluss hoher Lasten auf das Ermüdungslebensdauerverhalten von Wälzlagern

    Dechant, S., Poll, G., Rüth, L., Foko, F. F. & Koch, O., 2023, VDI Berichte. 2415 ed. p. 279-300 22 p. (VDI Berichte; vol. 2023, no. 2415).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  57. Published

    Experimental investigation and finite element implementation of thermo-chemo-mechanical model in technical elastomers

    Fulari, G. S., 2023, Hannover.

    Research output: Thesis › Doctoral thesis

  58. Published

    Simulation of local contact conditions in the secondary shear zone in dry and wet metal cutting

    Denkena, B., Liu, H. C., Pape, F., Bergmann, B., Poll, G., Schenzel, J. & Ellersiek, L., 2023, In: Procedia CIRP. 117, p. 293-298 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  59. 2022

  60. Published

    Contact Analysis of Wind Turbine Blade Bearings by Means of Finite Element Method and Alternative Slicing Technique

    Buescher, M., Schneider, V., Schelenz, R., Jacobs, G. & Poll, G., Dec 2022, Bearing World Journal. Vol. 7. (Bearing World Journal).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  61. Published

    Investigations on the Specifics of Laser Power Modulation in Laser Beam Welding of Round Bars

    Grajczak, J., Nowroth, C., Coors, T., Twiefel, J., Wallaschek, J., Saure, F., Pape, F., Poll, G., Nothdurft, S., Hermsdorf, J. & Kaierle, S., Dec 2022, In: Lasers in Manufacturing and Materials Processing. 9, 4, p. 469-480 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  62. Published

    Investigations on Additively Manufactured Stainless Bearings

    Coors, T., Faqiri, M. Y., Saure, F., Kahra, C., Büdenbender, C., Peddinghaus, J., Prasanthan, V., Pape, F., Hassel, T., Herbst, S., Nürnberger, F., Wester, H., Uhe, J., Breidenstein, B., Denkena, B., Behrens, B. A., Poll, G. & Maier, H. J., 8 Nov 2022, In: COATINGS. 12, 11, 1699.

    Research output: Contribution to journal › Article › Research › peer review

  63. Published

    Application of Hertzian theory to torus on plane contacts

    Kelley, J., Babaalihaghighi, K., Bader, N., Wege, C., Pape, F. & Poll, G., Nov 2022, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 236, 11, p. 2189-2208 20 p.

    Research output: Contribution to journal › Article › Research › peer review

  64. Published

    Investigation of the possible applications for microtextured rolling bearings

    Kelley, J., Poll, G. & Pape, F., 20 Oct 2022, In: Frontiers in Manufacturing Technology. 2, 1012343.

    Research output: Contribution to journal › Article › Research › peer review

  65. Published

    Modelling the impact of structural flexibility of wheelsets and rails on the wheel-rail contact and the wear

    Kaiser, I., Poll, G. & Vinolas, J., 15 Sept 2022, In: Wear. 504-505, 203445.

    Research output: Contribution to journal › Article › Research › peer review

  66. Published

    Electrical Bearing Damage: A Problem in the Nano- and Macro-Range

    Schneider, V., Behrendt, C., Höltje, P., Cornel, D., Becker-Dombrowsky, F. M., Puchtler, S., Guzmán, F. G., Ponick, B., Jacobs, G. & Kirchner, E., 21 Aug 2022, In: Lubricants. 10, 8, 194.

    Research output: Contribution to journal › Article › Research › peer review

  67. Published

    Nano- and Micro-Tribological Investigations of Boundary Layers on Axial Bearing Washers Tested under WEC Critical Conditions

    Pape, F., Aug 2022, In: Lubricants. 10, 8, 26 p., 198.

    Research output: Contribution to journal › Article › Research › peer review

  68. Published

    Investigations on the residual stress state of stainless steel angular contact ball bearings pre conditioned by cold forming

    Bodewig, A., Pape, F. & Poll, G., 15 Jul 2022.

    Research output: Contribution to conference › Slides to presentation › Research

  69. Published

    Method for In Situ Film Thickness Measurement of Ball Bearings under Combined Loading using Capacitance Measurements

    Schneider, V., Bader, N. F., Liu, H. & Poll, G., Jul 2022, In: Tribology international. 171, 107524.

    Research output: Contribution to journal › Article › Research › peer review

  70. Published

    Functionality Investigations of Dry-Lubricated Molybdenum Trioxide Cylindrical Roller Thrust Bearings

    Konopka, D., Pape, F., Heimes, N., Behrens, B., Möhwald, K. & Poll, G., 26 Apr 2022, In: COATINGS. 12, 5, 591.

    Research output: Contribution to journal › Article › Research › peer review

  71. Published

    Wear in wind turbine pitch bearings—A comparative design study

    Schwack, F., Halmos, F., Stammler, M., Poll, G. & Glavatskih, S., 28 Mar 2022, In: WIND ENERGY. 25, 4, p. 700-718 19 p.

    Research output: Contribution to journal › Article › Research › peer review

  72. Published

    Application of stainless steel bearings with pre-induced residual stresses

    Bodewig, A., Pape, F. & Poll, G., Mar 2022, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Starvation and Relubrication Mechanisms in Grease Lubricated Oscillating Bearings

    Wandel, S., Bader, N. F., Schwack, F., Glodowski, J., Lehnhardt, B. & Poll, G., Jan 2022, In: Tribology international. 165, 107276.

    Research output: Contribution to journal › Article › Research › peer review

  74. Published

    Analyse zum Dichtverhalten von rotierenden Radial-Wellendichtringen

    Pelzer, V., 2022, Hannover. 89 p.

    Research output: Thesis › Doctoral thesis

  75. Published

    Influence of Metal Working Fluids in Cutting Processes

    Pape, F., Liu, H., Ellersiek, L., Kroedel, A., Denkena, B. & Poll, G., 2022, In: Defect and Diffusion Forum (Online). 414, p. 51-57 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  76. Published

    Lebensdauer-Vorhersage für Elastomerbauteile mit variabler Vorspannung und Temperaturabhängigkeit

    El Maanaoui, H., 2022, Hannover. 148 p.

    Research output: Thesis › Doctoral thesis

  77. Published

    Mechanische Hochfrequenzeigenschaften von Elastomeren aus signalverarbeitungsoptimierter Ultraschallspektroskopie

    Maslak, A. M., 2022, Hannover. 155 p.

    Research output: Thesis › Doctoral thesis

  78. Published

    Speed4E: Effizienter Automobiler Antriebsstrang

    Poll, G. & Brieke, T., 2022, In: Konstruktion. 74, 10, p. 68-69 2 p.

    Research output: Contribution to journal › Comment/debate › Research › peer review

  79. Published

    Starvation and Re-lubrication in Oscillating Bearings: Influence of Grease Parameters

    Wandel, S., Bader, N. F., Glodowski, J., Lehnhardt, B. J., Leckner, J., Schwack, F. & Poll, G., 2022, In: Tribology Letters. 70, 4, 114.

    Research output: Contribution to journal › Article › Research › peer review

  80. Published

    Stromdurchgang am Wälzlager

    Schneider, V. & Stockbrügger, J. O., 2022, FVA Forschungsheft. Vol. 1501.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  81. Published

    Untersuchungen zum Einfluss strukturierter Dichtkontaktflächen auf das Betriebsverhalten von Drehdurchführungen mit Rechteckdichtringen

    Schüller, P. M., 2022, Hannover. 178 p.

    Research output: Thesis › Doctoral thesis

  82. 2021

  83. Published

    Two-dimensional generalized non-Newtonian EHL lubrication: Shear rate-based solution versus shear stress-based solution

    Liu, H., Zhang, B. B., Schneider, V., Venner, C. H. & Poll, G., 1 Dec 2021, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 235, 12, p. 2626-2639 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  84. Published

    Auswirkung stochastischer Strukturen in Gegenlaufflächen auf die Funktion von Radialwellendichtringen

    Poll, G. & Matus, M. P., 24 Nov 2021, Forschungsheft 1463 der Forschungsvereinigung Antriebstechnik e.V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  85. Published

    Influence of process-related heat accumulation of laser beam welded 1.7035 round bars on weld pool shape and weld defects

    Grajczak, J., Nowroth, C., Coors, T., Twiefel, J., Wallaschek, J., Saure, F., Pape, F., Poll, G., Nothdurft, S., Hermsdorf, J., Wesling, V. & Kaierle, S., Nov 2021, In: Journal of laser applications. 33, 4, 042007.

    Research output: Contribution to journal › Article › Research › peer review

  86. Published

    On the critical amplitude in oscillating rolling element bearings

    Schwack, F., Schneider, V., Wandel, S., de la Presilla, R. J. & Glavatskih, S., Nov 2021, In: Tribology International. 163, 107154.

    Research output: Contribution to journal › Article › Research › peer review

  87. Published

    Validation of a solvent-based process for the smoothing of additively manufactured 3D models of nasal cavities

    Meile, V., Tymkovych, M., Rusiecki, T., Nosova, Y., Pape, F., Poll, G., Glasmacher, B., Avrunin, O. & Gryshkov, O., 9 Oct 2021, In: Current Directions in Biomedical Engineering. 7, 2, p. 423-426 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  88. Published

    Cavitation and film formation in hydrodynamically lubricated parallel sliders

    Bulut, D., Bader, N. F. & Poll, G., Oct 2021, In: Tribology international. 162, 107113.

    Research output: Contribution to journal › Article › Research › peer review

  89. Published

    Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems

    Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.

    Research output: Contribution to journal › Article › Research › peer review

  90. Published

    Influence of degree of deformation on welding pore reduction in high-carbon steels

    Behrens, B. A., Maier, H. J., Poll, G., Overmeyer, L., Wester, H., Uhe, J., Hassel, T., Pape, F., Lammers, M., Hermsdorf, J., Kaierle, S., Budde, L., Saure, F., Mildebrath, M., Coors, T., Faqiri, M. Y. & Büdenbender, C., Apr 2021, In: Production Engineering. 15, 2, p. 161-168 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  91. Published

    Empirical formulae for the influence of real film thickness distribution on the capacitance of an EHL point contact and application to rolling bearings

    Schneider, V., Liu, H., Bader, N., Furtmann, A. & Poll, G., Feb 2021, In: Tribology International. 154, 106714.

    Research output: Contribution to journal › Article › Research › peer review

  92. Published

    Grease film evolution in rolling elastohydrodynamic lubrication contacts

    Li, X., Guo, F., Poll, G., Fei, Y. & Yang, P., Feb 2021, In: Friction. 9, 1, p. 179-190 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  93. Published

    Scale and contact geometry effects on friction in thermal EHL: twin-disc versus ball-on-disc

    Liu, H., Zhang, B., Bader, N., Venner, C. H. & Poll, G., Feb 2021, In: Tribology International. 154, 106694.

    Research output: Contribution to journal › Article › Research › peer review

  94. Published

    Cavitation and film formation in hydrodynamically lubricated parallel sliding contacts

    Bulut, D., 2021, Hannover. 111 p.

    Research output: Thesis › Doctoral thesis

  95. Published

    Investigation of Contact Mechanics and Friction of Rubber Compounds by Experimental Techniques and Numerical Simulations

    Cugliari, J., 2021, Hannover. 226 p.

    Research output: Thesis › Doctoral thesis

  96. Published

    Investigation of the Scaling of Friction Coefficients from the Nano to the Micro Level for Base Materials and Coatings

    Heimes, N., Pape, F., Konopka, D., Schöler, S., Möhwald, K., Poll, G. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 161-170 10 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  97. Published

    Molybdenum Based Coatings on 100Cr6 Bearing Steel Surfaces

    Schöler, S., Heimes, N., Konopka, D., Behrens, B., Poll, G. & Möhwald, K., 2021, Tagungsband 4. Niedersächsisches Symposium Materialtechnik. 6 p. (Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of materials research and engineering; vol. 10).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  98. 2020

  99. Published

    Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing

    Behrens, B. A., Maier, H. J., Poll, G., Wriggers, P., Aldakheel, F., Klose, C., Nürnberger, F., Pape, F., Böhm, C., Chugreeva, A., Coors, T., Duran, D., Thürer, S. E., Herbst, S., Hwang, J. I., Matthias, T., Heimes, N. & Uhe, J., Dec 2020, In: Production Engineering. 14, 5-6, p. 569-581 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  100. Published

    ToF-SIMS analysis of boundary layers formed under zinc-free antiwear

    Mallach, D., Pape, F., Lipinsky, D. & Arlinghaus, H. F., 16 Oct 2020, In: Industrial Lubrication and Tribology. 72, 8, p. 1013-1017 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  101. Published

    Investigations on tailored forming of aisi 52100 as rolling bearing raceway

    Coors, T., Mildebrath, M., Büdenbender, C., Saure, F., Faqiri, M. Y., Kahra, C., Prasanthan, V., Chugreeva, A., Matthias, T., Budde, L., Pape, F., Nürnberger, F., Hassel, T., Hermsdorf, J., Overmeyer, L., Breidenstein, B., Denkena, B., Behrens, B. A., Maier, H. J. & Poll, G., 13 Oct 2020, In: Metals. 10, 10, p. 1-19 19 p., 1363.

    Research output: Contribution to journal › Article › Research › peer review

  102. Published

    Production-related surface and subsurface properties and fatigue life of hybrid roller bearing components

    Breidenstein, B., Denkena, B., Krödel, A., Prasanthan, V., Poll, G., Pape, F. & Coors, T., 7 Oct 2020, In: Metals. 10, 10, p. 1-17 17 p., 1339.

    Research output: Contribution to journal › Article › Research › peer review

  103. Published

    Numerical simulation and experimental validation of the cladding material distribution of hybrid semi-finished products produced by deposition welding and cross-wedge rolling

    Kruse, J., Mildebrath, M., Budde, L., Coors, T., Faqiri, M. Y., Barroi, A., Stonis, M., Hassel, T., Pape, F., Lammers, M., Hermsdorf, J., Kaierle, S., Overmeyer, L. & Poll, G., 6 Oct 2020, In: Metals. 10, 10, p. 1-23 23 p., 1336.

    Research output: Contribution to journal › Article › Research › peer review

  104. Published

    A study of grease lubricants under wind turbine pitch bearing conditions

    Schwack, F., Bader, N., Leckner, J., Demaille, C. & Poll, G., 15 Aug 2020, In: Wear. 454-455, 203335.

    Research output: Contribution to journal › Article › Research › peer review

  105. Published

    Manufacturing of Large-Diameter Rolling Element Bearings by Steel-Steel Multimaterial Systems

    Coors, T., Mildebrath, M., Pape, F., Hassel, T., Maier, H. J. & Poll, G., 1 Aug 2020, Bearing Steel Technologies: 12th Volume, Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Beswick, J. M. (ed.). ASTM International, p. 277-299 23 p. (ASTM Special Technical Publication; vol. STP 1623).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  106. Published

    Ultrasonic Evaluation of Tailored Forming Components

    Pape, F., Coors, T., Matthias, T., Behrens, B. & Poll, G., 1 Aug 2020, Bearing Steel Technologies: 12th Volume, Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Beswick, J. M. (ed.). ASTM International, p. 300-312 13 p. STP162320190068. (ASTM Special Technical Publication; vol. STP 1623).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  107. Published

    Simplified traction prediction for highly loaded rolling/sliding EHL contacts

    Liu, H., Zhang, B., Bader, N., Venner, C. H. & Poll, G., Aug 2020, In: Tribology International. 148, 106335.

    Research output: Contribution to journal › Article › Research › peer review

  108. Published

    Erkennen und Bewerten von schädlichen Strukturen auf RWDR-Gegenlaufflächen

    Bauer, F., Poll, G., Schiefer, F. & Matus, M. P., 31 Jul 2020, Forschungsheft 1386 der Forschungsvereinigung Antriebstechnik e.V..

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  109. Published

    Studies on the Influence of Residual Stresses on the Fatigue Life of Rolling Bearings in Dependence on the Production Processes

    Pape, F., Coors, T. & Poll, G., 29 Jul 2020, In: Frontiers in Mechanical Engineering. 6, 56.

    Research output: Contribution to journal › Article › Research › peer review

  110. Published

    Characterization of molybdenum based coatings on 100Cr6 bearing steel surfaces

    Schöler, S., Schmieding, M., Heimes, N., Pape, F., Behrens, B., Poll, G. & Möhwald, K., 30 Jun 2020, In: Tribology Online. 15, 3, p. 181-185 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  111. Published

    Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored properties

    Coors, T., Pape, F., Kruse, J., Blohm, T., Beermann, R., Quentin, L., Herbst, S., Langner, J., Stonis, M., Kästner, M., Reithmeier, E., Nürnberger, F. & Poll, G., 9 Jun 2020, In: International Journal of Advanced Manufacturing Technology. 108, 7-8, p. 2409-2417 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  112. Published

    Influences of solid and lubricant thermal conductivity on traction in an EHL circular contact

    Liu, H., Zhang, B., Bader, N., Poll, G. & Venner, C. H., Jun 2020, In: Tribology International. 146, 106059.

    Research output: Contribution to journal › Article › Research › peer review

  113. Published

    Herstellung von Großwälzlagern durch Stahl-Stahl-Werkstoffsysteme: Conference: 23. Umformtechnisches Kolloquium Hannover

    Coors, T., Saure, F., Mildebrath, M., Pape, F., Hassel, T. & Poll, G., 5 Mar 2020, 143 p.

    Research output: Book/Report › Conference proceeding › Research

  114. Published

    Untersuchungen zur Festigkeit von komplex beanspruchten Multimaterialsystemen am Beispiel von Wälzkontaktermüdung

    Coors, T., Pape, F. & Poll, G., 5 Mar 2020, 23. Umformtechnisches Kolloquium Hannover . p. 134

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  115. Published

    Energy-based modelling of adhesive wear in the mixed lubrication regime

    Terwey, J. T., Fourati, M. A., Pape, F. & Poll, G., 6 Feb 2020, In: Lubricants. 8, 2, 16.

    Research output: Contribution to journal › Article › Research › peer review

  116. Published

    Effect of load reduction mechanisms on loads and blade bearing movements of wind turbines

    Stammler, M., Thomas, P., Reuter, A., Schwack, F. & Poll, G., 17 Jan 2020, In: Wind Energy. 23, 2, p. 274-290 17 p.

    Research output: Contribution to journal › Article › Research › peer review

  117. Published

    Concept for enhancing machine elements by residual stresses and tailored forming

    Coors, T., Pape, F. & Poll, G., 2020, Proceedings - 26th International Association for Management of Technology Conference, IAMOT 2017. p. 1792-1802 11 p. (26th International Association for Management of Technology Conference, IAMOT 2017).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  118. Published

    Determination of the flow behavior of the joining zones of hybrid semi-finished products by means of nanoindentation. Düsseldorf, Germany, Nanobruecken 2020, Nanomechanical Testing Conference & Bruker Hysitron User Meeting

    Matthias, T., Heimes, N., Pape, F. & Behrens, B., 2020

    Research output: Book/Report › Conference proceeding › Research

  119. Published

    Experimentelle Untersuchungen zur Schmierstoff-Oberfächen-Wechselwirkung in nasslaufenden Reibsystemen am Beispiel von Synchronisierungen

    Skubacz, T., 2020, Hannover. 189 p.

    Research output: Thesis › Doctoral thesis

  120. Published

    Investigation of Traction Experiment Set Up on the Resulting Traction Curves and Fluid Properties Derived from such Measurements

    Bader, N. F. & Poll, G., 2020, 61. Tribologie Fachtagung 2020, 61. Tribologie-Fachtagung 2020 Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendungen, Gesellschaft für Tribologie e.V.

    Research output: Chapter in book/report/conference proceeding › Entry in reference work › Research

  121. Published

    Näherungslösungen für Reibung und Verschleiß in ölgeschmierten Wälzkontakten unter Berücksichtigung der realen Rheologie

    Terwey, J. T., 2020, Hannover.

    Research output: Thesis › Doctoral thesis

  122. Published

    Traction prediction in rolling/sliding EHL contacts with reference fluids

    Liu, H., 2020, Hannover. 157 p.

    Research output: Thesis › Doctoral thesis

  123. Published

    Untersuchungen zum Betriebsverhalten oszillierender Wälzlager am Beispiel von Rotorblattlagern in Windenergieanlagen

    Schwack, F., 2020, Hannover. 200 p.

    Research output: Thesis › Doctoral thesis

  124. 2019

  125. Published

    Investigations on Graphene Platelets as Dry Lubricant and as Grease Additive for Sliding Contacts and Rolling Bearing Application

    Pape, F. & Poll, G., 19 Dec 2019, In: Lubricants. 8, 1, 3.

    Research output: Contribution to journal › Article › Research › peer review

  126. Published

    Simulation of a steel-aluminum composite material subjected to rolling contact fatigue

    Hwang, J. I., Coors, T., Pape, F. & Poll, G., 6 Dec 2019, In: Lubricants. 7, 12, 109.

    Research output: Contribution to journal › Article › Research › peer review

  127. Published

    Characterisation of Self-Regenerative Dry Lubricated Layers on Mo-Basis by Nano Mechanical Testing

    Mohnfeld, N., Pape, F., Poll, G., Konopka, D., Schöler, S., Möhwald, K. & Behrens, B., 24 Nov 2019, Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Wulfsberg, J. P., Hintze, W. & Behrens, B.-A. (eds.). 1. ed. Berlin, Heidelberg: Springer Vieweg, p. 139-148

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  128. Published

    Computational investigation of crack inducing forces on bearing surfaces regarding the tribofilm structure

    Pape, F., Petzold, M. & Poll, G., 1 Oct 2019, In: International Journal of Computational Methods and Experimental Measurements. 7, 4, p. 340-349 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  129. Published

    Lubricant compatibility of FKM seals in synthetic oils

    Bulut, D., Krups, T., Poll, G. & Giese, U., 22 Jul 2019, In: Industrial Lubrication and Tribology. 72, 5, p. 557-565 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  130. Published

    Theoretical investigations on the fatigue behavior of a tailored forming steel-aluminium bearing component

    Coors, T., Hwang, J. I., Pape, F. & Poll, G., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. 040020. (AIP Conference Proceedings; vol. 2113).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  131. Published

    Enhancement of roller bearing fatigue life by innovative production processes

    Pape, F., Maiss, O., Denkena, B. & Poll, G., 3 Apr 2019, In: Industrial Lubrication and Tribology. 71, 8, p. 1003-1006 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  132. Published

    The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

    Kaiser, I., Poll, G., Voss, G. & Vinolas, J., 3 Apr 2019, In: Vehicle System Dynamics. 57, 4, p. 564-594 31 p.

    Research output: Contribution to journal › Article › Research › peer review

  133. Published

    Crucial role of solid body temperature on elastohydrodynamic film thickness and traction

    Liu, H. C., Zhang, B. B., Bader, N., Guo, F., Poll, G. & Yang, P., Mar 2019, In: Tribology International. 131, p. 386-397 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  134. Published

    Manufacturing and Evaluation of Multi-Material Axial-Bearing Washers by Tailored Forming

    Behrens, B. A., Chugreev, A., Matthias, T., Poll, G., Pape, F., Coors, T., Hassel, T., Maier, H. J. & Mildebrath, M., Feb 2019, In: Metals. 9, 2, 232.

    Research output: Contribution to journal › Article › Research › peer review

  135. Published

    Oszillierende Wälzlager in Windenergieanlagen: Abgrenzung der Schadensmechanismen

    Wandel, S., Schwack, F. & Poll, G., Jan 2019, Gleit- und Wälzlagerungen 2019: Gestaltung - Berechnung - Einsatz. Schweinfurt, Vol. 2348. p. 221-232 12 p. (VDI Berichte).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  136. Published

    Micro- and nanotribological characterization of molybdenum oxide based coatings on 100CR6 bearing steel surfaces

    Konopka, D., Pape, F., Heimes, N., Matthias, T., Schöler, S., Möhwald, K., Behrens, B. & Poll, G., 2019, Proceedings of 10th International Scientific Conference BALTTRIB 2019. p. 308-315 8 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  137. Published

    Surface Properties Inside Pitchers of the Tropical Pitcher Plant Nepenthes

    Poll, G., Behrens, B., Matthias, T. & Pape, F., 2019.

    Research output: Contribution to conference › Poster › Research

  138. Published

    Surface Properties of Tailored Forming Thrust Bearings

    Poll, G., Behrens, B., Chugreev, A., Matthias, T., Pape, F. & Coors, T., 2019.

    Research output: Contribution to conference › Poster › Research

  139. Published

    Untersuchungen zur praktischen Umsetzung von Elastomer-Lagersitzen in Hochdrehzahl-Traktionselektromotoren

    Horn, M., 2019, Hannover. 147 p.

    Research output: Thesis › Doctoral thesis

  140. 2018

  141. Published

    Tribological Study on Tailored-Formed Axial Bearing Washers

    Pape, F., Coors, T., Barroi, A., Hermsdorf, J., Mildebrath, M., Hassel, T., Kaierle, S., Matthias, T., Chugreev, A., Chugreeva, A., Behrens, B. A., Overmeyer, L. & Poll, G., 31 Dec 2018, In: Tribology Online. 13, 6, p. 320-326 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  142. Published

    Tribologische Untersuchungen zur Entstehung von White Etching Cracks (WECs)

    Pape, F., Terwey, J. T., Wiesker, S., Averbeck, S., Muhmann, C., Lipinsky, D., Arlinghaus, H. F., Kerscher, E., Sauer, B. & Poll, G., Dec 2018, In: Forschung im Ingenieurwesen. 82, 4, p. 341-352 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  143. Published

    Untersuchung von maßgeschneiderten Umformbauteilen als tribologisch belastete Maschinenelemente

    Pape, F., Coors, T. & Poll, G., Dec 2018, In: Forschung im Ingenieurwesen/Engineering Research. 82, 4, p. 311-318 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  144. Published

    Influence of contact geometry and thermal behavior on traction

    Bader, N. F., Brieke, T., Terwey, J. T., Liu, H. & Poll, G., Nov 2018.

    Research output: Contribution to conference › Poster › Research

  145. Published

    On the Crucial Role of Solid Body Temperature in EHL Traction

    Liu, H., Zhang, B., Bader, N. F., Guo, F., Yang, P. & Poll, G., Nov 2018, Tagungsband 14. Arnold Tross Kolloquium.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  146. Published

    Finite element simulation and experimental analysis of false brinelling and fretting corrosion

    Schwack, F., Prigge, F. & Poll, G., Oct 2018, In: Tribology International. 126, p. 352-362 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  147. Published

    Tribological Improvement of Angular Contact Ball Bearings Operated under Small Pivoting Angles by Surface Texturing

    Pape, F. & Poll, G., Oct 2018.

    Research output: Contribution to conference › Paper › Research

  148. Published

    Application of tailored forming components as tribologically loaded machine elements

    Poll, G., Pape, F. & Coors, T., Sept 2018, Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendung: Tagungsband 1. p. 39.1-39.5

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  149. Published

    Efficient Calculation of EHL Traction Using Simplified Approaches and Test Results

    Terwey, J. T., Bader, N. F., Liu, H. & Poll, G., Sept 2018, Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendung: Tagungsband 1. p. 10.1-10.5

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  150. Published

    Investigation into the influence of temperature and contact geometry on traction

    Liu, H., Bader, N. F., Brieke, T., Terwey, J. T. & Poll, G., Sept 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  151. Published

    Investigations of boundary layers generated in a micro pin-on-disk tester

    Pape, F., Poll, G., Lipinsky, D., Arlinghaus, H. F. & Mallach, D., Sept 2018.

    Research output: Contribution to conference › Paper › Research

  152. Published

    Tribological Models of Fluids

    Poll, G., Terwey, J. T., Schwarze, H., Brouwer, L., Neupert, T. & Bartel, D., Sept 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  153. Published

    Fatigue life calculation of load-adapted hybrid angular contact ball bearings

    Pape, F., Coors, T., Wang, Y. & Poll, G., 15 Jul 2018, Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018. Abdel Wahab, M. (ed.). Pleiades Publishing, p. 401-414 14 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  154. Published

    Numerical calculation of local adhesive wear in machine elements under boundary lubrication considering the surface roughness

    Terwey, J. T., Berninger, S., Burghardt, G., Jacobs, G. & Poll, G., 15 Jul 2018, Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018. Pleiades Publishing, p. 796-807 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  155. Published

    Load distribution in a roller-type rotor blade bearing

    Stammler, M., Baust, S., Reuter, A. & Poll, G., 19 Jun 2018, In: Journal of Physics: Conference Series. 1037, 4, 042016.

    Research output: Contribution to journal › Conference article › Research › peer review

  156. Published

    Cycle counting of roller bearing oscillations: case study of wind turbine individual pitching system

    Stammler, M., Reuter, A. & Poll, G., Jun 2018, In: Renewable Energy Focus. 25, p. 40-47 8 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  157. Published

    Graphenbasierte Schmierung von Wälzlagern

    Pape, F., Poll, G., Knigge, S. R. & Glasmacher, B., Jun 2018, In: Tribologie und Schmierungstechnik. 66, 3, p. 26-31 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  158. Published

    ZDDP containing tribofilms generated under sliding micro contact and bearing test rig conditions

    Pape, F., Muhmann, C., Pahl, D., Lipinsky, D., Arlinghaus, H. F. & Poll, G., 24 May 2018, In: Materials Performance and Characterization. 7, 3, 191 p.

    Research output: Contribution to journal › Article › Research › peer review

  159. Published

    Efficient Calculation of Fluid Traction Curves Using Simplified Approaches and Test Results

    Terwey, J. T., Bader, N. F., Liu, H. & Poll, G., May 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  160. Published

    Lebensdaueruntersuchungen und Oberflächenanalytik zur Charakterisierung tribologischer Systeme

    Poll, G. & Pape, F., Apr 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  161. Published

    Sonderforschungsbereich 1153, Wälzfestigkeit

    Poll, G., Coors, T. & Pape, F., Apr 2018.

    Research output: Contribution to conference › Poster › Research

  162. Published

    Friction torque of wind-turbine pitch bearings – comparison of experimental results with available models

    Stammler, M., Schwack, F., Bader, N., Reuter, A. & Poll, G., 14 Mar 2018, In: Wind Energy Science. 3, 1, p. 97-105 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  163. Published

    Investigations on the frictional behavior of soft and hard contact lenses by nanoscratch studies

    Poll, G., Pape, F., Matthias, T. & Behrens, B., Feb 2018.

    Research output: Contribution to conference › Poster › Research

  164. Published

    Analyse der Bauteilbewegungen und Verschleißuntersuchungen an Synchronisierungen im nicht geschalteten Zustand

    Poll, G. & Niemeier, M. A., 2018, Forschungsheft 1312 der Forschungsvereinigung Antriebstechnik e. V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  165. Published

    Beanspruchung von Kupplungskörpern

    Pfeifer, B., 2018, Hannover. 115 p.

    Research output: Thesis › Doctoral thesis

  166. Published

    Capacitance Measurement of Film Thickness in EHL contacts

    Bader, N. F., Liu, H., Furtmann, A., Zhang, B. & Poll, G., 2018, Proceedings. p. 77-78

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  167. Published

    Computational approach to improve bearings by residual stresses based on their required bearing fatigue life

    Pape, F., Maiss, O., Denkena, B. & Poll, G., 2018, In: International Journal of Computational Methods and Experimental Measurements. 6, 4, p. 656-666 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  168. Published

    Enhancing Machine Elements by Residual Stresses, Optimized Surfaces and Tailored Forming

    Poll, G., Coors, T. & Pape, F., 2018, Proceedings. p. 277-278

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  169. Published

    Erweiterung der Wälzlagerberechnung in FVA-Software (FVA 701 III)

    Poll, G., Schneider, V., Stahl, K. & Zander, M., 2018.

    Research output: Contribution to conference › Paper › Research

  170. Published

    Experimentelle und theoretische Untersuchungen zum Reibverhalten elastomerer Werkstoffe auf rauen Oberflächen

    Lang, A., 2018, Hannover. 235 p.

    Research output: Thesis › Doctoral thesis

  171. Published

    Friction reduction and reliable sealing with rotating radial shaft seals

    Pelzer, V. & Poll, G., 2018, p. 133-141. 9 p.

    Research output: Contribution to conference › Paper › Research › peer review

  172. Published

    Herstellungsprozess und Wälzfestigkeit von hybriden Hochleistungsbauteilen

    Mildebrath, M., Maier, H. J., Hassel, T., Coors, T., Pape, F., Poll, G., Barroi, A., Lammers, M., Hermsdorf, J. & Overmeyer, L., 2018, In: Konstruktion. 70, 9, p. 84-89 6 p.

    Research output: Contribution to journal › Review article › Research

  173. Published

    Improvement of the frictional properties of angular contact ball bearings operating under small pivoting angles by surface texturing

    Poll, G., Pape, F., Maiß, O., Lucas, H. & Denkena, B., 2018, Proceedings.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  174. Published

    Investigation of the Lubricant Distribution in a High-Speed Gearbox

    Poll, G. & Friedl, A., 2018, Proceedings. p. 179-179

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  175. Published

    Kontinuierliche Messung des Rückförderverhaltens von Radialwellendichtungen

    Poll, G., Matus, M. P., Pelzer, V. & Wennehorst, B., 2018.

    Research output: Contribution to conference › Paper › Research

  176. Published

    Radial Lip Seal Aging in Synthetic Oil

    Poll, G., Bulut, D., Giese, U. & Seibel, T., 2018, Proceedings. p. 33-34

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  177. Published

    Radially Preloaded Cylindrical Roller Bearings: Optimized Preload and Operating Performance

    Poll, G. & Böttcher, R., 2018, Proceedings. p. 85-86

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  178. Published

    Radially preloaded cylindrical roller bearings – experimental studies regarding axial roller kinematic

    Poll, G. & Böttcher, R., 2018, Proceedings.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  179. Published

    Rotor blade bearing lubrication, wear and failure mechanisms

    Poll, G., 2018.

    Research output: Contribution to conference › Paper › Research

  180. Published

    Schutzdichtungen für Wälzlager III.

    Poll, G. & Poltavchenko, V., 2018, Forschungsheft 1315 der Forschungsvereinigung Antriebstechnik e. V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  181. Published

    Solutions to reduce wear in wind turbine blade bearings

    Poll, G., Schwack, F., Pape, F., Stammler, M. & Barschat, A., 2018, Proceedings. Vol. 2.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  182. Published

    The Measurement of Lubricant Film Thickness in Rectangular Seal Rings by using Fluorescence Method

    Poll, G. & Bulut, D., 2018.

    Research output: Contribution to conference › Paper › Research

  183. Published

    Traction in EHL-Contacts - the influence of local fluid rheology and temperatures

    Bader, N., 2018, Hannover.

    Research output: Thesis › Doctoral thesis

  184. Published

    Tribological Investigations on Tailored Formed Axial Bearing Washers

    Poll, G., Pape, F., Coors, T., Barroi, A., Hermsdorf, J., Kaierle, S., Matthias, T., Bonk, C., Chugreeva, A., Bonhage, M., Bouguecha, A., Behrens, B., Overmeyer, L., Mildebrath, M. & Hassel, T., 2018.

    Research output: Contribution to conference › Paper › Research

  185. Published

    Untersuchungen zum Betriebsverhalten radial vorgespannter Zylinderrollenlager

    Böttcher, R., 2018, Hannover. 155 p.

    Research output: Thesis › Doctoral thesis

  186. 2017

  187. Published

    Boundary layers on bearing raceways subject to operating conditions with high risk of white etching cracks related premature rolling contact fatigue

    Poll, G., Lipinsky, D., Muhmann, C., Pape, F., Möbes, G. & Arlinghaus, H. F., Dec 2017, In: Bearing World Journal. 2, p. 59-70

    Research output: Contribution to journal › Article › Research

  188. Published

    FE-Simulation eines Schrägkugellagers in oszillierender Anwendung

    Prigge, F., Schwack, F. & Poll, G., Sept 2017, Tagungsband Reibung, Schmierung und Verschleiß. p. 3/1-3/6

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  189. Published

    Traction and local temperatures measured in an elastohydrodynamic lubrication contact

    Bader, N., Wang, D. & Poll, G., Sept 2017, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 231, 9, p. 1128-1139 12 p.

    Research output: Contribution to journal › Article › Research

  190. Published

    Steigerung der Ermüdungslebensdauer von Wälzlagern durch eine innovative Hartbearbeitung

    Denkena, B., Maiß, O., Grove, T. & Poll, G., Aug 2017, In: antriebstechnik. 59, p. 61-65

    Research output: Contribution to journal › Article › Research

  191. Published

    Influence of Residual Stresses Introduced by Manufacturing Processes on Bearing Endurance Time

    Pape, F., Neubauer, T., Maiß, O., Denkena, B. & Poll, G., Jun 2017, In: Tribology letters. 65, 2, 70.

    Research output: Contribution to journal › Article › Research › peer review

  192. Published

    Multi-scale modelling of minutely vibrating point-contacts

    Prigge, F., Schwack, F., Bader, N. F. & Poll, G., 18 Apr 2017.

    Research output: Contribution to conference › Paper › Research

  193. Published

    Investigations into mechanical and chemical properties of boundary tribolayers and their correlation to rolling contact fatigue

    Poll, G., Pape, F., Lipinsky, D., Muhmann, C. & Arlinghaus, H. F., 9 Mar 2017, Proceedings Antriebstechnischs Kolloquium (ATK) 2017.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  194. Published

    Soft micro-elastohydrodynamic lubrication and friction at rough conformal contacts

    Wennehorst, B. & Poll, G., 1 Mar 2017, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 231, 3, p. 302-315 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  195. Published

    Konzept für die tribologische Bewertung von hybriden Tailored Forming-Bauteilen

    Coors, T., Pape, F. & Poll, G., Mar 2017.

    Research output: Contribution to conference › Paper › Research

  196. Published

    Auswirkung stochastischer Strukturen in Gegenlaufflächen auf die Dichtfunktion von Radialwellendichtringen

    Poll, G. & Matus, M. P., 2017, Tagungsband Reibung, Schmierung und Verschleiß. Vol. 1. p. 20/1-20/4

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  197. Published

    Bei schnell rotierendem Gehäuse betriebssicher abdichten: rotierende RWR

    Poll, G. & Pelzer, V., 2017, Tagungsband Reibung, Schmierung und Verschleiß, . p. 21/1-21/5

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  198. Published

    Capacitances and lubricant film thicknesses of grease and oil lubricated bearings

    Bader, N., Furtmann, A., Tischmacher, H. & Poll, G., 2017.

    Research output: Contribution to conference › Paper › Research › peer review

  199. Published

    Dichtungsbeständigkeit in synthetischen Ölen

    Poll, G., Bulut, D., Seibel, T. & Giese, U., 2017.

    Research output: Contribution to conference › Paper › Research

  200. Published

    Efficiency optimization and investigation of the lubricant distribution in a high-speed gearbox as part of the speed2E project

    Poll, G., Seefisch, C. A. & Friedl, A., 2017. 3 p.

    Research output: Contribution to conference › Paper › Research

  201. Published

    Electrical stress and parasitic currents in machine elements of drive trains with voltage source inverters

    Furtmann, A. & Poll, G., 2017, VDI Berichte. 2294 ed. p. 1574-1583 10 p. (VDI Berichte; vol. 2017, no. 2294).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  202. Published

    Elektrisches verhalten von gleitlagern in antriebssystemen mit spannungszwischenkreisumrichtern

    Furtmann, A. & Poll, G., 2017, In: VDI Berichte. 2017, 2308, p. 73-82 10 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  203. Published

    Elektrisches Verhalten von Maschinenlementen im Antriebsstrang

    Furtmann, A., 2017, Hannover.

    Research output: Thesis › Doctoral thesis

  204. Published

    Entwicklung eines Lebensdauer-Vorhersagekonzepts für Elastomerwerkstoffe unter Berücksichtigung der Fehlstellenstatistik

    Ludwig, M., 2017, Hannover.

    Research output: Thesis › Doctoral thesis

  205. Published

    Frictional work in oscillating bearings: simulation of an angular contact ball bearing under dry conditions and small amplitudes

    Schwack, F., Prigge, F. & Poll, G., 2017. 4 p.

    Research output: Contribution to conference › Paper › Research

  206. Published

    Generation of ZDDP Containing Tribofilms under Sliding Micro Contact Conditions

    Poll, G., Pape, F., Lipinsky, D. & Arlinghaus, H. F., 2017.

    Research output: Contribution to conference › Slides to presentation › Research

  207. Published

    Grease performance in blade bearings for wind turbine applications: experimental results of scaled tests

    Schwack, F., Bader, N. F., Halmos, F. & Poll, G., 2017.

    Research output: Contribution to conference › Paper › Research

  208. Published

    Investigation of the temperature influence on the formation of boundary layers on bearings

    Pape, F., Poll, G., Lipinsky, D., Muhmann, C., Arlinghaus, H. F. & Möbes, G., 2017, In: Tribologie und Schmierungstechnik. 64, 5, p. 39-64

    Research output: Contribution to journal › Article › Research

  209. Published

    New method for estimating the sealing quality of rotating seals

    Pelzer, V. & Poll, G., 2017.

    Research output: Contribution to conference › Paper › Research › peer review

  210. Published

    Radially Preloaded Cylindrical Roller Bearings: Operating Performance and Optimized Preload

    Poll, G. & Böttcher, R., 2017, In: Bearing World Journal. 2, p. 35-41

    Research output: Contribution to journal › Article › Research

  211. Published

    Refining and enhancing the modelling of vehicle-track- interaction

    Kaiser, I., 2017, Hannover. 396 p.

    Research output: Thesis › Doctoral thesis

  212. Published

    Reibungsminderung bei Wälzlagern und Gleichlaufgelenken durch eine innovative Hartbearbeitung

    Poll, G., Pape, F., Maiß, O. & Denkena, B., 2017, Sonderband Abschlußkolloquium „Ressourceneffiziente Konstruktionselemente“. p. 21-37

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  213. Published

    Reibungsreduktion Drehdurchführungen, Optimierung und Reibungsreduzierung von Drehdurchführungen

    Poll, G. & Pelzer, V., 2017, Forschungsheft 1207 der Forschungsvereinigung Antriebstechnik e.V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  214. Published

    Selection of Lubricating Greases for Wind Turbine Pitch Bearings

    Schwack, F., Bader, N. F., Poll, G., Halmos, F., Helmedag, S. & Poll, G., 2017.

    Research output: Contribution to conference › Poster › Research › peer review

  215. Published

    Stochastische Strukturen, Auswirkung stochastischer Strukturen von Gegenlaufflächen auf die Funktion von Radialwellendichtringen

    Poll, G. & Matus, M. P., 2017, Forschungsheft 1211 der Forschungsvereinigung Antriebstechnik e.V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  216. Published

    Teilwälzlagerung der Kurbelwelle eines Verbrennungsmotors

    Tack, E., 2017, Hannover.

    Research output: Thesis › Doctoral thesis

  217. Published

    Time-dependent analyses of wear in oscillating bearing applications

    Schwack, F., Byckov, A., Bader, N. & Poll, G., 2017.

    Research output: Contribution to conference › Paper › Research › peer review

  218. Published

    Traction in EHL Contacts based on local temperature measurements

    Bader, N. F. & Poll, G., 2017.

    Research output: Contribution to conference › Paper › Research

  219. Published

    Vergleichende experimentelle Untersuchungen des Schmierfilms im auslassseitigen tribologischen System Ventilführung-Ventilschaft an einem befeuerten Motor unter Benzin- und Erdgasbetrieb

    Heinemann, R. M., 2017, Hannover.

    Research output: Thesis › Doctoral thesis

  220. Published

    Verleihung des Georg-Vogelpohl-Ehrenzeichens an Herrn Dipl.-Ing. (FH) Richard Karbacher

    Poll, G., 2017, In: Tribologie und Schmierungstechnik. 64, 1, p. 5-6 2 p.

    Research output: Contribution to journal › Survey paper › Research › peer review

  221. Published

    Vorgespannte Zylinderrollenlager, Ermittlung von Drehzahlgrenzen vorgespannter Zylinderrollenlager

    Poll, G. & Böttcher, R., 2017, Forschungsheft 1215 der Forschungsvereinigung Antriebstechnik e.V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  222. 2016

  223. Published

    Extended HF equivalent model of a drive train

    Furtmann, A., Tischmacher, H. & Poll, G., 2 Nov 2016, Proceedings: 2016 22nd International Conference on Electrical Machines, ICEM 2016. Institute of Electrical and Electronics Engineers Inc., p. 2244-2250 7 p. 7732834. (Proceedings - 2016 22nd International Conference on Electrical Machines, ICEM 2016).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  224. Published

    Comparison of Life Calculations for Oscillating Bearings Considering Individual Pitch Control in Wind Turbines

    Schwack, F., Stammler, M., Poll, G. & Reuter, A., 3 Oct 2016, In: Journal of Physics: Conference Series. 753, 11, 112013.

    Research output: Contribution to journal › Conference article › Research › peer review

  225. Published

    Micro tribological investigations on dry sliding friction of 100Cr6 axial bearing surfaces

    Pape, F., Gatzen, H. H. & Poll, G., 15 Sept 2016, In: Tribology Online. 11, 5, p. 547-550 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  226. Published

    Evaluation of oil-film thickness along the path of contact in a gear mesh by capacitance measurement

    Furtmann, A. & Poll, G., 30 Apr 2016, In: Tribology Online. 11, 2, p. 189-194 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  227. Published

    Advanced experimental investigation and finite element analysis of rubber friction on model surfaces and rough substrates

    Romano, G., 2016, Hannover.

    Research output: Thesis › Doctoral thesis

  228. Published

    Betriebs- und Lebensdauerverhalten hartgedrehter und festgewalzter Zylinderrollenlager

    Neubauer, T., 2016, Hannover.

    Research output: Thesis › Doctoral thesis

  229. Published

    Einfluss von Oberflächenstrukturen auf das Betriebsverhalten stufenloser Umschlingungsgetriebe

    Mach, N., 2016, Hannover.

    Research output: Thesis › Doctoral thesis

  230. Published

    Grundlagenuntersuchungen zur mechanischen Auslegung von Hochdrehzahl-Traktionselektromotoren für Pkw

    Nabhan, M., 2016, Hannover.

    Research output: Thesis › Doctoral thesis

  231. Published

    Influence of surface structures on the operational behavior of continuously variable transmissions

    Mach, J. N. & Poll, G., 2016, VDI Berichte. p. 919-930 12 p. (VDI Berichte; vol. 2016, no. 2276).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  232. Published

    On Lubrication and Friction in Soft Rough Conformal Sliding Contacts ‐-Experimental and theoretical contributions to the discussion on elastomer shaft seal tribology

    Wennehorst, B., 2016, Hannover.

    Research output: Thesis › Doctoral thesis

  233. 2015

  234. Published

    Reibungsverluste durch die Pleuellagerung von Verbrennungsmotoren – ein Vergleich von Gleit- und Wälzlagern

    Poll, G., Matus, M. P. & von Hollen, J., 2 Dec 2015.

    Research output: Contribution to conference › Paper › Research

  235. Published

    Investigations into the Friction Loss and the Thermal Impact of Protective Seals for Rolling Element Bearings under Harsh Conditions

    Poll, G., Ottink, K. & Matus, M. P., 18 Sept 2015.

    Research output: Contribution to conference › Abstract › Research

  236. Published

    Comment on "History, Origins and Prediction of Elastohydrodynamic Friction" by Spikes and Jie

    Bair, S., Vergne, P., Kumar, P., Poll, G., Krupka, I., Hartl, M., Habchi, W. & Larsson, R., Apr 2015, In: Tribology letters. 58, 1, 8 p., 16.

    Research output: Contribution to journal › Commentary in journal › Research › peer review

  237. Published

    Subsurface material response of hypo eutectoid bearing steels for use in energy saving rolling bearings as a substitute for journal bearings in combustion engines

    Sircar, S. D., Gegner, J., Lang, K. H., Poll, G. & Joos, R., Feb 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. Beswick, J. M. (ed.). ASTM International, p. 564-589 26 p. (ASTM INTERNATIONAL Selected Technical Papers; vol. 1580).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  238. Published

    Increasing the lifetime of roller bearings by using precision deep rolling

    Denkena, B., Grove, T., Maiß, O., Neubauer, T., Poll, G. & Dreier, S., 1 Jan 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. Leach, R. (ed.). p. 373-374 2 p. (Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  239. Published

    Untersuchungen zum tribologischen System "abgedichtetes Wälzlager"

    Ottink, K. & Poll, G., 2015, In: Tribologie und Schmierungstechnik. 62, 3, p. 55-66 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  240. 2014

  241. Published

    Oscillatory and steady shear viscosity: The Cox-Merz rule, superposition, and application to EHL friction

    Bair, S., Yamaguchi, T., Brouwer, L., Schwarze, H., Vergne, P. & Poll, G., Nov 2014, In: Tribology international. 79, p. 126-131 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  242. Published

    Super-Hochdrehzahl-Konzept fur den elektrifizierten Antriebsstrang

    Stahl, K., Idler, S., Poll, G. & Friedl, A., Oct 2014, In: Konstruktion. 66, 10, p. 58 and 90

    Research output: Contribution to journal › Survey paper › Research › peer review

  243. Published

    Affecting the Life Time of Roller Bearings by an Optimal Surface Integrity Design After Hard Turning and Deep Rolling

    Denkena, B., Poll, G., Maiß, O. & Neubauer, T., Jun 2014, Tribology in Manufacturing Processes and Joining by Plastic Deformation. p. 425-434 10 p. (Advanced Materials Research; vol. 966-967).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  244. Published

    Betriebsverhalten von Wälzlagerschutzdichtungen - experimentelle Untersuchungen und Berechnungsansätze

    Ottink, K., 2014, Hannover.

    Research output: Thesis › Doctoral thesis

  245. Published

    Charakterisierung des Einflusses der Topographie auf das Reibwert und Verschleißverhalten von Reibkontakten am Beispiel eines CVT-Getriebes

    Mach, J. N., Drechsler, S., Bartel, D., Poll, G. & Albers, A., 2014, In: Tribologie und Schmierungstechnik. 61, 4, p. 1978 1 p.

    Research output: Contribution to journal › Article › Research › peer review

  246. Published

    Reibungsverluste im Kurbeltrieb von Verbrennungsmotoren - ein Vergleich von Gleit- und Wälzlagern

    Poll, G., Matus, M. P. & von Hollen, J., 2014, Tagungsband Reibung, Schmierung und Verschleiß. Vol. 1. p. 73/1 - 73/15 15 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  247. Published

    Tribological properties of fuel economy gearbox oils

    Bader, N., Wittek, E. C. & Poll, G., 2014, Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2014. Society of Tribologists and Lubrication Engineers, p. 959-973 15 p. (Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2014; vol. 2).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  248. 2013

  249. Published

    Effizienter Finite-Elemente-Ansatz zur Simulation von EHD-Kontakten und Verschleißeffekten in axialbewegten Hydraulikdichtsystemen

    Schmidt, T., André, M., Poll, G. & Ottink, K., 2013, In: Tribologie und Schmierungstechnik. 60, 3, p. 34-41 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  250. Published

    Erweitertes Reibwertmodell zur Berechnung von stufenlosen Umschlingungsgetrieben

    Kruse, T., 2013, Hannover.

    Research output: Thesis › Doctoral thesis

  251. Published

    Fatigue life extension of rolling element bearings by residual stresses induced through surface machining

    Neubauer, T., Poll, G., Denkena, B. & Maiß, O., 2013, 5th World Tribology Congress, WTC 2013. p. 1097-1099 3 p. (5th World Tribology Congress, WTC 2013; vol. 2).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  252. Published

    Investigations into protective seals for ball bearings

    Ottink, K. & Poll, G. W. G., 2013, BHR Group - 22nd International Conference on Fluid Sealing 2013. p. 131-145 15 p. (BHR Group - 22nd International Conference on Fluid Sealing 2013).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  253. Published

    Modeling radial lip seal friction - A FEM-based multi-scale soft micro-elastohydrodynamic lubrication approach

    Wennehorst, B. & Poll, G., 2013, 5th World Tribology Congress, WTC 2013. p. 3029-3032 4 p. (5th World Tribology Congress, WTC 2013; vol. 4).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  254. Published

    Prediction of traction in EHL contacts

    Wang, D. & Poll, G., 2013, 5th World Tribology Congress, WTC 2013. p. 978-979 2 p. (5th World Tribology Congress, WTC 2013; vol. 2).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  255. Published

    Reibung von Kurbelwellen-Wälzlagern

    von Hollen, J., 2013, Hannover.

    Research output: Thesis › Doctoral thesis

  256. Published

    Revisiting soft micro-elastohydrodynamic lubrication: A FEM-based multi-scale approach for modeling radial lip seal friction

    Wennehorst, B. & Poll, G. W. G., 2013, BHR Group - 22nd International Conference on Fluid Sealing 2013. p. 147-159 13 p. (BHR Group - 22nd International Conference on Fluid Sealing 2013).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  257. 2012

  258. Published

    Fluid rheology, traction/creep relationships and friction in machine elements with rolling contacts

    Poll, G. W. G. & Wang, D., Jun 2012, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 226, 6, p. 481-500 20 p.

    Research output: Contribution to journal › Article › Research › peer review

  259. Published

    Advances in micro-laser-melting of the shape-memory alloy NiTi

    Hagemann, R., Pape, F., Noelke, C., Kaierle, S., Wesling, V. & Haferkamp, H., 2012, Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  260. Published

    Capacitance of bearings for electric motors at variable mechanical loads

    Wittek, E. C., Kriese, M., Tischmacher, H., Gattermann, S., Ponick, B. & Poll, G., 2012, Proceedings: 2012 20th International Conference on Electrical Machines, ICEM 2012. p. 1602-1607 6 p. 6350093. (Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  261. Published

    Influence of bearing currents on the bearing lifetime for converter driven machines

    Kriese, M., Wittek, E. C., Gattermann, S., Tischmacher, H., Poll, G. & Ponick, B., 2012, Proceedings: 2012 20th International Conference on Electrical Machines, ICEM 2012. p. 1735-1739 5 p. 6350115. (Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  262. Published

    Investigation of alternative materials to Si for solid state micro joints

    Traisigkhachol, O., Pape, F. & Gatzen, H. H., 2012, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  263. Published

    Investigation, Prediction and Control of Rubber Friction and Stick‐Slip: Experiment, Simulation, Application

    Busse, L., 2012, Hannover.

    Research output: Thesis › Doctoral thesis

  264. Published

    Tribologische Untersuchungen des Systems Ventilsitz-Ventilsitzring

    Messer, M., 2012, Hannover.

    Research output: Thesis › Doctoral thesis

  265. 2011

  266. Published

    Investigations into the tribological characteristics of radial lip seals results of LIF and friction measurements

    Wennehorst, B. & Poll, G. W. G., Apr 2011, In: KGK Kautschuk Gummi Kunststoffe. 64, 4, p. 19-23 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  267. Published

    Oberflächenanalyse der aus additiven gebildeten tribologischen schichten mit der flugzeit-sekundärionenmassenspektrometrie

    Lipinsky, D., Brüning, C., Mayer, C., Arlinghaus, H. F., Skubacz, T. & Poll, G., Mar 2011, In: Tribologie und Schmierungstechnik. 58, 2, p. 29-35 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  268. Published

    Polymerzusätze in wälzlagerfetten

    Gatzen, M. & Poll, G., Mar 2011, In: Tribologie und Schmierungstechnik. 58, 2, p. 42-46 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  269. Published

    Analysis of the lubricant film thickness on rod seals by application of the fluorescence method

    Ottink, K. & Poll, G. W. G., 2011, BHR Group - 21st International Conference on Fluid Sealing. p. 179-190 12 p. (BHR Group - 21st International Conference on Fluid Sealing).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  270. Published

    Einfluss der Elastomer-Schmierstoff-Kombination auf das Betriebsverhalten von Radialwellendichtringen

    Engelke, T., 2011, Hannover.

    Research output: Thesis › Doctoral thesis

  271. Published

    Fabrication and tribological investigation of fullerene C60/C70 reinforced epoxy resin SU-8™

    Pape, F., Rissing, L. & Gatzen, H., 2011, In: Tribologie und Schmierungstechnik.

    Research output: Contribution to journal › Article › Research › peer review

  272. Published

    Früherkennung von Wälzlagerschäden in drehzahlvariablen Windgetrieben

    Hacke, B., 2011, Hannover.

    Research output: Thesis › Doctoral thesis

  273. Published

    Investigations on sliding bearings for micro actuators

    Pape, F., Cvetković, S. & Rissing, L., 2011, Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  274. Published

    Mechanical characterization of machining results for sintered silicon-carbide (SSiC)

    Stompe, M., Cvetković, S., Pape, F. & Rissing, L., 2011, Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  275. Published

    Mischreibung und Verschleiß in Hydraulikdichtsystemen - Modellbildung, Simulation und experimentelle Analyse

    Schmidt, T., 2011, Hannover.

    Research output: Thesis › Doctoral thesis

  276. Published

    Modelling radial lip seal friction - A multi-scale mixed lubrication approach

    Wennehorst, B., Engelke, T. & Poll, G. W. G., 2011, BHR Group - 21st International Conference on Fluid Sealing. p. 207-226 20 p. (BHR Group - 21st International Conference on Fluid Sealing).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  277. 2010

  278. Published

    A transient 2D-finite-element approach for the simulation of mixed lubrication effects of reciprocating hydraulic rod seals

    Schmidt, T., André, M. & Poll, G., Oct 2010, In: Tribology international. 43, 10, p. 1775-1785 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  279. Published

    Capacitances and lubricant film thicknesses of motor bearings under different operating conditions

    Wittek, E. C., Kriese, M., Tischmacher, H., Gattermann, S., Ponick, B. & Poll, G., 2010, 19th International Conference on Electrical Machines, ICEM 2010. 5608142. (19th International Conference on Electrical Machines, ICEM 2010).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  280. Published

    Correlation between performance and boundary layers in high speed bearings lubricated with polymer-enhanced greases

    Gatzen, M. M., Pape, F., Bruening, C., Gatzen, H. H., Arlinghaus, H. F. & Poll, G. W. G., 2010, In: Tribology international.

    Research output: Contribution to journal › Article › Research › peer review

  281. Published

    Creating solid state micro joints through micro machining

    Cvetkovic, S., Pape, F. & Gatzen, H. H., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  282. Published

    Investigation of laminated fabric cages used in rolling bearings by ToF-SIMS

    Gunst, U., Zabel, W. R., Valle, N., Migeon, H. N., Poll, G. & Arlinghaus, H. F., 2010, In: Tribology international. 43, 5-6, p. 1005-1011 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  283. Published

    Investigations on the laser induced polymerization of organic-inorganic hybrid oligomers for micro stereo lithography applications

    Neumeister, A., Carsjens, M., Pape, F., Rissing, L. & Kling, R., 2010, 29th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2010 - Congress Proceedings.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  284. Published

    Prediction of motor bearing currents for converter operation

    Kriese, M., Wittek, E. C., Gattermann, S., Tischmacher, H., Poll, G. & Ponick, B., 2010, 19th International Conference on Electrical Machines, ICEM 2010. 5608127. (19th International Conference on Electrical Machines, ICEM 2010).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  285. Published

    Reibung in hoch belasteten EHD-Wälzkontakten

    Meyer, C., 2010, Hannover.

    Research output: Thesis › Doctoral thesis

  286. Published

    Schiefstellung und Axialschubverhalten von Zylinderrollenlagern

    Keßler, A., 2010, Hannover.

    Research output: Thesis › Doctoral thesis

  287. Published

    Wälzlagerschmierung mit polymerhaltigen Fetten

    Gatzen, M., 2010, Hannover.

    Research output: Thesis › Doctoral thesis

  288. 2009

  289. Published

    Design, Fabrication, and Calibration of Capacitive Air Gap Sensors for the Application in Levitation based Guides in Microactuators

    Denkena, B., Kayapinar, H., Gatzen, H. H. & Pape, F., Dec 2009, IEEE Sensors 2009 Conference - SENSORS 2009. p. 1915-1918 4 p. (Proceedings of IEEE Sensors).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  290. Published

    Frictional investigations on ball bearings lubricated using greases with polymer additives

    Gatzen, M. M., Pape, F., Gatzen, H. H. & Poll, G. W. G., 2009, World Tribology Congress 2009 - Proceedings.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  291. Published

    Investigation of the mechanical behavior of a PU-based coil-coating system with the help of indentation and FE analysis

    Behrens, B., Gatzen, H., Peshekhodov, I. & Pape, F., 2009

    Research output: Book/Report › Monograph › Research › peer review

  292. Published

    Investigation of tribological system surfaces of high-speed rolling element bearings by AES, XPS and SIMS

    Gunst, U., Guillot, J., Valle, N., Zabel, W. R., Migeon, H. N., Poll, G. & Arlinghaus, H. F., 2009, World Tribology Congress 2009 - Proceedings. Japanese Society of Tribologists, p. 816 1 p. (World Tribology Congress 2009 - Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  293. Published

    Investigations into the tribological characteristics of radial lip seals: LIF and friction measurements

    Wennehorst, B. & Poll, G. W. G., 2009, Papers presented at 20th International Conference on Fluid Sealing: Nottingham, UK, 7th - 9th October 2009. Flitney, R. (ed.). p. 213-229 17 p. (BHR Group - 20th International Conference on Fluid Sealing).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  294. Published

    Operating range optimization of a slider with an integrated microactuator (SLIM) for hard disk drives

    Dinulovic, D., Pape, F., Saalfeld, H., Kurniawan, W., Obermeier, E. & Gatzen, H. H., 2009, In: IEEE transactions on magnetics.

    Research output: Contribution to journal › Article › Research › peer review

  295. Published

    Optische Schlupfmessung an rotierenden Wälzlagern und deren Auswertung mit digitaler Bildverarbeitungstechnik

    Mirzaei, S., Fahlbusch, T., Reithmeier, E. & Poll, G., 2009, Gleit- und Wälzlagerungen: Gestaltung, Berechnung, Einsatz ; [Tagung] Wiesloch bei Heidelberg, 9. und 10. Juni 2009. Düsseldorf, p. 91-102 12 p. (VDI-Berichte; vol. 2069).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  296. Published

    Physical properties of boundary layers in angular contact ball bearings lubricated with greases containing polymers

    Gatzen, M. M., Pape, F. & Poll, G. W. G., 2009, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journal › Article › Research › peer review

  297. Published

    Resistance of multilayer diamond-like carbon (DLC) coatings for MEMS applications against oscillating wear

    Pape, F. & Gatzen, H. H., 2009, World Tribology Congress 2009 - Proceedings.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  298. Published

    ToF-SIMS investigations of tribological layers

    Arlinghaus, H. F., Lipinsky, D., Assenkamp, A., Skubacz, T., Poll, G. & Brüning, C., 2009, World Tribology Congress 2009 - Proceedings. p. 725 1 p. (World Tribology Congress 2009 - Proceedings).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  299. Published

    Tribologische Eigenschaften von Wälzlagerschmierfetten bei dauerhaft niedrigen Betriebstemperaturen

    Kuhlmann, J., 2009, Hannover.

    Research output: Thesis › Doctoral thesis

  300. Published

    Verleihung des Georg-Vogelpohl-Ehrenzeichens an Herrn Dr.-Ing. Hermann Münnich

    Poll, G., 2009, In: Tribologie und Schmierungstechnik. 56, 6, p. 5-6 2 p.

    Research output: Contribution to journal › Article › Research › peer review

  301. 2008

  302. Published

    Microscopic investigations into lubricated friction pairs in synchronizers

    Poll, G., Neudörfer, S. & Skubacz, T., May 2008, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 222, 3, p. 451-458 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  303. Published

    A management concept of competencies improvement for students with prior vocational, advanced education, and work experience in technical fields

    Pape, F. & Gatzen, H. H., 2008, PICMET: Portland International Center for Management of Engineering and Technology, Proceedings.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  304. Published

    Einflussfaktoren auf die Leistungsfähigkeit von Mehrfachsynchronisierungen

    Erdmann, K., 2008, Hannover.

    Research output: Thesis › Doctoral thesis

  305. Published

    Nano-scratch studies on diamond-like carbon coatings on various materials applied in micro actuators

    Pape, F., Yildiz-Unveren, H. H., Gatzen, H., Küster, R., Bandorf, R. & Bräuer, G., 2008, In: Tribologie und Schmierungstechnik.

    Research output: Contribution to journal › Article › Research › peer review

  306. Published

    Studies on diamond-like carbon coatings for the application in micro actuators

    Paulkowski, D., Bandorf, R., Achilles, S., Pape, F., Gatzen, H. & Bräuer, G., 2008, In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  307. Published

    Thermomechanische Einflüsse auf die Tribologie von Synchronisierungen

    Neudörfer, S., 2008, Hannover.

    Research output: Thesis › Doctoral thesis

  308. Published

    Untersuchungen von Schleppverlusten an Synchronisierungen

    Skubacz, T., Otto, S. & Poll, G., 2008, VDI Berichte. p. 181-196 16 p. (VDI Berichte; no. 2029).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  309. 2007

  310. Published

    Einfluss von Schmierstoffkontaminationen auf Lebensdauer und Betriebseigenschaften von Wälzlagern

    Wennehorst, B. & Poll, G., Sept 2007, In: Tribologie und Schmierungstechnik. 54, 5, p. 11-17 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  311. Published

    Optimization of the tribological performance of rectangular seals in automotive transmissions

    Gronitzki, M. & Poll, G. W. G., May 2007, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 221, 3, p. 259-270 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  312. Published

    Investigation and Modelling of Rubber Stationary Friction on Rough Surfaces

    Le Gal, A., 2007, Hannover.

    Research output: Thesis › Doctoral thesis

  313. Published

    Properties of three-dimensional precision objects fabricated by using laser based micro stereo lithography

    Neumeister, A., Himmelhuber, R., Materlik, C., Temme, T., Pape, F., Gatzen, H. & Ostendorf, A., 2007, In: Journal of Laser Micro Nanoengineering.

    Research output: Contribution to journal › Article › Research › peer review

  314. 2006

  315. Published

    Prediction of losses in belt-type continuously variable transmission due to sliding between belt and disc

    Poll, G., Kruse, T. & Meyer, C., 1 Mar 2006, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 220, 3, p. 235-242 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  316. Published

    Dieselrangierantrieb für zweiachsige Güterwagen

    Poll, G., Voß, G., Stoltenberg, M. & Kratochwille, R., Mar 2006, In: Zeitschrift für das gesamte System Bahn (ZEVrail). 130, 3, p. 107-115 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  317. Published

    Correlation between model test devices and full bearing tests under grease lubricated conditions

    Baly, H., Poll, G., Cann, P. M. & Lubrecht, A. A., 2006, IUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics. Snidle, R. W. & Evans, H. P. (eds.). Dordrecht, p. 229-240 12 p. (Solid Mechanics and its Applications; vol. 134).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  318. Published

    Modell- und Bauteiluntersuchungen zur Fettschmierung von Wälzlagern

    Baly, H., Kuhlmann, J. & Poll, G., 2006, In: VDI Berichte. 1942, p. 125-139 15 p.

    Research output: Contribution to journal › Review article › Research › peer review

  319. Published

    Untersuchungen zur Funktion und Auslegung von Rechteckdichtringen für Drehdurchführungen

    Gronitzki, M., 2006, Hannover.

    Research output: Thesis › Doctoral thesis

  320. 2005

  321. Published

    Bestimmung und Vorhersage des Verschleißes für die Auslegung von Dichtungen

    Debler, C., 2005, Hannover.

    Research output: Thesis › Doctoral thesis

  322. Published

    Einfluss von Oxidationsinhibitoren auf das Betriebsverhalten fettgeschmierter Wälzlager

    Zabel, W., 2005, Hannover.

    Research output: Thesis › Doctoral thesis

  323. Published

    Life Cycle Engineering and Virtual Product Development: The Role of Tribology

    Poll, G. W., 2005, Life Cycle Tribology. Dowson, D., Priest, M., Dalmaz, G. & Lubrecht, A. A. (eds.). Amsterdam: Elsevier BV, p. 15-28 14 p. (Tribology and Interface Engineering Series; vol. 48).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  324. Published

    Reibung fettgeschmierter Wälzlager

    Baly, H., 2005, Hannover.

    Research output: Thesis › Doctoral thesis

  325. Published

    Strukturoptimierung von Gelenklagergehäusen unter der Berücksichtigung des Laufverhaltens

    Olbrich, M., 2005, Hannover.

    Research output: Thesis › Doctoral thesis

  326. Published

    Wälz- und Gleitlager: Mitentscheidend für den Leichtbau!

    Poll, G., 2005, In: Konstruktion. 7-8, p. 3 1 p.

    Research output: Contribution to journal › Editorial in journal › Research › peer review

  327. Published

    Zum Nutzen schaltbarer Schlingerdämpfer in Trassierungselementen mit veränderlicher Gleiskrümmung

    Kratochwille, R., 2005, Hannover.

    Research output: Thesis › Doctoral thesis

  328. 2004

  329. Published

    Tribosurface and lubricant characterization by ToF-SIMS

    Gunst, U., Zabel, W. R., Poll, G. & Arlinghaus, H. F., Aug 2004, In: Surface and Interface Analysis. 36, 8, p. 1231-1235 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  330. Published

    DGMK-Forschungsbericht 569: Einfluss von Antioxidantien auf die Schmierfettgebrauchsdauer in schnelllaufenden Wälzlagern

    Zabel, W. R. & Poll, G., Mar 2004, (DGMK Forschungsbericht; vol. 569)

    Research output: Book/Report › Project report/research report › Research › peer review

  331. Published

    Analytisch-iteratives Berechnungsverfahren für stufenlose Umschlingungsgetrieb

    Sue, A. & Poll, G., 2004, In: VDI Berichte. 1827, p. 691-712+838-839

    Research output: Contribution to journal › Article › Research › peer review

  332. 2003

  333. Published

    Die Pendelbewegung von Einschienen-Hängebahnen am Beispiel der Wuppertaler Schwebebahn

    Singer, A., 2003, Hannover.

    Research output: Thesis › Doctoral thesis

  334. Published

    Influence of temperature distribution on the tribological performance of automotive synchronisers

    Poll, G. & Spreckels, M., 2003, Tribological Research and Design for Engineering Systems. Dowson, D., Priest, M., Dalmaz, G. & Lubrecht, A. A. (eds.). Elsevier, p. 613-621 9 p. (Tribology Series; vol. 41).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  335. Published

    Investigation into the sealing contacts of reciprocating elastomeric seals: Correlation of calculations with contact force measurements and optical observations

    Debler, C., Gronitzki, M. & Poll, G., 2003, 17th international conference on fluid sealing: papers presented at 17th International conference on fluid sealing. Hoyes, J. (ed.). p. 169-186 18 p. (International Conference on Fluid Sealing).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  336. Published

    Schwingungskompensation durch einen fliehkraftgesteuerten Drehschwingungstilger

    Baron, J. & Poll, G., 2003, Schwingungen in Antrieben 2003: Messung, Simulation, Beeinflussung, Überwachung. Düsseldorf, p. 89-107 19 p. (VDI Berichte; vol. 1749).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  337. Published

    The influence of boundary layer properties on grease lubricated high-speed ball bearing performance

    Wiendl, S. B., Zabel, W. R., Poll, G. & Gatzen, H. H., 2003, Transient Processes in Tribology. Dalmaz, G., Lubrecht, A. A., Dowson, D. & Priest, M. (eds.). Elsevier, p. 441-447 7 p. (Tribology Series; vol. 43).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  338. Published

    Written discussion: Contributions

    Coy, R. C., Taylor, R. I., Maillat, M., Martin, J. M., Olver, A., Drouvin, Y., Honda, F., Tung, S. C., Rahnejat, H., Vignali, J. M., Gurovich, D., Glavatskih, S., Liu, Y., Stoimenov, B. L., Hooke, C., Dwyer-Joyce, R., Wilson, W., Dowson, D., Evans, H. P., Nakahara, T., Lubrecht, A., Messé, S., Dahm, K., Devaux, N., Poll, G., Kernizan, C. F., Priest, M., Li, L., Soom, A., Mordukhovich, G., Torrance, A., Popovici, G., Ohmae, N., Fouvry, S., Ville, F., Robbe-Valloire, F. & Tomanik, E., 2003, In: Tribology Series. 43, p. 827-857 31 p.

    Research output: Contribution to journal › Other contribution to journal › Research › peer review

  339. 2002

  340. Published

    CVT-Wirkungsgradberechnung aus der Verformung beim Umschlingungstrieb

    Sue, A., Dittrich, O. & Poll, G., 2002, CVT 2002 Congress. p. 69-88 20 p. (VDI Berichte; vol. 1709).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  341. Published

    Einfluss der Temperaturverteilung auf das tribologische Verhalten von Synchronisierungen

    Spreckels, M., 2002, Hannover.

    Research output: Thesis › Doctoral thesis

  342. Published

    Simulation der Temperaturverteilung im Reibkontakt von Synchronisierungen mit Hilfe der Finite Elemente Methode

    Spreckels, M. & Poll, G., 2002, In: VDI Berichte. 1701, p. 421-437 17 p.

    Research output: Contribution to journal › Article › Research › peer review

  343. Published

    Wear reduction in light rail systems through asymmetrical railhead profiles

    Brandau, J., Voß, G. & Poll, G., 2002, Boundary and Mixed Lubrication: Science and Applications. Dowson, D., Priest, M., Dalmaz, G. & Lubrecht, A. A. (eds.). Elsevier, p. 305-316 12 p. (Tribology Series; vol. 40).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  344. 2001

  345. Published

    Möglichkeiten zur Wirkungsgradoptimierung von Stufenlosgetrieben

    Sladek, W., 2001, Hannover.

    Research output: Thesis › Doctoral thesis

  346. Published

    Rolling bearing lubrication with grease at low temperatures

    Gerstenberger, J. & Poll, G., 2001, Tribology Research: From Model Experiment to Industrial Problem: A Century of Efforts in Mechanics, Materials Science and Physico-Chemistry. Dalmaz, G., Lubrecht, A. A., Dowson, D. & Priest, M. (eds.). Elsevier, p. 303-312 10 p. (Tribology Series; vol. 39).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  347. 2000

  348. Published

    Korrelation mikrotribologischer Eigenschaften mit dem makroskopischen Reibungsverhalten am Beispiel von Synchronisierungen

    Poll, G., Spreckels, M. & Gronitzki, M., Mar 2000, In: Tribologie und Schmierungstechnik. 47, 2, p. 13-17 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  349. Published

    Untersuchungen zur Auslegung und zum Betriebsverhalten eines fliehkraftgesteuerten frequenzvariablen Drehschwingungstilgers

    Baron, J., 2000, Hannover.

    Research output: Thesis › Doctoral thesis

  350. Published

    Wälzlagerschmierung mit Fett bei niedrigen Temperaturen

    Gerstenberger, J., 2000, Hannover.

    Research output: Thesis › Doctoral thesis

  351. 1999

  352. Published

    Der Einfluss der Schmierfettzusammensetzung auf das tribologische Verhalten schnelllaufender Wälzlager

    Franke, J. E., 1999, Hannover.

    Research output: Thesis › Doctoral thesis

  353. Published

    Extending rolling element bearing life in hydraulic systems with water-based fluids: The grease lubrication option

    Poll, G. W., 1999, In: ASTM Special Technical Publication. 1339, p. 500-519 20 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  354. Published

    Service life and lubrication conditions of different grease types in high-speed rolling bearings

    Franke, E. & Poll, G., 1999, Lubrication at the Frontier: The Role of the Interface and Surface Layers in the Thin Film and Boundary Regime. Dowson, D., Priest, M., Taylor, C. M., Ehret, P., Childs, T. H. C., Dalmaz, G., Berthier, Y., Flamand, L., Georges, J.-M. & Lubrecht, A. A. (eds.). Elsevier, p. 601-609 9 p. (Tribology Series; vol. 36).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  355. Published

    Stationäres Betriebsverhalten stufenlos verstellbarer Umschlingungsmittelgetriebe

    Sattler, H., 1999, Hannover.

    Research output: Thesis › Doctoral thesis

  356. 1998

  357. Published

    Wear behaviour of synchronisers in relation to a duty parameter

    Lösche, T., Paland, E. G. & Poll, G., 1998, Tribology for Energy Conservation. Dowson, D., Taylor, C. M., Childs, T. H. C., Dalmaz, G., Berthier, Y., Flamand, L., Georges, J.-M. & Lubrecht, A. A. (eds.). Amsterdam: Elsevier, p. 95-102 8 p. (Tribology Series; vol. 34).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  358. 1997

  359. Published

    Discussion: “Rotary Lip Seal Operation With an Ingested Meniscus” (Salant, R. F., 1997, ASME J. Tribol., 119, pp. 205–210)

    Poll, G., Oct 1997, In: Journal of tribology. 119, 4, p. 887-888 2 p.

    Research output: Contribution to journal › Commentary in journal › Research › peer review

  360. Published

    Das tribologische Verhalten von Synchronisierungen unter Berücksichtigung des Beanspruchungskollektivs

    Lösche, T., 1997, Hannover.

    Research output: Thesis › Doctoral thesis

  361. 1996

  362. Published

    Schmierfilmbildung in fettgeschmierten schnellaufenden Spindellagern

    Barz, M., 1996, Hannover.

    Research output: Thesis › Doctoral thesis

  363. 1995

  364. Published

    Entwicklung eines Modells zur optimierten Nutzung des Wissenspotentials einer Prozeß-FMEA

    Witter, A., 1995, Hannover.

    Research output: Thesis › Doctoral thesis

  365. Published

    Korrosionsbeständige Wälzlager in wasserhaltigen Hydraulikflüssigkeiten

    Werries, H., 1995, Hannover.

    Research output: Thesis › Doctoral thesis

  366. Published

    Schwingungsuntersuchungen am Synchronriementrieb eines direkteinspritzenden Pkw-Dieselmotors

    Faust, H., 1995, Hannover.

    Research output: Thesis › Doctoral thesis

  367. Published

    Verfahren zur Bestimmung der stationären Betriebstemperatur von Wälzlagerungen

    Baalmann, K., 1995, Hannover.

    Research output: Thesis › Doctoral thesis

  368. 1993

  369. Published

    Betriebsverhalten von CVT-Riementrieben für den Antrieb von Automobilen

    Pietz, A., 1993, Hannover.

    Research output: Thesis › Doctoral thesis

  370. 1992

  371. Published

    Numerisches Verfahren zur Berücksichtigung instationärer Prozesse bei Zuverlässigkeitsprognosen

    Rönnebeck, H., 1992, Hannover.

    Research output: Thesis › Doctoral thesis

  372. 1991

  373. Published

    Untersuchungen zum dynamischen Betriebsverhalten von Freilaufkupplungen

    Roßmanek, P., 1991, Hannover.

    Research output: Thesis › Doctoral thesis