Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Production Engineering and Machine Tools

Organisational unit: Institute

Type of address: Visitor addres
An der Universität 2
30823
Garbsen
321 - 480 out of 1,447Page size: 160
Order:

Publications

  1. 2021

  2. Published

    Erhöhung der Prozessstabilität lang auskragender Zerspanwerkzeuge durch den Einsatz von Reibsegmenten

    Teige, C., 2021, Garbsen. 157 p.

    Research output: Thesis › Doctoral thesis

  3. Published

    Finite element simulation of sintering of metal-bonded grinding wheels

    Denkena, B., Krödel, A., Liu, Y., Kempf, F. & Kostka, M., 2021, In: Procedia CIRP. 102, p. 115-120 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  4. Published

    Geringes Gewicht, groΒer Effekt

    Klemme, H., Denkena, B., Bergmann, B., Beyer, R. & Blunk, H., 2021, In: VDI-Z Integrierte Produktion. 163, 11-12, p. 40-43 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  5. Published

    Gradierte Schleifscheiben beim Nutentiefschliff: Optimierung des Verschleißverhaltens durch Schleifwerkzeugauslegung

    Denkena, B., Krödel, A. & Raffalt, D., 2021, In: WT Werkstattstechnik. 111, 11-12, p. 829-832 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  6. Published

    Grinding Strategies for Local and Stress Orientated Subsurface Modification of Sheet-Bulk Metal Forming Tools

    Keitel, M., Denkena, B. & Krödel-Worbes, A., 2021, Lecture Notes in Production Engineering. Springer Nature, p. 286-306 21 p. (Lecture Notes in Production Engineering; vol. Part F1168).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  7. Published

    Grundlagen zur anwendungsspezifischen Herstellung bronzegebundener Schleifwerkzeuge

    Bouabid, A., 2021, Garbsen. 146 p.

    Research output: Thesis › Doctoral thesis

  8. Published

    Halbleiter-Dehnungsmessstreifen in Werkzeugmaschinen: Neuartige Sensortechnologien zur Überwachung von Fertigungsprozessen

    Bergmann, B., Denkena, B., Reimer, S. P. & Schmidt, A., 2021, In: VDI-Z Integrierte Produktion. 163, 1-2, p. 24-27 4 p.

    Research output: Contribution to journal › Article › Research

  9. Published

    Herstellung von thermoplastischen Leichtbaustrukturen

    Fix, J., Schmitt, C., Nagel, L. & Schmidt, C., 2021, In: VDI-Z Integrierte Produktion. 163, 11-12, p. 83-85 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    Hochdynamisches Festwalzwerkzeug: Neue Möglichkeiten zur innovativen Oberflächenbehandlung von Funktionsbauteilen

    Denkena, B., Breidenstein, B., Maiß, O., Krödel-Worbes, A. & Prasanthan, V., 2021, In: WT Werkstattstechnik. 111, 11-12, p. 851-856 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  11. Published

    Influence of surface and subsurface properties on the bonding between yttria stabilized tetragonal zirconia polycrystals and a veneering ceramic

    Breidenstein, B., Busemann, S., Stiesch, M., Greuling, A. & Worpenberg, C., 2021, In: Journal of Adhesion Science and Technology. 35, 16, p. 1764-1776 13 p.

    Research output: Contribution to journal › Article › Research

  12. Published

    Investigation of asymmetrical fiber metal hybrids used as load introduction element for thin-walled CFRP structures

    Herwig, A., Schmidt, C. & Horst, P., 2021, In: Procedia CIRP. 99, p. 443-447 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  13. Published

    Kinematic simulation to investigate the influence of the cutting edge topography when ball end micro milling

    Klauer, K., Altherr, N., Eifler, M., Kirsch, B., Böß, V., Seewig, J. & Aurich, J. C., 2021, In: Procedia CIRP. 102, p. 109-114 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  14. Published

    Laserpräparierte Hartmetallwerkzeuge

    Denkena, B., Krödel, A. & Murrenhoff, M., 2021, In: VDI-Z Integrierte Produktion. 163, 01-02, p. 38-40

    Research output: Contribution to journal › Article › Research

  15. Published

    Lastangepasste Randzonenfunktionalisierung

    Meyer, K. H., 2021, 135 p.

    Research output: Thesis › Doctoral thesis

  16. Published

    Leistungssteigerung durch spanleitstufen laserpräparierte hartmetallwerkzeuge

    Denkena, B., Krödel, A. & Murrenhoff, M., 2021, In: VDI-Z Integrierte Produktion. 163, 1-2, p. 38-40 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  17. Published

    Machining Processes

    Karpuschewski, B., Byrne, G., Denkena, B., Oliveira, J. & Vereschaka, A., 2021, Springer Handbook of Mechanical Engineering. Grote, K.-H. & Hefazi, H. (eds.). 2 ed. Springer Nature Switzerland AG, p. 409-460 52 p. (Springer Handbooks).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  18. Published

    Maschinelles Lernen in der Prozessplanung

    Stürenburg, L., Denkena, B., Lindauer, M. & Wichmann, M., 2021, In: VDI-Z Integrierte Produktion. 163, 11-12, p. 26-29 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Measures for Energy-Efficient Process Chains

    Denkena, B., Dittrich, M. A., Kettelmann, S. & Reuter, L., 2021, In: Procedia CIRP. 98, p. 288-293 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  20. Published

    Mischanalyse in der Schleifscheibenherstellung

    Denkena, B., Krödel, A., Kostka, M. & Kempf, F. L., 2021, In: WT Werkstattstechnik. 111, 10, p. 735-739 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Modular sequence optimization with hybrid genetic algorithm

    Denkena, B., Dittrich, M. A., Wilmsmeier, S. & Settnik, S. J., 2021, In: Procedia CIRP. 96, p. 51-56 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  22. Published

    Multivariate Vorspannungsüberwachung von Kugelgewindetrieben auf Basis steuerungsinterner Informationen

    Schmidt, A., 2021, Garbsen. 188 p.

    Research output: Thesis › Doctoral thesis

  23. Published

    Online adaption of milling parameters for a stable and productive process

    Bergmann, B. & Reimer, S., 2021, In: CIRP annals. 70, 1, p. 341-344 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  24. Published

    Ontology-based production planning under the consideration of system robustness

    Denkena, B., Dittrich, M. A. & Münch, G. V., 2021, In: Procedia CIRP. 104, p. 547-552 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  25. Published

    Optimised process planning for re-contouring of repair-welded tool moulds by using a specific force model

    Denkena, B., Dittrich, M. A. & Heide, K. M., 2021, 9th CIRP Conference on High Performance Cutting: HPC 2020. Ozturk, E., Curtis, D. & Ghadbeigi, H. (eds.). Elsevier Science B.V., p. 46-49 4 p. (Procedia CIRP; vol. 101).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  26. Published

    Parametric grinding wheel model for material removal simulation of tool grinding processes

    Dittrich, M. A., Denkena, B. & Wichmann, M., 2021, In: Procedia CIRP. 102, p. 381-386 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  27. Published

    Performance increase by process parameter variation during turning of AISI 4140

    Denkena, B., Krödel, A., Hess, U. & Relard, A., 2021, 9th CIRP Conference on High Performance Cutting: HPC 2020. Ozturk, E., Curtis, D. & Ghadbeigi, H. (eds.). Elsevier Science B.V., p. 21-25 5 p. (Procedia CIRP; vol. 101).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  28. Published

    Pinolen-Direktantrieb optimiert die Bearbeitungsleistung: Innovativer Werkzeugmaschinenbau

    Ahlborn, P., Denkena, B. & Bergmann, B., 2021, In: VDI-Z Integrierte Produktion. 163, 9, p. 40-43 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  29. Published

    Prediction of plastic surface defects for 5-axis ball end milling of Ti-6Al-4 V with rounded cutting edges using a material removal simulation

    Denkena, B., Krödel, A., Mücke, A. & Ellersiek, L., 2021, In: CIRP Annals - Manufacturing Technology. 70, 1, p. 91-94 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  30. Published

    Produktive Schleifbearbeitung von PcBN

    Denkena, B., Krödel, A. & Müller-Cramm, D., 2021, In: WT Werkstattstechnik. 111, 10, p. 740-744 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  31. Published

    Ressourceneffizientes Umschleifen verschlissener VHM-Werkzeuge

    Denkena, B., Dittrich, M. A., Wichmann, M. & Friebe, S., 2021, In: WT Werkstattstechnik. 111, 6, p. 430-434 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  32. Published

    Schneidmodul für die adaptive Schnittwinkeleinstellung: Automatisierte Integration von Metalleinsätzen in Faserverbundstrukturen

    Schmidt, C., Denkena, B., Groß, L. & Weykenat, J., 2021, In: VDI-Z Integrierte Produktion. 163, 4, p. 52-55 4 p.

    Research output: Contribution to journal › Comment/debate › Research

  33. Published

    Selbstoptimierende Reihenfolgebildung in der Fertigung

    Denkena, B., Dittrich, M. A. & Fohlmeister, S., 2021, In: WT Werkstattstechnik. 111, 4, p. 212-216 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  34. Published

    Sensorlose Überwachung der Einzelteilfertigung/Spindle-current-based process monitoring using artificial intelligence

    Denkena, B., Bergmann, B., Becker, J. & Blech, H., 2021, In: wt Werkstattstechnik online. 111, 5, p. 305-308 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  35. Published

    Sensory zero-point clamping system for condition and process monitoring

    Denkena, B., Bergmann, B., Kiesner, J. & Buhl, H., 2021, In: Procedia CIRP. 96, p. 359-364 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  36. Published

    Simulation-based surface roughness modelling in end milling

    Denkena, B., Dittrich, M. A. & Huuk, J., 2021, In: Procedia CIRP. 99, p. 151-156 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  37. Published

    Surface shape deviations in face milling of multi-material-designed components

    Hasselberg, E., 2021, 173 p.

    Research output: Thesis › Doctoral thesis

  38. Published

    Tool deflection compensation by drive signal-based force reconstruction and process control

    Denkena, B., Bergmann, B. & Stoppel, D., 2021, In: Procedia CIRP. 104, p. 571-575 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  39. Published

    Topology optimization of highly stressed machine tool components using the SLM process

    Denkena, B., Bergmann, B., Klemme, H., Beyer, R. E. & Blunk, H., 2021, Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2021. Leach, R. K., Nisbet, C. & Phillips, D. (eds.). p. 499-502 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  40. 2020

  41. Published

    Energieeffiziente Herstellung von Titanbauteilen: Übergreifender Werkstoffkreislauf zwischen additiver und subtraktiver Fertigung durch die Entwicklung einer Prozesskette zur Umwandlung von Spanmaterial in Pulver

    Denkena, B., Krödel, A. & Matthies, J., 8 Dec 2020, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 115, 9, p. 617-620 4 p.

    Research output: Contribution to journal › Article › Research

  42. Published

    Prozessregelung in der Radsatzbearbeitung

    Denkena, B., Bergmann, B. & Blech, H. M., 8 Dec 2020, In: WB Werkstatt und Betrieb. 153, 10, p. 26

    Research output: Contribution to journal › Article › Research

  43. Published

    Präzision für die bearbeitung von freiformflächen

    Heckmann, M., Schubert, T., Brouwer, D. & Denkena, B., 1 Dec 2020, In: VDI-Z Integrierte Produktion. 162, 12, p. 41-43 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  44. Published

    Neuartige Sensortechnologien überwachen Fertigungsprozesse: Kostengünstige Alternative

    Denkena, B., Bergmann, B., Reimer, S. P. & Schmidt, A., 30 Nov 2020, In: VDI-Z Integrierte Produktion. 15 p.

    Research output: Contribution to journal › Article › Research

  45. Published

    Generation of tailored subsurface zones in steels containing metastable austenite by adaptive machining and validation by eddy current testing

    Fricke, L. V., Nguyen, H. N., Breidenstein, B., Denkena, B., Dittrich, M., Maier, H. & Zaremba, D. S. F. D., 26 Nov 2020, In: TM. Technisches Messen. 87, 11, p. 704-713 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  46. Published

    Mechatronic Damping Systems As Enablers for Autonomous Machine Tools

    Denkena, B., Bergmann, B. & Böhse, F., 13 Nov 2020, Proceedings of the Machining Innovations Conference (MIC) 2020. p. 166-173

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  47. Published

    Using AutoML to Optimize Shape Error Prediction in Milling Processes

    Denkena, B., Dittrich, M., Lindauer, M. T., Mainka, J. M. & Stürenburg, L. K., 12 Nov 2020, In: SSRN Electronic Journal. 2020, 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  48. Published

    Influence of thermal effects in turn-rolling

    Kuhlemann, P., Denkena, B., Krödel, A. & Beblein, S., Nov 2020, In: CIRP Journal of Manufacturing Science and Technology. 31, p. 294-304 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  49. Published

    Oxygen-free production: New manufacturing approach in grinding

    Denkena, B., Krödel-Worbes, A. & Hansen, N., Nov 2020, In: hp - tooling. 2020, 04, p. 32-36 5 p.

    Research output: Contribution to journal › Article › Transfer

  50. Published

    Self-optimizing compensation of surface deviations in 5-axis ball-end milling based on an enhanced description of cutting conditions

    Dittrich, M. & Uhlich, F., Nov 2020, In: CIRP Journal of Manufacturing Science and Technology. 31, p. 224-232 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  51. Published

    Hoher Druck und abgestimmte Haltezeit: Mit hoher Energieeffizienz hoch belastbare Schleifkörper herstellen

    Krödel-Worbes, A., Denkena, B. & Dzierzawa, P., 30 Oct 2020, In: Diamond Business. 2020, 04, p. 50-56 7 p.

    Research output: Contribution to journal › Article › Transfer

  52. Published

    Gestaltabweichungen nach der Rekonturierung reparaturgeschweißter Bauteile

    Mücke, A., 29 Oct 2020, 154 p.

    Research output: Thesis › Doctoral thesis

  53. Published

    Correlation between Coating Properties and Thermal Load of CrAlNCoated Cutting Tools During Machining of AISI4140

    Breidenstein, B., Denkena, B., Heckemeyer, A. & Beblein, S., 20 Oct 2020, In: Defect and Diffusion Forum (Online). 404 , p. 53-60 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  54. Published

    Grobe CBN-Schleifkörner erreichen Materialabtrag wie beim Drehen: Schruppschleifen

    Denkena, B., Krödel-Worbes, A. & Wilckens, M., 20 Oct 2020, Industrieanzeiger.

    Research output: Contribution to specialist publication › Contribution in popular science journal › Communication

  55. Published

    Residual Stress Measurements in PVD Coatings of Carbide Cutting Tools Directly in the Cutting Edge

    Breidenstein, B., Vogel, N., Dietrich, M., Behrens, H. & Andersson, J. M., 20 Oct 2020, Defect and Diffusion Forum. p. 61-67 7 p. (Defect and Diffusion Forum; vol. 404).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  56. Published

    Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses

    Vornberger, A., Picker, T., Pötschke, J., Herrmann, M., Denkena, B., Krödel, A. & Michaelis, A., 14 Oct 2020, In: MATERIALS. 13, 20, p. 1-13 13 p., 4571.

    Research output: Contribution to journal › Article › Research › peer review

  57. Published

    Investigations on tailored forming of aisi 52100 as rolling bearing raceway

    Coors, T., Mildebrath, M., Büdenbender, C., Saure, F., Faqiri, M. Y., Kahra, C., Prasanthan, V., Chugreeva, A., Matthias, T., Budde, L., Pape, F., Nürnberger, F., Hassel, T., Hermsdorf, J., Overmeyer, L., Breidenstein, B., Denkena, B., Behrens, B. A., Maier, H. J. & Poll, G., 13 Oct 2020, In: Metals. 10, 10, p. 1-19 19 p., 1363.

    Research output: Contribution to journal › Article › Research › peer review

  58. Published

    Production-related surface and subsurface properties and fatigue life of hybrid roller bearing components

    Breidenstein, B., Denkena, B., Krödel, A., Prasanthan, V., Poll, G., Pape, F. & Coors, T., 7 Oct 2020, In: Metals. 10, 10, p. 1-17 17 p., 1339.

    Research output: Contribution to journal › Article › Research › peer review

  59. Published

    Norms/Normen

    Breidenstein, B., Heikebrügge, S., Schaumann, P. & Dänekas, C., 1 Oct 2020, In: HTM - Journal of Heat Treatment and Materials. 75, 6, p. 419-432 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  60. Published

    Cooling of motor spindles—a review

    Denkena, B., Bergmann, B. & Klemme, H., Oct 2020, In: International Journal of Advanced Manufacturing Technology. 110, 11-12, p. 3273-3294 22 p.

    Research output: Contribution to journal › Review article › Research › peer review

  61. Published

    Wear behaviour of coated cemented carbide inserts in an oxygen-free atmosphere when machining ti-6al-4v

    Denkena, B., Dittrich, M. A., Krödel, A., Worpenberg, S., Matthies, J. & Schaper, F., Oct 2020, THE "A" Coatings - Selected peer-reviewed papers from the 14th International Conference 2020, THE A COATINGS. Merklein, M., Bouzakis, K. D., Bouzakis, K. D., Michailidis, N., Denkena, B. & Bobzin, K. (eds.). Vol. 404 DDF. p. 28-35 8 p. (Defect and Diffusion Forum).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  62. Published

    Intelligente Werkzeugzustandsüberwachung beim Schleifen

    Denkena, B., Breidenstein, B. & Strug, M., 29 Sept 2020, In: JOT, Journal fuer Oberflaechentechnik. 60, p. 58-60 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  63. Published

    Wear Behaviour of PCBN, PCD, Binderless PCBN and Cemented Carbide Cutting Inserts When Machining Ti-6Al-4V in an Oxygen-Free Atmosphere

    Schaper, F., Denkena, B., Dittrich, M., Krödel-Worbes, A., Matthies, J. & Worpenberg, S., 25 Sept 2020, Production at the leading edge of technology : Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP). Berlin, p. 275-283 9 p. (Lecture Notes in Production Engineering; vol. Part F1136).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  64. Published

    Prepreg tack: A review of mechanisms, measurement,and manufacturing implication

    Budelmann, D., Schmidt, C. & Meiners, D., 21 Sept 2020, In: Polymer composites. 41, 9, p. 3440-3458 19 p.

    Research output: Contribution to journal › Review article › Research › peer review

  65. Published

    Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges

    Denkena, B., Michaelis, A., Herrmann, M., Pötschke, J., Krödel, A., Vornberger, A. & Picker, T., 15 Sept 2020, In: WEAR. 456-457, 203395.

    Research output: Contribution to journal › Article › Research › peer review

  66. Published

    Effect of sandblasting on the surface roughness and residual stress of 3Y-TZP (zirconia)

    Finger, C., Stiesch, M., Eisenburger, M., Breidenstein, B., Busemann, S. & Greuling, A., 14 Sept 2020, In: SN Applied Sciences. 2, 10, 1700.

    Research output: Contribution to journal › Article › Research › peer review

  67. Published

    Reconstruction of Process Forces in a Five-Axis Milling Center with a LSTM Neural Network in Comparison to a Model-Based Approach

    Denkena, B., Bergmann, B. & Stoppel, D., Sept 2020, In: Journal of Manufacturing and Materials Processing. 4, 3, 4030062.

    Research output: Contribution to journal › Article › Research › peer review

  68. Published

    Towards Dry Machining of Titanium-Based Alloys: A New Approach Using an Oxygen-Free Environment

    Maier, H., Herbst, S., Denkena, B., Dittrich, M., Schaper, F., Worpenberg, S., Gustus, R. & Maus-Friedrichs, W., 28 Aug 2020, In: Metals. 10, 9, p. 1-8 8 p., 1161.

    Research output: Contribution to journal › Article › Research › peer review

  69. Published

    Influence of the cutting direction angle on the tool wear behavior in face plunge grinding of PcBN

    Denkena, B., Grove, T., Müller-Cramm, D. & Krödel, A., 15 Aug 2020, In: WEAR. 454-455, 203325.

    Research output: Contribution to journal › Article › Research › peer review

  70. Published

    Mikrostrukturierte Zylinderlaufbuchsen optimieren Verbrennungsmotoren: Werkzeuglösungen für die automobile Zukunft

    Denkena, B., Bergmann, B. & Handrup, M. S., 5 Aug 2020, In: VDI-Z Integrierte Produktion. 11 p.

    Research output: Contribution to journal › Article › Research

  71. Published

    Hybride Bearbeitung mittels Schleifwalzen: Anwendungsforschung

    Denkena, B., Krödel-Worbes, A. & Gartzke, T., Aug 2020, In: WB Werkstatt und Betrieb. 2020, 06, p. 18 1 p.

    Research output: Contribution to journal › Other contribution to journal › Transfer

  72. Published

    Schleifwalzen – hybride Bearbeitung aus Schleifen und Walzen: Kombinationsverfahren

    Denkena, B., Krödel-Worbes, A. & Gartzke, T., Aug 2020, In: WB Werkstatt und Betrieb.

    Research output: Contribution to journal › Article › Transfer

  73. Published

    Time-domain simulation of milling processes including process damping

    Denkena, B., Grabowski, R., Krödel, A. & Ellersiek, L., Aug 2020, In: CIRP Journal of Manufacturing Science and Technology. 30, p. 149-156 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  74. Published

    Influência da operação de roleteamento sobre a integridade superficial do aço abnt 1020

    Santos, F. F. D., Silva, S. D. C., Abrão, A. M., Denkena, B., Breidenstein, B. & Meyer, K., 24 Jul 2020, In: Revista Materia. 25, 2, 13 p., e-12651.

    Research output: Contribution to journal › Article › Research › peer review

  75. Published

    Modelagem e análise numéricas da operação de roleteamento do aço abnt 4140

    Cangussu, V. M., Abrão, A. M., Magalhães, F. D. C., Denkena, B., Breidenstein, B. & Meyer, K., 24 Jul 2020, In: Revista Materia. 25, 2, 21 p., e-12665.

    Research output: Contribution to journal › Article › Research › peer review

  76. Published

    Feeling Machine for Process Monitoring of Turning Hybrid Solid Components

    Denkena, B., Bergmann, B. & Witt, M., 10 Jul 2020, In: Metals. 10, 7, 12 p., 930.

    Research output: Contribution to journal › Article › Research › peer review

  77. Published

    Formation of White Etching Layers by Deep Rolling of AISI 4140 Steel

    Souza, P. S., Cangussu, V. M., Câmara, M. A., Abrão, A. M., Denkena, B., Breidenstein, B. & Meyer, K., Jul 2020, In: Journal of Materials Engineering and Performance. 29, p. 4351-4359 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  78. Published

    Grinding of transformation-toughened mixed oxide ceramic

    Denkena, B., Krödel, A., Wippermann, A. & Wolters, P., Jul 2020, In: International Journal of Advanced Manufacturing Technology. 109, 5-6, p. 1463-1478 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  79. Published

    Material identification during turning by neural network

    Denkena, B., Bergmann, B., Handrup, M. & Witt, M., 24 Jun 2020, In: Journal of Machine Engineering. 20, 2, p. 65-76 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  80. Published

    Environmental evaluation of process chains

    Denkena, B., Dittrich, M. A. & Onken, L., 13 Jun 2020, In: Procedia CIRP. 88, p. 265-269 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  81. Published

    Wear curve based online feature assessment for tool condition monitoring

    Denkena, B., Bergmann, B. & Stiehl, T. H., 13 Jun 2020, In: Procedia CIRP. 88, p. 312-317 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  82. Published

    Schneidkantenpräparation mit nachgiebigen Diamantpolierwerkzeugen: Eine neue Methode ermöglicht die Schneidkantenpräparation in der Werkzeugschleifmaschine

    Denkena, B., Krödel-Worbes, A. & Hein, M., 10 Jun 2020, Produktion - die Zeitung für die deutsche Industrie, 2020, 09, p. 12 1 p.

    Research output: Contribution to specialist publication › Contribution in popular science journal › Communication

  83. Published

    Influence of Residual Stresses in heat-treated High-Speed Steels on the Adhesion of CrAlN Coatings

    Denkena, B., Breidenstein, B., Lucas, H., Keitel, M., Tillmann, W. & Stangier, D., 8 Jun 2020, In: HTM - Journal of Heat Treatment and Materials. 75, 3, p. 163-176 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  84. Published

    A comparative analysis of ceramic and cemented carbide end mills

    Dröder, K., Karpuschewski, B., Uhlmann, E., Arrabiyeh, P. A., Berger, D., Busemann, S., Hartig, J., Madanchi, N., Mahlfeld, G. & Sommerfeld, C., Jun 2020, In: Production Engineering. 14, 3, p. 355-364 10 p.

    Research output: Contribution to journal › Article › Research

  85. Published

    Analytic roughness prediction by deep rolling

    Denkena, B., Abrão, A., Krödel, A. & Meyer, K., Jun 2020, In: Production Engineering. 14, 3, p. 345-354 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  86. Published

    Optimization of delivery adherence based on capacity planning and bid pricing

    Denkena, B., Dittrich, M., Wilmsmeier, S. & Stamm, S. C., Jun 2020, In: Production Engineering. 14, 3, p. 309-318 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  87. Published

    Process stability of a novel roughing-finishing end mill

    Denkena, B., Grabowski, R., Krödel-Worbes, A. & Ellersiek, L. G., Jun 2020, In: Production Engineering. 14, 3, p. 395-405 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  88. Published

    Influence of residual stress depth distribution on lifecycle behaviour of AISI4140

    Meyer, K., Denkena, B., Breidenstein, B. & Abrão, A. M., 31 May 2020, In: Procedia CIRP. 87, p. 450-455 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  89. Published

    Konzepte für PcBN-Zerspanungswerkzeuge

    Denkena, B., Krödel-Worbes, A. & Müller-Cramm, D., 24 May 2020

    Research output: Non-textual form › Web publication/site › Communication

  90. Published

    Feeling machine for material-specific machining

    Bergmann, B. & Witt, M., 19 May 2020, In: CIRP annals. 69, 1, p. 353-356 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  91. Published

    Wirtschaftlicher mit Laser

    Denkena, B., Krödel-Worbes, A. & Murrenhoff, M. E., 10 May 2020

    Research output: Non-textual form › Web publication/site › Communication

  92. Published

    Single grain grinding: a novel approach to model the interactions at the grain/bond interface during grinding

    Denkena, B., Bouabid, A. & Kroedel, A., 7 May 2020, In: International Journal of Advanced Manufacturing Technology. 107, 11-12, p. 4811-4822 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  93. Published

    KI-gestützte Prozessüberwachung in der Zerspanung

    Denkena, B., Bergmann, B., Reimer, S., Schmidt, A., Stiehl, T. & Witt, M., May 2020, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 115, 5, p. 295-298 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  94. Published

    Prediction of part distortion in re-contouring processes

    Böß, V., Rust, F., Denkena, B. & Dittrich, M. A., May 2020, In: CIRP Journal of Manufacturing Science and Technology. 29, Part A, p. 25-35 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  95. Published

    Energy efficient process chains for the production of powertrains

    Denkena, B., Dittrich, M. A., Bergmeier, M., Handrup, M., Meyer, K., Onken, L. & Schmidt, C., 30 Apr 2020, In: Procedia Manufacturing. 43, p. 48-55 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  96. Published

    Influence of the manufacturing process on the local properties of bronze-bonded grinding tools

    Bouabid, A., Denkena, B., Breidenstein, B. & Krödel, A., 13 Apr 2020, In: Journal of Manufacturing Science and Engineering, Transactions of the ASME. 142, 6, 8 p., 061004.

    Research output: Contribution to journal › Article › Research › peer review

  97. Published

    Electrical energy and material efficiency analysis of machining, additive and hybrid manufacturing

    Wippermann, A., Gutowski, T. G., Denkena, B., Dittrich, M. & Wessarges, Y., 1 Apr 2020, In: Journal of cleaner production. 251, 119731.

    Research output: Contribution to journal › Article › Research › peer review

  98. Published

    New profiling approach with geometrically defined cutting edges for sintered metal bonded CBN grinding layers

    Denkena, B., Grove, T. & Suntharakumaran, V., Apr 2020, In: Journal of Materials Processing Technology. 278, 116473.

    Research output: Contribution to journal › Article › Research › peer review

  99. Published

    An independent solution for the precise orbit determination of Mercury planetary orbiter (MPO)

    HosseiniArani, A., Bertone, S., Arnold, D., Jäggi, A. & Thomas, N., 23 Mar 2020

    Research output: Other contribution › Other publication › Research

  100. Published

    Additive manufacturing of metal-bonded grinding tools

    Denkena, B., Krödel, A., Harmes, J., Kempf, F., Griemsmann, T., Hoff, C., Hermsdorf, J. & Kaierle, S., 20 Mar 2020, In: International Journal of Advanced Manufacturing Technology. 107, 5-6, p. 2387-2395 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  101. Published

    Statistical approaches for semi-supervised anomaly detection in machining

    Denkena, B., Dittrich, M. A., Noske, H. & Witt, M., 19 Mar 2020, In: Production Engineering. 14, 3, p. 385-393 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  102. Published

    Identifizierung des Einflusses von Mischparametern auf die Schüttdichte von Schleifscheibenmischungen

    Denkena, B., Krödel-Worbes, A. & Geschwind, T., 1 Mar 2020, In: Diamond Business. 74, p. 46 - 52 6 p.

    Research output: Contribution to journal › Article › Research

  103. Published

    Harte Kante dem Verschleiß: Drehwerkzeug-Auslegung

    Denkena, B., Krödel-Worbes, A. & Heckemeyer, A. C., Mar 2020, In: WB Werkstatt und Betrieb. 153, 2, p. 44-46 3 p.

    Research output: Contribution to journal › Article › Research

  104. Published

    Wear mechanism model for grinding of PcBN cutting inserts

    Denkena, B., Grove, T., Behrens, L. & Müller-Cramm, D., Mar 2020, In: Journal of Materials Processing Technology. 277, 116474.

    Research output: Contribution to journal › Article › Research › peer review

  105. Published

    Novel continuous generating grinding process for the production of cutting tools

    Denkena, B., Krödel, A. & Theuer, M., 21 Feb 2020, In: CIRP Journal of Manufacturing Science and Technology. 28, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  106. Published

    Innovative method for cutting edge preparation with flexible diamond tools

    Denkena, B., Krödel, A. & Hein, M., 18 Feb 2020, In: Procedia CIRP. 86, p. 121-125 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  107. Published

    Continuous modelling of machine tool failure durations for improved production scheduling

    Denkena, B., Dittrich, M., Keunecke, L. & Wilmsmeier, S., 12 Feb 2020, In: Production Engineering. 14, 2, p. 207-215 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  108. Published

    Spannköpfe überwachen sich selbst

    Denkena, B., Bergmann, B. & Kiesner, J., Feb 2020, In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online). 115, 1-2, p. 74-76 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  109. Published

    Experimental and numerical analysis of hard turning with multi-chamfered cutting edges

    Magalhães, F. C., Ventura, C. E. H., Abrão, A. M. & Denkena, B., Jan 2020, In: Journal of manufacturing processes. 49, p. 126-134 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  110. Published

    Simulation-based compensation of deflection errors in helical flute grinding

    Dittrich, M., Böß, V., Wichmann, M. & Denkena, B., Jan 2020, In: CIRP Journal of Manufacturing Science and Technology. 28, p. 136-143 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  111. Published

    Synergistic approaches to ultra-precision high performance cutting

    Schönemann, L., Berger, D., Dörgeloh, T., Riemer, O., Brinksmeier, E., Krüger, R., Schreiber, P., Denkena, B., Hochbein, J., Parsa, N., Schenck, C. & Kuhfuß, B., Jan 2020, In: CIRP Journal of Manufacturing Science and Technology. 28, p. 38-51 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  112. Published

    Analysis of different machine learning algorithms to learn stability lobe diagrams

    Denkena, B., Bergmann, B. & Reimer, S., 2020, In: Procedia CIRP. 88, p. 282-287 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  113. Published

    Anwenderfreundliche Prozessüberwachungssysteme: Nachvollziehbare und automatische Parametrierung durch aufgabenorientierte Modularisierung

    Denkena, B., Bergmann, B. & Stiehl, T. H., 2020, In: WT Werkstattstechnik. 110, 6, p. 435-439 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  114. Published

    Bestimmung des Mittenverlaufs mit Ultraschallsensoren: Prozessparallele Berechnung aus Ultraschall-Wanddickenmessungen

    Denkena, B., Bergmann, B. & Klages, T. N., 2020, In: VDI-Z Integrierte Produktion. 162, 12, p. 20-22 3 p.

    Research output: Contribution to journal › Comment/debate › Research › peer review

  115. Published

    Cooperative multi-agent system for production control using reinforcement learning

    Dittrich, M. & Fohlmeister, S., 2020, In: CIRP Annals - Manufacturing Technology. 69, 1, p. 389-392 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  116. Published

    Cyber-physisches Konzept mit dezentralen Softwareagenten für eine dezentrale Produktionssteuerung in der Werkstattfertigung

    Fohlmeister, S., Denkena, B., Dittrich, M. A. & Keunecke, L., 2020, In: VDI-Z Integrierte Produktion. 162, 5-6, p. 62-65 4 p.

    Research output: Contribution to journal › Comment/debate › Research

  117. Published

    Deflection compensation on a force sensing mobile machine tool

    Denkena, B., Bergmann, B., Wnendt, E. & Brühne, T., 2020, In: Procedia Manufacturing. 52, p. 156-161 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  118. Published

    Die fühlende Seilschleifmaschine: Entwicklung einer kraftgeregelten vollelektrischen mobilen Seilschleifmaschine

    Denkena, B., Bergmann, B. & Rahner, B. H., 2020, In: WT Werkstattstechnik. 110, 9, p. 602-607 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  119. Published

    Die intelligente Werkzeugmaschine: Machine Learning für Prozessparameter

    Denkena, B., Bergmann, B. & Reimer, S. P., 2020, In: IT & Production. 21, 3, p. 58-60

    Research output: Contribution to journal › Article › Research

  120. Published

    Digitalisierung mit Weiterbildung gestalten: Handlungsfelder für die Weiterbildung zur Digitalisierung nutzen

    Denkena, B., Dittrich, M. A., Vibora Münch, G. & Thiem, S., 2020, In: WT Werkstattstechnik. 110, 4, p. 241-244 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  121. Published

    Dreaming neural networks for adaptive polishing

    Dittrich, M. A., Rosenhahn, B., Magnor, M., Denkena, B., Malek, T., Munderloh, M. & Kassubeck, M., 2020, Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2020. p. 263-266 4 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  122. Published

    Efficient generation of a digital twin using object detection for data acquisition and XML-interface for model creation

    Denkena, B., Dittrich, M. A., Stobrawa, S. & Stjepandić, J., 2020, In: Procedia CIRP. 93, p. 274-279 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  123. Published

    Einfluss der Schleifscheibenanstellung auf die Oberflächenqualität: Bearbeitungswinkel zur Produktivitätsoptimierung beim Schleifen freigeformter Oberflächen

    Denkena, B., Krödel, A. & Wilckens, M., 2020, In: WT Werkstattstechnik. 110, 6, p. 389-392 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  124. Published

    Energy efficient machine tools

    Denkena, B., Abele, E., Brecher, C., Dittrich, M. A., Kara, S. & Mori, M., 2020, In: CIRP annals. 69, 2, p. 646-667 22 p.

    Research output: Contribution to journal › Article › Research › peer review

  125. Published

    Estudo sobre a integridade superficial do aço abnt 4140 após a operação de torneamento: Study on the surface integrity of AISI 4140 steel after turning

    Martins, A. M., Souza, P. S., Santos, A. J. D., Abrão, A. M., Denkena, B., Breidenstein, B. & Meyer, K., 2020, In: Revista Materia. 25, 2, p. 1-12 12 p., e-12627.

    Research output: Contribution to journal › Article › Research › peer review

  126. Published

    Fertigungszelle für Implantate kompensiert geometrische Fehler: Autonome Fertigung von Kleinserien und gleichzeitige Qualitätssicherung als Ziel

    Bergmann, B., Denkena, B. & Kaiser, S., 2020, In: MAV. 2020, 12, p. 48-50

    Research output: Contribution to journal › Article › Research

  127. Published

    Fräsen von aluminiumhaltigem UHC-Stahl

    Weidle, A., 2020, Garbsen. 156 p.

    Research output: Thesis › Doctoral thesis

  128. Published

    Fräsen von Stahlbeton

    Hess, U., 2020, Garbsen. 136 p.

    Research output: Thesis › Doctoral thesis

  129. Published

    Function-optimised generation of an adapted target model for mechanical re-contouring of fan blades

    Denkena, B., Böß, V., Dittrich, M. A. & Kenneweg, R., 2020, In: Procedia CIRP. 93, p. 562-567 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  130. Published

    Herstellung und Charakterisierung von Schleifbelägen mit Diamantkorn: Teil 2

    Denkena, B., Krödel-Worbes, A. & Kempf, F. L., 2020, In: dihw Magazin. 12, 03, p. 12-17 6 p.

    Research output: Contribution to journal › Article › Research

  131. Published

    Herstellung und Charakterisierung von Schleifbelägen mit Diamantkorn: Teil 1

    Denkena, B., Krödel-Worbes, A. & Kempf, F. L., 2020, In: dihw Magazin. 12, 2, p. 18-22

    Research output: Contribution to journal › Article › Research

  132. Published

    Höhere Produktivität durch Werkzeugverschleiß: Abnutzungsbedingte Prozessdämpfung wirkt Ratterschwingungen entgegen

    Relard, A., Denkena, B. & Krödel, A., 2020, In: VDI-Z Integrierte Produktion. 162, 7-8, p. 44-46 3 p.

    Research output: Contribution to journal › Comment/debate › Research › peer review

  133. Published

    Influence of subsurface properties on the application behavior of hybrid components

    Breidenstein, B., Denkena, B., Meyer, K. & Prasanthan, V., 2020, In: Procedia CIRP. 87, p. 302-308 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  134. Published

    Influence of the material on the measurement of surface roughness using eddy current technology

    Fricke, L. V., Jannis Lehnhardt, B., Barton, S., Nguyen, H. N., Breidenstein, B., Zaremba, D. & Maier, H. J., 2020, I2MTC 2020 - International Instrumentation and Measurement Technology Conference, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. 9128881

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  135. Published

    Innovative Fertigung von Zerspanwerkzeugen

    Theuer, M., Denkena, B. & Krödel-Worbes, A., 2020, In: dihw Magazin. 12, 04, p. 34-37 4 p.

    Research output: Contribution to journal › Article › Transfer

  136. Published

    In-process compensation of straightness deviation in BTA deep hole drilling using experimental and simulative analysis

    Gerken, J. F., Klages, N., Biermann, D. & Denkena, B., 2020, In: Procedia CIRP. 93, p. 1417-1422 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  137. Published

    Integrierte Kraftmessung macht Zerspanungsysteme sensibler: Zerspanung mit mehr Gefühl

    Bergmann, B., Denkena, B., Reimer, S. P. & Schmidt, A., 2020, In: Maschinenmarkt.

    Research output: Contribution to journal › Article › Research

  138. Published

    Intelligente Fertigungszelle für die Implantatherstellung: Integration von Messtechnik steigert Produktivität und erfüllt medizintechnische Richtlinien

    Denkena, B., Dittrich, M. A., Winkler, M., Kaiser, S., Rettinger, D., Notarbartolo, K., Mack, A., Doreth, K. & Lindner, H., 2020, In: WT Werkstattstechnik. 110, 9, p. 629-633 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  139. Published

    Klassifizierung und Untersuchung von thermografisch erfassten Fertigungsfehlern im Automated-Fiber-Placement-Prozess

    Hocke, T., 2020, Garbsen. 175 p.

    Research output: Thesis › Doctoral thesis

  140. Published

    Kontinuierliches Wälzschleifen von Zerspanwerkzeugen

    Theuer, M., 2020, Garbsen. 139 p.

    Research output: Thesis › Doctoral thesis

  141. Published

    Laserbasierte Schneidkantenpräparation: neue Ansätze zur Steigerung der Prozesssicherheit und Standzeit von pCBN-Werkzeugen

    Denkena, B., Krödel-Worbes, A. & Heckemeyer, A. C., 2020, In: Diamond Business. 2020, 2, p. 12-17 6 p.

    Research output: Contribution to journal › Article › Transfer

  142. Published

    Leistungspotenzial ausgeschöpft: Neues aktives Dämpfungskonzept für Motorspindeln

    Denkena, B., Bergmann, B., Böhse, M., Königsberg, J. & Ponick, B., 2020, In: MAV. 2020, 10, p. 58-61

    Research output: Contribution to journal › Article › Research

  143. Published

    Magnetische Führungssysteme optimieren die Zerspanung

    Denkena, B., Bergmann, B., Schumacher, T., Fuchs, J., Schmidtmann, J., Krüger, R. & Brühe, T., 2020, In: Maschinenmarkt. 126, 17

    Research output: Contribution to journal › Article › Research

  144. Published

    Mechanical finishing of wire arc additive manufactured aluminum parts

    Denkena, B., Krödel, A. & Pillkahn, P., 2020, Proceedings of the Machining Innovations Conference (MIC) 2020. p. 174-180 7 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  145. Published

    Methodology for thermal optimization of motor spindles

    Bergmann, B., Denkena, B. & Klemme, H., 2020, p. 76-79.

    Research output: Contribution to conference › Paper › Research

  146. Published

    Mit fühlender Schleifspindel zu höherer Genauigkeit

    Bergmann, B., Denkena, B. & Buhl, H., 2020, In: NCFertigung. 41, 11, p. 42-45

    Research output: Contribution to journal › Article › Research

  147. Published

    Neues Verfahren zur Regeneration verschlissener Fräswerkzeuge: Ressourceneffizientes Umschleifen von VHM-Fräsern

    Wichmann, M., Denkena, B., Dittrich, M. A. & Friebe, S., 2020, In: VDI-Z Integrierte Produktion. 162, 9, p. 45-47 3 p.

    Research output: Contribution to journal › Comment/debate › Research

  148. Published

    Numerical investigation of a layered hybrid load introduction element for thin-walled CFRP structures

    Herwig, A., Schmidt, C. & Horst, P., 2020, ECCM 2018 - 18th European Conference on Composite Materials.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  149. Published

    Oberflächen charakterisieren

    Nordmeyer, H., Denkena, B. & Krödel, A., 2020, In: Konstruktion. 72, 4, p. IW2-IW5

    Research output: Contribution to journal › Article › Research › peer review

  150. Published

    Optical Quality Control for Adaptive Polishing Processes

    Kassubeck, M., Malek, T., Muhlhausen, M., Kappel, M., Castillo, S., Dittrich, M. A. & Magnor, M., 2020, 2020 IEEE Southwest Symposium on Image Analysis and Interpretation, SSIAI 2020 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 90-94 5 p. 9094615. (Proceedings of the IEEE Southwest Symposium on Image Analysis and Interpretation; vol. 2020-March).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  151. Published

    Optimierte Schneidkantenpräparation: Präzisionswerkzeugherstellung

    Denkena, B., Krödel-Worbes, A., Hein, M. & Mauke, M., 2020, In: WB Werkstatt und Betrieb. 2020, 08, p. 27 1 p.

    Research output: Contribution to journal › Article › Research

  152. Published

    Optimierte Schneidkantenpräparation: Neuartige nachgiebige Diamantpolierwerkzeuge im Einsatz

    Denkena, B., Krödel-Worbes, A., Hein, M. & Mauke, M., 2020, In: WB Werkstatt und Betrieb.

    Research output: Contribution to journal › Article › Research

  153. Published

    Optimierte Zerspanung: magnetische Führung

    Bergmann, B., Denkena, B., Brühne, T., Krüger, R., Schumacher, T., Fuchs, J. & Schmidtmann, J., 2020, In: Schweizer Maschinenmarkt (SMM). 121, 20, p. 45-48

    Research output: Contribution to journal › Article › Research

  154. Published

    Piezo-actuated hybrid tool for the micro structuring of cylinder liners in an energy-efficient process chain

    Denkena, B., Bergmann, B. & Handrup, M., 2020, In: Procedia Manufacturing. 52, p. 138-143 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  155. Published

    Preload Control of Spindle Bearings by Means of Shape Memory Alloys

    Denkena, B., Bergmann, B. & Teige, C., 2020, Proceedings of the Machining Innovations Conference (MIC) 2020. p. 154-159 (SSRN Electronic Journal).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  156. Published

    Production of chip breakers on cemented carbide tools using laser ablation

    Denkena, B., Krödel, A., Ellersiek, L. & Murrenhoff, M., 2020, In: Procedia CIRP. 94, p. 834-839 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  157. Published

    Produktionsplanung mit dem digitalen Zwilling

    Denkena, B., Stobrawa, S., Sommer, M. & Stjepandić, J., 2020, In: WT Werkstattstechnik. 110, 10, p. 661-665 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  158. Published

    Prozesskontrolle auch bei tiefen Bohrungen: Entwicklung eines mechatronischen Werkzeugsystems für das BTA-Tiefbohren zur Kompensation des Mittenverlaufs

    Biermann, D., Iovkov, I., Gerken, J. F., Denkena, B., Bergmann, B. & Klages, N., 2020, In: WT Werkstattstechnik. 110, 1-2, p. 50-53 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  159. Published

    Pulsed laser micro ablation of polycrystalline cubic boron nitride

    Denkena, B., Krödel, A., Heckemeyer, A. & Murrenhoff, M., 2020, In: Procedia CIRP. 94, p. 823-828 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  160. Published

    Robuste Produktion im volatilen Umfeld: Eine simulationsbasierte Analyse zur Implementierung von Robustheit gegenüber Störungen

    Stobrawa, S., Wöllnitz, S. & Dittrich, M. A., 2020, In: WT Werkstattstechnik. 110, 4, p. 209-213 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  161. Published

    Schneidkantenverrundungen von Zerspanwerkzeugen

    Denkena, B., Krödel-Worbes, A. & Picker, T., 2020, In: Maschinenbau - Das Schweizer Industriemagazin. 2020, 08, p. 12-14 3 p.

    Research output: Contribution to journal › Article › Transfer

  162. Published

    Selbstschärfende Mikroschleifwerkzeuge

    Asadi, E., Hockauf, R. & Wurz, M. C., 2020, Jahrbuch Schleifen, Honen, Läppen und Polieren. Essen

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

Previous 1 2 3 4 5 6 7 8 ...10 Next