Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Machine Elements and Engineering Design

Organisational unit: Institute

Type of address: Visitor addres
Welfengarten 1 A
30167
Hannover
1 - 160 out of 339Page size: 160
Order:

Publications

  1. 2025

  2. Published

    Biogenic palm oil-based greases with glycerol monostearate and soy wax: A rheological and tribological study

    Nassef, B. G., Moradi, A., Bayer, G., Pape, F., Abouelkasem, Z. A., Rummel, F., Schmölzer, S., Poll, G. & Marian, M., Mar 2025, In: Results in Engineering. 25, 103728.

    Research output: Contribution to journal › Article › Research › peer review

  3. E-pub ahead of print

    Influence of cooling lubricants on mechanical load at the cutting wedge using high-speed microcinematography and an open-contra rotation tribometer

    Denkena, B., Poll, G., Bergmann, B., Pape, F., Nassef, B. & Schenzel, J., Jun 2025, In: CIRP Journal of Manufacturing Science and Technology. 58, p. 40-46 7 p.

    Research output: Contribution to journal › Review article › Research › peer review

  4. E-pub ahead of print

    Towards lifetime lubrication of wind turbine gearboxes: Technical and physical investigations on used oils

    Liu, M., Bayer, G., Reimers, M., Schünemann, W., König, F., Jacobs, G., Schelenz, R., Bader, N., Poll, G. & Marian, M., 3 Feb 2025, (E-pub ahead of print) In: WEAR. 12 p., 205760.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Enhanced mechanical and tribological performance of additively manufactured 316L steel by MoS2-reinforcement

    Ramteke, S. M., Ramos Grez, J. & Marian, M., Jan 2025, In: Materials and design. 249, 13 p., 113562.

    Research output: Contribution to journal › Article › Research › peer review

  6. 2024

  7. Published

    Ti3C2Tx-UHMWPE Nanocomposites: Towards an Enhanced Wear-Resistance of Biomedical Implants

    Rothammer, B., Feile, K., Werner, S., Frank, R., Bartz, M., Wartzack, S., Schubert, D. W., Drummer, D., Detsch, R., Wang, B., Rosenkranz, A. & Marian, M., 25 Dec 2024, In: Journal of Biomedical Materials Research - Part A. 113, 1, 15 p., e37819.

    Research output: Contribution to journal › Article › Research › peer review

  8. E-pub ahead of print

    From Damage to Functionality: Remanufacturing of Thrust Roller Bearings by Tailored Forming

    Saure, F., Pape, F., Poll, G. & Marian, M., 19 Dec 2024, (E-pub ahead of print) In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    From Experimentation to Optimization: Surface Micro-Texturing for Low-Friction and Durable PTFE–Steel Interfaces Under Full Film Lubrication

    Long, R., Hou, J., Zhang, Y., Shang, Q., Ma, C., Pape, F. & Marian, M., 17 Dec 2024, In: Polymers. 16, 24, 20 p., 3505.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    Intelligent fault diagnosis for tribo-mechanical systems by machine learning: Multi-feature extraction and ensemble voting methods

    Shandhoosh, V., Venkatesh S, N., Chakrapani, G., Sugumaran, V., Ramteke, S. M. & Marian, M., 3 Dec 2024, In: Knowledge-based systems. 305, 12 p., 112694.

    Research output: Contribution to journal › Article › Research › peer review

  11. Published

    Effect of contact geometry on lubricant replenishment in grease lubricated rolling contacts

    Jin, X., Li, X., Bai, L., Guo, F., Gao, J. & Poll, G., Dec 2024, In: Tribology international. 200, 12 p., 110077.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    Ti3C2Tx and Mo2TiC2Tx MXenes as additives in synovial fluids : towards an enhanced biotribological performance of 3D-printed implants

    Marian, M., Esteban, C. D. Q., Zambrano, D. F., Ramteke, S. M., Grez, J. R., Wyatt, B. C., Patenaude, J., Wright, B. G., Anasori, B. & Rosenkranz, A., Dec 2024, In: Applied Materials Today. 41, 11 p., 102464.

    Research output: Contribution to journal › Article › Research › peer review

  13. Published

    Prediction of air compressor faults with feature fusion and machine learning

    Nambiar, A., S., N. V., S., A., V., S., Ramteke, S. M. & Marian, M., 25 Nov 2024, In: Knowledge-based systems. 304, 112519.

    Research output: Contribution to journal › Article › Research › peer review

  14. Published

    Application of machine learning for film thickness prediction in elliptical EHL contact with varying entrainment angle

    Tošić, M., Marian, M., Habchi, W., Lohner, T. & Stahl, K., Nov 2024, In: Tribology international. 199, 14 p., 109940.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Combined Effect of Surface Irregularities and Applied Voltage on the Behavior of Hole-Entry Spherical Hybrid Journal Bearings Lubricated With an Electro-Rheological Fluid

    Tomar, A. K., Sahu, K., Sharma, S. C. & Marian, M., Nov 2024, In: Journal of tribology. 146, 11, 11 p., 114101.

    Research output: Contribution to journal › Article › Research › peer review

  16. Published

    Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts

    Kelley, J., Schneider, V., Poll, G. & Marian, M., Nov 2024, In: Tribology international. 199, 13 p., 109988.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Impact of Oil Supply Conditions on Water Lubrication Assisted With Minimal Secondary Lubricating Medium

    Ji, H., Yu, T., Zhang, X., Guo, F., Liang, P. & Poll, G., Oct 2024, In: Journal of tribology. 146, 10, 12 p., 104601.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Synergistic Effects of Graphene-added Lubricants and Surface Micro-texturing on the Tribological Behavior of Thrust Roller Bearings

    Long, R., Yao, Y., Zhang, L., Shang, Q., Sun, S., Hu, J., Pape, F. & Marian, M., Oct 2024, In: Tribology international. 198, 14 p., 109908.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    2D materials for Tribo-corrosion and -oxidation protection: A review

    Ramteke, S. M., Walczak, M., De Stefano, M., Ruggiero, A., Rosenkranz, A. & Marian, M., Sept 2024, In: Advances in Colloid and Interface Science. 331, 22 p., 103243.

    Research output: Contribution to journal › Review article › Research › peer review

  20. Published

    Influence of the meniscus on wear in grease-lubricated oscillating rolling contacts

    Bayer, G., Wandel, S., Ayromlou, A., Bader, N. & Poll, G., Sept 2024, In: Tribology international. 197, 12 p., 109771.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Wear particle image analysis: feature extraction, selection and classification by deep and machine learning

    Vivek, J., Venkatesh S, N., Mahanta, T. K., V, S., Amarnath, M., Ramteke, S. M. & Marian, M., 26 Jun 2024, In: Industrial Lubrication and Tribology. 76, 5, p. 599-607 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  22. Published

    Effect of Harmful Bearing Currents on the Service Life of Rolling Bearings: From Experimental Investigations to a Predictive Model

    Schneider, V., Krewer, M., Poll, G. & Marian, M., 21 Jun 2024, In: Lubricants. 12, 7, 230.

    Research output: Contribution to journal › Article › Research › peer review

  23. Published

    Effect of chevron-shaped wetting patterns on oil film thickness in cylinder-on-disc contact under starved lubrication or limited lubricant supply

    Liu, Y., Guo, F., Jin, W., Wong, P. L., Jing, Z., Li, X., Poll, G. & Chen, Q., Jun 2024, In: Tribology international. 194, 12 p., 109469.

    Research output: Contribution to journal › Article › Research › peer review

  24. Published

    Tribological and Chemical–Physical Behavior of a Novel Palm Grease Blended with Zinc Oxide and Reduced Graphene Oxide Nano-Additives

    Nassef, M. G. A., Nassef, B. G., Hassan, H. S., Nassef, G. A., Elkady, M. & Pape, F., 28 May 2024, In: Lubricants. 12, 6, 18 p., 191.

    Research output: Contribution to journal › Article › Research › peer review

  25. Published

    Recent Advances in Machine Learning in Tribology

    Marian, M. & Tremmel, S., 9 May 2024, In: Lubricants. 12, 5, 1 p., 168.

    Research output: Contribution to journal › Editorial in journal › Research › peer review

  26. Published

    Optimizing Stainless Steel Bearings: Enhancement of Stainless Steel Bearing Fatigue Life by Low-Temperature Forming

    Bodewig, A. H., Pape, F. & Poll, G., 28 Apr 2024, In: Metals. 14, 5, 14 p., 512.

    Research output: Contribution to journal › Article › Research › peer review

  27. Published

    Investigation of Graphene Platelet-Based Dry Lubricating Film Formation in Tribological Contacts

    Pape, F., 18 Mar 2024, In: Coatings. 14, 3, 17 p., 360.

    Research output: Contribution to journal › Article › Research › peer review

  28. Published

    Eignung von additiven Fertigungsverfahren für die Herstellung dynamischer Dichtungen

    Ebel, T. P., 1 Mar 2024, Hannover. 118 p.

    Research output: Thesis › Doctoral thesis

  29. Published

    Evaluating the Tribological Behaviour in Cutting Operations Using a Modified Ball-on-Disc Open Tribotester

    Nassef, B. G., Pape, F., Poll, G., Schenzel, J., Bergmann, B. & Denkena, B., 28 Feb 2024, In: Lubricants. 12, 3, 17 p., 77.

    Research output: Contribution to journal › Article › Research › peer review

  30. Published

    Starvation in oscillating rolling element bearings

    Wandel, S., 20 Feb 2024, Hannover. 185 p.

    Research output: Thesis › Doctoral thesis

  31. Published

    限量供油条件下微柱阵列束油表面润滑增效特性研究

    Sun, J., Liu, C., Guo, F., Poll, G., Bai, L. & Li, X., Feb 2024, In: Mocaxue Xuebao/Tribology. 44, 2, p. 117-128 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  32. Published

    Fatigue life analysis of deep rolled bearing inner rings

    Breidenstein, B., Poll, G., Pape, F., Bergmann, B., Dechant, S. & Nordmeyer, H., 2024, In: Procedia CIRP. 123, p. 13-17 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  33. Published

    Fundamental and Practical Aspects of Tribology

    Berman, D., Rosenkranz, A. & Marian, M., 2024, 302 p.

    Research output: Book/Report › Monograph › Research › peer review

  34. Published

    Manufacturing and Evaluation of Multimaterial Cylindrical Rolling Bearings by Plasma-Transferred Arc Welding

    Faqiri, Y., Saure, F., Coors, T., Pape, F., Hassel, T. & Poll, G., 2024, Bearing and Transmission Steels Technology: ASTM Selected Technical Papers. Beswick, J. (ed.). ASTM International, p. 201-226 26 p. (ASTM Special Technical Publication; vol. STP 1649).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  35. Published

    Schlupf- und Anschmieruntersuchungen zu vollrolligen, kleinen Zylinderrollenlagern unter radial exzentrischer und axialer Belastung

    Stuhler, P., 2024, Hannover. 125 p.

    Research output: Thesis › Doctoral thesis

  36. Published

    离心力作用下轴承滚道润滑剂流失与定量补油数值模拟

    Gao, J., Yang, P., Li, X., Gao, Z., Guo, F. & Poll, G., 2024, In: Mocaxue Xuebao/Tribology. 44, 9, p. 1184-1191 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  37. 2023

  38. Published

    Enhancement of Lubricant Replenishment Under Limited Lubricant Supply in Rolling Bearings

    Liu, C., Guo, F., Li, X., Wong, P., Poll, G. & Liu, M., 7 Dec 2023, In: Tribology letters. 72, 6.

    Research output: Contribution to journal › Article › Research › peer review

  39. Published

    Process strategies for milling of dimples on tapered roller bearings

    Denkena, B., Bergmann, B., Keitel, M., Wege, C., Poll, G., Kelley, J. & Pape, F., Dec 2023, In: Production Engineering. 17, 6, p. 893–905 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. Published

    Enhancing the Performance of Rapeseed Oil Lubricant for Machinery Component Applications through Hybrid Blends of Nanoadditives

    Nassef, B. G., Pape, F. & Poll, G., 6 Nov 2023, In: Lubricants. 11, 11, 479.

    Research output: Contribution to journal › Article › Research › peer review

  41. Published

    Oscillating rolling element bearings: A review of tribotesting and analysis approaches

    de la Presilla, R., Wandel, S., Stammler, M., Grebe, M., Poll, G. & Glavatskih, S., Oct 2023, In: Tribology international. 188, 108805.

    Research output: Contribution to journal › Review article › Research › peer review

  42. Published

    硬脂酸吸附对轴承限量供油润滑影响*

    Saisheng, F., Feng, G., Zhaogang, J., Xinming, L., Haichao, L. & Poll, G., 27 Sept 2023, In: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering. 59, 15, p. 197-203 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  43. Published

    Direct Sensor Integration on the Raceway of Roller Bearings

    Pape, F., Konopka, D., Coors, T., Poll, G., Steppeler, T., Ottermann, R., Dencker, F. & Wurz, M., Sept 2023, 9 p.

    Research output: Book/Report › Conference proceeding › Research

  44. Published

    Fatigue life prediction of rolling bearings based on damage accumulation considering residual stresses

    Hwang, J. I. & Poll, G., Sept 2023, In: Tribologie und Schmierungstechnik. 70, 4-5, p. 32-39 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  45. Published

    Investigation on the Influence of Residual Stresses due to Cold Forming on Stainless Steel Bearings

    Bodewig, A., Pape, F. & Poll, G., Sept 2023.

    Research output: Contribution to conference › Slides to presentation › Research

  46. Published

    Influence of shielding gas coverage during laser hot-wire cladding with high carbon steel

    Budde, L., Biester, K., Coors, T., Faqiri, M. Y., Lammers, M., Hermsdorf, J., Hassel, T., Pape, F. & Overmeyer, L., Aug 2023, In: International Journal of Advanced Manufacturing Technology. 127, 7-8, p. 3195-3207 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  47. Published

    Wear of Tailored Forming Steels

    Coors, T., Faqiri, Y., Saure, F., Pape, F., Hassel, T. & Poll, G., 4 Jul 2023, In: Advanced engineering materials. 25, 13, 2201740.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    Investigation of the Hardness Development of Molybdenum Coatings under Thermal and Tribological Loading

    Behrens, B., Stockburger, E., Wester, H., Poll, G., Pape, F., Konopka, D. & Heimes, N., 30 Jun 2023, In: Lubricants. 11, 7, 14 p., 283.

    Research output: Contribution to journal › Article › Research › peer review

  49. Published

    Tribological Effects of Metalworking Fluids in Cutting Processes

    Pape, F., Poll, G., Ellersiek, L., Denkena, B. & Liu, H., 16 May 2023, In: Lubricants. 11, 5, 224.

    Research output: Contribution to journal › Article › Research › peer review

  50. Published

    Experimental Investigations on Wear in Oscillating Grease-Lubricated Rolling Element Bearings of Different Size and Type

    Bayer, G., Bartschat, A., Wandel, S., Baust, S. & Poll, G., 8 Mar 2023, In: Lubricants. 11, 3, 120.

    Research output: Contribution to journal › Article › Research › peer review

  51. Published

    Wear Development in Oscillating Rolling Element Bearings

    Wandel, S., Bartschat, A., Glodowski, J., Bader, N. & Poll, G., 7 Mar 2023, In: Lubricants. 11, 3, 117.

    Research output: Contribution to journal › Article › Research › peer review

  52. Published

    On the Elastohydrodynamic Film-Forming Properties of Metalworking Fluids and Oil-in-Water Emulsions

    Liu, H. C., Pape, F., Zhao, Y., Ellersiek, L., Denkena, B. & Poll, G., Feb 2023, In: Tribology letters. 71, 1, 13 p., 10.

    Research output: Contribution to journal › Article › Research › peer review

  53. Published

    Reply to the discussion by Philippon, Martinie, Vergne on “Scale and contact geometry effects in thermal EHL: Twin-disc versus ball-on-disc” by Liu, Zhang, Bader, Venner and Poll in Tribology International

    Liu, H. C. & Poll, G., Feb 2023, In: Tribology international. 180, 108204.

    Research output: Contribution to journal › Article › Research › peer review

  54. Published

    Advancements in monitoring of tribological stress in bearings using thin-film strain gauges

    Konopka, D., Steppeler, T., Ottermann, R., Pape, F., Dencker, F., Poll, G. & Wurz, M., 2023, p. 1623-1634.

    Research output: Contribution to conference › Paper › Research › peer review

  55. Published

    Dichtheit von Radial-Wellendichtringen auf Gegenlaufflächen mit mesoskopischen Strukturen

    Matus, M. P., 2023, Hannover. 177 p.

    Research output: Thesis › Doctoral thesis

  56. Published

    Einfluss hoher Lasten auf das Ermüdungslebensdauerverhalten von Wälzlagern

    Dechant, S., Poll, G., Rüth, L., Foko, F. F. & Koch, O., 2023, VDI Berichte. 2415 ed. p. 279-300 22 p. (VDI Berichte; vol. 2023, no. 2415).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  57. Published

    Experimental investigation and finite element implementation of thermo-chemo-mechanical model in technical elastomers

    Fulari, G. S., 2023, Hannover.

    Research output: Thesis › Doctoral thesis

  58. Published

    Simulation of local contact conditions in the secondary shear zone in dry and wet metal cutting

    Denkena, B., Liu, H. C., Pape, F., Bergmann, B., Poll, G., Schenzel, J. & Ellersiek, L., 2023, In: Procedia CIRP. 117, p. 293-298 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  59. 2022

  60. Published

    Contact Analysis of Wind Turbine Blade Bearings by Means of Finite Element Method and Alternative Slicing Technique

    Buescher, M., Schneider, V., Schelenz, R., Jacobs, G. & Poll, G., Dec 2022, Bearing World Journal. Vol. 7. (Bearing World Journal).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  61. Published

    Investigations on the Specifics of Laser Power Modulation in Laser Beam Welding of Round Bars

    Grajczak, J., Nowroth, C., Coors, T., Twiefel, J., Wallaschek, J., Saure, F., Pape, F., Poll, G., Nothdurft, S., Hermsdorf, J. & Kaierle, S., Dec 2022, In: Lasers in Manufacturing and Materials Processing. 9, 4, p. 469-480 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  62. Published

    Investigations on Additively Manufactured Stainless Bearings

    Coors, T., Faqiri, M. Y., Saure, F., Kahra, C., Büdenbender, C., Peddinghaus, J., Prasanthan, V., Pape, F., Hassel, T., Herbst, S., Nürnberger, F., Wester, H., Uhe, J., Breidenstein, B., Denkena, B., Behrens, B. A., Poll, G. & Maier, H. J., 8 Nov 2022, In: COATINGS. 12, 11, 1699.

    Research output: Contribution to journal › Article › Research › peer review

  63. Published

    Application of Hertzian theory to torus on plane contacts

    Kelley, J., Babaalihaghighi, K., Bader, N., Wege, C., Pape, F. & Poll, G., Nov 2022, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 236, 11, p. 2189-2208 20 p.

    Research output: Contribution to journal › Article › Research › peer review

  64. Published

    Investigation of the possible applications for microtextured rolling bearings

    Kelley, J., Poll, G. & Pape, F., 20 Oct 2022, In: Frontiers in Manufacturing Technology. 2, 1012343.

    Research output: Contribution to journal › Article › Research › peer review

  65. Published

    Modelling the impact of structural flexibility of wheelsets and rails on the wheel-rail contact and the wear

    Kaiser, I., Poll, G. & Vinolas, J., 15 Sept 2022, In: Wear. 504-505, 203445.

    Research output: Contribution to journal › Article › Research › peer review

  66. Published

    Electrical Bearing Damage: A Problem in the Nano- and Macro-Range

    Schneider, V., Behrendt, C., Höltje, P., Cornel, D., Becker-Dombrowsky, F. M., Puchtler, S., Guzmán, F. G., Ponick, B., Jacobs, G. & Kirchner, E., 21 Aug 2022, In: Lubricants. 10, 8, 194.

    Research output: Contribution to journal › Article › Research › peer review

  67. Published

    Nano- and Micro-Tribological Investigations of Boundary Layers on Axial Bearing Washers Tested under WEC Critical Conditions

    Pape, F., Aug 2022, In: Lubricants. 10, 8, 26 p., 198.

    Research output: Contribution to journal › Article › Research › peer review

  68. Published

    Investigations on the residual stress state of stainless steel angular contact ball bearings pre conditioned by cold forming

    Bodewig, A., Pape, F. & Poll, G., 15 Jul 2022.

    Research output: Contribution to conference › Slides to presentation › Research

  69. Published

    Method for In Situ Film Thickness Measurement of Ball Bearings under Combined Loading using Capacitance Measurements

    Schneider, V., Bader, N. F., Liu, H. & Poll, G., Jul 2022, In: Tribology international. 171, 107524.

    Research output: Contribution to journal › Article › Research › peer review

  70. Published

    Functionality Investigations of Dry-Lubricated Molybdenum Trioxide Cylindrical Roller Thrust Bearings

    Konopka, D., Pape, F., Heimes, N., Behrens, B., Möhwald, K. & Poll, G., 26 Apr 2022, In: COATINGS. 12, 5, 591.

    Research output: Contribution to journal › Article › Research › peer review

  71. Published

    Wear in wind turbine pitch bearings—A comparative design study

    Schwack, F., Halmos, F., Stammler, M., Poll, G. & Glavatskih, S., 28 Mar 2022, In: WIND ENERGY. 25, 4, p. 700-718 19 p.

    Research output: Contribution to journal › Article › Research › peer review

  72. Published

    Application of stainless steel bearings with pre-induced residual stresses

    Bodewig, A., Pape, F. & Poll, G., Mar 2022, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Starvation and Relubrication Mechanisms in Grease Lubricated Oscillating Bearings

    Wandel, S., Bader, N. F., Schwack, F., Glodowski, J., Lehnhardt, B. & Poll, G., Jan 2022, In: Tribology international. 165, 107276.

    Research output: Contribution to journal › Article › Research › peer review

  74. Published

    Analyse zum Dichtverhalten von rotierenden Radial-Wellendichtringen

    Pelzer, V., 2022, Hannover. 89 p.

    Research output: Thesis › Doctoral thesis

  75. Published

    Influence of Metal Working Fluids in Cutting Processes

    Pape, F., Liu, H., Ellersiek, L., Kroedel, A., Denkena, B. & Poll, G., 2022, In: Defect and Diffusion Forum (Online). 414, p. 51-57 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  76. Published

    Lebensdauer-Vorhersage für Elastomerbauteile mit variabler Vorspannung und Temperaturabhängigkeit

    El Maanaoui, H., 2022, Hannover. 148 p.

    Research output: Thesis › Doctoral thesis

  77. Published

    Mechanische Hochfrequenzeigenschaften von Elastomeren aus signalverarbeitungsoptimierter Ultraschallspektroskopie

    Maslak, A. M., 2022, Hannover. 155 p.

    Research output: Thesis › Doctoral thesis

  78. Published

    Speed4E: Effizienter Automobiler Antriebsstrang

    Poll, G. & Brieke, T., 2022, In: Konstruktion. 74, 10, p. 68-69 2 p.

    Research output: Contribution to journal › Comment/debate › Research › peer review

  79. Published

    Starvation and Re-lubrication in Oscillating Bearings: Influence of Grease Parameters

    Wandel, S., Bader, N. F., Glodowski, J., Lehnhardt, B. J., Leckner, J., Schwack, F. & Poll, G., 2022, In: Tribology Letters. 70, 4, 114.

    Research output: Contribution to journal › Article › Research › peer review

  80. Published

    Stromdurchgang am Wälzlager

    Schneider, V. & Stockbrügger, J. O., 2022, FVA Forschungsheft. Vol. 1501.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  81. Published

    Untersuchungen zum Einfluss strukturierter Dichtkontaktflächen auf das Betriebsverhalten von Drehdurchführungen mit Rechteckdichtringen

    Schüller, P. M., 2022, Hannover. 178 p.

    Research output: Thesis › Doctoral thesis

  82. 2021

  83. Published

    Two-dimensional generalized non-Newtonian EHL lubrication: Shear rate-based solution versus shear stress-based solution

    Liu, H., Zhang, B. B., Schneider, V., Venner, C. H. & Poll, G., 1 Dec 2021, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 235, 12, p. 2626-2639 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  84. Published

    Auswirkung stochastischer Strukturen in Gegenlaufflächen auf die Funktion von Radialwellendichtringen

    Poll, G. & Matus, M. P., 24 Nov 2021, Forschungsheft 1463 der Forschungsvereinigung Antriebstechnik e.V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  85. Published

    Influence of process-related heat accumulation of laser beam welded 1.7035 round bars on weld pool shape and weld defects

    Grajczak, J., Nowroth, C., Coors, T., Twiefel, J., Wallaschek, J., Saure, F., Pape, F., Poll, G., Nothdurft, S., Hermsdorf, J., Wesling, V. & Kaierle, S., Nov 2021, In: Journal of laser applications. 33, 4, 042007.

    Research output: Contribution to journal › Article › Research › peer review

  86. Published

    On the critical amplitude in oscillating rolling element bearings

    Schwack, F., Schneider, V., Wandel, S., de la Presilla, R. J. & Glavatskih, S., Nov 2021, In: Tribology International. 163, 107154.

    Research output: Contribution to journal › Article › Research › peer review

  87. Published

    Validation of a solvent-based process for the smoothing of additively manufactured 3D models of nasal cavities

    Meile, V., Tymkovych, M., Rusiecki, T., Nosova, Y., Pape, F., Poll, G., Glasmacher, B., Avrunin, O. & Gryshkov, O., 9 Oct 2021, In: Current Directions in Biomedical Engineering. 7, 2, p. 423-426 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  88. Published

    Cavitation and film formation in hydrodynamically lubricated parallel sliders

    Bulut, D., Bader, N. F. & Poll, G., Oct 2021, In: Tribology international. 162, 107113.

    Research output: Contribution to journal › Article › Research › peer review

  89. Published

    Characterization and Modeling of Nano Wear for Molybdenum-Based Lubrication Layer Systems

    Behrens, B. A., Poll, G., Möhwald, K., Schöler, S., Pape, F., Konopka, D., Brunotte, K., Wester, H., Richter, S. & Heimes, N., 21 May 2021, In: Nanomaterials. 11, 6, 1363.

    Research output: Contribution to journal › Article › Research › peer review

  90. Published

    Influence of degree of deformation on welding pore reduction in high-carbon steels

    Behrens, B. A., Maier, H. J., Poll, G., Overmeyer, L., Wester, H., Uhe, J., Hassel, T., Pape, F., Lammers, M., Hermsdorf, J., Kaierle, S., Budde, L., Saure, F., Mildebrath, M., Coors, T., Faqiri, M. Y. & Büdenbender, C., Apr 2021, In: Production Engineering. 15, 2, p. 161-168 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  91. Published

    Empirical formulae for the influence of real film thickness distribution on the capacitance of an EHL point contact and application to rolling bearings

    Schneider, V., Liu, H., Bader, N., Furtmann, A. & Poll, G., Feb 2021, In: Tribology International. 154, 106714.

    Research output: Contribution to journal › Article › Research › peer review

  92. Published

    Grease film evolution in rolling elastohydrodynamic lubrication contacts

    Li, X., Guo, F., Poll, G., Fei, Y. & Yang, P., Feb 2021, In: Friction. 9, 1, p. 179-190 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  93. Published

    Scale and contact geometry effects on friction in thermal EHL: twin-disc versus ball-on-disc

    Liu, H., Zhang, B., Bader, N., Venner, C. H. & Poll, G., Feb 2021, In: Tribology International. 154, 106694.

    Research output: Contribution to journal › Article › Research › peer review

  94. Published

    Cavitation and film formation in hydrodynamically lubricated parallel sliding contacts

    Bulut, D., 2021, Hannover. 111 p.

    Research output: Thesis › Doctoral thesis

  95. Published

    Investigation of Contact Mechanics and Friction of Rubber Compounds by Experimental Techniques and Numerical Simulations

    Cugliari, J., 2021, Hannover. 226 p.

    Research output: Thesis › Doctoral thesis

  96. Published

    Investigation of the Scaling of Friction Coefficients from the Nano to the Micro Level for Base Materials and Coatings

    Heimes, N., Pape, F., Konopka, D., Schöler, S., Möhwald, K., Poll, G. & Behrens, B. A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 161-170 10 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  97. Published

    Molybdenum Based Coatings on 100Cr6 Bearing Steel Surfaces

    Schöler, S., Heimes, N., Konopka, D., Behrens, B., Poll, G. & Möhwald, K., 2021, Tagungsband 4. Niedersächsisches Symposium Materialtechnik. 6 p. (Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of materials research and engineering; vol. 10).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  98. 2020

  99. Published

    Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushing

    Behrens, B. A., Maier, H. J., Poll, G., Wriggers, P., Aldakheel, F., Klose, C., Nürnberger, F., Pape, F., Böhm, C., Chugreeva, A., Coors, T., Duran, D., Thürer, S. E., Herbst, S., Hwang, J. I., Matthias, T., Heimes, N. & Uhe, J., Dec 2020, In: Production Engineering. 14, 5-6, p. 569-581 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  100. Published

    ToF-SIMS analysis of boundary layers formed under zinc-free antiwear

    Mallach, D., Pape, F., Lipinsky, D. & Arlinghaus, H. F., 16 Oct 2020, In: Industrial Lubrication and Tribology. 72, 8, p. 1013-1017 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  101. Published

    Investigations on tailored forming of aisi 52100 as rolling bearing raceway

    Coors, T., Mildebrath, M., Büdenbender, C., Saure, F., Faqiri, M. Y., Kahra, C., Prasanthan, V., Chugreeva, A., Matthias, T., Budde, L., Pape, F., Nürnberger, F., Hassel, T., Hermsdorf, J., Overmeyer, L., Breidenstein, B., Denkena, B., Behrens, B. A., Maier, H. J. & Poll, G., 13 Oct 2020, In: Metals. 10, 10, p. 1-19 19 p., 1363.

    Research output: Contribution to journal › Article › Research › peer review

  102. Published

    Production-related surface and subsurface properties and fatigue life of hybrid roller bearing components

    Breidenstein, B., Denkena, B., Krödel, A., Prasanthan, V., Poll, G., Pape, F. & Coors, T., 7 Oct 2020, In: Metals. 10, 10, p. 1-17 17 p., 1339.

    Research output: Contribution to journal › Article › Research › peer review

  103. Published

    Numerical simulation and experimental validation of the cladding material distribution of hybrid semi-finished products produced by deposition welding and cross-wedge rolling

    Kruse, J., Mildebrath, M., Budde, L., Coors, T., Faqiri, M. Y., Barroi, A., Stonis, M., Hassel, T., Pape, F., Lammers, M., Hermsdorf, J., Kaierle, S., Overmeyer, L. & Poll, G., 6 Oct 2020, In: Metals. 10, 10, p. 1-23 23 p., 1336.

    Research output: Contribution to journal › Article › Research › peer review

  104. Published

    A study of grease lubricants under wind turbine pitch bearing conditions

    Schwack, F., Bader, N., Leckner, J., Demaille, C. & Poll, G., 15 Aug 2020, In: Wear. 454-455, 203335.

    Research output: Contribution to journal › Article › Research › peer review

  105. Published

    Manufacturing of Large-Diameter Rolling Element Bearings by Steel-Steel Multimaterial Systems

    Coors, T., Mildebrath, M., Pape, F., Hassel, T., Maier, H. J. & Poll, G., 1 Aug 2020, Bearing Steel Technologies: 12th Volume, Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Beswick, J. M. (ed.). ASTM International, p. 277-299 23 p. (ASTM Special Technical Publication; vol. STP 1623).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  106. Published

    Ultrasonic Evaluation of Tailored Forming Components

    Pape, F., Coors, T., Matthias, T., Behrens, B. & Poll, G., 1 Aug 2020, Bearing Steel Technologies: 12th Volume, Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Beswick, J. M. (ed.). ASTM International, p. 300-312 13 p. STP162320190068. (ASTM Special Technical Publication; vol. STP 1623).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  107. Published

    Simplified traction prediction for highly loaded rolling/sliding EHL contacts

    Liu, H., Zhang, B., Bader, N., Venner, C. H. & Poll, G., Aug 2020, In: Tribology International. 148, 106335.

    Research output: Contribution to journal › Article › Research › peer review

  108. Published

    Erkennen und Bewerten von schädlichen Strukturen auf RWDR-Gegenlaufflächen

    Bauer, F., Poll, G., Schiefer, F. & Matus, M. P., 31 Jul 2020, Forschungsheft 1386 der Forschungsvereinigung Antriebstechnik e.V..

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  109. Published

    Studies on the Influence of Residual Stresses on the Fatigue Life of Rolling Bearings in Dependence on the Production Processes

    Pape, F., Coors, T. & Poll, G., 29 Jul 2020, In: Frontiers in Mechanical Engineering. 6, 56.

    Research output: Contribution to journal › Article › Research › peer review

  110. Published

    Characterization of molybdenum based coatings on 100Cr6 bearing steel surfaces

    Schöler, S., Schmieding, M., Heimes, N., Pape, F., Behrens, B., Poll, G. & Möhwald, K., 30 Jun 2020, In: Tribology Online. 15, 3, p. 181-185 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  111. Published

    Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored properties

    Coors, T., Pape, F., Kruse, J., Blohm, T., Beermann, R., Quentin, L., Herbst, S., Langner, J., Stonis, M., Kästner, M., Reithmeier, E., Nürnberger, F. & Poll, G., 9 Jun 2020, In: International Journal of Advanced Manufacturing Technology. 108, 7-8, p. 2409-2417 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  112. Published

    Influences of solid and lubricant thermal conductivity on traction in an EHL circular contact

    Liu, H., Zhang, B., Bader, N., Poll, G. & Venner, C. H., Jun 2020, In: Tribology International. 146, 106059.

    Research output: Contribution to journal › Article › Research › peer review

  113. Published

    Herstellung von Großwälzlagern durch Stahl-Stahl-Werkstoffsysteme: Conference: 23. Umformtechnisches Kolloquium Hannover

    Coors, T., Saure, F., Mildebrath, M., Pape, F., Hassel, T. & Poll, G., 5 Mar 2020, 143 p.

    Research output: Book/Report › Conference proceeding › Research

  114. Published

    Untersuchungen zur Festigkeit von komplex beanspruchten Multimaterialsystemen am Beispiel von Wälzkontaktermüdung

    Coors, T., Pape, F. & Poll, G., 5 Mar 2020, 23. Umformtechnisches Kolloquium Hannover . p. 134

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  115. Published

    Energy-based modelling of adhesive wear in the mixed lubrication regime

    Terwey, J. T., Fourati, M. A., Pape, F. & Poll, G., 6 Feb 2020, In: Lubricants. 8, 2, 16.

    Research output: Contribution to journal › Article › Research › peer review

  116. Published

    Effect of load reduction mechanisms on loads and blade bearing movements of wind turbines

    Stammler, M., Thomas, P., Reuter, A., Schwack, F. & Poll, G., 17 Jan 2020, In: Wind Energy. 23, 2, p. 274-290 17 p.

    Research output: Contribution to journal › Article › Research › peer review

  117. Published

    Concept for enhancing machine elements by residual stresses and tailored forming

    Coors, T., Pape, F. & Poll, G., 2020, Proceedings - 26th International Association for Management of Technology Conference, IAMOT 2017. p. 1792-1802 11 p. (26th International Association for Management of Technology Conference, IAMOT 2017).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  118. Published

    Determination of the flow behavior of the joining zones of hybrid semi-finished products by means of nanoindentation. Düsseldorf, Germany, Nanobruecken 2020, Nanomechanical Testing Conference & Bruker Hysitron User Meeting

    Matthias, T., Heimes, N., Pape, F. & Behrens, B., 2020

    Research output: Book/Report › Conference proceeding › Research

  119. Published

    Experimentelle Untersuchungen zur Schmierstoff-Oberfächen-Wechselwirkung in nasslaufenden Reibsystemen am Beispiel von Synchronisierungen

    Skubacz, T., 2020, Hannover. 189 p.

    Research output: Thesis › Doctoral thesis

  120. Published

    Investigation of Traction Experiment Set Up on the Resulting Traction Curves and Fluid Properties Derived from such Measurements

    Bader, N. F. & Poll, G., 2020, 61. Tribologie Fachtagung 2020, 61. Tribologie-Fachtagung 2020 Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendungen, Gesellschaft für Tribologie e.V.

    Research output: Chapter in book/report/conference proceeding › Entry in reference work › Research

  121. Published

    Näherungslösungen für Reibung und Verschleiß in ölgeschmierten Wälzkontakten unter Berücksichtigung der realen Rheologie

    Terwey, J. T., 2020, Hannover.

    Research output: Thesis › Doctoral thesis

  122. Published

    Traction prediction in rolling/sliding EHL contacts with reference fluids

    Liu, H., 2020, Hannover. 157 p.

    Research output: Thesis › Doctoral thesis

  123. Published

    Untersuchungen zum Betriebsverhalten oszillierender Wälzlager am Beispiel von Rotorblattlagern in Windenergieanlagen

    Schwack, F., 2020, Hannover. 200 p.

    Research output: Thesis › Doctoral thesis

  124. 2019

  125. Published

    Investigations on Graphene Platelets as Dry Lubricant and as Grease Additive for Sliding Contacts and Rolling Bearing Application

    Pape, F. & Poll, G., 19 Dec 2019, In: Lubricants. 8, 1, 3.

    Research output: Contribution to journal › Article › Research › peer review

  126. Published

    Simulation of a steel-aluminum composite material subjected to rolling contact fatigue

    Hwang, J. I., Coors, T., Pape, F. & Poll, G., 6 Dec 2019, In: Lubricants. 7, 12, 109.

    Research output: Contribution to journal › Article › Research › peer review

  127. Published

    Characterisation of Self-Regenerative Dry Lubricated Layers on Mo-Basis by Nano Mechanical Testing

    Mohnfeld, N., Pape, F., Poll, G., Konopka, D., Schöler, S., Möhwald, K. & Behrens, B., 24 Nov 2019, Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Wulfsberg, J. P., Hintze, W. & Behrens, B.-A. (eds.). 1. ed. Berlin, Heidelberg: Springer Vieweg, p. 139-148

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  128. Published

    Computational investigation of crack inducing forces on bearing surfaces regarding the tribofilm structure

    Pape, F., Petzold, M. & Poll, G., 1 Oct 2019, In: International Journal of Computational Methods and Experimental Measurements. 7, 4, p. 340-349 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  129. Published

    Lubricant compatibility of FKM seals in synthetic oils

    Bulut, D., Krups, T., Poll, G. & Giese, U., 22 Jul 2019, In: Industrial Lubrication and Tribology. 72, 5, p. 557-565 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  130. Published

    Theoretical investigations on the fatigue behavior of a tailored forming steel-aluminium bearing component

    Coors, T., Hwang, J. I., Pape, F. & Poll, G., 2 Jul 2019, Proceedings of the 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. 040020. (AIP Conference Proceedings; vol. 2113).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  131. Published

    Enhancement of roller bearing fatigue life by innovative production processes

    Pape, F., Maiss, O., Denkena, B. & Poll, G., 3 Apr 2019, In: Industrial Lubrication and Tribology. 71, 8, p. 1003-1006 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  132. Published

    The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

    Kaiser, I., Poll, G., Voss, G. & Vinolas, J., 3 Apr 2019, In: Vehicle System Dynamics. 57, 4, p. 564-594 31 p.

    Research output: Contribution to journal › Article › Research › peer review

  133. Published

    Crucial role of solid body temperature on elastohydrodynamic film thickness and traction

    Liu, H. C., Zhang, B. B., Bader, N., Guo, F., Poll, G. & Yang, P., Mar 2019, In: Tribology International. 131, p. 386-397 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  134. Published

    Manufacturing and Evaluation of Multi-Material Axial-Bearing Washers by Tailored Forming

    Behrens, B. A., Chugreev, A., Matthias, T., Poll, G., Pape, F., Coors, T., Hassel, T., Maier, H. J. & Mildebrath, M., Feb 2019, In: Metals. 9, 2, 232.

    Research output: Contribution to journal › Article › Research › peer review

  135. Published

    Oszillierende Wälzlager in Windenergieanlagen: Abgrenzung der Schadensmechanismen

    Wandel, S., Schwack, F. & Poll, G., Jan 2019, Gleit- und Wälzlagerungen 2019: Gestaltung - Berechnung - Einsatz. Schweinfurt, Vol. 2348. p. 221-232 12 p. (VDI Berichte).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  136. Published

    Micro- and nanotribological characterization of molybdenum oxide based coatings on 100CR6 bearing steel surfaces

    Konopka, D., Pape, F., Heimes, N., Matthias, T., Schöler, S., Möhwald, K., Behrens, B. & Poll, G., 2019, Proceedings of 10th International Scientific Conference BALTTRIB 2019. p. 308-315 8 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  137. Published

    Surface Properties Inside Pitchers of the Tropical Pitcher Plant Nepenthes

    Poll, G., Behrens, B., Matthias, T. & Pape, F., 2019.

    Research output: Contribution to conference › Poster › Research

  138. Published

    Surface Properties of Tailored Forming Thrust Bearings

    Poll, G., Behrens, B., Chugreev, A., Matthias, T., Pape, F. & Coors, T., 2019.

    Research output: Contribution to conference › Poster › Research

  139. Published

    Untersuchungen zur praktischen Umsetzung von Elastomer-Lagersitzen in Hochdrehzahl-Traktionselektromotoren

    Horn, M., 2019, Hannover. 147 p.

    Research output: Thesis › Doctoral thesis

  140. 2018

  141. Published

    Tribological Study on Tailored-Formed Axial Bearing Washers

    Pape, F., Coors, T., Barroi, A., Hermsdorf, J., Mildebrath, M., Hassel, T., Kaierle, S., Matthias, T., Chugreev, A., Chugreeva, A., Behrens, B. A., Overmeyer, L. & Poll, G., 31 Dec 2018, In: Tribology Online. 13, 6, p. 320-326 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  142. Published

    Tribologische Untersuchungen zur Entstehung von White Etching Cracks (WECs)

    Pape, F., Terwey, J. T., Wiesker, S., Averbeck, S., Muhmann, C., Lipinsky, D., Arlinghaus, H. F., Kerscher, E., Sauer, B. & Poll, G., Dec 2018, In: Forschung im Ingenieurwesen. 82, 4, p. 341-352 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  143. Published

    Untersuchung von maßgeschneiderten Umformbauteilen als tribologisch belastete Maschinenelemente

    Pape, F., Coors, T. & Poll, G., Dec 2018, In: Forschung im Ingenieurwesen/Engineering Research. 82, 4, p. 311-318 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  144. Published

    Influence of contact geometry and thermal behavior on traction

    Bader, N. F., Brieke, T., Terwey, J. T., Liu, H. & Poll, G., Nov 2018.

    Research output: Contribution to conference › Poster › Research

  145. Published

    On the Crucial Role of Solid Body Temperature in EHL Traction

    Liu, H., Zhang, B., Bader, N. F., Guo, F., Yang, P. & Poll, G., Nov 2018, Tagungsband 14. Arnold Tross Kolloquium.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  146. Published

    Finite element simulation and experimental analysis of false brinelling and fretting corrosion

    Schwack, F., Prigge, F. & Poll, G., Oct 2018, In: Tribology International. 126, p. 352-362 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  147. Published

    Tribological Improvement of Angular Contact Ball Bearings Operated under Small Pivoting Angles by Surface Texturing

    Pape, F. & Poll, G., Oct 2018.

    Research output: Contribution to conference › Paper › Research

  148. Published

    Application of tailored forming components as tribologically loaded machine elements

    Poll, G., Pape, F. & Coors, T., Sept 2018, Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendung: Tagungsband 1. p. 39.1-39.5

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  149. Published

    Efficient Calculation of EHL Traction Using Simplified Approaches and Test Results

    Terwey, J. T., Bader, N. F., Liu, H. & Poll, G., Sept 2018, Reibung, Schmierung und Verschleiß, Forschung und praktische Anwendung: Tagungsband 1. p. 10.1-10.5

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  150. Published

    Investigation into the influence of temperature and contact geometry on traction

    Liu, H., Bader, N. F., Brieke, T., Terwey, J. T. & Poll, G., Sept 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  151. Published

    Investigations of boundary layers generated in a micro pin-on-disk tester

    Pape, F., Poll, G., Lipinsky, D., Arlinghaus, H. F. & Mallach, D., Sept 2018.

    Research output: Contribution to conference › Paper › Research

  152. Published

    Tribological Models of Fluids

    Poll, G., Terwey, J. T., Schwarze, H., Brouwer, L., Neupert, T. & Bartel, D., Sept 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  153. Published

    Fatigue life calculation of load-adapted hybrid angular contact ball bearings

    Pape, F., Coors, T., Wang, Y. & Poll, G., 15 Jul 2018, Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018. Abdel Wahab, M. (ed.). Pleiades Publishing, p. 401-414 14 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  154. Published

    Numerical calculation of local adhesive wear in machine elements under boundary lubrication considering the surface roughness

    Terwey, J. T., Berninger, S., Burghardt, G., Jacobs, G. & Poll, G., 15 Jul 2018, Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018. Pleiades Publishing, p. 796-807 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  155. Published

    Load distribution in a roller-type rotor blade bearing

    Stammler, M., Baust, S., Reuter, A. & Poll, G., 19 Jun 2018, In: Journal of Physics: Conference Series. 1037, 4, 042016.

    Research output: Contribution to journal › Conference article › Research › peer review

  156. Published

    Cycle counting of roller bearing oscillations: case study of wind turbine individual pitching system

    Stammler, M., Reuter, A. & Poll, G., Jun 2018, In: Renewable Energy Focus. 25, p. 40-47 8 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  157. Published

    Graphenbasierte Schmierung von Wälzlagern

    Pape, F., Poll, G., Knigge, S. R. & Glasmacher, B., Jun 2018, In: Tribologie und Schmierungstechnik. 66, 3, p. 26-31 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  158. Published

    ZDDP containing tribofilms generated under sliding micro contact and bearing test rig conditions

    Pape, F., Muhmann, C., Pahl, D., Lipinsky, D., Arlinghaus, H. F. & Poll, G., 24 May 2018, In: Materials Performance and Characterization. 7, 3, 191 p.

    Research output: Contribution to journal › Article › Research › peer review

  159. Published

    Efficient Calculation of Fluid Traction Curves Using Simplified Approaches and Test Results

    Terwey, J. T., Bader, N. F., Liu, H. & Poll, G., May 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  160. Published

    Lebensdaueruntersuchungen und Oberflächenanalytik zur Charakterisierung tribologischer Systeme

    Poll, G. & Pape, F., Apr 2018.

    Research output: Contribution to conference › Slides to presentation › Research

  161. Published

    Sonderforschungsbereich 1153, Wälzfestigkeit

    Poll, G., Coors, T. & Pape, F., Apr 2018.

    Research output: Contribution to conference › Poster › Research

  162. Published

    Friction torque of wind-turbine pitch bearings – comparison of experimental results with available models

    Stammler, M., Schwack, F., Bader, N., Reuter, A. & Poll, G., 14 Mar 2018, In: Wind Energy Science. 3, 1, p. 97-105 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  163. Published

    Investigations on the frictional behavior of soft and hard contact lenses by nanoscratch studies

    Poll, G., Pape, F., Matthias, T. & Behrens, B., Feb 2018.

    Research output: Contribution to conference › Poster › Research

  164. Published

    Analyse der Bauteilbewegungen und Verschleißuntersuchungen an Synchronisierungen im nicht geschalteten Zustand

    Poll, G. & Niemeier, M. A., 2018, Forschungsheft 1312 der Forschungsvereinigung Antriebstechnik e. V.. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Contribution to project report/research report › Research

  165. Published

    Beanspruchung von Kupplungskörpern

    Pfeifer, B., 2018, Hannover. 115 p.

    Research output: Thesis › Doctoral thesis

  166. Published

    Capacitance Measurement of Film Thickness in EHL contacts

    Bader, N. F., Liu, H., Furtmann, A., Zhang, B. & Poll, G., 2018, Proceedings. p. 77-78

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  167. Published

    Computational approach to improve bearings by residual stresses based on their required bearing fatigue life

    Pape, F., Maiss, O., Denkena, B. & Poll, G., 2018, In: International Journal of Computational Methods and Experimental Measurements. 6, 4, p. 656-666 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  168. Published

    Enhancing Machine Elements by Residual Stresses, Optimized Surfaces and Tailored Forming

    Poll, G., Coors, T. & Pape, F., 2018, Proceedings. p. 277-278

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Previous 1 2 3 Next