Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Electrothermic Process Engineering

Organisational unit: Institute

Type of address: Visitor addres
Wilhelm-Busch-Straße 4
30167
Hannover
321 - 400 out of 777Page size: 80
Order:

Publications

  1. 2011

  2. Published

    Neue Marktchancen durch innovativen Stromeinsatz im Prozesswärmebereich

    Baake, E., 2011, Prozesswärme: Energieeffizienz in der industriellen Thermoprozesstechnik; eine Sonderpublikation der Zeitschriften Gaswärme International und Elektrowärme international. Essen, p. 319-329

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  3. Published

    New approach for intermediate induction heating of preformed forging parts within a warm forming process chain

    Mach, M. & Baake, E., 2011, Future trends in steel development, processing technologies and applications: bringing the automotive, supplier and steel industries together ; SCT2011 ; the 3rd International Conference on Steels in Cars and Trucks, 2011, took place from June 5 to 9 in Salzburg, Austria. Düsseldorf, p. 238-245

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  4. Published

    Numerical investigations of induction heat treatment for the press hardening process

    Schülbe, H., Jestremski, M. & Nacke, B., 2011, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 9, 4, p. 373-378

    Research output: Contribution to journal › Article › Research

  5. Published

    Numerical modeling of free surface dynamics of melt in induction crucible furnace

    Jakovics, A., Baake, E., Nacke, B. & Spitans, S., 2011, Proceedings of the 8th International PAMIR Conference on Fundamental and Applied MHD: Borgo, Corsica, France, September 5 - 9, 2011. Grenoble, Vol. 2. p. 677-681

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  6. Published

    Numerical modeling of ultrasonic vibration in crystallization processes

    Nacke, B., Ubbenjans, B., Frank-Rotsch, C., Rudolph, P. & Virbulis, J., 2011, Proceedings of the 8th International PAMIR Conference on Fundamental and Applied MHD: Borgo, Corsica, France, September 5 - 9, 2011. Grenoble, p. 831

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  7. Published

    Numerical modelling of free surface dynamics of melt in an alternate electromagnetic field

    Spitans, S., Jakovičs, A., Baake, E. & Nacke, B., 2011, In: Magnetohydrodynamics. 47, 4, p. 385-398 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  8. Published

    Numerical Simulation Tools and Methods used at the Institute of Electrotechnology

    Nacke, B. & Baake, E., 2011, p. 25.

    Research output: Contribution to conference › Paper › Research

  9. Published

    Numerische Untersuchungen induktiver Erwärmungsprozesse für das Presshärten

    Schülbe, H., Jestremski, M. & Nacke, B., 2011, In: Elektrowärme international (EWI). 69, 3, p. 283-288

    Research output: Contribution to journal › Article › Research

  10. Published

    Physical basics and industrial applications of heating processes: Edition 17: Electrical discharge machining

    Baake, E., 2011, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 9, 4, p. 379-380

    Research output: Contribution to journal › Article › Research

  11. Published

    Physical basics and industrial applications of heating processes: 16: High frequency heating

    Baake, E., 2011, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 9, 3, p. 285-287

    Research output: Contribution to journal › Article › Research

  12. Published

    Recent applications and development trends of induction heating processes

    Baake, E., Schülbe, H. & Nacke, B., 2011, Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011. p. 483-487 5 p. (Microwave and RF Power Applications: Proceeding of the 13th International Conference on Microwave and Radio Frequency Heating, AMPERE 2011).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. Published

    Simplified calculation of molten metal free surfaces in electromagnetic fields: Part I: Mathematical model

    Pesteanu, O., 2011, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 9, 3, p. 259-262

    Research output: Contribution to journal › Article › Research

  14. Published

    Simplified calculation of molten metal free surfaces in electromagnetic fields: Part I: Experimental verifications

    Pesteanu, O. & Baake, E., 2011, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 9, 4, p. 355-358

    Research output: Contribution to journal › Article › Research

  15. Published

    Statistical analysis of the influence of forces on particles in EM driven recirculated turbulent flows

    Ščepanskis, M., Jakovičs, A. & Baake, E., 2011, In: Journal of Physics: Conference Series. 333, 1, 012015.

    Research output: Contribution to journal › Conference article › Research › peer review

  16. Published

    The oscillations appearing during the process of particle homogenization in EM induced flow of ICF

    Ščepanskis, M., Jakovics, A., Baake, E. & Nacke, B., 2011, Proceedings of the 8th International PAMIR Conference on Fundamental and Applied MHD: Borgo, Corsica, France, September 5 - 9, 2011. Grenoble, Vol. 2. p. 653-657

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  17. Published

    Vereinfachte Berechnung der freien Oberfläche von Flüssigmetallen im elektromagnetischen Feld: Teil I: Mathematisches Modell

    Pesteanu, O., 2011, In: Elektrowärme international (EWI). 69, 2, p. 171-174

    Research output: Contribution to journal › Article › Research

  18. Published

    Vereinfachte Berechnung der freien Oberfläche von Flüssigmetallen im elektromagnetischen Feld: Teil II: Experimentelle Überprüfungen

    Pesteanu, O. & Baake, E., 2011, In: Elektrowärme international (EWI). 69, 4, p. 381-384

    Research output: Contribution to journal › Article › Research

  19. 2010

  20. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 8: Hochfrequenzerwärmung

    Baake, E., Dec 2010, In: Elektrowärme international (EWI). 68, 4, p. 313-314 2 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  21. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 7: Laserstrahlerwärmung

    Baake, E., Sept 2010, In: Elektrowärme international (EWI). 68, 3, p. 242-244 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  22. Published

    Long-Term computations of turbulent flow and temperature field in the induction channel furnace with various channel design

    Baake, E., Jakovičs, A., Pavlovs, S. & Kirpo, M., Sept 2010, In: Magnetohydrodynamics. 4, p. 461-474 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  23. Published

    Numerical modelling of free surface dynamics of conductive melt in the induction crucible furnace

    Spitans, S., Jakovičs, A., Baake, E. & Nacke, B., Sept 2010, In: Magnetohydrodynamics. 4, p. 425-436 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  24. Published

    CO 2-Reduktion durch effiziente elektrothermische Prozesstechnik

    Baake, E., Mar 2010, Elektrowärme international (EWI), 1, p. 25-32 8 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  25. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 5: Konduktive Erwärmung

    Baake, E., Mar 2010, In: Elektrowärme international (EWI). 68, 1, p. 51-53 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  26. Published

    CO2-Reduktion durch effiziente elektrothermische Prozesstechnik

    Baake, E., 1 Jan 2010, In: Elektrowärme international (EWI). 2010, 1, p. 25-32 8 p.

    Research output: Contribution to journal › Article › Research

  27. Published

    3D Electromagnetic and Thermal Modelling of the EFG Process for Silicon Tube Growth

    Nacke, B. & Wipprecht, S., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 29-34

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  28. Published

    Application of optimal control theory for optimization of metal hot forming lines with induction pre-heating

    Nacke, B., Nikanorov, A., Pleshivtseva, Y., Rapoport, E., Afinogentov, A. & Shemyakin, Y., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 557-564

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  29. Published

    Beitrag zur Berechnung der freien Oberfläche von Flüssigmetallströmungen im elektromagnetischen Feld

    Pesteanu, O., Baake, E. & Nacke, B., 2010, In: Elektrowärme international (EWI). 2010, 2, p. 127-130

    Research output: Contribution to journal › Article › Research

  30. Published

    Development of induction reheating process for a variable warm forging process chain

    Mach, M., Baake, E., Neumeyer, J., Walther, T. & Köhler, D., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 531-539

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  31. Published

    Die Multicell VOF Methode zur Berechnung der freien Oberflächen levitierter Flüssigmetallströmungen im elektromagnetischem Feld

    Pesteanu, O., Baake, E. & Nacke, B., 2010, Workshop Elektroprozesstechnik: 23. - 24. September 2010, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  32. Published

    Efficient heating by electromagnetic sources in metallurgical processes: recent applications and development trends

    Baake, E. & Nacke, B., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. XXIII-XXX

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  33. Published

    Einleitung

    Pfeifer, H. & Nacke, B., 2010, Praxishandbuch Thermoprozesstechnik: Grundlagen - Prozesse - Verfahren. 2. Aufl. ed. Essen, Vol. 1. p. 2-29

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  34. Published

    Electromagnetically induced segregation for generation of a gradient microstructure in aluminium castings

    Aguilar, J., Gruneberg, C., Sommer, B., Niehues, J., Hairmerl, M., Nacke, B. & Langejurgen, M., 2010, In: Foundry Trade Journal. 184, 3672, p. 54-58 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  35. Published

    Elektrothermische Verfahren

    Nacke, B. & Baake, E., 2010, Praxishandbuch Thermoprozesstechnik: Grundlagen - Prozesse - Verfahren. 2. Aufl. ed. Essen, Vol. 1. p. 252-329

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  36. Published

    Energetic optimization! What does it really stand for?

    Beneke, F. & Baake, E., 2010, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 8, 1, p. 1

    Research output: Contribution to journal › Article › Research

  37. Published

    Energiebilanz von Industrieöfen Energieeffizienz

    Baake, E. & Pfeifer, H., 2010, Praxishandbuch Thermoprozesstechnik: Grundlagen - Prozesse - Verfahren. 2. Aufl. ed. Essen, Vol. 1. p. 332-378

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  38. Published

    Energy efficiency in thermo processing plants

    Beneke, F. & Baake, E., 2010, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 8, 1, p. 23-29

    Research output: Contribution to journal › Article › Research

  39. Published

    Homogenization of Alloying Particles in Induction Crucible Furnaces

    Nacke, B., Scepanskis, M. & Jakovics, A., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 259-266

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  40. Published

    Homogenization of Non-Conductive particles in em induced metal flow in a cylindrical vessel

    Ščepanskis, M., Jakovičs, A. & Nacke, B., 2010, In: Magnetohydrodynamics. 46, 4, p. 413-423 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  41. Published

    Improvement of the Welding Process for High Strength Steels by Assistance of Induction Heat Treatment

    Mach, M., Schülbe, H. & Nacke, B., 2010, Tools and technologies for the processing of ultra high strength steels: IDDRG conference proceedings, 50th anniversary conference, 2010 May 31 - June 02, Graz, Austria. Graz, p. 861-870

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  42. Published

    Induction Heating for Aluminium Extrusion Process: Concepts, Simulation, Design

    Nacke, B., Zlobina, M., Galunin, S., Blinov, K. & Nikanorov, A., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 103-108

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  43. Published

    Influence of the channel design on the heat and mass exchange of the induction channel furnace

    Baake, E., Jakovics, A. & Kirpo, M., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 155-162

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  44. Published

    Influence of ultrasonic treatment on crystal growth from melt

    Nacke, B., Ubbenjans, B., Frank-Rotsch, C., Virbulis, J. & Rudolph, P., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 79-84

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  45. Published

    Interdisciplinary solutions for innovative heat processing technologies

    Baake, E. & Nacke, B., 2010, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 8, 4, p. 305

    Research output: Contribution to journal › Article › Research

  46. Published

    Methods to control the temperature profile in transverse flux induction heating

    Zlobina, M., Nacke, B. & Nikanorov, A., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 465-472

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  47. Published

    Numerical analysis of the influence of ultrasonic vibration on crystallization processes

    Ubbenjans, B., Frank-Rotsch, C., Virbulis, J., Nacke, B. & Rudolph, P., 2010, The 16th International Conference on Crystal Growth (ICCG16): the 14th International Conference on Vapor Growth and Epitaxy (ICVGE14) ; Beijing, China, 8 - 13 August 2010. Amsterdam: Elsevier

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  48. Published

    Numerical Analysis of Turbulent Flows and Temperature Field in Induction Channel Furnace with Various Channel Design

    Baake, E., Jakovics, A., Pavlovs, S. & Kirpo, M., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 253-258

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  49. Published

    Numerical Investigation of Transverse-Flux Induction Heating of Ferromagnetic Strip

    Nacke, B., Jestremski, M., Schülbe, H. & Nikanorov, A., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 189-194

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  50. Published

    Numerical Modelling of Free Surface Dynamics of Melt in Induction Crucible Furnace (ICF)

    Nacke, B., Jakovics, A., Spitans, S. & Baake, E., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 247-252

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  51. Published

    Numerical Optimization as an Effective Approach to Modern Design of Induction Heating Installations

    Galunin, S., Zlobina, M., Blinov, K., Nikanorov, A. & Nacke, B., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 201-206

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  52. Published

    Numerical simulation and investigation of induction through-heaters in dynamic operation modes

    Nacke, B., Blinov, K., Nikanorov, A. & Klöpzig, M., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 473-482

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  53. Published

    Numerical simulation of electromagnetic stirring in continuous casting of wires

    Baake, E., Turewicz, P. & Umbrashko, A., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 27-34

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  54. Published

    Numerical simulation of induction assisted hybrid welding processes

    Nacke, B., Mach, M. & Neumeyer, J., 2010, Proceedings of the 6th International Scientific Colloquium Modelling for Material Processing: Riga, September 16 - 17, 2010 ; MMP. Riga, p. 97-102

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  55. Published

    Numerical studies of the melting process in the induction furnace with cold crucible

    Umbrashko, A., Baake, E., Nacke, B. & Jakovics, A., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 277-284

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  56. Published

    Numerische Modellierung, Analyse und Design von induktiven Systemen für das Randschichthärten komplexer Werkstückgeometrien

    Nacke, B., Zedler, T. & Nikanorov, A., 2010, In: Elektrowärme international (EWI). 2010, 3, p. 127-131

    Research output: Contribution to journal › Article › Research

  57. Published

    Numerische Simulation des elektromagnetischen Rührens beim Drahtgießen

    Baake, E., Turewicz, P. & Umbrashko, A., 2010, Workshop Elektroprozesstechnik: 23. - 24. September 2010, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  58. Published

    Optimal design and control of induction heaters for forging industry

    Pleshivtseva, Y., Efimov, A., Rapoport, E., Nacke, B. & Nikanorov, A., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 251-258

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  59. Published

    Optimized induction heating in planetary reactors for semiconductor industry

    Nacke, B., Nikanorov, A. & Zedler, T., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 713-718

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  60. Published

    Potentials of Induction heating Used in Industrial Applications for HSS-Material

    Nacke, B. & Schülbe, H., 2010, Tools and technologies for the processing of ultra high strength steels: IDDRG conference proceedings, 50th anniversary conference, 2010 May 31 - June 02, Graz, Austria. Graz, p. 141-150

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  61. Published

    Principles of Heating Processes: Edition 15: Electron beam heating

    Baake, E., 2010, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 8, 3, p. 268-269

    Research output: Contribution to journal › Article › Research

  62. Published

    Reduction of CO2-emission using efficient melting and heating technologies

    Baake, E. & Nacke, B., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 263-270

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  63. Published

    Study of direct solidification technology of multicrystalline silicon in cold crucible

    Nacke, B., Kichigin, V., Niemann, B., Pechenkov, A. & Pozniak, I., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 249-256

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  64. Published

    The simulation of the behavior of alloying admixture particles in the induction crucible furnace

    Nacke, B., Scepanskis, M., Jakovics, A. & Baake, E., 2010, Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources ; Padua, May 18 - 21, 2010. Padova, p. 3-10

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  65. 2009

  66. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 4: Induktives Schmelzen

    Baake, E., Dec 2009, In: Elektrowärme international (EWI). 67, 4, p. 279-281 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  67. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 3: Induktives Härten

    Baake, E., Sept 2009, In: Elektrowärme international (EWI). 67, 3, p. 207-209 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  68. Published

    Improvement in the induction hardening of gears through optimized field guide elements

    Ulferts, A. & Nacke, B., Sept 2009, In: Elektrowärme international (EWI). 3, p. 199-202 4 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  69. Published

    Numerical simulation and analysis of heat and mass transfer processes in metallurgical induction applications

    Baake, E., Umbrashko, A. & Jakovics, A., 21 Jul 2009, IEEE EUROCON 2009, EUROCON 2009. p. 1578-1583 6 p. 5167852. (IEEE EUROCON 2009, EUROCON 2009).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  70. Published

    Recent research at the institute of electrotechnology in the field of electromagnetic processing of materials

    Nacke, B., 21 Jul 2009, IEEE EUROCON 2009. p. 1591-1597 7 p. (IEEE EUROCON 2009, EUROCON 2009).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  71. Published

    Three-dimensional transient modeling of the melt flow in a TMF VCz system for GaAs crystal growth

    Nacke, B., Kasjanow, H., Krause, A., Muizňieks, A., Kiessling, F. M., Rehse, U. & Rudolph, P., Jul 2009, In: Magnetohydrodynamics. 45, 3, p. 317-324 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  72. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 6: Infraroterwärmung

    Baake, E., Jun 2009, In: Elektrowärme international (EWI). 68, 2, p. 133-135 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  73. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 1: Induktive Erwärmung

    Baake, E., Mar 2009, Elektrowärme international (EWI), 67, 1, p. 49-51 3 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  74. Published

    Numerische Simulation der instationären Schmelzenströmung und Temperaturverteilung im Induktions-Rinnenofen

    Baake, E. & Langejürgen, M., Mar 2009, In: Elektrowärme international (EWI). 67, 1, p. 35-40 6 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  75. Published

    Verbesserte metallurgische Prozesse durch moderne Simulationstechnik

    Odenthal, H. J., Rexroth, C. H., Sommerfeld, M., Ludwig, A., Baake, E. & Thess, A., 15 Feb 2009, In: Stahl und Eisen. 129, 2, p. 37-46 10 p.

    Research output: Contribution to journal › Article › Research

  76. Published

    Analiza procesów topienia i odlewania aluminidków tytanu w próżniowym piecu indukcyjnym z tyglem miedzianym chłodzonym wodą

    Jarczyk, G., Baake, E., Umbrashko, A., Fellmann, H. & Tiefers, R., 2009, In: Inżynieria Materiałowa. 30, 5, p. 411-413

    Research output: Contribution to journal › Article › Research

  77. Published

    Analysis and optimization of the heat and mass exchange in industrial induction channel furnaces using numerical modelling

    Baake, E., Langejürgen, M., Kirpo, M. & Jakovics, A., 2009, 6th International Conference on Electromagnetic Processing of Materials: October 19 - 23, 2009, Dresden, Germany. Dresden, p. 529-532

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  78. Published

    Analysis of transient heat and mass transfer processes in the melt of induction channel furnaces using LES

    Baake, E., Kirpo, M., Jakovičs, A. & Langejuergen, J., 2009, In: Magnetohydrodynamics. 45, 3, p. 385-391 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  79. Published

    Diffusion limited growth-up of channels of ICF and its influence on integral flow through the channel

    Frishfelds, V., Jakovičs, A., Nacke, B. & Baake, E., 2009, In: Magnetohydrodynamics. 4, p. 613-621 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  80. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 2: Plasmaerwärmung

    Baake, E., 2009, In: Elektrowärme international (EWI). 67, 2, p. 133-135 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  81. Published

    Induktionshärten von Schneckenwellen II

    Zedler, T., Sievers, B., Nacke, B. & Predki, W., 2009, Vorträge anlässlich der FVA-Informationstagung 01./02. Dezember 2009. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  82. Published

    LES investigation of heat and mass exchange in channel induction furnaces

    Kirpo, M., Jakovics, A., Baake, E. & Langejürgen, M., 2009, Turbulence, heat and mass transfer 6: proceedings of the Sixth International Symposium on Turbulence, Heat and Mass Transfer Rome, Italy, 14 - 18 September, 2009. New York: Begell House Inc., p. 1023-1026

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  83. Published

    LES study of particle transport in turbulent recirculated liquid metal flows

    Kirpo, M., Jakovičs, A., Baake, E. & Nacke, B., 2009, In: Magnetohydrodynamics. 3, p. 439-450 12 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 3 4 5 6 7 8 ...10 Next