Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Electrothermic Process Engineering

Organisational unit: Institute

Type of address: Visitor addres
Wilhelm-Busch-Straße 4
30167
Hannover
401 - 480 out of 777Page size: 80
Order:

Publications

  1. 2009

  2. Published

    Numerical investigation of different concepts to control the temperature field at the induction heating of aluminium billets by rotation in superconductive magnets

    Nacke, B., Nikanorov, A. & Zlobina, M., 2009, 6th International Conference on Electromagnetic Processing of Materials: October 19 - 23, 2009, Dresden, Germany. Dresden, p. 177-180

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  3. Published

    Numerical investigation of TiAl melting and solidification in induction furnace with cold crucible

    Jakovics, A., Umbrashko, A., Baake, E. & Ciscato, D., 2009, 6th International Conference on Electromagnetic Processing of Materials: October 19 - 23, 2009, Dresden, Germany. Dresden, p. 517-520

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  4. Published

    Numerical study of 3D melt flow and dopant mass transfer under influence of AC and DC magnetic fields in industrial FZ Si single cristal growth process

    Nacke, B., Lacis, K., Muiznieks, A. & Ratnieks, G., 2009, 6th International Conference on Electromagnetic Processing of Materials: October 19 - 23, 2009, Dresden, Germany. Dresden, p. 854

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  5. Published

    Optimal control of induction heaters for forging

    Nacke, B. & Pleshivtseva, Y., 2009, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2009, 1, p. 57-62

    Research output: Contribution to journal › Article › Research

  6. Published

    Particle Transport in the recirculated flows under EM convection

    Baake, E., Kirpo, M., Jakovics, A. & Nacke, B., 2009, 6th International Conference on Electromagnetic Processing of Materials: October 19 - 23, 2009, Dresden, Germany. Dresden, p. 553-556

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  7. Published

    Praxisnahe Simulation des Wärme- und Stofftransports in der Schmelze von Induktionsöfen

    Baake, E., 2009, In: Giesserei : die Zeitschrift für Technik, Innovation und Management. 96, 10, p. 34-41

    Research output: Contribution to journal › Article › Research

  8. Published

    Principles of Heating Processes: Edition 13: Electric arc heating

    Baake, E., 2009, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 7, 3, p. 250-252

    Research output: Contribution to journal › Article › Research

  9. Published

    Principles of Heating Processes: Edition 12: Infrared Heating

    Baake, E., 2009, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 7, 2, p. 159-160

    Research output: Contribution to journal › Article › Research

  10. Published

    Principles of Heating Processes: Edition 11: Laser heating

    Baake, E., 2009, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 7, 1, p. 65-67

    Research output: Contribution to journal › Article › Research

  11. Published

    Simulation of the 3D mass transfer of molten glasses in the inductor-crucible

    Nacke, B., Niemann, B., Geža, V. & Jakovics, A., 2009, 6th International Conference on Electromagnetic Processing of Materials: October 19 - 23, 2009, Dresden, Germany. Dresden, p. 525-528

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  12. Published

    Unsteady 3D and analytical analysis of segregation process in floating zone silicon single crystal growth

    Lacis, K., Muižnieks, A., Jekabsons, N., Rudevičs, A. & Nacke, B., 2009, In: Magnetohydrodynamics. 45, 4, p. 549-556 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  13. Published

    Unsteady 3D LES modeling of turbulent melt flow with AC travelling EM fields for a laboratory model of the CZ silicon crystal growth system

    Krauze, A., Rudevičs, A., Muižnieks, A., Sabanskis, A., Jekabsons, N. & Nacke, B., 2009, In: Magnetohydrodynamics. 45, 4, p. 605-611 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  14. 2008

  15. Published

    Energieeffizienz in der Elektrothermischen Prozesstechnik

    Baake, E. & Beneke, F., Dec 2008, Elektrowärme international (EWI), 4, p. 243-247 5 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  16. Published

    Numerical modelling of an innovative induction heating technique for aluminium extrusion process

    Zlobina, M., Nacke, B., Nikanorov, A. & Galunin, S., 19 Aug 2008, Proceedings of IFOST-2008 - 3rd International Forum on Strategic Technologies. p. 487-491 5 p. 4602946. (Proceedings of IFOST-2008 - 3rd International Forum on Strategic Technologies).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  17. Published

    Recent research and developments in induction heating at the Institute of Electrotechnology of Leibniz University Hannover

    Nacke, B., 19 Aug 2008, Proceedings of IFOST-2008 - 3rd International Forum on Strategic Technologies. p. 70-74 5 p. 4602967. (Proceedings of IFOST-2008 - 3rd International Forum on Strategic Technologies).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  18. Published

    Investigation of asymmetry effects in a heater-magnet module for TMF VGF and LEC growth by three-dimensional numerical modeling

    Kasjanow, H., Nacke, B., Eichler, S., Jockel, D., Frank-Rotsch, C., Lange, P., Kießling, F. M. & Rudolph, P., Apr 2008, In: Journal of Crystal Growth. 310, 7-9, p. 1540-1545 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Numerical studies of the melting process in the induction furnace with cold crucible

    Umbrasko, A., Baake, E., Nacke, B. & Jakovics, A., 7 Mar 2008, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 27, 2, p. 359-368 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    Particle transport in recirculated liquid metal flows

    Kirpo, M., Jakovičs, A., Nacke, B. & Baake, E., 7 Mar 2008, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 27, 2, p. 377-386 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  21. Published

    Selected paper from HES-07

    Lupi, S., Dughiero, F. & Baake, E., 7 Mar 2008, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 27, 2, p. 101-105 5 p.

    Research output: Contribution to journal › Editorial in journal › Research › peer review

  22. Published

    3D electrical and thermal simulation of a resistance heated EFG system

    Wipprecht, S., Kasjanow, H. & Nacke, B., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 343-348

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  23. Published

    3D modelling of electromagnetic processes in induction system with cold crucible

    Pozniak, I., Pechenkov, A., Nacke, B. & Kudryash, M., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 269

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  24. Published

    3D unsteady modelling of the influence of applied magnetic field on the melt flow in FZ Si single crystal growth

    Nacke, B., Lacis, K., Muiznieks, A., Rudevičs, A., Jekabsons, N. & Ratnieks, G., 2008, Proceedings of the 7th International Pamir Conference Fundamental and Applied MHD and COST P17 Annual Workshop 2008: Presqu'Île de Giens, France, September 8 - 12, 2008. Reims, Vol. 2. p. 637-642

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  25. Published

    5th International Scientific Colloquium “Modelling for Electromagnetic Processing” in Hannover – Ein Rückblick

    Baake, E. & Jakovics, A., 2008, In: Elektrowärme international (EWI). 66, 4, p. 269-274

    Research output: Contribution to journal › Article › Research

  26. Published

    Adaptive induction system for heating of aluminium billet by rotation in DC magnetic field

    Zlobina, M., Nacke, B. & Nikanorov, A., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 349-354

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  27. Published

    Aluheat: a superconducting approach of an aluminium billet heater

    Ulferts, A. & Nacke, B., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 71-76

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  28. Published

    Analysis of transient heat and mass exchange in induction channel furnaces using LES

    Baake, E., Langejürgen, M., Kirpo, M. & Jakovics, A., 2008, Proceedings of the 7th International Pamir Conference Fundamental and Applied MHD and COST P17 Annual Workshop 2008: Presqu'Île de Giens, France, September 8 - 12, 2008. Reims, p. 63-67

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  29. Published

    Berührungsloses Messen von Temperaturen an Aluminiumoberflächen

    Ulferts, A. & Nacke, B., 2008, In: Elektrowärme international (EWI). 2008, 1, p. 37-39

    Research output: Contribution to journal › Article › Research › peer review

  30. Published

    COMPEL - The international journal for computation and mathematics in electrical and electronic engineering: Special Issue: SPECIAL SECTION: Selected Papers from the International Conference on Heating by Electromagnetic Sources

    Lupi, S. (Editor), Dughiero, F. (Editor) & Baake, E. (Editor), 2008, Emerald Group Publishing Ltd.

    Research output: Book/Report › Special issue › Research

  31. Published

    Den Produktionsablauf im Blick: Einsparpotentiale beim Schmelzen von Metallen

    Baake, E., 2008, In: Giesserei Erfahrungsaustausch : das Fachmagazin für Praktiker. 2008, 6, p. 13-17

    Research output: Contribution to journal › Article › Research

  32. Published

    Development of melting and casting processes of TiAl in the cold induction crucible vacuum furnace

    Jarczyk, G., Baake, E., Umbrashko, A., Fellmann, H. & Tiefers, R., 2008, 12th World Conference on Investment Casting & Equipment Expo: Dallas, Texas. Montvale

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  33. Published

    Electromagnetically induced segregation for generation of a gradient microstructure in aluminum castings

    Aquilar, J., Grüneberg, C., Sommer, B., Niehues, J., Haimerl, M., Nacke, B. & Langejürgen, M., 2008, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2008, 3

    Research output: Contribution to journal › Article › Research

  34. Published

    Electromagnetic and thermal analysis of induction heating of billets by rotation in DC magnetic field

    Zlobina, M., Nacke, B. & Nikanorov, A., 2008, In: Przeglad Elektrotechniczny. 84, 11, p. 111-114 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  35. Published

    Electrothermal Processes

    Nacke, B. & Baake, E., 2008, Pocket manual of heat processing: fundamentals, calculations, processes. Essen, p. 344-447

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  36. Published

    Elektromagnetisch induzierte Seigerung zur Erzeugung eines Gradientengefüges in Aluminium-Gussbauteilen

    Aguilar Cascante, F. J., Grüneberg, C., Nacke, B., Langejürgen, M., Sommer, B., Niehues, J. & Haimerl, M., 2008, In: Elektrowärme international (EWI). 2008, 2, p. 101-106

    Research output: Contribution to journal › Article › Research

  37. Published

    Estimation of temperature difference and integral flow through channel of ICF

    Frishfelds, V., Jakovics, A., Nacke, B. & Baake, E., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 291-296

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  38. Published

    Functional materials on the base of lanthanum chromite

    Suvorov, S., Zuev, A., Pozniak, I., Pechenkov, A., Shatunov, A., Kydryash, M., Niemann, B. & Nacke, B., 2008, Third International Forum on Strategic Technologies, 2008: IFOST 2008. p. 102-103 2 p. 4602902

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  39. Published

    Generation of graded microstructure by electromagnetic induced segregation of primary crystals in aluminium silicon alloys

    Nacke, B. & Langejürgen, M., 2008, Proceedings of the 7th International Pamir Conference Fundamental and Applied MHD and COST P17 Annual Workshop 2008: Presqu'Île de Giens, France, September 8 - 12, 2008. Reims, Vol. 1. p. 125-130

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  40. Published

    Induction assisted welding methods for high strength steels

    Mach, M., Schülbe, H. & Nacke, B., 2008, Future trends in steel development, processing technologies and applications: bringing the automotive, supplier and steel industries together ; SCT 2008 ; 2nd International Conference on Steels in Cars and Trucks ... took place from June 01 to 05 in Wiesbaden, Germany. Düsseldorf, p. 376-382

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  41. Published

    Induktive Erwärmung von Al-Bolzen mittels supraleitender Spule

    Nacke, B., 2008, Workshop Elektroprozesstechnik: 28.- 29. August 2008, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau, 2

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  42. Published

    Induktiv unterstütztes Schweißen hochfester Stähle

    Mach, M., 2008, Workshop Elektroprozesstechnik: 28.- 29. August 2008, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau, 11

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  43. Published

    Investigation and design of induction assisted welding processes

    Mach, M., Schülbe, H. & Nacke, B., 2008, In: Przeglad Elektrotechniczny. 84, 11, p. 228-231 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  44. Published

    Investigation of asymmetry effects in a heater magnet-module for TMF, VGF and VCz growth by three-dimensional numerical modelling

    Kasjanow, H., Nacke, B., Eichler, S., Frank-Rotsch, C., Lange, P., Kießling, M. & Rudolph, P., 2008, The 15th International Conference on Crystal Growth and the 13th Biennial Workshop on Organometallic Vapor Phase Epitaxy, Salt Lake City, Utah, USA, 12-17 August, 2007. Amsterdam: North-Holland Publ Co

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  45. Published

    Investigation of mass and heat transfer of molten glass in the inductor-crucible

    Niemann, B., Nacke, B. & Kudryash, M., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 277-282

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  46. Published

    Investigation of relative magnetic permeabilty as input data for numerical simulation of induction surface hardening

    Zedler, T., Nikanorov, A. & Nacke, B., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 119-126

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  47. Published

    LES of heat and mass exchange in induction channel furnaces

    Kirpo, M., Jakovičs, A., Nacke, B., Baake, E. & Langejürgen, M., 2008, In: Przeglad Elektrotechniczny. 84, 11, p. 154-158 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    LES study of particle transport in turbulent recirculated liquid metal flows

    Baake, E., Kirpo, M., Jakovics, A. & Nacke, B., 2008, Proceedings of the 7th International Pamir Conference Fundamental and Applied MHD and COST P17 Annual Workshop 2008: Presqu'Île de Giens, France, September 8 - 12, 2008. Reims, Vol. 1. p. 103-107

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  49. Published

    Liquid phase synthesis of lanthanum chromite at induction furnace with slitted crucible

    Pozniak, I., Pechenkov, A., Suvorov, S., Zuev, D. A., Nacke, B. & Niemann, B., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 321-326

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  50. Published

    Mathematical modelling of industrial FZ silicon single crystal processes for electronic and photovoltaic industries

    Nacke, B., Muiznieks, A., Riemann, H. & Lüdge, A., 2008, The 15th International Conference on Crystal Growth and the 13th Biennial Workshop on Organometallic Vapor Phase Epitaxy, Salt Lake City, Utah, USA, 12-17 August, 2007. Amsterdam: North-Holland Publ Co

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  51. Published

    Melt flow and skull formation modelling possibilities for TiAl melting process in induction furnace with cold crucible

    Umbrashko, A., Baake, E. & Jakovics, A., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 331-336

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  52. Published

    Neuartiges Verfahren zur Herstellung optischer Gläser im Induktortiegel

    Niemann, B., Nacke, B. & Kudryash, M., 2008, In: Elektrowärme international (EWI). 2008, 2, p. 119-122

    Research output: Contribution to journal › Article › Research

  53. Published

    Neue Verfahren zum Schwebeschmelzen und zur Durchflussregelung von Metallschmelzen

    Nacke, B., 2008, Workshop Elektroprozesstechnik: 28.- 29. August 2008, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau, 12

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  54. Published

    New innovative induction system for the production of pure high temperature glasses

    Niemann, B., Nacke, B. & Kudryash, M., 2008, In: Przeglad Elektrotechniczny. 84, 11, p. 170-174 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  55. Published

    Numerical analysis of coupled physics for induction hardening of moveable workpieces

    Galunin, S., Zlobina, M., Blinov, K., Nikanorov, A., Zedler, T. & Nacke, B., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 59-64

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  56. Published

    Numerical analysis of coupled physics for induction heating of movable workpieces

    Galunin, S., Blinov, K., Nikanorov, A., Zedler, T., Nacke, B. & Zlobina, M., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 59-64

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  57. Published

    Numerical investigations of melt flow and skull formation in cold crucible melting process

    Nacke, B., Umbrashko, A., Baake, E. & Jakovics, A., 2008, Proceedings of the 7th International Pamir Conference Fundamental and Applied MHD and COST P17 Annual Workshop 2008: Presqu'Île de Giens, France, September 8 - 12, 2008. Reims, Vol. 1. p. 185-190

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  58. Published

    Numerical Simulation of Mass and Heat Transport in Induction Channel Furnaces

    Langejürgen, M., Kirpo, M., Jakovics, A. & Baake, E., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 35-40

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  59. Published

    Principles of Heating Processes: Edition 10: Plasma heating

    Baake, E., 2008, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 6, 4, p. 318-320

    Research output: Contribution to journal › Article › Research

  60. Published

    Principles of Heating Processes: Edition 8: Indirect resistance heating

    Baake, E., 2008, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 6, 2, p. 143-145

    Research output: Contribution to journal › Article › Research

  61. Published

    Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008

    Baake, E. (Editor) & Nacke, B. (Editor), 2008, Hannover. 360 p.

    Research output: Book/Report › Conference proceeding › Research

  62. Published

    Special method of parametric optimization of induction heating systems

    Pleshivtseva, Y., Rapoport, E., Efimov, A., Nacke, B. & Nikanorov, A., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 229-234

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  63. Published

    Thermal and hydrodynamic analysis of the melting process in the cold crucible using 3D modeling

    Umbrasko, A., Baake, E., Nacke, B. & Jakovics, A., 2008, In: Heat transfer research. 39, 5, p. 413-421 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  64. Published

    Three-dimensional transient modelling of the melt flow in a TMF VCz system for GaAs crystal growth

    Nacke, B., Muiznieks, A., Kasjanow, H., Krauze, A., Kiessling, F., Rehse, U. & Rudolph, P., 2008, Proceedings of the 7th International Pamir Conference Fundamental and Applied MHD and COST P17 Annual Workshop 2008: Presqu'Île de Giens, France, September 8 - 12, 2008. Reims, Vol. 2. p. 643-649

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  65. Published

    Time-optimal control of energy- Efficient heating of aluminium billets rotating in DC magnetic field

    Pleshivtseva, Y., Zaikina, N., Nacke, B. & Nikanorov, A., 2008, In: Przeglad Elektrotechniczny. 84, 11, p. 120-123 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  66. Published

    Unsteady 3D LES modelling of turbulent melt flow with AC traveling EM fields for a laboratory model of the CZ silicon crystal growth system

    Krauze, A., Rudevičs, A., Muiznieks, A., Sabanskis, A., Jekabsons, N. & Nacke, B., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 85-90

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  67. Published

    Use of EM fields in production processes for PV cells

    Nacke, B., 2008, In: Przeglad Elektrotechniczny. 84, 11, p. 124-128 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  68. Published

    Use of induction technology for optimizes heat treatment in laser beam welding processes

    Mach, M., Schülbe, H. & Nacke, B., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 215-220

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  69. Published

    Using if open source code library OpenFOAM for 3D magnetohydrodynamic calculations in semiconductor crystal growth technologies

    Rudolph, P., Frank-Rotsch, C., Kiessling, F., Miller, W., Rehse, U., Klein, O., Lechner, C., Sprekels, J., Nacke, B., Kasjanow, H., Lange, P., Ziems, M., Lux, B., Czupalla, M., Root, O., Trautmann, V. & Bethin, G., 2008, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing : Hannover, October 27 - 29, 2008. Hannover, p. 79-84

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  70. 2007

  71. Published

    3D coupled electromagnetic and thermal modelling of EFG silicon tube growth

    Kasjanow, H., Nikanorov, A., Nacke, B., Behnken, H., Franke, D. & Seidl, A., 1 May 2007, In: Journal of crystal growth. 303, 1, p. 175-179 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  72. Published

    Simulation of turbulent metal flows

    Baake, E., Umbrashko, A., Nacke, B. & Jakovics, A., 23 Mar 2007, In: GAMM Mitteilungen. 30, 1, p. 133-148

    Research output: Contribution to journal › Article › Research

  73. Published

    Convective phenomena in large melts including magnetic fields

    Muiznieks, A., Krauze, A. & Nacke, B., 23 Jan 2007, In: Journal of crystal growth. 303, 1 SPEC. ISS., p. 211-220 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  74. Published

    3D coupled electromagnetic and thermal modelling of EFG silicon tube growth

    Kasjanow, H., Nikanorov, A., Nacke, B., Behnken, H., Franke, D. & Seidl, A., 2007, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 19 - 22, 2007. Padova, p. 381-386

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  75. Published

    3D modelling of rotational field for steering of molten metal

    Galunin, S., Blinov, Y., Volchkov, A., Nacke, B. & Nikanorov, A., 2007, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 19 - 22, 2007. Padova, p. 123-128

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  76. Published

    3D unsteady modelling of the melt flow in the FZ silicon crystal growth process

    Muižnieks, A., Lacis, K. & Nacke, B., 2007, In: Magnetohydrodynamics. 43, 3, p. 377-386 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  77. Published

    Alternative processing for laminar compound materials based on induction heating

    Baake, E., Schülbe, H., Nikanorov, A., Mergen, R. & Eberhard, A., 2007, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 19 - 22, 2007. Padova, p. 691-696

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  78. Published

    Analysis of experimental and simulation data for the liquid metal flow in a cylindrical vessel

    Kirpo, M., Jakovičs, A., Baake, E. & Nacke, B., 2007, In: Magnetohydrodynamics. 43, 2, p. 161-172 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  79. Published

    Analysis of the effectiveness of the melting process in the cold crucible using 3D modelling

    Umbrashko, A., Baake, E., Nacke, B., Jakovics, A. & Kirpo, M., 2007, Proceedings of the 2007 International Symposium on Liquid Metal Processing and Casting: Nancy, France, September 2 - 5, 2007. Nancy, p. 273-277

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  80. Published

    Bericht vom “International Symposium on Heating by Electromagnetic Sources (HES-07)” in Padua/Italien

    Zedler, T. & Baake, E., 2007, In: Elektrowärme international (EWI). 65, 3, p. 185-186

    Research output: Contribution to journal › Article › Research

  81. Published

    Development of specialized modelling tools for crystal growth processes with magnetic fields

    Rudevičs, A., Muižnieks, A. & Nacke, B., 2007, In: Magnetohydrodynamics. 43, 2, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  82. Published

    Dreidimensionale Numerische Modellierung Eines EFG-systems

    Kasjanow, H., Nikanorov, A., Nacke, B., Behnken, H., Franke, D. & Seidl, A., 2007, Elektrowärme international (EWI), 1, p. 38-42 5 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  83. Published

    Electromagnetic segregation of cast parts

    Langejürgen, M. & Nacke, B., 2007, In: Magnetohydrodynamics. 43, 2, p. 183-188 6 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 12 3 4 5 6 7 8 9 10 Next