Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Production Engineering and Machine Tools

Organisational unit: Institute

Type of address: Visitor addres
An der Universität 2
30823
Garbsen
641 - 800 out of 1,447Page size: 160
Order:

Publications

  1. 2018

  2. Published

    Grinding of riblets with "beaver tooth" multi-layer tools

    Hockauf, R., Asadi, E., Denkena, B., Grove, T. & Wurz, M., 2018, In: Procedia CIRP. 71, p. 155-159 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  3. Published

    HLProKet - Hochleistungsprozesskette in der Großserienfertigung: Projekt-Abschlussbericht

    Denkena, B. (Editor), Krödel, A., Shanib, M. & Kuhlemann, P., 2018, (Berichte aus dem IFW; vol. 2018,11)

    Research output: Book/Report › Project report/research report › Research

  4. Published

    Hybrider Antrieb für Zerspanroboter

    Schönherr, M., 2018

    Research output: Thesis › Doctoral thesis

  5. Published

    Hybrides Prognosemodell zur Bestimmung von Preisentwicklungen im Werkzeug- und Formenbau

    Nemeti, A., 2018

    Research output: Thesis › Doctoral thesis

  6. Published

    Hybrid Spindle - An approach for a milling machine tool spindle with extended working range for HSC and HPC

    Denkena, B., Bergmann, B., Mücke, M., Königsberg, J. & Ponick, B., 2018, In: Procedia Manufacturing. 24, p. 159-165 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  7. Published

    Improvement of the frictional properties of angular contact ball bearings operating under small pivoting angles by surface texturing

    Poll, G., Pape, F., Maiß, O., Lucas, H. & Denkena, B., 2018, Proceedings.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  8. Published

    Increased performance in high speed turning of Inconel 718 by laser structuring of PcBN tools

    Denkena, B., Grove, T., Krödel, A. & Ellersiek, L., 2018, In: Procedia CIRP. 77, p. 602-605 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  9. Published

    Influence of prepreg material quality on carbon fiber reinforced plastic laminates processed by automated fiber placement

    Schmidt, C., Weber, P., Hocke, T. & Denkena, B., 2018, In: Procedia CIRP. 67, p. 422-427 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  10. Published

    Investigations on a standardized process chain and support structure related rework procedures of SLM manufactured components

    Denkena, B., Dittrich, M., Henning, S. & Lindecke, P., 2018, In: Procedia Manufacturing. 18, p. 50-57 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  11. Published

    IPROM - Innovative Prozesskette zur Massivteilfertigung: Projekt-Abschlussbericht

    Denkena, B. (Editor), 2018, (Berichte aus dem IFW; vol. 2018,6)

    Research output: Book/Report › Project report/research report › Research

  12. Published

    Komplettbearbeitung von Leisten für die individuelle Schuhfertigung

    Brehmeier, S., 2018

    Research output: Thesis › Doctoral thesis

  13. Published

    Kontinuierliches Wälzschleifen mit keramisch gebundenen CBN-Schleifwerkzeugen

    Woiwode, S., 2018

    Research output: Thesis › Doctoral thesis

  14. Published

    Levitating High-Performance Machining

    Denkena, B., Bergmann, B. & Krüger, R., 2018, In: Mikroniek - Professional Journal on Precision Engineering. 2018, 2, p. 29-33

    Research output: Contribution to journal › Article › Research

  15. Published

    Magnetisch gelagerter Kreuztisch

    Denkena, B., Bergmann, B. & Fuchs, J., 2018, In: VDI-Z Integrierte Produktion. 2018, 3, p. 62-65

    Research output: Contribution to journal › Article › Research

  16. Published

    Methode zur digitalen Analyse des Herstellungsaufwandes von Druckgussformen

    Köller, M., 2018

    Research output: Thesis › Doctoral thesis

  17. Published

    Nachweis des aerodynamischen Potentials von durch Schleifen und Laserabtrag hergestellten Riblets in einem hochbelasteten Axialverdichter: Abschlussbericht

    Willeke, T., Seume, J., Harmes, J., Denkena, B., Müller, T., Reithmeier, E., Albrecht, D. & Overmeyer, L., 2018

    Research output: Book/Report › Project report/research report › Research

  18. Published

    Online Compensation of Tool Deflection in Milling Operations by Feeling Machine Tools

    Denkena, B., Bergmann, B. & Boujnah, H., 2018. 4 p.

    Research output: Contribution to conference › Paper › Research

  19. Published

    Online-Prozessüberwachung von Automated Fiber Placement Prozessen auf Basis der Thermografie

    Völtzer, K., 2018

    Research output: Thesis › Doctoral thesis

  20. Published

    Porous metal bonds increase the resource efficiency for profile grinding

    Denkena, B., Grove, T. & Suntharakumaran, V., 2018, In: Procedia CIRP. 69, p. 265-270 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  21. Published

    Process-parallel center deviation measurement of a BTA deep-hole drilling tool

    Denkena, B., Bergmann, B., Kaiser, S., Mücke, M. & Bolle, D., 2018, In: Procedia Manufacturing. 24, p. 229-234 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  22. Published

    Residual stresses in grinding of forming tools with toric grinding pins

    Grove, T., Lucas, H. & Denkena, B., 2018, In: Procedia CIRP. 71, p. 354-357 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  23. Published

    Resource Efficient Regrinding of Cemented Carbide Milling Tools

    Denkena, B., Grove, T., Theuer, M. & Liu, Y., 2018, In: Procedia CIRP. 69, p. 882-887 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  24. Published

    Ressourceneffiziente Zerspanung von Ti-6Al-4V-Strukturbauteilen für Luftfahrtanwendungen

    Helmecke, T. P., 2018

    Research output: Thesis › Doctoral thesis

  25. Published

    Simplified representation of complex structural components for finite-element-analysis

    Reichert, L., Krieglsteiner, J., Schmidt, C. & Horst, P., 2018, ECCM 2018 - 18th European Conference on Composite Materials.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  26. Published

    Steigerung der Ressourceneffizienz bei HSS-Fräsern: Angepasste Mikrogeometrien und Beschichtungen erhöhen Produktivität bei HSS-Werkzeugen

    Erkens, G., Richter, B., Grove, T. & Denkena, B., 2018, In: WT Werkstattstechnik. 108, 1-2, p. 58-64 7 p.

    Research output: Contribution to journal › Article › Research

  27. Published

    Trockenes Seilschleifen von Stahl

    Tatzig, L., 2018

    Research output: Thesis › Doctoral thesis

  28. Published

    Unternehmensspezifische Bewertung von Weiterbildungsstrategien: Potenzial einer simulationsbasierten Methode

    Merwart, M., 2018

    Research output: Thesis › Doctoral thesis

  29. Published

    Verzugsminimierung in der Großteilfertigung mit adaptiven Programmiertechniken

    Kaddour, R., 2018, Garbsen. 147 p.

    Research output: Thesis › Doctoral thesis

  30. 2017

  31. Published

    Effect of PVD film's residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools

    Skordaris, G., Bouzakis, K. D., Kotsanis, T., Charalampous, P., Bouzakis, E., Breidenstein, B., Bergmann, B. & Denkena, B., 21 Dec 2017, In: CIRP Journal of Manufacturing Science and Technology. 18, p. 145-151 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  32. Published

    Design and optimization of a machining robot

    Denkena, B., Bergmann, B. & Lepper, T., 5 Dec 2017, In: Procedia Manufacturing. 14, p. 89-96 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  33. Published

    Design of individual re-contouring processes

    Böß, V., Rust, F., Denkena, B. & Dittrich, M. A., 5 Dec 2017, In: Procedia Manufacturing. 14, p. 76-88 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  34. Published

    Increasing productivity in turning of hard-to-cut materials by means of modified flank faces

    Denkena, B., Bergmann, B., Grove, T. & Pape, O., 5 Dec 2017, In: Procedia Manufacturing. 14, p. 97-104 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  35. Published

    Residual stress formation after re-contouring of micro-plasma welded Ti−6Al−4 V parts by means of ball end milling

    Denkena, B., Grove, T., Mücke, A., Langen, D., Nespor, D. & Hassel, T., 5 Dec 2017, In: Materialwissenschaft und Werkstofftechnik. 48, 11, p. 1034-1039 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  36. Published

    Reibgedämpfter Werkzeughalter

    Denkena, B., Bergmann, B. & Teige, C., Dec 2017, In: Industrial Lubrication and Tribology. 159, 12, p. 60-62 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  37. Published

    Smart and energy-efficient dust suction concept for milling of fibre-reinforced plastics

    Denkena, B., Dittrich, M. A. & Rahner, B. H., 13 Nov 2017, In: Production Engineering. 11, 6, p. 723-729 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  38. Published

    Holistic process planning chain for robot machining

    Denkena, B., Brüning, J., Windels, L., Euhus, D., Kirsch, S., Overbeck, D. & Lepper, T., 3 Nov 2017, In: Production Engineering. 11, 6, p. 715-722 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  39. Published

    Betriebsbegleitende adaptive Arbeitsplanung und Fertigungssteuerung

    Denkena, B., Wilmsmeier, S. & Stock, W., Oct 2017, In: VDI-Z Integrierte Produktion. 159, 10, p. 30-32 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. Published

    Kompetenzorientierte Arbeitsplatzwechsel: Ein simulationsbasierter Ansatz zur Durchführung von Jobrotation unter Berücksichtigung von Kompetenzen für die Personaleinsatzplanung von Industrieunternehmen

    Denkena, B., Stobrawa, S. & Jenkner, I., Oct 2017, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 112, 10, p. 640-643 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  41. Published

    Schneidkantenmikropräparation an pCBN-Werkzeugen mittels Kurzpulslaser

    Denkena, B., Krödel-Worbes, A. & Grove, T., 9 Sept 2017, In: Diamond Business.

    Research output: Contribution to journal › Article › Transfer

  42. Published

    Fräswerkzeug

    Denkena, B. (Inventor) & Nespor, D. (Inventor), 7 Sept 2017, IPC No. B23C5/04;, B23C5/20, Patent No. DE102016104005A1, 3 Apr 2016, Priority date 4 Mar 2016, Priority No. DE102016104005A

    Research output: Patent

  43. Published

    Thermomechanical Deformation of Complex Workpieces in Milling and Drilling Processes

    Denkena, B., Maaß, P., Schmidt, A., Niederwestberg, D., Vehmeyer, J., Niebuhr, C. & Gralla, P., 2 Sept 2017, Thermal Effects in Complex Machining Processes. p. 219-250 32 p. Chapter 11. (Lecture Notes in Production Engineering; vol. Part F1156).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  44. Published

    Auslegung und Optimierung eines Zerspanungsroboters

    Denkena, B., Bergmann, B. & Lepper, T., Sept 2017, In: VDI-Z Integrierte Produktion. 159, 9, p. 67-69 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  45. Published

    Effect of strontium hexaaluminate addition on the damage-tolerance of yttria-stabilized zirconia

    Gottwik, L., Wippermann, A., Kuntz, M. & Denkena, B., 26 Aug 2017, In: Ceramics international. 43, 17, p. 15891-15898 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  46. Published

    Werkstoffspezifische Mikrogeometrie von Fräswerkzeugen

    Denkena, B., Grove, T. & Picker, T., 22 Aug 2017, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 112, 7-8, p. 481-484 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  47. Published

    Verfahren zur Bearbeitung einer Werkzeugkante eines Zerspanwerkzeugs, Schleifbürste und Bürstschleifmaschine

    Denkena, B. (Inventor), Wippermann, A. (Inventor) & Hasselberg, E. (Inventor), 3 Aug 2017, IPC No. B24D 13/ 10 A I, Patent No. DE102016101525A1, Priority date 28 Jan 2016, Priority No. DE201610101525

    Research output: Patent

  48. Published

    Steigerung der Ermüdungslebensdauer von Wälzlagern durch eine innovative Hartbearbeitung

    Denkena, B., Maiß, O., Grove, T. & Poll, G., Aug 2017, In: antriebstechnik. 59, p. 61-65

    Research output: Contribution to journal › Article › Research

  49. Published

    Temperature and energy partition for grinding of mixed oxide ceramics

    Denkena, B., Gottwik, L., Grove, T. & Wippermann, A., 28 Jul 2017, In: Production Engineering. 11, 4-5, p. 409-417 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  50. Published

    Surface texturing of rolling elements by hard ball-end milling and burnishing

    Denkena, B., Grove, T. & Maiss, O., 25 Jul 2017, In: International Journal of Advanced Manufacturing Technology. 93, 9-12, p. 3713-3721 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  51. Published

    Impact of hard machining on zirconia based ceramics for dental applications

    Denkena, B., Breidenstein, B., Busemann, S. & Lehr, C. M., 21 Jul 2017, In: Procedia CIRP. 65, p. 248-252 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  52. Published

    Material Removal Mechanisms in Grinding of Mixed Oxide Ceramics

    Denkena, B., Busemann, S., Gottwik, L., Grove, T. & Wippermann, A., 21 Jul 2017, In: Procedia CIRP. 65, p. 70-77 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  53. Published

    New tool concept for grinding a plateau-like surface for tribological applications

    Denkena, B., Grove, T., Maiss, O. & Suntharakumaran, V., 20 Jul 2017, In: Production Engineering. 11, 4-5, p. 419-424 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  54. Published

    Competence-based personnel scheduling through production data

    Denkena, B., Dittrich, M. A. & Winter, F., 11 Jul 2017, In: Procedia CIRP. 63, p. 265-270 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  55. Published

    Neuwertige Werkzeuge aus Hartmetallschrott: Recycling von Werkzeugen

    Denkena, B., Dittrich, M., Liu, Y. & Heuwold, N., 11 Jul 2017, Maschinenmarkt.

    Research output: Contribution to specialist publication › Contribution in popular science journal › Transfer

  56. Published

    Performance of a piezo-hydraulic fine positioning device: Experimental analyses with a scaled model

    Denkena, B., Hülsemeyer, L. & Bergmeier, M., 7 Jul 2017, In: Production Engineering. 11, 4-5, p. 613-619 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  57. Published

    Influence of asymmetric cutting edge roundings on surface topography

    Maiss, O., Grove, T. & Denkena, B., 5 Jul 2017, In: Production Engineering. 11, 4-5, p. 383-388 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  58. Published

    Non-Destructive Determination of Residual Stress Depth Profiles of Hybrid Components by Energy Dispersive Residual Stress Measurement

    Breidenstein, B., Denkena, B., Mörke, T. & Prasanthan, V., Jul 2017, 21st Symposium on Composites, 2017. Herrmann, A. S. (ed.). Trans Tech Publications, p. 613-620 8 p. (Key Engineering Materials; vol. 742 KEM).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  59. Published

    Selbstparametrierende Prozessüberwachungssysteme: Selbstanpassende Prozessüberwachungsstrategien für die Serienfertigung

    Denkena, B., Shanib, M., Damm, J. & Bergmann, B., Jul 2017, In: WT Werkstattstechnik. 107, 7-8, p. 487-491 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  60. Published

    Applications in manufacturing

    Denkena, B., Dittrich, M. A., Winter, F., Uhlich, F., Boujnah, H., Mücke, M., Dahlmann, D., Kiesner, J., Neff, T., Behrens, B. A., Bonhage, M., Malik, I. Y., Bonk, C., Grove, T., Seibel, A. & Schmidt, C., 23 Jun 2017, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence - Keys to Industry 4.0. Elsevier Inc., p. 279-407 129 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  61. Published

    Examples of application

    Spitschan, B., Denkena, B., Uhlich, F., Boujnah, H., Winter, F., Dao, Q. H. & von Witzendorff, P., 23 Jun 2017, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence - Keys to Industry 4.0. Elsevier Inc., p. 457-469 13 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  62. Published

    Preface: Production technology on its way to the 4th industrialrevolution

    Denkena, B., 23 Jun 2017, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence - Keys to Industry 4.0. Elsevier, p. xi-xii

    Research output: Chapter in book/report/conference proceeding › Foreword/postscript › Research › peer review

  63. Published

    Sensors, data storage and communication technologies: Optoelectronic integration of radiofrequency communication systems in metalcomponents

    Breidenstein, B., Mörke, T., Hockauf, R., Ostermann, J., Spitschan, B., Schmidt, C., Barton, S., Mroz, G., Reimche, W., Maier, H. J., Behrens, B. A., Bonhage, M., Malik, I. Y., Demminger, C., Klose, C., Taptimthong, P., Wurz, M. C., Jogschies, L., Klaas, D., Düsing, J. F., Koch, J., Suttmann, O., Overmeyer, L., Dao, Q. H., von der Ahe, C., von Witzendorff, P., Geck, B. & Hachicha, B., 23 Jun 2017, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence - Keys to Industry 4.0. 1 ed. Elsevier Inc., p. 7-278 272 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  64. Published

    Normal operation input signals for parameter estimation in underactuated structures

    Borchert, G., Diekmeyer, J., Bild, K. & Raatz, A., 17 Jun 2017, Tagungsband des 2. Kongresses Montage Handhabung Industrieroboter: Industrieroboter. Wiesbaden: Springer Vieweg, p. 43-51 9 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  65. Published

    Cyber-physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence - Keys to Industry 4.0

    Denkena, B. (Editor) & Mörke, T. (Editor), 11 Jun 2017, Elsevier Inc. 480 p.

    Research output: Book/Report › Monograph › Research › peer review

  66. Published

    Influence of AFP process parameters on the temperature distribution used for thermal in-process monitoring

    Schmidt, C., Denkena, B., Hocke, T. & Völtzer, K., 6 Jun 2017, In: Procedia CIRP. 66, p. 68-73 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  67. Published

    Machine Learning Approach for Optimization of Automated Fiber Placement Processes

    Brüning, J., Denkena, B., Dittrich, M. A. & Hocke, T., 6 Jun 2017, In: Procedia CIRP. 66, p. 74-78 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  68. Published

    Das Einzelkornschleifen: Methode zur Analyse der Einzelkornbelastung und deren Auswirkungen auf den Verschleiß beim Schleifen

    Denkena, B., Grove, T. & Bouabid, A., Jun 2017, In: WT Werkstattstechnik. 107, 6, p. 448-452 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  69. Published

    Influence of Residual Stresses Introduced by Manufacturing Processes on Bearing Endurance Time

    Pape, F., Neubauer, T., Maiß, O., Denkena, B. & Poll, G., Jun 2017, In: Tribology letters. 65, 2, 70.

    Research output: Contribution to journal › Article › Research › peer review

  70. Published

    Personaleinsatz zielgerichtet planen und steuern: Aufwandsarme Messung der Mitarbeiterproduktivität und situative Anpassung des Personaleinsatzes

    Denkena, B., Winter, F. & Pischke, D., Jun 2017, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 112, 6, p. 406-409 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  71. Published

    The influence of the cutting tool microgeometry on the machinability of hardened AISI 4140 steel

    Ventura, C. E. H., Chaves, H. S., Campos Rubio, J. C., Abrão, A. M., Denkena, B. & Breidenstein, B., Jun 2017, In: International Journal of Advanced Manufacturing Technology. 90, 9-12, p. 2557-2565 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  72. Published

    Estimation of Dynamic Grinding Wheel Wear in Plunge Grinding

    Ahrens, M., Damm, J., Dagen, M., Denkena, B. & Ortmaier, T., 31 May 2017, In: Procedia CIRP. 58, p. 422-427 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  73. Published

    Thermomechanical coating load in dependence of fundamental coating properties

    Beblein, S., Breidenstein, B., Denkena, B., Pusch, C., Hoche, H. & Oechsner, M., 31 May 2017, In: Procedia CIRP. 58, p. 25-30 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  74. Published

    Concept and control strategy for active jerk-decoupling of feed-drives

    Denkena, B. & Böhse, F., 30 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. & Billington, D. (eds.). p. 421-422 2 p. (Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  75. Published

    Experimental investigation of an electromagnetic linear guide for ultra-precision high performance machining

    Denkena, B., Dahlmann, D. & Krüger, R., 30 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. & Billington, D. (eds.). p. 447-448 2 p. (Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  76. Published

    Mass production for micro end mills

    Denkena, B., Wurz, M., Grove, T., Bouabid, A. & Asadi, E., 30 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. & Billington, D. (eds.). p. 245-246 2 p. (Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  77. Published

    Analysis of an ultra-precision positioning system and parametrization of its structural model for error compensation

    Denkena, B., Dahlmann, D. & Sassi, N., 18 May 2017, In: Procedia CIRP. 62, p. 335-339 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  78. Published

    Combining in-house pooling and sequencing for product regeneration by means of event-driven simulation

    Denkena, B., Dittrich, M. A. & Georgiadis, A., 18 May 2017, In: Procedia CIRP. 62, p. 153-158 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  79. Published

    Concept for automated production of CFRP-metal hybrid compounds integrated in an Automated Fiber Placement process

    Schmidt, C., Denkena, B., Gross, L. & Völtzer, K., 18 May 2017, In: Procedia CIRP. 62, p. 56-61 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  80. Published

    Estimation of production cost in an early design stage of CFRP lightweight structures

    Denkena, B., Horst, P., Schmidt, C., Behr, M. & Krieglsteiner, J., 18 May 2017, In: Procedia CIRP. 62, p. 45-50 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  81. Published

    Thermal image-based monitoring for the automated fiber placement process

    Schmidt, C., Denkena, B., Völtzer, K. & Hocke, T., 18 May 2017, In: Procedia CIRP. 62, p. 27-32 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  82. Published

    Tool deflection control by a sensory spindle slide for milling machine tools

    Denkena, B., Dahlmann, D. & Boujnah, H., 18 May 2017, In: Procedia CIRP. 62, p. 329-334 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  83. Published

    Hybrid tool for high performance structuring and honing of cylinder liners

    Dahlmann, D. & Denkena, B., 8 May 2017, In: CIRP Annals - Manufacturing Technology. 66, 1, p. 113-116 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  84. Published

    Das gentelligente Werkstück

    Denkena, B., Dittrich, M., Uhlich, F., Maibaum, L. & Mörke, T., 20 Apr 2017, Handbuch Industrie 4.0: Geschäftsmodelle, Prozesse, Technik. Reinhart, G. (ed.). Carl Hanser Verlag GmbH & Co. KG, p. 293-321

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  85. Published

    Hybrid cutting apparatus and grooving method using same

    Park, J. K. (Inventor), Denkena, B. (Inventor), Bertram, O. (Inventor) & Dahlmann, D. (Inventor), 16 Mar 2017, IPC No. B23Q 17/ 22 A I, Patent No. WO2017043931, Priority date 14 Apr 2016, Priority No. KR20160045508

    Research output: Patent

  86. Published

    Material removal and chip formation mechanisms of UHC-steel during grinding

    Denkena, B., Grove, T. & Göttsching, T., 16 Mar 2017, In: International Journal of Advanced Manufacturing Technology. 92, 5-8, p. 1619-1627 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  87. Published

    Fluid Dynamic Drive Module for Planar Motion in Three Degrees of Freedom

    Denkena, B., Kayapinar, H. & Schumacher, T., 8 Mar 2017, Small Machine Tools for Small Workpieces. p. 131-143 13 p. Chapter 9. (Lecture Notes in Production Engineering; vol. Part F1155).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  88. Published

    Effect of HM substrates’ cutting edge roundness manufactured by laser machining and micro-blasting on the coated tools’ cutting performance

    Bouzakis, K. D., Charalampous, P., Kotsanis, T., Skordaris, G., Bouzakis, E., Denkena, B., Breidenstein, B., Aurich, J. C., Zimmermann, M., Herrmann, T. & M'saoubi, R., 7 Mar 2017, In: CIRP Journal of Manufacturing Science and Technology. 18, p. 188-197 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  89. Published

    Analytical Modeling of Surface Roughness, Hardness and Residual Stress Induced by Deep Rolling

    Magalhães, F. C., Abrão, A. M., Denkena, B., Breidenstein, B. & Mörke, T., Feb 2017, In: Journal of Materials Engineering and Performance. 26, 2, p. 876-884 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  90. Published

    Augmenting milling process data for shape error prediction

    Denkena, B., Dittrich, M. A. & Uhlich, F., 2 Jan 2017, In: Procedia CIRP. 57, p. 487-491 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  91. Published

    Model Based Compensation of Geometrical Deviations Due to Process Forces

    Denkena, B., Dahlmann, D., Peters, R. & Witt, M., 1 Jan 2017, In: Journal of Machine Engineering. 17, 1, p. 5-16 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  92. Published

    Optimale prozesskettenauslegung in der additiven fertigung: Ansatz zur Standardisierung technologischer Schnittstellen

    Denkena, B., Jacob, S., Wangenheim, C., Göing, F. & Schlichting, C., 1 Jan 2017, Age and Ageing, 22, 4, p. 25-27 3 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  93. Published

    17th Machining Innovations Conference for Aerospace Industry, MIC 2017, 06-07 December 2017, Garbsen Germany

    Denkena, B. (Editor), 2017

    Research output: Book/Report › Conference proceeding › Research

  94. Published

    6th International Conference on Manufacturing Engineering: ICMEN : proceedings : 5-6 October 2017, Thessaloniki, Greece

    Eustathiu, K., Michaēlidēs, N., Skordarēs, G., Bobzin, K., Denkena, B. & Merklein, M., 2017

    Research output: Book/Report › Conference proceeding › Research

  95. Published

    Abschlussbericht - FEBAST - Entwicklung von individuellen Stufenwerkzeugen basierend auf Konstruktionselementen: für die Förderung in der Initiative KMU-innovativ, Technologiefeld: Produktionsforschung : Laufzeit: 01.10.2014-30.09.2016 = (Feature-based simulation assisted development of step tools)

    Henning, S., Hamm, C., Ernst, D., Schäfer, J., Siarska, S. & Denkena, B., 2017

    Research output: Book/Report › Project report/research report › Research

  96. Published

    Adaptive Simulationsmodelle: Integration von Maschinendaten in Materialflusssimulationen

    Denkena, B., Wilmsmeier, S. & Hauck, S., 2017, In: Productivity Management. 22, 3, p. 37-39 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  97. Published

    Aktives fluidisches Führungssystem zur Verringerung des Materialverlusts beim Trennschleifen von Naturstein

    Denkena, B., Bergmann, B., Teige, C., Pelshenke, C., Lenz, D. & Dültgen, P., 2017, In: dihw Magazin. 9, 4, p. 34-38

    Research output: Contribution to journal › Article › Research

  98. Published

    Aplicação de microgeometrias personalizadas no torneamento do aço ABNT 4140 endurecido

    Ventura, C., Chaves, H., Hassui, A., Abrao, A., Denkena, B. & Breidenstein, B., 2017.

    Research output: Contribution to conference › Paper › Research › peer review

  99. Published

    Automatisches Verfahren (Vermessung, Klassifizierung, Planung und Simulation) zur Wiederverwendung von Hartmetallschrott für die Herstellung neuwertiger Zerspanwerkzeuge (Re-Tool): Schlussbericht zu IGF-Vorhaben : Berichtszeitraum 01.03.2014-31.12.2016

    Denkena, B. (Contributor) & Paul, L., 2017

    Research output: Book/Report › Project report/research report › Research

  100. Published

    Einsatzverhalten verrundeter Hartmetallwerkzeuge

    Denkena, B., Bergmann, B. & Richter, B., 2017, In: Maschinenbau - Das Schweizer Industriemagazin. 2017, 5, p. 8-16

    Research output: Contribution to journal › Article › Research

  101. Published

    Ersatzteildisposition und Reihenfolgebildung in der Produktregeneration

    Georgiadis, A., 2017

    Research output: Thesis › Doctoral thesis

  102. Published

    Foreword

    Hansen, H., Bosse, H., Denkena, B., Dröder, K. & Hoffmeister, H., 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology: May 29th - 2nd June 2017, Hannover, DE. Billington, D. & Phillips, D. (eds.). Bedford, 4 p.

    Research output: Chapter in book/report/conference proceeding › Foreword/postscript › Research

  103. Published

    Freiflächenmodifikation zur Erhöhung der Leistungsfähigkeit von Zerspanwerkzeugen

    Denkena, B., Grove, T. & Pape, O., 2017, Spanende Fertigung : Prozesse, Innovationen, Werkstoffe. Essen, p. 57-64 8 p.

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  104. Published

    Grundlagen zur Auslegung von Schneidkantenverrundungen

    Bergmann, B., 2017

    Research output: Thesis › Doctoral thesis

  105. Published

    Kompetenzorientierte Fertigungsplanung und -steuerung

    Winter, F., 2017

    Research output: Thesis › Doctoral thesis

  106. Published

    Korrekte Dimensionierung der Maschine spart Kosten

    Denkena, B., Bergmann, B. & Schmidt, A., 2017, In: MAV. 2017, 11, p. 34-37

    Research output: Contribution to journal › Article › Research

  107. Published

    Methods of analysis for a deeper understanding of the grinding process

    Denkena, B., Grove, T., Göttsching, T., Dzierzawa, P. & Kempf, F., 2017, Proceedings of the 20th International Symposium on Advances in Abrasive Technology: 3-6 December, Okinawa, Japan. p. 945-951 7 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  108. Published

    Mit neuartigem Längenausgleich zu höherer Verfügbarkeit

    Denkena, B., Klemme, H., Bergmann, B. & Müller, M., 2017, In: WB Werkstatt und Betrieb. 10, p. 14-16

    Research output: Contribution to journal › Article › Research

  109. Published

    New production technologies in aerospace industry: MIC 2017, 17th Machining Innovations Conference for Aerospace Industry : proceedings 2017, Hannover, December 6th and 7th 2017

    Denkena, B. (Editor), 2017, (Berichte aus dem IFW; vol. 2017,8)

    Research output: Book/Report › Conference proceeding › Research

  110. Published

    Reibungsminderung bei Wälzlagern und Gleichlaufgelenken durch eine innovative Hartbearbeitung

    Poll, G., Pape, F., Maiß, O. & Denkena, B., 2017, Sonderband Abschlußkolloquium „Ressourceneffiziente Konstruktionselemente“. p. 21-37

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  111. Published

    RETURN - Prozesskette Recycling von Titanspänen: Projekt-Abschlussbericht

    Denkena, B. (Editor), 2017, (Berichte aus dem IFW; vol. 2017,2)

    Research output: Book/Report › Project report/research report › Research

  112. Published

    RETURN - Prozesskette Recycling von Titanspänen: RETURN Gemeinsamer Abschlussbericht (Sachbericht) : Berichtszeitraum: vom 01.08.2013 bis zum 31.07.2016

    Denkena, B. (Contributor), 2017

    Research output: Book/Report › Project report/research report › Research

  113. Published

    Rüstzeitreduzierung durch robotergeführte Schneidkantenpräparation von Werkzeugen „FastPrep“

    Denkena, B., Bergmann, B. & Bergmeier, M., 2017, In: Unter Span. 2017, 2, p. 18-18

    Research output: Contribution to journal › Article › Research

  114. Published

    Schleifen von aluminiumhaltigem UHC-Stahl

    Göttsching, T. C., 2017

    Research output: Thesis › Doctoral thesis

  115. Published

    Selbstanpassende Prozessüberwachunsgsstrategien für die Serienfertigung

    Denkena, B., Bergmann, B., Shanib, M. & Damm, J., 2017, In: wt Werkstattstechnik online. 107, 7/8, p. 487-491

    Research output: Contribution to journal › Article › Research

  116. Published

    Sensorüberwacht in die Tiefe

    Denkena, B., Bergmann, B., Kaiser, S., Bolle, D. & Behrmann, M., 2017, In: WB Werkstatt und Betrieb. 2017, 12, p. 40-42

    Research output: Contribution to journal › Article › Research

  117. Published

    So viel wie nötig, so wenig wie möglich: Intelligente Absaugung in der Faserverbundzerspanung

    Denkena, B., Bergmann, B. & Rahner, B., 2017, In: Unter Span. 2017, 02, p. 20-20

    Research output: Contribution to journal › Article › Research

  118. Published

    THE "A" Coatings in Manufacturing Engineering: 13th Conference : Proceedings : 5-6 October 2017, Thessaloniki, Greece

    Michaēlidēs, N. (Editor), Skordarēs, G. (Editor), Bobzin, K. (Editor), Denkena, B. (Editor), Merklein, M. (Editor) & Eustathiu, K. (Editor), 2017

    Research output: Book/Report › Conference proceeding › Research

  119. 2016

  120. Published

    Kleinskalige, cyber-physische Fördertechnik

    Sohrt, S., Heinke, A., Shchekutin, N., Eilert, B., Overmeyer, L. & Krühn, T., 8 Dec 2016, Download book Handbuch Industrie 4.0. Springer Vieweg, p. 21-44 (Springer Reference Technik).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  121. Published

    Sensorische Werkstücke: Prozessüberwachung durch Sensorintegration am Werkstück

    Denkena, B., Dahlmann, D. & Mücke, M., Dec 2016, In: WT Werkstattstechnik. 106, 11-12, p. 815-820 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  122. Published

    Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures

    Denkena, B., Schmidt, C. & Weber, P., 18 Nov 2016, In: Procedia Manufacturing. 6, p. 96-104

    Research output: Contribution to journal › Article › Research › peer review

  123. Published

    Improving the sensory capabilities of an electromagnetic guided rotary table for the use in machine tools

    Denkena, B. & Bruehne, T., 18 Nov 2016, In: Procedia Manufacturing. 6, p. 39-44

    Research output: Contribution to journal › Article › Research › peer review

  124. Published

    Tools and strategies for grinding of riblets on freeformed compressor blades

    Denkena, B., Grove, T. & Krawczyk, T., 2 Nov 2016, In: Procedia CIRP. 55, p. 182-187 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  125. Published

    Zerspanung von aluminiumhaltigen UHC-Stahl

    Dittrich, M., Nov 2016

    Research output: Thesis › Doctoral thesis

  126. Published

    Autonomous Modular Process Monitoring

    Denkena, B., Dahlmann, D. & Neff, T., 1 Oct 2016, In: 3RD INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: NEW CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING. 26, p. 302-308

    Research output: Contribution to journal › Article › Research › peer review

  127. Published

    Direct Part Marking by Vibration Assisted Face Milling

    Denkena, B., Grove, T. & Seibel, A., 1 Oct 2016, In: 3RD INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: NEW CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING. 26, p. 185-191

    Research output: Contribution to journal › Article › Research › peer review

  128. Published

    Production Monitoring based on Sensing Clamping Elements

    Denkena, B., Dahlmann, D. & Kiesner, J., 1 Oct 2016, In: 3RD INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: NEW CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING. 26, p. 235-244

    Research output: Contribution to journal › Article › Research › peer review

  129. Published

    Self-optimizing cutting process using learning process models

    Denkena, B., Dittrich, M. & Uhlich, F., 1 Oct 2016, In: 3RD INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: NEW CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING. 26, p. 221-226

    Research output: Contribution to journal › Article › Research › peer review

  130. Published

    The Concept of Technical Inheritance in Operation: Analysis of the Information Flow in the Life Cycle of Smart Products

    Demminger, C., Mozgova, I., Quirico, M., Uhlich, F., Denkena, B., Lachmayer, R. & Nyhuis, P., 1 Oct 2016, In: 3RD INTERNATIONAL CONFERENCE ON SYSTEM-INTEGRATED INTELLIGENCE: NEW CHALLENGES FOR PRODUCT AND PRODUCTION ENGINEERING. 26, p. 79-88

    Research output: Contribution to journal › Article › Research › peer review

  131. Published

    A Mechanical Model of Diamond Wire Sawing of Steel Structures

    Denkena, B., Grove, T. & Tatzig, L., Oct 2016, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). Trans Tech Publications, p. 22-27 6 p. (Materials Science Forum; vol. 874).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  132. Published

    Grinding of Riblets on Curved Paths

    Denkena, B., Grove, T. & Harmes, J., Oct 2016, Advances in Abrasive Technology XIX. Krajnik, P., Krajnik, P., Rashid, A., Aoyama, H., Xu, X. & Wang, J. (eds.). p. 28-33 6 p. (Materials Science Forum; vol. 874).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  133. Published

    Repairing parts from nickel base material alloy by laser cladding and ball end milling

    Böß, V., Denkena, B., Wesling, V., Kaierle, S., Rust, F., Nespor, D. & Rottwinkel, B., Oct 2016, In: Production Engineering. 10, 4-5, p. 433-441 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  134. Published

    Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems

    Denkena, B., Dittrich, M. A., Winter, F. & Wagener, C., Oct 2016, In: Production Engineering. 10, 4-5, p. 489-496 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  135. Published

    Tribological measures for controlling material flow in sheet-bulk metal forming

    Löffler, M., Andreas, K., Engel, U., Schulte, R., Groebel, D., Krebs, E., Freiburg, D., Biermann, D., Stangier, D., Tillmann, W., Weikert, T., Wartzack, S., Tremmel, S., Lucas, H., Denkena, B. & Merklein, M., Oct 2016, In: Production Engineering. 10, 4-5, p. 459-470 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  136. Published

    Druckwalze, insbesondere Flexodruck-Walze

    Schönherr, M. (Inventor), Eckl, M. (Inventor), Litwinski, K. M. (Inventor) & Denkena, B. (Inventor), 15 Sept 2016, IPC No. B41F13/08, Patent No. DE102015204496A1, 12 Mar 2015, Priority date 12 Mar 2015, Priority No. DE102015204496A

    Research output: Patent

  137. Published

    Methode zur automatisierten Auslegung kundenindividueller Stufenbohrer: Reduzierung von Kosten und Entwicklungszeiten durch den durchgängigen Einsatz rechnergestützter Technologien

    Denkena, B., Dittrich, M. A. & Henning, S., Sept 2016, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 111, 9, p. 479-482 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  138. Published

    Geometrical Contact Zone Analysis of the Skive Hobbing Process

    Böß, V., Denkena, B., Dittrich, M. A. & Henning, S., 23 Aug 2016, In: Advanced Materials Research. 1140, p. 157-164

    Research output: Contribution to journal › Article › Research › peer review

  139. Published

    Investigation on the Dynamic Behaviour of an Ultrasonic-Levitation Magnetic Guiding System

    Reiners, J. & Denkena, B., 23 Aug 2016, In: Advanced Materials Research. 1140, p. 377-383

    Research output: Contribution to journal › Article › Research › peer review

  140. Published

    Simulation based reduction of residual stress related part distortion

    Dreier, S., Brüning, J. & Denkena, B., 3 Aug 2016, In: Materialwissenschaft und Werkstofftechnik. 47, 8, p. 710-717 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  141. Published

    Calculation method of the contact area in flank machining for continuous generating grinding

    Denkena, B., Schindler, A. & Woiwode, S., Aug 2016, In: Applied mathematical modelling. 40, 15-16, p. 7138-7146 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  142. Published

    Energy consumption characterization in precision hard machining using CBN cutting tools

    Grzesik, W., Denkena, B., Żak, K., Grove, T. & Bergmann, B., Aug 2016, In: International Journal of Advanced Manufacturing Technology. 85, 9-12, p. 2839-2845 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  143. Published

    Hybrid machining of roller bearing inner rings by hard turning and deep rolling

    Maiß, O., Denkena, B. & Grove, T., Aug 2016, In: Journal of Materials Processing Technology. 230, p. 211-216 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  144. Published

    Innovatives Zangenwalzwerkzeug: Neuer Weg zur Oberflächenoptimierung von Turbinenschaufeln

    Denkena, B., Grove, T., Prasanthan, V., Röttger, K., Heni, Z. & Zenk, S., Aug 2016, In: WT Werkstattstechnik. 106, 7-8, p. 571-575 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  145. Published

    Prozessbegleitende Werkstoffübergangsdetetektion: Online-Identifizierung von Werkstoffwechseln bei der spanenden Fertigung hybrider Massivbauteile

    Denkena, B., Dahlmann, D., Brühne, T. & Witt, M., Aug 2016, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 111, 7-8, p. 407-410 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  146. Published

    Energy Efficiency in Machining of Aircraft Components

    Denkena, B., Dittrich, M. A. & Jacob, S., 27 Jul 2016, In: Procedia CIRP. 48, p. 479-482 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  147. Published

    Surface topography after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling

    Nespor, D., Denkena, B., Grove, T. & Pape, O., Jul 2016, In: International Journal of Advanced Manufacturing Technology. 85, 5-8, p. 1585-1602 18 p.

    Research output: Contribution to journal › Article › Research › peer review

  148. Published

    Influence of hard turned roller bearings surface on surface integrity after deep rolling

    Denkena, B., Grove, T. & Maiss, O., 5 Jun 2016, In: Procedia CIRP. 45, p. 359-362 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  149. Published

    Prediction of the Principal Stress Direction for 5-axis Ball End Milling

    Böß, V., Grove, T., Denkena, B., Mücke, A. & Nespor, D., 5 Jun 2016, In: Procedia CIRP. 45, p. 291-294 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  150. Published

    Control model for an over-determined fluid dynamic planar drive

    Denkena, B., Dahlmann, D. & Schumacher, T., 1 Jun 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Bointon, P., Leach, R. & Southon, N. (eds.). (Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  151. Published

    Control system for an ultra-precision electromagnetic linear guide

    Denkena, B., Dahlmann, D. & Krüger, R., 1 Jun 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Bointon, P., Leach, R. & Southon, N. (eds.). (Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  152. Published

    Large-scale surface texturing by vibration assisted face milling

    Denkena, B., Grove, T. & Seibel, A., 1 Jun 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Bointon, P., Leach, R. & Southon, N. (eds.). (Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  153. Published

    Manufacturing of micro end mills by batch processing of silicon carbide

    Denkena, B., Wurz, M., Grove, T., Bouabid, A. & Asadi, E., 1 Jun 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Bointon, P., Leach, R. & Southon, N. (eds.). (Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  154. Published

    Analyse und Gestaltung von Fabriklebenszyklen

    Schmidt, C., Nielsen, L., Thiede, S., Schmidt, M., Herrmann, C. & Nyhuis, P., Jun 2016, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 111, 6, p. 333-336 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  155. Published

    Markierungsfreie Bauteil-Identifikation: Potentiale von Oberflächenmerkmalen zur Bauteil-Identifikation in Fertigung und Nutzungsphase

    Breidenstein, B., Denkena, B., Mörke, T. & Hockauf, R., Jun 2016, In: WT Werkstattstechnik. 106, 6, p. 412-415 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  156. Published

    A new tool concept for milling automotive components

    Denkena, B., Grove, T. & Krödel, A., 30 May 2016, In: Procedia CIRP. 46, p. 444-447 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  157. Published

    Design and Optimisation of an Electromagnetic Linear Guide for Ultra-Precision High Performance Cutting

    Denkena, B., Dahlmann, D. & Krüger, R., 30 May 2016, In: Procedia CIRP. 46, p. 147-150 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  158. Published

    Influence of Machining Parameters on Heat Generation during Milling of Aluminum Alloys

    Denkena, B., Brüning, J., Niederwestberg, D. & Grabowski, R., 30 May 2016, In: Procedia CIRP. 46, p. 39-42 4 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  159. Published

    Design of bronze-bonded grinding wheel properties

    Denkena, B., Grove, T., Bremer, I. & Behrens, L., 6 May 2016, In: CIRP Annals - Manufacturing Technology. 65, 1, p. 333-336 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  160. Published

    Special issue on system-integrated intelligence. New challenges for product and production engineering: Editorial

    Denkena, B., Thoben, K. D., Gausemeier, J., Bosse, S. & Busse, M., 6 May 2016, In: MECHATRONICS. 34, p. A1-A3

    Research output: Contribution to journal › Editorial in journal › Research › peer review

  161. Published

    Thermographic online monitoring system for Automated Fiber Placement processes

    Denkena, B., Schmidt, C., Völtzer, K. & Hocke, T., 4 May 2016, In: Composites Part B: Engineering. 97, p. 239-243 5 p.

    Research output: Contribution to journal › Review article › Research › peer review

  162. Published

    Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti–6Al–4V

    Breidenstein, B., Denkena, B., Vetter, J. & Richter, B., Apr 2016, In: Production Engineering. 10, 2, p. 147-155 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  163. Published

    Prozessüberwachung in der Zerspanung

    Denkena, B., Dahlmann, D., Shanib, M., Damm, J., Kiesner, J. & Neff, T., Apr 2016, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 111, 4, p. 174-177 4 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 3 4 5 6 7 8 ...10 Next