Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Electrothermic Process Engineering

Organisational unit: Institute

Type of address: Visitor addres
Wilhelm-Busch-Straße 4
30167
Hannover
501 - 777 out of 777Page size: 500
Order:

Publications

  1. 2007

  2. Published

    Simulation of the melting process of Zro2-Sio2 in an inductor crucible

    Frishfelds, V., Jakovičs, A. & Nacke, B., 2007, In: Magnetohydrodynamics. 43, 2, p. 213-220 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Square-shaped silicon crystal rod growth by the FZ method with special 3D shaped HF inductors

    Muižnieks, A., Rudevičs, A., Lacis, K., Riemann, H., Ludge, A., Schulze, F. W. & Nacke, B., 2007, In: Magnetohydrodynamics. 43, 2, p. 269-282 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  4. Published

    Three dimensional coupled simulation of the induction heated EFG crystallization process

    Kasjanow, H., Nikanorov, A., Nacke, B., Behnken, H., Franke, D. & Seidl, A., 2007, In: Magnetohydrodynamics. 43, 2, p. 261-268 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  5. 2006

  6. Published

    Modeling of the turbulent flow in induction furnaces

    Umbrashko, A., Baake, E., Nacke, B. & Jakovics, A., Oct 2006, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 37, 5, p. 831-838 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  7. Published

    Analysis of Experimental and Simulation Data for Liquid Metal Flow in a Cylindrical Container

    Kirpo, M., Jakovics, A., Baake, E. & Nacke, B., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga, p. 36-41

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  8. Published

    Application of magnetic fields in industrial growth of silicon single crystals

    von Ammon, W., Gelfgat, Y., Gorbunov, L., Muižnieks, A., Makarov, Y., Virbulis, J., Müller, G. & Mühlbauer, A., 2006, In: Magnetohydrodynamics. 42, 4, p. 427-444 18 p.

    Research output: Contribution to journal › Article › Research › peer review

  9. Published

    Bericht vom 4th International Scientific Colloquium “Modelling for Material Processing”

    Jakovics, A. & Baake, E., 2006, In: Elektrowärme international (EWI). 64, 3, p. 184-187

    Research output: Contribution to journal › Article › Research

  10. Published

    Einleitung

    Baake, E., 2006, Rinnenöfen zum Speichern und Gießen. Düsseldorf

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  11. Published

    Electromagnetic Induced Segregation of Cast Parts (EIS)

    Langejürgen, M., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  12. Published

    Elektromagnetisches Zweifrequenzventil für Flüssigmetalle

    Pesteanu, O., Baake, E. & Nacke, B., 2006, Information technology and electrical engineering - devices and systems, materials and technologies for the future: 51. IWK, Internationales Wissenschaftliches Kolloquium ; proceedings ; 11 - 15 September 2006. Ilmenau, p. 495-496

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  13. Published

    Improvement of the cold crucible melting process using LES modelling

    Umbrashko, A., Baake, E., Nacke, B. & Jakovics, A., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga, p. 23-26

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  14. Published

    Induction heating gradient effect for multi-layer material processing

    Nikanorov, A., Schülbe, H., Baake, E., Mergen, R. & Eberhard, A., 2006, The 5th International Symposium on Electromagnetic Processing of Materials, EPM 2006: October 23 - 27, 2006, Sendai International Center, Japan. Tokyo, p. 513-517

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  15. Published

    Induction Skull Melting of Oxides and Glasses in Cold Crucible

    Nacke, B., Kudryash, M., Behrens, T., Niemann, B., Lopukh, D., Martynov, A. & Chepluk, S., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  16. Published

    Induktives Härten von Getriebeschnecken

    Wrona, E., Nacke, B. & Rhode, A., 2006, In: Elektrowärme international (EWI). 64, 2, p. 153-156

    Research output: Contribution to journal › Article › Research

  17. Published

    Induktives Härten von Getriebeschnecken

    Wrona, E., Nacke, B. & Rhode, A., 2006, In: Elektrowärme international (EWI). 3, p. 153-156 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  18. Published

    Influence of HF EM Forces and Marangoni Forces on the Melt Flow During FZ Silicon Crystal Growth

    Dadzis, K., Muiznieks, A., Ratnieks, G., Riemann, H. & Lüdtke, A., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  19. Published

    Laserstrahlschweißen mit prozessintegrierter induktiver Wärmebehandlung

    Schülbe, H., Meier, O., Nikanorov, A. & Nacke, B., 2006, In: Elektrowärme international (EWI). 64, 1, p. 44-47 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  20. Published

    LES-Modeling of turbulent flows, heat and mass transfer in industrial induction applications

    Baake, E., Umbrashko, A., Behrens, H. & Jakovics, A., 2006, The 5th International Symposium on Electromagnetic Processing of Materials, EPM 2006: October 23 - 27, 2006, Sendai International Center, Japan. Tokyo, p. 214-219

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  21. Published

    LES modelling of recirculated flows in crucible furnaces

    Kirpo, M., Jakovics, A., Baake, E. & Nacke, B., 2006, Turbulence, heat and mass transfer 5: proceedings of the Fifth International Symposium on Turbulence, Heat and Mass Transfer, Dubrovnik, Croatia, 25 - 29 September, 2006. New York: Begell House Inc., p. 797-800

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  22. Published

    LES study of flow characteristics in induction furnaces

    Baake, E., Jakovics, A. & Kirpo, M., 2006, The 5th International Symposium on Electromagnetic Processing of Materials, EPM 2006: October 23 - 27, 2006, Sendai International Center, Japan. Tokyo, p. 541-546

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  23. Published

    Modeling of the turbulent melt flow in metallurgical processes

    Baake, E., Umbrashko, A. & Jakovics, A., 2006, Information technology and electrical engineering - devices and systems, materials and technologies for the future: 51. IWK, Internationales Wissenschaftliches Kolloquium ; proceedings ; 11 - 15 September 2006. Ilmenau, p. 461-462

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  24. Published

    Modeling velocity pulsations in a turbulent recirculated melt flow

    Kirpo, M., Jakovics, A., Baake, E. & Nacke, B., 2006, In: Magnetohydrodynamics. 42, 2-3, p. 207-218 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  25. Published

    Modelling of using of magnetic fields in industrial single silicon crystal growth

    Nacke, B., Muiznieks, A., Lacis, K., Krauze, A. & Rudevičs, A., 2006, The 5th International Symposium on Electromagnetic Processing of Materials, EPM 2006: October 23 - 27, 2006, Sendai International Center, Japan. Tokyo, p. 155-159

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  26. Published

    Modelling velocity pulsations in turbulent recirculated melt flow

    Kirpo, M., Jakovics, A., Baake, E. & Nacke, B., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga, p. 171-174

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  27. Published

    Numerical and Experimental Investigations of High Flexible Transverse Flux Heating Systems

    Pesteanu, O., Baake, E. & Nacke, B., 2006, Information technology and electrical engineering - devices and systems, materials and technologies for the future: 51. IWK, Internationales Wissenschaftliches Kolloquium ; proceedings ; 11 - 15 September 2006. Ilmenau, p. 493-494

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  28. Published

    Numerical Modeling of 2D Axisymmetric Flow under the influence of AC or DC EM Fields for Industrial CZ Single-Crystal Silicon Growth facilities

    Krauze, A., Muiznieks, A., Gorbunov, L., Pedchenko, A. & Sattler, A., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  29. Published

    Numerical modelling of recirculated liquid metals flows in practical applications

    Umbrashko, A., Baake, E., Nacke, B. & Jakovics, A., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga, p. 56-61

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  30. Published

    Ofenaufbau und -auslegung

    Baake, E., 2006, Rinnenöfen zum Speichern und Gießen. Düsseldorf

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  31. Published

    Principles of Heating Processes: Edition 3: Induction Melting

    Baake, E., 2006, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 4, 3, p. 225-226

    Research output: Contribution to journal › Article › Research

  32. Published

    Principles of Heating Processes: Edition 1: Induction Heating

    Baake, E., 2006, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 4, 1, p. 65-66

    Research output: Contribution to journal › Article › Research

  33. Published

    Simulation of Melting Process in cold and inductor crucible

    Jakovics, A., Javaitis, I., Nacke, B. & Baake, E., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga, p. 15-18

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  34. Published

    Skull Melting Technology for Oxides and Glasses

    Nacke, B., Behrens, T., Kudryash, M. & Jakovics, A., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  35. Published

    Stability Conditions in Inductive Melting of Oxides in Inductor-Crucible Furnace

    Nacke, B., Frishfelds, V. & Jakovics, A., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  36. Published

    Three Dimensional Coupled Simulation of Induction Heated EFG Crystallisation Process

    Kasjanow, H., Nikanorov, A., Nacke, B., Behnken, H., Franke, D. & Seidl, A., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga, p. 95-100

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  37. Published

    Transient Modeling of FZ Crystal Growth Process and Automatic Adjusting of the HF Inductor current and feed rod velocity

    Rudevičs, A., Muiznieks, A. & Ratnieks, G., 2006, Proceedings of the 4th International Scientific Colloquium Modelling for Material Processing: Riga, June 8 - 9, 2006. Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  38. 2005

  39. Published

    Experimental investigations and numerical modelling of the melting process in the cold crucible

    Umbrashko, A., Baake, E., Nacke, B. & Jakovics, A., 1 Mar 2005, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 24, 1, p. 314-323 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  40. Published

    Numerical study and comparisons with experimental data for transient behaviour of phase boundaries during industrial FZ process for silicon crystal growth

    Rudevics, A., Muiznieks, A., Riemann, H., Luedge, A., Ratnieks, G. & Von Ammon, W., 15 Feb 2005, In: Journal of crystal growth. 275, 1-2, p. e561-e565

    Research output: Contribution to journal › Conference article › Research › peer review

  41. Published

    Auslegung von Härteprozessen für komplexe Werkstückgeometrien mittels 3D-Simulation

    Nacke, B. & Wrona, E., 2005, Workshop Elektroprozesstechnik - Behandlung von Werkstoffen im Elektromagnetischen Feld: 22. - 23. Sept. 2005, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau, 2

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  42. Published

    Characteristics of velocity pulsations in a turbulent recirculated melt flow

    Kirpo, M., Jakovičs, A. & Baake, E., 2005, In: Magnetohydrodynamics. 41, 2, p. 199-210 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  43. Published

    Design of complex induction hardening problems by means of numerical simulation

    Nacke, B. & Wrona, E., 2005, In: Archives of Electrical Engineering. 54, 4, p. 461-466 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  44. Published

    Elektromagnetisch induzierte Seigerung von Gussbauteilen

    Nacke, B. & Langejürgen, M., 2005, Workshop Elektroprozesstechnik - Behandlung von Werkstoffen im Elektromagnetischen Feld: 22. - 23. Sept. 2005, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau, 8

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  45. Published

    Elektromagnetisch induzierte Seigerung von Gussbauteilen

    Nacke, B. & Langejürgen, M., 2005, In: Elektrowärme international (EWI). 2005, 4, p. 181-184

    Research output: Contribution to journal › Article › Research

  46. Published

    Induction skull melting of oxides and glasses

    Kudryash, M., Behrens, T. & Nacke, B., 2005, In: Archives of Electrical Engineering. 54, 214, p. 417-423 7 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  47. Published

    Innovative Anwendungen der Induktionserwärmung

    Nacke, B., 2005, Behandlungstechnologien für bergbaubeeinflusste Wässer/GIS - geowissenschaftliche Anwendungen und Entwicklungen: Proceedingsband zu den Workshops am Geologischen Institut der TU Bergakademie Freiberg am 17. Juni 2005 [im Rahmen des 56. Berg- und Hüttenmännischen Tags]. Freiberg

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  48. Published

    Neue Marktchancen durch innovativen Stromeinsatz im Prozesswärmebereich

    Baake, E., 2005, In: Elektrowärme international (EWI). 63, 1, p. 14-19

    Research output: Contribution to journal › Article › Research

  49. Published

    Numerical modelling of metallurgical processes using les

    Baake, E., Umbrashko, A. & Jakovics, A., 2005, In: Archives of Electrical Engineering. 54, 214, p. 425-437 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  50. 2004

  51. Published

    Numerical 2D modelling of turbulent melt flow in CZ system with dynamic magnetic fields

    Krauze, A., Muiznieks, A., Mühlbauer, A., Wetzel, T., Gorbunov, L., Pedchenko, A. & Virbulis, J., 15 May 2004, In: Journal of crystal growth. 266, 1-3, p. 40-47 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  52. Published

    Numerical study of transient behaviour of molten zone during industrial FZ process for large silicon crystal growth

    Rudevičs, A., Muižnieks, A., Ratnieks, G., Mühlbauer, A. & Wetzel, T., 15 May 2004, In: Journal of crystal growth. 266, 1-3, p. 54-59 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  53. Published

    Prediction of the growth interface shape in industrial 300 mm CZ Si crystal growth

    Wetzel, T., Virbulis, J., Muiznieks, A., Von Ammon, W., Tomzig, E., Raming, G. & Weber, M., 15 May 2004, In: Journal of crystal growth. 266, 1-3, p. 34-39 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  54. Published

    Simplified Monte Carlo simulations of point defects during industrial silicon crystal growth

    Muiznieks, A., Madzulis, I., Dadzis, K., Lacis, K. & Wetzel, T., 15 May 2004, In: Journal of crystal growth. 266, 1-3, p. 117-125 9 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  55. Published

    Numerical 3D modelling of turbulent melt flow in a large CZ system with horizontal DC magnetic field. II. Comparison with measurements

    Krauze, A., Muižnieks, A., Mühlbauer, A., Wetzel, T., Tomzig, E., Gorbunov, L., Pedchenko, A. & Virbulis, J., 15 Apr 2004, In: Journal of crystal growth. 265, 1-2, p. 14-27 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  56. Published

    Numerical 3D modelling of turbulent melt flow in large CZ system with horizontal DC magnetic field - I: Flow structure analysis

    Krauze, A., Muižnieks, A., Mühlbauer, A., Wetzel, T. & Ammon, W. V., 15 Feb 2004, In: Journal of crystal growth. 262, 1-4, p. 157-167 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  57. Published

    Experimental investigations and numerical modelling of the melting process in the cold crucible

    Umbrashko, A., Baake, E., Nacke, B. & Jakovics, A., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 31-38 A - 3

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  58. Published

    Flexible Anlagen zur Erwärmung dünner Bänder im induktiven Querfeld

    Schülbe, H., Nacke, B. & Nikanorov, A., 2004, Elektrowärme international (EWI), 2, p. 69-73 5 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  59. Published

    Flexible transverse flux heaters of metal strip

    Schülbe, H., Nikanorov, A. & Nacke, B., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 293-300 E - 4

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  60. Published

    From expert solution to optimal design of electrothermal installations

    Nikanorov, A., Schülbe, H. & Galunin, S., 2004, Elektrowärme international (EWI), 4, p. 177-178 2 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  61. Published

    High flexible transverse flux heating of metal strip

    Schülbe, H., Nikanorov, A. & Nacke, B., 2004, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2, 1

    Research output: Contribution to journal › Article › Research

  62. Published

    Induction melting of glass in cold crucible with bottom pouring

    Lopukh, D., Pechenkov, A., Loginov, I., Pozniak, I., Polevodov, B. & Nacke, B., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 25-30 A - 2

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  63. Published

    Induction skull melting of YBCO and Zr02 in a cold crucible

    Nacke, B., Behrens, T., Kudryash, M., Blinov, Y., Lopuch, D. & Pechenkov, A., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 431-438 A - 3

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  64. Published

    Induktive Skull-Melting-Technologie für Oxide und Gläser

    Behrens, T., Kudryash, M. & Nacke, B., 2004, In: Elektrowärme international (EWI). 2004, 4, p. 161-166

    Research output: Contribution to journal › Article › Research

  65. Published

    Induktives Schwebeschmelzen mit zwei Frequenzen

    Pesteanu, O., Baake, E. & Nacke, B., 2004, Workshop Elektroprozesstechnik: Erwärmen und Schmelzen : mit elektrothermischen und alternativen Verfahren ; 23. - 24.Sept. 2004, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, Ortsteil Heyda. Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  66. Published

    Non-linear effects in transverse flux heating systems

    Nikanorov, A., Schülbe, H., Nacke, B., Zlobina, M., Galunin, S. & Blinov, Y., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 685-692 L - 2

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  67. Published

    Numerical modelling and automatic optimization in designing the induction systems

    Nikanorov, A., Schülbe, H. & Nacke, B., 2004, Workshop Elektroprozesstechnik: Erwärmen und Schmelzen : mit elektrothermischen und alternativen Verfahren ; 23. - 24.Sept. 2004, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, Ortsteil Heyda. Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  68. Published

    Numerical optimisation in design of induction heating systems

    Galunin, S., Zlobina, M., Blinov, Y., Nacke, B., Nikanorov, A. & Schülbe, H., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 457-464 H - 1

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  69. Published

    Optimal control of induction through heating for forging

    Pleshivtseva, Y., Efimov, A., Rapoport, E., Nacke, B., Nikanorov, A., Galunin, S. & Blinov, Y., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 97-104 AB - 9

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  70. Published

    Schmelzen von Oxiden mit der Skull-Melting-Methode

    Nacke, B., Behrens, T. & Kudryash, M., 2004, Workshop Elektroprozesstechnik: Erwärmen und Schmelzen : mit elektrothermischen und alternativen Verfahren ; 23. - 24.Sept. 2004, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, Ortsteil Heyda. Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  71. Published

    Schwebeschmelzen und Durchflussregelung mit magnetischen Zweifrequenzfeldern

    Peşteanu, O., Baake, E. & Nacke, B., 2004, Elektrowärme international (EWI), 2, p. 85-86 2 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  72. Published

    Short historical overview of induction heating and melting

    Mühlbauer, A., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 1-13

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  73. Published

    Simulation der Schmelzdynamik von Oxiden im Induktor-Schmelztiegel

    Jakovics, A., Frishfelds, V., Nacke, B. & Behrens, T., 2004, Workshop Elektroprozesstechnik: Erwärmen und Schmelzen : mit elektrothermischen und alternativen Verfahren ; 23. - 24.Sept. 2004, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, Ortsteil Heyda. Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  74. Published

    Solving complex induction hardening tasks by numerical methods

    Wrona, E., Nacke, B. & Schwenk, W., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 593-598 I - 4

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  75. Published

    State of the art of numerical modelling of industrial silicon single crystal CZ and FZ growth

    Muiznieks, A., Krauze, A., Rudevičs, A., Lacis, K., Ratnieks, G. & Nacke, B., 2004, Induction, dielectric, conduction and electromagnetic processing: International Symposium on Heating by Electromagnetic Sources, Padua, June 22 - 25, 2004. Padua, p. 423-430 G - 1

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  76. 2003

  77. Published

    Experimental and numerical investigations of the temperature field and melt flow in the induction furnace with cold crucible

    Baake, E., Nacke, B., Bernier, F., Vogt, M., Mühlbauer, A. & Blum, M., 1 Mar 2003, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 22, 1, p. 88-97 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  78. Published

    Mathematical modelling of the industrial growth of large silicon crystals by CZ And FZ process

    Mühlbauer, A., Muiznieks, A., Ratnieks, G., Krauze, A., Raming, G. & Wetzel, T., 1 Mar 2003, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 22, 1, p. 158-169 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  79. Published

    TFH - Transverse flux induction heating of non-ferrous and precious metal strips: results of a EU research project

    Dughiero, F., Lupi, S., Mühlbauer, A. & Nikanorov, A., 1 Mar 2003, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 22, 1, p. 134-148 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  80. Published

    Turbulent flow dynamics, heat transfer and mass exchange in the melt of induction furnaces

    Baake, E., Nacke, B., Umbrashko, A. & Jakovics, A., 1 Mar 2003, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 22, 1, p. 39-47 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  81. Published

    Using of EM fields during industrial CZ and FZ large silicon crystal growth

    Mühlbauer, A., Muiznieks, A., Ratnieks, G., Krauze, A., Raming, G. & Wetzel, T., 1 Mar 2003, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 22, 1, p. 123-133 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  82. Published

    3D-Modellierung zur Auslegung komplexer induktiver Härteaufgaben

    Wrona, E. & Nacke, B., 2003, Informations- und Elektrotechnik: Werkstoffe, Bauelemente, Systeme und Technologien für die Zukunft. Ilmenau, p. 526-527

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  83. Published

    3D-Modelling of the Transient Heating Process for Induction Surface Hardening

    Wrona, E., Nacke, B. & Resetov, D., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 119-123

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  84. Published

    75 Jahre Institut für Elektrowärme der Universität Hannover

    Mühlbauer, A., 2003, In: Elektrowärme international (EWI). 61, 4, p. 176-185

    Research output: Contribution to journal › Article › Research

  85. Published

    Bericht vom International Scientific Colloquium „Modelling for Electromagnetic Processing“ in Hannover

    Baake, E. & Jakovics, A., 2003, In: Elektrowärme international (EWI). 61, 2, p. 71-74

    Research output: Contribution to journal › Article › Research

  86. Published

    Development and investigation of flexible transverse flux heaters

    Schülbe, H., Nikanorov, A. & Nacke, B., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 45-50

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  87. Published

    Electrodynamic forces in steel strip during induction heating

    Kasjanow, H., Schülbe, H. & Nikanorov, A., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 337-342

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  88. Published

    Energetische und wirtschaftliche Einsparpotenziale bei Elektroprozessverfahren

    Baake, E., 2003, In: ETG-Fachberichte (Energietechnische Gesellschaft im VDE). 94, p. 187 1 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  89. Published

    Energie- und Umweltbetrachtungen beim Schmelzen im Induktionstiegelofen

    Baake, E., 2003, In: Giesserei : die Zeitschrift für Technik, Innovation und Management. 90, 6, p. 122-126

    Research output: Contribution to journal › Article › Research

  90. Published

    Experimental investigations and LES modelling of the turbulent melt flow and temperature distribution in the cold crucible induction furnace

    Baake, E., Umbrashko, A., Jakovics, A. & Nacke, B., 2003, 4th International Conference on Electromagnetic Processing of Materials: EPM 2003 ; 14 - 17 October 2003, Lyon, France ; Marcel Garnier Memorial Symposium. Lyon

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  91. Published

    Experimentelle Untersuchung und LES-Modellierung der Schmelzenströmung und Temperaturverteilung im Kaltwand-Induktions-Tiegelofen

    Baake, E., Umbrashko, A., Jakovics, A. & Nacke, B., 2003, Informations- und Elektrotechnik: Werkstoffe, Bauelemente, Systeme und Technologien für die Zukunft. Ilmenau, p. 515-516

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  92. Published

    Grundlagen elektrothermischer Verfahren: Folge 9: Plasmaerwärmung

    Baake, E., 2003, In: Elektrowärme international (EWI). 61, 1, p. 24-25

    Research output: Contribution to journal › Article › Research

  93. Published

    Grundlagen elektrothermischer Verfahren: Folge 10: Laserstrahlerwärmung

    Baake, E., 2003, In: Elektrowärme international (EWI). 61, 2, p. 90-91

    Research output: Contribution to journal › Article › Research

  94. Published

    Grundlagen elektrothermischer Verfahren: Folge 11: Elektronenstrahlerwärmung

    Baake, E., 2003, In: Elektrowärme international (EWI). 61, 3, p. 141-142

    Research output: Contribution to journal › Article › Research

  95. Published

    Induction Skull Melting of Y 2O 3-BaO-CuO in a Cold Crucible

    Baake, E., Umbrashko, A., Jakovics, A. & Nacke, B., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 249-254

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  96. Published

    Induktive Erwärmung von metallischem Flachgut

    Schülbe, H., Nikanorov, A. & Nacke, B., 2003, In: ETG-Fachberichte (Energietechnische Gesellschaft im VDE). 2003, 94, p. 199

    Research output: Contribution to journal › Article › Research

  97. Published

    Induktives Härten von Getriebeschnecken

    Wrona, E., Rhode, A., Nacke, B. & Predki, W., 2003, Forschungsvereinigung Antriebstechnik e.V: vorgelegt anlässlich der Informationstagung des Wissenschaftlichen Beirats der FVA, am 04. und 05. November 2003 in Würzburg. Frankfurt

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  98. Published

    Large Eddy simulation modeling of heat and mass transfer in turbulent recirculated flows

    Baake, E., Nacke, B., Umbrashko, A. & Jakovičs, A., 2003, In: Magnetohydrodynamics. 39, 3, p. 291-297 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  99. Published

    LES-Modelling and Experimental Investigation of the Melt Flow in Induction Furnaces

    Umbrashko, A., Baake, E., Nacke, B. & Jakovics, A., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 111-116

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  100. Published

    LES Modelling of Heat and Mass Transfer in Turbulent Recirculated Flows

    Baake, E., Nacke, B., Umbrashko, A. & Jakovics, A., 2003, Selected papers of the 5th PAMIR Conference Fundamental and Applied MHD: Ramatuelle, France, September 16 - 20, 2002. Salaspils, p. 173-178

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  101. Published

    Mathematical Modelling and Investigation of Induction System with Slitted Crucible

    Pozniak, I., Pechenkov, A., Nacke, B. & Behrens, T., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 151-156

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  102. Published

    Mathematical modelling of industrial FZ process for large

    Ratnieks, G., Muiznieks, A. & Mühlbauer, A., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 205-210

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  103. Published

    Melt flow measurement in aluminium alloys in electromagnetic stirred industrial furnace

    Baake, E., Nikanorov, A., Timofeev, V. B. & Khristinich, R., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 273-278

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  104. Published

    Modelling for Process Research and Development

    Mühlbauer, A., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 5-11

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  105. Published

    Moderne Elektroprozesstechnik

    Nacke, B., 2003, In: ETG-Fachberichte (Energietechnische Gesellschaft im VDE). 94, p. 179 1 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  106. Published

    Neue Auslegungsmöglichkeiten für das induktive Randschichthärten

    Wrona, E., Nacke, B. & Grübe, G., 2003, In: Elektrowärme international (EWI). 61, 1, p. 17-20

    Research output: Contribution to journal › Article › Research

  107. Published

    New 3D Simulation Tools for the Design of Complex Induction Hardening Problems

    Nacke, B. & Wrona, E., 2003, 4th International Conference on Electromagnetic Processing of Materials: EPM 2003 ; 14 - 17 October 2003, Lyon, France ; Marcel Garnier Memorial Symposium. Lyon

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  108. Published

    Numerical 2D modelling of turbulent melt flow in CZ system with AC magnetic fields

    Krauze, A., Muiznieks, A., Mühlbauer, A., Wetzel, T., Gorbunov, L. & Pedchenko, A., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 219-224

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  109. Published

    Numerical 3D modelling of turbulent melt flow in CZ system with horizontal DC magnetic field

    Krauze, A., Muiznieks, A., Mühlbauer, A., Wetzel, T. & Virbulis, J., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 85-90

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  110. Published

    Numerical modeling of non-linear transverse flux heating systems

    Zlobina, M., Galunin, S., Blinov, Y., Nacke, B., Nikanorov, A. & Schülbe, H., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 51-56

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  111. Published

    Numerical techniques for optimization of 3D induction heating systems

    Galunin, S., Zlobina, M., Blinov, Y., Nacke, B., Nikanorov, A. & Schülbe, H., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 163-168

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  112. Published

    Potentials of Optimal Control Techniques in Induction Through Heating for forging

    Pleshivtseva, Y., Rapoport, E., Efimov, A., Nacke, B., Nikanorov, A., Galunin, S. & Blinov, Y., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 145-150

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  113. Published

    Praxishandbuch Thermoprozess-Technik: Bd. 2: Prozesse, Komponenten, Sicherheit

    Axel, V. S. (Editor), Mühlbauer, A. (Editor) & Kramer, C. (Editor), 2003, Essen. 795 p.

    Research output: Book/Report › Anthology › Research

  114. Published

    Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003

    Nacke, B. (Editor) & Baake, E. (Editor), 2003, Hannover. 346 p.

    Research output: Book/Report › Conference proceeding › Research

  115. Published

    Simplified model for Monte Carlo simulation of point defect dynamics during industrial silicon crystal growth

    Muiznieks, A., Madzulis, I., Dadzis, K. & Mühlbauer, A., 2003, Proceedings of the International Scientific Colloquium Modelling for Electromagnetic Processing: Hannover, March 24 - 26, 2003. Hannover, p. 311-316

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  116. Published

    Simulation von Schmelzenströmungen für industrielle Anwendungen

    Jakovics, A., Baake, E. & Umbrashko, A., 2003, In: Elektrowärme international (EWI). 61, 1, p. 21-23

    Research output: Contribution to journal › Article › Research

  117. Published

    Stability conditions of the build-up formation on the surface of the refractory

    Kaupužs, J., Jakovičs, A. & Nacke, B., 2003, In: Magnetohydrodynamics. 39, 4, p. 419-426 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  118. 2002

  119. Published

    Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces

    Jakovics, A., Madzhulis, I., Frishfelds, V. & Nacke, B., Feb 2002, In: Energy conversion and management. 43, 3, p. 345-352 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  120. Published

    Analyse und Optimierung des Energiebedarfs von induktiven Schmiede-Erwärmern

    Nacke, B. & Wrona, E., 2002, In: Schmiede-Journal : Organ des Industrieverbandes Massivumformung e.V. Hagen. 2002, 3, p. 22-23

    Research output: Contribution to journal › Article › Research

  121. Published

    Entwicklung und Untersuchung flexibler Querfeld-Banderwärmer

    Nacke, B., Nikanorov, A. & Schülbe, H., 2002, Workshop Elektroprozesstechnik: Wärme- und Kraftwirkungen im elektromagnetischen Feld : induktives Erwärmen und Schmelzen, Magnetofluiddynamik, Kombinationsverfahren : 26. - 27. Sept. 2002, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, Ortsteil Heyda : Tagungsband . Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  122. Published

    Grundlagen elektrothermischer Verfahren: Folge 8: Lichtbogenerwärmung

    Baake, E., 2002, In: Elektrowärme international (EWI). 60, 4, p. 149-150

    Research output: Contribution to journal › Article › Research

  123. Published

    Grundlagen elektrothermischer Verfahren: Folge 5: Infraroterwärmung

    Baake, E., 2002, In: Elektrowärme international (EWI). 60, 1, p. 32-33

    Research output: Contribution to journal › Article › Research

  124. Published

    Grundlagen elektrothermischer Verfahren: Folge 6: Hochfrequenzerwärmung

    Baake, E., 2002, In: Elektrowärme international (EWI). 60, 2, p. 79-80

    Research output: Contribution to journal › Article › Research

  125. Published

    Grundlagen elektrothermischer Verfahren: Folge 7: Mikrowellenerwärmung

    Baake, E., 2002, In: Elektrowärme international (EWI). 60, 3, p. 112-113

    Research output: Contribution to journal › Article › Research

  126. Published

    Induktive Querfeldbanderwärmung: Durch numerische Simulation zur industriellen Anwendung

    Schülbe, H. & Nikanorov, A., 2002, In: Elektrowärme international (EWI). 2002, 2, p. 61-68

    Research output: Contribution to journal › Article › Research

  127. Published

    Intermediate induction heating in hot mills for flexible steel production

    Artuso, I., Dughiero, F., Lupi, S., Nacke, B., Nikanorov, A., Ostwaldt, D. & Schiavon, M., 2002, In: Elektrowärme international (EWI). 60, 2, p. 69-75

    Research output: Contribution to journal › Article › Research

  128. Published

    Kostenreduzierung durch betriebliches Lastmanagement in einer Gießerei

    Behrens, T. & Baake, E., 2002, In: Elektrowärme international (EWI). 60, 3, p. 96-101

    Research output: Contribution to journal › Article › Research

  129. Published

    Modellierung industrieller Prozesse zur Züchtung von Silicium-Einkristallen

    Mühlbauer, A., 2002, Workshop Elektroprozesstechnik: Wärme- und Kraftwirkungen im elektromagnetischen Feld : induktives Erwärmen und Schmelzen, Magnetofluiddynamik, Kombinationsverfahren : 26. - 27. Sept. 2002, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, Ortsteil Heyda : Tagungsband . Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  130. Published

    Modellierung industrieller Prozesse zur Züchtung von Silicium-Einkristallen

    Mühlbauer, A., 2002, In: Jahrbuch der Braunschweigischen Wissenschaftlichen Gesellschaft. 2001, p. 57-59

    Research output: Contribution to journal › Article › Research

  131. Published

    Praxishandbuch Thermoprozess-Technik: Bd. 1: Grundlagen, Verfahren

    Kramer, C. & Mühlbauer, A., 2002, Essen. 592 p.

    Research output: Book/Report › Monograph › Research

  132. 2001

  133. Published

    Numerical 3D study of FZ growth: Dependence on growth parameters and melt instability

    Ratnieks, G., Muižnieks, A., Mühlbauer, A. & Raming, G., Aug 2001, In: Journal of crystal growth. 230, 1-2, p. 48-56 9 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  134. Published

    Numerical investigation of silicon melt flow in large diameter CZ-crystal growth under the influence of steady and dynamic magnetic fields

    Virbulis, J., Wetzel, T., Muiznieks, A., Hanna, B., Dornberger, E., Tomzig, E., Mühlbauer, A. & Ammon, W. V., Aug 2001, In: Journal of crystal growth. 230, 1-2, p. 92-99 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  135. Published

    Numerical investigation of the influence of EM-fields on fluid motion and resistivity distribution during floating-zone growth of large silicon single crystals

    Raming, G., Muižnieks, A. & Mühlbauer, A., Aug 2001, In: Journal of crystal growth. 230, 1-2, p. 108-117 10 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  136. Published

    Numerical model of turbulent CZ melt flow in the presence of AC and CUSP magnetic fields and its verification in a laboratory facility

    Wetzel, T., Muiznieks, A., Mühlbauer, A., Gelfgat, Y., Gorbunov, L., Virbulis, J., Tomzig, E. & Ammon, W. V., Aug 2001, In: Journal of crystal growth. 230, 1-2, p. 81-91 11 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  137. Published

    Stress-induced dislocation generation in large FZ- and CZ-silicon single crystals - Numerical model and qualitative considerations

    Muižnieks, A., Raming, G., Mühlbauer, A., Virbulis, J., Hanna, B. & Ammon, W. V., Aug 2001, In: Journal of crystal growth. 230, 1-2, p. 305-313 9 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  138. Published

    2D and 3D Numerical Modelling of FZ Large Silicon Single Crystal Growth: Relation between Growth Process and Crystal Quality

    Mühlbauer, A., Muiznieks, A., Raming, G. & Ratnieks, G., 2001, Proceedings of the International Colloquium Modelling for Saving Resources: Riga, May 17 - 18, 2001. Riga, 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  139. Published

    Analyse und Optimierung des Energieverbrauchs von induktiven Schmiede-Erwärmern

    Nacke, B. & Wrona, E., 2001, Workshop Reihe Elektroprozesstechnik: elektromagnetische Verfahrenstechniken : induktives Erwärmen und Schmelzen, dielektrische Erwärmung, elektromagnetische Beeinflussung ; 18. - 19. Okt. 2001, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, OT Heyda. Ilmenau, 10

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  140. Published

    Bericht vom International Scientific Colloquium "Modelling for Saving Resources" in Riga, Lettland

    Jakovics, A. & Baake, E., 2001, In: Elektrowärme international (EWI). 59, 2, p. 111-113

    Research output: Contribution to journal › Article › Research

  141. Published

    Dreidimensionale instationäre Untersuchungen der turbulenten Schmelzenströmung in Induktionsöfen

    Baake, E., Nacke, B., Umbrashko, A. & Jakovics, A., 2001, Workshop Reihe Elektroprozesstechnik: elektromagnetische Verfahrenstechniken : induktives Erwärmen und Schmelzen, dielektrische Erwärmung, elektromagnetische Beeinflussung ; 18. - 19. Okt. 2001, Seminar- und Ferienhaus "Zur Talsperre" Ilmenau, OT Heyda. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  142. Published

    Effizienter Energieeinsatz in Schmiedebetrieben

    Wrona, E. & Nacke, B., 2001, In: Elektrowärme international (EWI). 59, 2, p. 65-67

    Research output: Contribution to journal › Article › Research

  143. Published

    Einsatz des Kaltwand-Induktions-Tiegelofens zum Schmelzen und Gießen von TiAl-Legierungen

    Vogt, M., 2001, Düsseldorf.

    Research output: Thesis › Doctoral thesis

  144. Published

    Forschungsprojekt "Thermophysikalische Eigenschaften metallischer und keramischer Werkstoffe"

    Trümmann, H., Nacke, B. & Storch, G., 2001, In: Elektrowärme international (EWI). 59, 4, p. 149-155

    Research output: Contribution to journal › Article › Research

  145. Published

    Grundlagen elektrothermischer Verfahren: Folge 1: Induktive Erwärmung

    Baake, E., 2001, In: Elektrowärme international (EWI). 59, 1, p. 33-34

    Research output: Contribution to journal › Article › Research

  146. Published

    Grundlagen elektrothermischer Verfahren: Folge 2: Induktives Schmelzen

    Baake, E., 2001, In: Elektrowärme international (EWI). 59, 2, p. 77-78

    Research output: Contribution to journal › Article › Research

  147. Published

    Grundlagen elektrothermischer Verfahren: Folge 4: Indirekte Widerstandserwärmung

    Baake, E., 2001, In: Elektrowärme international (EWI). 59, 4, p. 161-162

    Research output: Contribution to journal › Article › Research

  148. Published

    Grundlagen elektrothermischer Verfahren: Folge 3: Konduktive Erwärmung

    Baake, E., 2001, In: Elektrowärme international (EWI). 59, 3, p. 116-117

    Research output: Contribution to journal › Article › Research

  149. Published

    Heat and mass transfer in turbulent flows with several recirculated flow eddies

    Baake, E., Nacke, B., Jakovics, A. & Umbrashko, A., 2001, In: Magnetohydrodynamics. 37, 1-2, p. 13-22 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  150. Published

    Influence of the crystal orientation on the microscopic crystallization instabilities during FZ silicon crystal growth

    Madzulis, I., Muiznieks, A., Mühlbauer, A. & Raming, G., 2001, Modeling in crystal growth: proceedings of the Third International Workshop on Modeling in Crystal Growth, Hauppauge, New York, USA, 18 - 20 October 2000. Amsterdam: Elsevier, p. 37-38

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  151. Published

    International Seminar on Heating by Internal Sources in Padua/Italy

    Nikanorov, A. & Baake, E., 2001, In: Elektrowärme international (EWI). 59, 4, p. 159

    Research output: Contribution to journal › Article › Research

  152. Published

    Mathematical modelling of the industrial CZ crystal growth: melt hydrodynamics control by imposed magnetic fields

    Mühlbauer, A., Muiznieks, A., Wetzel, T. & Rudevičs, A., 2001, Proceedings of the International Colloquium Modelling for Saving Resources: Riga, May 17 - 18, 2001. Riga, 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  153. Published

    Measurement of the electrical conductivity of zircon at high temperatures

    Jakovics, A., Kirpo, M., Veispals, B., Nacke, B. & Baake, E., 2001, Proceedings of the International Colloquium Modelling for Saving Resources: Riga, May 17 - 18, 2001. Riga, p. 135-141

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  154. Published

    Microscopic model of crystal growth using the mean field approximation

    Madzulis, I., Muiznieks, A., Mühlbauer, A. & Krauze, A., 2001, Proceedings of the International Colloquium Modelling for Saving Resources: Riga, May 17 - 18, 2001. Riga, p. 6

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  155. Published

    Modellierung des industriellen FZ-Prozesses zur Züchtung von Silizium-Einkristallen

    Raming, G., 2001, Düsseldorf. 159 p.

    Research output: Thesis › Doctoral thesis

  156. Published

    Numerical 3D study of the rotational striations in FZ-grown crystal

    Muiznieks, A., Raming, G., Mühlbauer, A. & Ratnieks, G., 2001, Modeling in crystal growth: proceedings of the Third International Workshop on Modeling in Crystal Growth, Hauppauge, New York, USA, 18 - 20 October 2000. Amsterdam: Elsevier, p. 21-22

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  157. Published

    Numerical investigation of Si melt flow in large diameter CZ crucibles under the influence of various AC and DC fields

    Virbulis, J., Wetzel, T., Muiznieks, A., Mühlbauer, A., von Ammon, W., Dornberger, E., Tomzig, E. & Hanna, B., 2001, Modeling in crystal growth: proceedings of the Third International Workshop on Modeling in Crystal Growth, Hauppauge, New York, USA, 18 - 20 October 2000. Amsterdam: Elsevier, p. 31-32

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  158. Published

    Numerical investigation of the influence of EM-Fields on fluid motion and resistivity distribution during Floating-Zone (FZ) growth of large silicon single crystals

    Muiznieks, A., Raming, G. & Mühlbauer, A., 2001, Modeling in crystal growth: proceedings of the Third International Workshop on Modeling in Crystal Growth, Hauppauge, New York, USA, 18 - 20 October 2000. Amsterdam: Elsevier, p. 35-36

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  159. Published

    Numerical model of turbulent CZ melt flow in the presence of AC and DC fields and its verification in a laboratory facility

    Wetzel, T., Baake, E., Mühlbauer, A., Gelfgat, Y., Gorbunov, L., Virbulis, J., Tomzig, E. & von Ammon, W., 2001, Modeling in crystal growth: proceedings of the Third International Workshop on Modeling in Crystal Growth, Hauppauge, New York, USA, 18 - 20 October 2000. Amsterdam: Elsevier, p. 13-14

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  160. Published

    Optimierte Auslegung von induktiven Querfeld-Banderwärmern

    Nauvertat, G., Falter-Braun, P., Mühlbauer, A., Nacke, B. & Nikanorov, A., 2001, In: Metall. 55, 12, p. 51-55

    Research output: Contribution to journal › Article › Research

  161. Published

    Optimiertes Design industrieller induktiver Querfeld-Banderwärmungsanlagen

    Nauvertat, G., 2001, Düsseldorf. 143 p.

    Research output: Thesis › Doctoral thesis

  162. Published

    Optimierung des thermischen Verhaltens metallischer Schmelzen im Kaltwand-Induktions-Tiegelofen

    Bernier, F., 2001, Düsseldorf.

    Research output: Thesis › Doctoral thesis

  163. Published

    Rational Use of Energy in Induction Heaters for Forging Industry

    Wrona, E. & Nacke, B., 2001, Proceedings of the International Colloquium Modelling for Saving Resources: Riga, May 17 - 18, 2001. Riga, p. 153-157

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  164. Published

    Simulation of CZ single crystal growth from Si-Ge solution

    Muiznieks, A., Buligins, L., Krauze, A. & Mühlbauer, A., 2001, Proceedings of the International Colloquium Modelling for Saving Resources: Riga, May 17 - 18, 2001. Riga, 6 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  165. Published

    Stress-induced dislocation generation in large FZ- and CZ-silicon single crystals - numerical model and qualitative considerations

    Muiznieks, A., Raming, G., Mühlbauer, A., Virbulis, J., Hanna, B. & von Ammon, W., 2001, Modeling in crystal growth: proceedings of the Third International Workshop on Modeling in Crystal Growth, Hauppauge, New York, USA, 18 - 20 October 2000. Amsterdam: Elsevier, p. 33-34

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  166. Published

    Strömung und Temperaturverteilung in Tiegelinduktoröfen zum Speichern und Gießen von Gusseisen

    Baake, E., Dötsch, E. & Nacke, B., 2001, In: Elektrowärme international (EWI). 59, 1, p. 15-20

    Research output: Contribution to journal › Article › Research

  167. Published

    Transverse flux heating in modern energy saving lines for metal rolling and treatment

    Nacke, B., Behrens, T., Baake, E., Blinov, Y., Lopukh, D., Petchenkov, A., Martynov, A. & Pozniak, I., 2001, Proceedings of the International Colloquium Modelling for Saving Resources: Riga, May 17 - 18, 2001. Riga, p. 589-596

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  168. 2000

  169. Published

    Influence of the three dimensionality of the HF electromagnetic field on resistivity variations in Si single crystals during FZ growth

    Ratnieks, G., Muiznieks, A., Buligins, L., Raming, G., Mühlbauer, A., Lüdge, A. & Riemann, H., 15 Jun 2000, In: Journal of crystal growth. 216, 1, p. 204-219 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  170. Published

    Anlage

    Baake, E., 2000, Schmelzen, Speichern und Gießen von Eisengußwerkstoffen in induktiv beheizten Anlagen: Induktionstiegelofen. Düsseldorf

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  171. Published

    Einsatz numerischer Simulationswerkzeuge bei der Entwicklung elektrothermischer Anlagen und Prozesse

    Wetzel, T., Mühlbauer, A. & Nacke, B., 2000, In: Elektrowärme international (EWI). 58, 4, p. 157-163

    Research output: Contribution to journal › Article › Research

  172. Published

    Energy requirements and ways of saving energy in the production process of photovoltaic modules

    Wetzel, T., Baake, E. & Mühlbauer, A., 2000, In: International Journal of Solar Energy. 20, 3, p. 185-196 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  173. Published

    Heat and mass transfer in turbulent flows with several recirculated flow eddies

    Baake, E., Nacke, B., Jakovics, A. & Umbrashko, A., 2000, Proceedings of the Fourth International Pamir Conference on Magnetohydrodynamic at Dawn of Third Millenium: Presquile de Giens, France, September 18 - 22, 2000. Grenoble, Vol. 1. p. 71-76

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  174. Published

    Influence of melt flow and temperature on erosion of refractory and deposit formation in aluminium melting furnaces

    Jakovics, A., Nacke, B., Madzulis, I. & Frishfelds, V., 2000, Proceedings of the Fourth International Pamir Conference on Magnetohydrodynamic at Dawn of Third Millenium: Presquile de Giens, France, September 18 - 22, 2000. Grenoble, Vol. 2. p. 851-856

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  175. Published

    Ofenauslegung-Energie-Strompreisgestaltung

    Baake, E., 2000, Schmelzen, Speichern und Gießen von Eisengußwerkstoffen in induktiv beheizten Anlagen: Induktionstiegelofen. Düsseldorf

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  176. Published

    Optimierter Betrieb von Kaltwand-Induktions-Tiegelöfen zum Schmelzen von TiAl-Legierungen

    Bernier, F., Vogt, M., Mühlbauer, A. & Nacke, B., 2000, In: Elektrowärme international (EWI). 58, 4, p. 150-156

    Research output: Contribution to journal › Article › Research

  177. Published

    Optimiertes Design induktiver Querfeld-Erwärmungsanlagen

    Nauvertat, G., Nikanorov, A. & Mühlbauer, A., 2000, In: Elektrowärme international (EWI). 58, 1, p. 22-29

    Research output: Contribution to journal › Article › Research

  178. Published

    Schmelzen innovativer Werkstoffe für Hochtemperaturanwendungen im Kaltwand-Induktions-Tiegelofen

    Nacke, B., Mühlbauer, A., Bernier, F. & Vogt, M., 2000, Workshop Reihe Elektroprozesstechnik: Induktionserwärmung : 28. - 29.Sept. 2000. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  179. Published

    Stand der Technik der industriellen mittelbaren Widerstandserwärmung

    Irretier, O., Baake, E. & Geiger, R., 2000, In: Elektrowärme international (EWI). 58, 2, p. 63-72

    Research output: Contribution to journal › Article › Research

  180. Published

    Universelle Einsatzmöglichkeiten der Infrarotthermografie

    Trümmann, H. & Nacke, B., 2000, In: Elektrowärme international (EWI). 58, 3, p. 118-124

    Research output: Contribution to journal › Article › Research

  181. Published

    Verfahrenstechnische Wirkungen der Bad-Bewegung im Induktions-Tiegelofen

    Baake, E., Dötsch, E., Drees, G. W. & Nacke, B., 2000, In: Elektrowärme international (EWI). 58, 3, p. 109-117

    Research output: Contribution to journal › Article › Research

  182. Published

    Wärmeprozeßtechnik

    Baake, E., 2000, Energiever(sch)wendung: Handbuch zum rationellen Einsatz von elektrischer Energie. 1. Aufl. ed. Essen, p. 223-230

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  183. Published

    Wärme- und Stofftransport in der Schmelze von Tiegelinduktoröfen

    Baake, E., Nacke, B., Dötsch, E., Umbrashko, A. & Jakovics, A., 2000, Workshop Reihe Elektroprozesstechnik: Induktionserwärmung : 28. - 29.Sept. 2000. Ilmenau, 16 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  184. Published

    Werkzeuge zum optimierten Design induktiver Querfelderwärmer

    Nauvertat, G., Mühlbauer, A., Nacke, B. & Nikanorov, A., 2000, Workshop Reihe Elektroprozesstechnik: Induktionserwärmung : 28. - 29.Sept. 2000. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  185. 1999

  186. Published

    Power consumption of skull melting, Part I: Analytical aspects and experiments

    Gross, C., Assmus, W., Muiznieks, A., Raming, G., Mühlbauer, A. & Stenzel, C., 16 Apr 1999, In: Crystal research and technology. 34, 3, p. 319-328 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  187. Published

    Power consumption of skull melting, Part II: Numerical calculation of the shape of the molten zone and comparison with experiment

    Muiznieks, A., Raming, G., Mühlbauer, A., Gross, C., Assmus, W. & Stenzel, C., 16 Apr 1999, In: Crystal research and technology. 34, 3, p. 329-338 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  188. Published

    System of Mathematical Models for the Analysis of Industrial FZ-Si-Crystal Growth Processes

    Muiznieks, A., Raming, G. & Mühlbauer, A., 1 Apr 1999, In: Crystal research and technology. 34, 2, p. 217-226 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  189. Published

    Numerical modelling of the microscopic inhomogeneities during FZ silicon growth

    Mühlbauer, A., Muiznieks, A., Raming, G., Riemann, H. & Lüdge, A., Mar 1999, In: Journal of crystal growth. 198-199, PART I, p. 107-113 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  190. Published

    Possible use of Skull melting under microgravity

    Gross, C., Assmus, W., Muiznieks, A., Mühlbauer, A., Stenzel, C. & Schulz, O., Mar 1999, In: Journal of crystal growth. 198-199, PART I, p. 188-193 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  191. Published

    3D modelling of magnetic, temperature, hydrodynamic and dopant concentration fields during FZ silicon crystal growth

    Ratnieks, G., Muiznieks, A., Raming, G., Mühlbauer, A. & Buligins, L., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga, p. 30-35

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  192. Published

    3D numerical analysis of the influence of EM and marangoni forces on melt hydrodynamics and mass transport during FZ silicon crystal growth

    Ratnieks, G., Muiznieks, A., Buligins, L., Raming, G. & Mühlbauer, A., 1999, In: Magnetohydrodynamics. 35, 3, p. 223-236 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  193. Published

    Aktuelle Forschungsbeiträge zur EMV: Magnetische Streufelder in der Umgebung von Induktionsanlagen

    Mühlbauer, A., 1999, In: EMC-Kompendium: elektromagnetische Verträglichkeit. 1999, p. 85

    Research output: Contribution to journal › Article › Research

  194. Published

    Anwendung der induktiven Querfelderwärmung von Flachgut

    Ruhnke, A., Nauvertat, G. & Mühlbauer, A., 1999, In: Stahl und Eisen. 119, 8, p. 73-77

    Research output: Contribution to journal › Article › Research

  195. Published

    Bericht vom International Scientific Colloquium 'Modelling of Material Processing' in Riga, Lettland

    Jakovics, A. & Baake, E., 1999, In: Elektrowärme international (EWI). 57, B3, p. 141-143

    Research output: Contribution to journal › Article › Research

  196. Published

    Combined applications of thermography, heat transfer measurement and heat consumption modelling in the reconstruction of buildings

    Jakovics, A., Gendelis, S., Trümmann, H. & Virbulis, J., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga, p. 158-167

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  197. Published

    Experimental determination of turbulent flow characteristics, temperature and electromagnetic force density fields in the melt of induction furnaces

    Baake, E. & Mühlbauer, A., 1999, International Workshop on Measuring Techniques for Liquid Metal Flows (MTLM): Dresden-Rossendorf, October 11 - 13, 1999. Dresden

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  198. Published

    Heat and mass transfer in the Tubulent Melt Flow of the Crucible Inductor Furnace

    Baake, E., Mühlbauer, A. & Nacke, B., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  199. Published

    Influence of furnace arrangement on the melt flow and the thermal behaviour of the melt in an induction furnace with cold crucible

    Bernier, F. & Vogt, M., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  200. Published

    Numerical modelling of melt flow during Czochralski Silicon crystal growth

    Virbulis, J., Wetzel, T., Muiznieks, A., Raming, G., Rexer, B., Dornberger, E., von Ammon, W. & Mühlbauer, A., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga, p. 42-47

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  201. Published

    Numerical modelling of the influence of different types of magnetic fields on fluid motion and resistivity profiles during FZ silicon crystal growth

    Raming, G., Muiznieks, A. & Mühlbauer, A., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga, p. 24-29

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  202. Published

    Simplified model for microscopic instabilities of crystallization process during FZ silicon crystal growth

    Muiznieks, A., Madzulis, I., Raming, G. & Mühlbauer, A., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga, p. 60-65

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  203. Published

    Some aspects of numerical modelling of turbulent low Re melt flow during CZ silicon single crystal growth

    Krauze, A., Muiznieks, A., Wetzel, T., Raming, G., Mühlbauer, A., Buligins, L. & Virbulis, J., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga, p. 54-59

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  204. Published

    Systematische Untersuchung der induktiven Querfeld-Banderwärmung

    Ruhnke, A., 1999, Düsseldorf. 148 p.

    Research output: Thesis › Doctoral thesis

  205. Published

    Themen, Trends und Highlights auf dem Technologie-Forum International

    Baake, E. & Wetzel, T., 1999, In: Elektrowärme international (EWI). 57, B3, p. 135-140

    Research output: Contribution to journal › Article › Research

  206. Published

    Thermal deformation of the strip during transverse flux induction heating

    Ruhnke, A., Mühlbauer, A., Nikanorov, A. & Demidovitch, V., 1999, Proceedings of the International Colloquium Modelling of Material Processing: Riga, May 28 - 29, 1999 / organized by Laboratory for Mathematical Modelling of Environmental and Technological Processes, University of Latvia and Institute for Electroheat, University of Hannover . Riga, p. 210-215

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  207. Published

    Thermal deformation of the strip during transverse flux induction heating

    Ruhnke, A., Mühlbauer, A., Nikanorov, A. & Demidovitch, V., 1999, International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF'99, September 23 - 25, 1999, Pavia, Italy. Pavia, p. 525

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  208. 1998

  209. Published

    Automatische Anpaßschaltung für Mikrowellengeneratoren

    Fricke, D., 1998, 137 p.

    Research output: Thesis › Doctoral thesis

  210. Published

    Experimental confirmation of a numerical model of doping distribution for floating-zone silicon growth with the needle eye technique

    Lüdge, A., Riemann, H., Schröder, W., Mühlbauer, A., Muiznieks, A. & Raming, G., 1998, Silicon materials science and technology: proceedings of the Eighth International Symposium on Silicon Materials Science and Technology. Pennington: Electrochemical Society, Inc.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  211. Published

    Improvement of Scale Reduction in Induction Heaters for Forging

    Mühlbauer, A., Börgerding, R., Drewek, R. & Jörn, K., 1998, Heat treating: including the 1997 International Induction Heat Treating Symposium : proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium, 15 - 18 September 1997, Indianapolis, Indiana. Ohio: ASM International

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  212. Published

    International Induction Heating Seminar IHS-98

    Nikanorov, A., 1998, In: Elektrowärme international (EWI). 56, B4, p. 177-179

    Research output: Contribution to journal › Article › Research

  213. Published

    Magnetische Streufelder in der Umgebung von Induktionsanlagen

    Nauvertat, G., Baake, E., Krahlisch, M., Nacke, B. & Köhler, D., 1998, In: Elektrowärme international (EWI). 56, B2, p. 61-68

    Research output: Contribution to journal › Article › Research

  214. Published

    Methods and Tools for All-Round Optimization of Transverse-Flux Induction Heaters

    Demidovitch, V., Nikanorov, A., Lupi, S., Dughiero, F., Ruhnke, A. & Mühlbauer, A., 1998, Heat treating: including the 1997 International Induction Heat Treating Symposium : proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium, 15 - 18 September 1997, Indianapolis, Indiana. Ohio: ASM International

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  215. Published

    Numerical modelling of the microscopic inhomogenities during FZ-silicon-growth

    Mühlbauer, A., Muiznieks, A., Raming, G., Riemann, H. & Lüdge, A., 1998, Crystal growth 1998: proceedings of the 12th International Conference on Crystal Growth and the 10th International Conference on Vapor Growth and Epitaxy, Jerusalem, Israel, July 26 - 31, 1998. Amsterdam: North-Holland Publ Co

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  216. Published

    Numerische Simulation von nichtlinearen Induktionserwärmungsanlagen mit automatischer Leistungsregelung

    Mühlbauer, A., Muiznieks, A., Raming, G. & Panschow, R., 1998, Workshop Automatisierung in der Elektrotechnologie: 24.-25. Sept. 1998. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  217. Published

    Reduction of Electromagnetic Stray-Fields in the Surrounding of Industrial Induction Installations by Optimized Design

    Baake, E. & Nauvertat, G., 1998, Heat treating: including the 1997 International Induction Heat Treating Symposium : proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium, 15 - 18 September 1997, Indianapolis, Indiana. Ohio: ASM International

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  218. Published

    Systematische Beratung zum optimierten Einsatz industrieller Elektroprozeßwärmeanlagen im Wettbewerbsmarkt

    Sonnenschein, P., 1998, Düsseldorf. 127 p.

    Research output: Thesis › Doctoral thesis

  219. 1997

  220. Published

    Analysis of the dopant segregation effects at the floating zone growth of large silicon crystals

    Mühlbauer, A., Muiznieks, A. & Virbulis, J., Oct 1997, In: Journal of crystal growth. 180, 3-4, p. 372-380 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  221. Published

    Analysis of Transient Dopant Segregation Effects at the Floating Zone Growth of Large Silicon Crystals

    Mühlbauer, A., Muiznieks, A. & Virbulis, J., 1997, Modelling in crystal growth: proceedings of the Second International Workshop on Modelling in Crystal Growth, Durbuy, Belgium, 13 - 16 October 1996. Amsterdam: North-Holland Publ Co, p. 3

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  222. Published

    Bericht von der Konferenz "Electromagnetic Processing of Materials" (EPM 97) in Paris, Frankreich

    Raming, G. & Vogt, M., 1997, In: Elektrowärme international (EWI). 55, B4, p. 138

    Research output: Contribution to journal › Article › Research

  223. Published

    Bessere Energienutzung sowie geringere Umwelt und Klimabelastung beim Schmelzen in Eisengießereien

    Neumann, F. & Baake, E., 1997, Wirtschaftliche Wärmenutzung in Industrie und Gewerbe: Tagung Braunschweig, 5. und 6. März 1997. Düsseldorf, p. 275-301 (VDI-Berichte; vol. 1296).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  224. Published

    Bestimmung des effektiven Wärmedurchgangskoeffizienten von Bauelementen unter praxisnahen Bedingungen

    Jakovics, A., Jekabsons, N., Mühlbauer, A. & Trümmann, H., 1997, In: Elektrowärme international (EWI). 55, A2, p. 77

    Research output: Contribution to journal › Article › Research

  225. Published

    Bewertung von Einsparpotentialen am Beispiel der Aluminiumherstellung

    Baake, E., 1997, Rationelle Energienutzung durch Strom: Tagung Essen, 25. und 26. Februar 1997. Düsseldorf, p. 101-114 14 p. (VDI Berichte).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  226. Published

    Electrodynamic Forces during Transverse Flux Heating of Metal Strips

    Ruhnke, A., Mühlbauer, A., Dughiero, F., Lupi, S., Nikanorov, A. & Demidovitch, V., 1997, L'induction dans les procédés industriels: congrès international; Paris-La-Defense, 26 - 29 mai 1997. Paris, Vol. 2. p. 87-93

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  227. Published

    Endabmessungsnahes Schmieden

    Börgerding, R., Jörn, K., Nacke, B. & Mertens, M., 1997, In: Elektrowärme international (EWI). 55, B4, p. 125

    Research output: Contribution to journal › Article › Research

  228. Published

    Energetische und thermische Bewertung industrieller Erwärmungsverfahren

    Baake, E., 1997, In: Elektrowärme international (EWI). 55, B1, p. 7-13

    Research output: Contribution to journal › Article › Research

  229. Published

    Entwicklungen in der Prozeßautomation

    Nacke, B., 1997, VDI Berichte (1292). p. 299-313 15 p. (VDI Berichte; vol. 1292).

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  230. Published

    Innovative Energienutzung durch Elektroprozeßwärme

    Mühlbauer, A. & Baake, E., 1997, Rationelle Energienutzung durch Strom: Tagung Essen, 25. und 26. Februar 1997. Düsseldorf, p. 51-63

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  231. Published

    Modelling of the floating zone growth of large silicon crystals

    Muiznieks, A., Raming, G. & Mühlbauer, A., 1997, L'induction dans les procédés industriels: congrès international; Paris-La-Defense, 26 - 29 mai 1997. Paris, Vol. 2. p. 179-184

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  232. Published

    Neues Produktionsverfahren für Motorenkomponenten aus Titan-Aluminiden

    Jörn, K., Vogt, M., Mühlbauer, A., Jarczyk, G. & Choudhury, A., 1997, Workshop Elektrophysikalische Verfahren: neue Aspekte und innovative Entwicklung : 10. Okt. 1997. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  233. Published

    New production process for TiAl-components based on cold crucible technology

    Vogt, M., Baake, E., Jörn, K., Mühlbauer, A., Jarczyk, G. & Choudhury, A., 1997, L'induction dans les procédés industriels: congrès international; Paris-La-Defense, 26 - 29 mai 1997. Paris, Vol. 2. p. 321-326

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  234. Published

    Numerical and experimental investigations into transverse flux induction heating

    Mohring, J. U., Leßmann, H. J., Mühlbauer, A. & Nacke, B., 1997, In: European Transactions on Electrical Power. 7, 3, p. 157-164 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  235. Published

    Optimierung des Betriebs induktiver Schmiedeblockerwärmer

    Börgerding, R., 1997, Düsseldorf.

    Research output: Thesis › Doctoral thesis

  236. Published

    Rationeller Energieeinsatz bei der Schmiedeerwärmung

    Börgerding, R. & Nauvertat, G., 1997, Rationelle Energienutzung durch Strom: Tagung Essen, 25. und 26. Februar 1997. Düsseldorf, p. 87-100

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  237. Published

    Reduction of Energy Consumption and Environmental Pollution during Melting in Iron Foundries: Part 1: Cupolas

    Neumann, F. & Baake, E., 1997, In: CP + T international : Casting plant + technology. 13, 3, p. 18-27

    Research output: Contribution to journal › Article › Research

  238. Published

    Reduction of Energy Consumption and Environmental Pollution during Melting in Iron Foundries: Part 2: Induction furnace

    Neumann, F. & Baake, E., 1997, In: CP + T international : Casting plant + technology. 13, 4, p. 8-12

    Research output: Contribution to journal › Article › Research

  239. Published

    Reduction of Scale, Energy Comsumption and CO2-Emission of Forging Processes

    Börgerding, R., Baake, E., Drewek, R., Jörn, K. & Mühlbauer, A., 1997, L'induction dans les procédés industriels: congrès international; Paris-La-Defense, 26 - 29 mai 1997. Paris, p. 61-66

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  240. Published

    Schmelzen von Sonderwerkstoffen im Kaltwand-Induktions-Tiegelofen

    Mühlbauer, A., Baake, E., Muiznieks, A., Vogt, M. & Jarczyk, G., 1997, In: Elektrowärme international (EWI). 55, B3, p. 86-93

    Research output: Contribution to journal › Article › Research

  241. Published

    Thermal Model of the Cold Crucible Process

    Bernier, F., Vogt, M., Muiznieks, A., Blum, M. & Mühlbauer, A., 1997, L'induction dans les procédés industriels: congrès international; Paris-La-Defense, 26 - 29 mai 1997. Paris, p. 389-394

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  242. Published

    Verminderung des Energiebedarfs sowie der Umwelt- und Klimabelastung beim Schmelzen in Eisengießereien: Teil 1: Kupolofen

    Neumann, F. & Baake, E., 1997, In: Giesserei : die Zeitschrift für Technik, Innovation und Management. 84, 9, p. 9-15

    Research output: Contribution to journal › Article › Research

  243. Published

    Verminderung des Energiebedarfs sowie der Umwelt- und Klimabelastung beim Schmelzen in Eisengießereien: Teil 2: Induktionsofen

    Neumann, F. & Baake, E., 1997, In: Giesserei : die Zeitschrift für Technik, Innovation und Management. 84, 10, p. 28-31

    Research output: Contribution to journal › Article › Research

  244. Published

    Wege zur Optimierung von Querfeld-Erwärmungsanlagen

    Ruhnke, A., Mühlbauer, A., Nikanorov, A. & Demidovitch, V., 1997, In: Elektrowärme international (EWI). 55, B4, p. 130

    Research output: Contribution to journal › Article › Research

  245. 1996

  246. Published

    Berechnung von elektromagnetischen Feldern in zylindrischen Induktionssystemen mit periodisch geschlitzten Wänden

    Westphal, E., Muiznieks, A. & Mühlbauer, A., 1 Aug 1996, In: Electrical engineering. 79, 4, p. 251-263

    Research output: Contribution to journal › Article › Research

  247. Published

    Electromagnetic field distribution in an induction furnace with cold crucible

    Westphal, E., Muiznieks, A. & Mühlbauer, A., May 1996, In: IEEE transactions on magnetics. 32, 3 PART 2, p. 1601-1604 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  248. Published

    Anwendungspotentiale elektrothermischer Verfahrenstechnik

    Vogt, M. & Blum, M., 1996, In: Elektrowärme international (EWI). 54, B4, p. 170-176

    Research output: Contribution to journal › Article › Research

  249. Published

    Automatische Anpassung in Mikrowellenerwärmungsanlagen

    Fricke, D. & Bernier, F., 1996, In: Elektrowärme international (EWI). 54, B4, p. 151-155

    Research output: Contribution to journal › Article › Research

  250. Published

    Berechnung der Temperaturverteilung in induktiv erwärmten Werkstücken

    Börgerding, R. & Mühlbauer, A., 1996, In: Elektrowärme international (EWI). 54, B1, p. 16-22

    Research output: Contribution to journal › Article › Research

  251. Published

    Elektromagnetisches und thermisches Verhalten des Kaltwand-Induktions-Tiegelofens

    Westphal, E., 1996, Düsseldorf.

    Research output: Thesis › Doctoral thesis

  252. Published

    Energiebedarf und CO2-Emission industrieller Prozeßwärmeverfahren

    Baake, E., Jörn, U. & Mühlbauer, A., 1996, Essen. 167 p.

    Research output: Book/Report › Monograph › Research

  253. Published

    Experimental and Numerical Investigations of Industrial Heating Processes

    Mühlbauer, A. & Leßmann, H., 1996, XIII International Congress on Electricity Applications: International Convention Centre, Birmingham, UK, 16 - 20 June 1996. London, p. RE33-RE40

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  254. Published

    Experimental and numerical investigations of the melt fow in channel-induktion Furnaces

    Drewek, R., Jakovics, A., Mühlbauer, A. & Nacke, B., 1996, In: Magnitnaja gidrodinamika. p. 433-442

    Research output: Contribution to journal › Article › Research

  255. Published

    Induktive Erwärmung von rotationssymmetrischen Einsätzen komplizierter Form aus ferromagnetischem Stahl

    Mühlbauer, A., Muiznieks, A. & Panschow, R., 1996, In: Elektrowärme international (EWI). 54, B2, p. 78-86

    Research output: Contribution to journal › Article › Research

  256. Published

    Innovativer Einsatz elektrothermischer Verfahren

    Westphal, E. & Blum, M., 1996, Automatisierung und innovative Techniken in Verkehrs- und Energiesystemen: Vorträge der ETG-Fachtagung anläßlich des VDE-Kongresses '96 am 16. und 17. Oktober 1996 in Braunschweig. Berlin: VDE Verlag GmbH

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  257. Published

    Innovativer Einsatz elektrothermischer Verfahrenstechnik

    Drewek, R. & Mühlbauer, A., 1996, Tagungsband Zwischenbilanz zur rationellen Energienutzung bei Thermoprozessanlagen, insbesondere Industrieöfen: Workshop am 30. und 31. Mai 1996 in Düsseldorf. Karlsruhe, p. 61-80

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  258. Published

    Messung von temperaturabhängigen Permittivitäten im Mikrowellenbereich

    Pohl, V., 1996, Düsseldorf.

    Research output: Thesis › Doctoral thesis

  259. Published

    Neues Fertigungsverfahren für Autoventile aus TiAl-Legierungen

    Baake, E. & Jörn, K., 1996, In: Uni-Magazin, Hannover. 1996, 3, p. 2-3

    Research output: Contribution to journal › Article › Research

  260. Published

    Ressourcenschonende Energienutzung mittels Elektrowärme

    Baake, E. & Mühlbauer, A., 1996, Automatisierung und innovative Techniken in Verkehrs- und Energiesystemen: Vorträge der ETG-Fachtagung anläßlich des VDE-Kongresses '96 am 16. und 17. Oktober 1996 in Braunschweig. Berlin: VDE Verlag GmbH, p. 53-62

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  261. Published

    Verschleißmechanismen in Induktions-Rinnenöfen für Gußeisen und Aluminium

    Drewek, R., 1996, Düsseldorf.

    Research output: Thesis › Doctoral thesis

  262. Published

    Zunderentwicklung bei der induktiven Schmiedeerwärmung

    Drewek, R., Börgerding, R. & Jörn, K., 1996, In: Elektrowärme international (EWI). 54, B4, p. 189-193

    Research output: Contribution to journal › Article › Research

  263. 1995

  264. Published

    Neue entwicklungen bei der automatisierung induktiver giesseinrichtungen

    Nacke, B., Kessler, M. & Andree, W., Sept 1995, In: Elektrowärme International (EWI) Edition B: Industrielle Elektrowärme. 53, 3, p. B138-B143 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  265. Published

    Interface shape, heat transfer and fluid flow in the floating zone growth of large silicon crystals with the needle-eye technique

    Mühlbauer, A., Muiznieks, A., Virbulis, J., Lüdge, A. & Riemann, H., 2 May 1995, In: Journal of crystal growth. 151, 1-2, p. 66-79 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  266. Published

    Extension of the k-ε model for the numerical simulation of the melt flow in induction crucible furnaces

    Baake, E., Mühlbauer, A., Andree, W. & Jakovics, A., May 1995, In: Metallurgical and Materials Transactions B. 26, 3, p. 529-536 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  267. Published

    5 Jahre Meßwerterfassung: Ergebnisse einer 5,2-kWp-PV-Anlage im Netzparallel-Betrieb

    Westphal, E., Panschow, R., Nauvertat, G. & Mommertz, W., 1995, In: Sonnenenergie : offizielles Fachorgan der Deutschen Gesellschaft für Sonnenenergie e.V. ; Zeitschrift für erneuerbare Energien und Energieeffizienz. 20, 4, p. 19-21

    Research output: Contribution to journal › Article › Research

  268. Published

    Abschätzung des erschließbaren Potentials der Photovoltaik in einer mittleren Großstadt

    Mühlbauer, A., Westphal, E., Petry, W. & Schneider, A., 1995, In: EW – Magazin für die Energiewirtschaft. 94, 7, p. 341-348

    Research output: Contribution to journal › Article › Research

  269. Published

    Bericht vom "International Symposium on Electromagnetic Processing of Materials (EPM'94)" in Nagoya, Japan

    Baake, E., 1995, In: Elektrowärme international (EWI). 53, B1, p. 39-42

    Research output: Contribution to journal › Article › Research

  270. Published

    Controlling heat transfer in channel-induction furnaces

    Drewek, R. & Mühlbauer, A., 1995, Advances in engineering heat transfer: proceedings of the Second Baltic Heat Transfer Conference. Southhampton, p. 451-460

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  271. Published

    Deposit Formation and Clogging in Induction Channel Furnaces

    Bethers, U., Jakovics, A., Jekabsons, N., Madzulis, I. & Nacke, B., 1995, 40. Internationales Wissenschaftliches Kolloquium: Vortragsreihen : elektrophysikalische Techniken, elektromagnetische Verträglichkeit/Netzvorgänge, elektrische Maschinen und Antriebe, technische Diagnostik an Hochspannungsisolierungen . Ilmenau, Vol. 4. p. 31-36

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  272. Published

    Electromagnetic field distribution in an induction furnace with cold crucible

    Westphal, E., Muiznieks, A. & Mühlbauer, A., 1995, 10th Conference on the Computation of Electromagnetic Fields (COMPUMAG '95): Berlin, Germany, July 10 - 13, 1995 . New York, p. 402-403

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  273. Published

    Gestaltung der Temperaturverteilung bei induktiver Querfeld-Banderwärmung

    Mühlbauer, A. & Leßmann, H., 1995, ETG-Tage '95: Beiträge im Rahmen der ETG-Tage '95 am 10. und 11. Oktober 1995 in Essen ; Plenarveranstaltung: Europäischer Stromverbund ; Jungingenieur-Forum. Berlin: VDE Verlag GmbH, p. 69-74 (ETG-Fachbericht; vol. 57).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  274. Published

    Infiltration von Zink in feuerfester Zustellung von Induktions-Rinnenöfen

    Jekabsons, N., Jakovics, A. & Nacke, B., 1995, 40. Internationales Wissenschaftliches Kolloquium: Vortragsreihen : elektrophysikalische Techniken, elektromagnetische Verträglichkeit/Netzvorgänge, elektrische Maschinen und Antriebe, technische Diagnostik an Hochspannungsisolierungen . Ilmenau, Vol. 4. p. 54-59

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  275. Published

    Influence of the temperature distribution of the build-up formation in the induction channel furnaces

    Bethers, U., Jakovics, A., Jekabsons, N., Madzulis, I., Nacke, B. & Mühlbauer, A., 1995, Advances in engineering heat transfer: proceedings of the Second Baltic Heat Transfer Conference. Southhampton, p. 433-443

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  276. Published

    Institut für Elektrowärme der Universität Hannover

    Leßmann, H. & Mühlbauer, A., 1995, In: Elektrowärme international (EWI). 53, B1, p. 48-61

    Research output: Contribution to journal › Article › Research

  277. Published

    Möglichkeiten der Energieeinsparung und Emissionsreduzierung bei industriellen Prozeßwärmeverfahren

    Baake, E., 1995, ETG-Tage '95: Beiträge im Rahmen der ETG-Tage '95 am 10. und 11. Oktober 1995 in Essen ; Plenarveranstaltung: Europäischer Stromverbund ; Jungingenieur-Forum. Berlin: VDE Verlag GmbH, p. 93-98 (ETG-Fachbericht; vol. 57).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  278. Published

    Neues Fertigungsverfahren für Automobilventile aus Titan-Aluminium-Legierungen

    Mühlbauer, A., Westphal, E., Choudhury, A. & Blum, M., 1995, In: Elektrowärme international (EWI). 53, B1, p. 13-17

    Research output: Contribution to journal › Article › Research

  279. Published

    Numerical modeling of the float zone silicon crystal growth

    Virbulis, J., Mühlbauer, A. & Jakovics, A., 1995, 10th Conference on the Computation of Electromagnetic Fields (COMPUMAG '95): Berlin, Germany, July 10 - 13, 1995 . New York, p. 606-607

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  280. Published

    Numerische und experimentelle Untersuchung des elektromagnetischen und thermischen Verhaltens des Kaltwand-Induktions-Tiegelofens

    Westphal, E., 1995, 40. Internationales Wissenschaftliches Kolloquium: Vortragsreihen : elektrophysikalische Techniken, elektromagnetische Verträglichkeit/Netzvorgänge, elektrische Maschinen und Antriebe, technische Diagnostik an Hochspannungsisolierungen . Ilmenau, Vol. 4. p. 25-30

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  281. Published

    Strategien zur Prozeßoptimierung beim Schmieden

    Börgerding, R. & Mühlbauer, A., 1995, In: Elektrowärme international (EWI). 53, B3, p. 122-127

    Research output: Contribution to journal › Article › Research

  282. Published

    Study of heat fluxes in the induction furnace with cold crucible

    Westphal, E., Mühlbauer, A., Muiznieks, A. & Virbulis, J., 1995, Advances in engineering heat transfer: proceedings of the Second Baltic Heat Transfer Conference. Southhampton, p. 471-782

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  283. Published

    Umweltverträglichkeit von elektrischen Schmelzverfahren

    Baake, E. & Mühlbauer, A., 1995, In: Elektrowärme international (EWI). 53, B2, p. 74-78

    Research output: Contribution to journal › Article › Research

  284. Published

    Universitäts-PV-Anlage - Netzgekoppelte 1,8 kWp-PV-Anlage installiert

    Westphal, E., Nauvertat, G. & Halfpaap, H., 1995, In: Sonnenenergie : offizielles Fachorgan der Deutschen Gesellschaft für Sonnenenergie e.V. ; Zeitschrift für erneuerbare Energien und Energieeffizienz. 21, 6, p. 28

    Research output: Contribution to journal › Article › Research

  285. 1994

  286. Published

    Inductive cross-field heating. A flexible heating process for metallic flat products

    Nacke, B., Andree, W. & Kroes, H. J., Aug 1994, Stahl und Eisen, 114, 8, p. 69-74 6 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  287. 1989

  288. Published

    Zur Schmelzenstroemung in Induktionsrinnenofen

    Muehlbauer, A., Nacke, B. & Walther, A., Feb 1989, Elektrowärme International (EWI) Edition B: Industrielle Elektrowärme, 47, 1, p. 22-29 8 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  289. 1988

  290. Published

    Aspekte zur Beurteilung des Pincheffektes in Induktionsrinnenöfen

    Fricke, R., Muehlbauer, A. & Nacke, B., Dec 1988, In: Elektrowärme International (EWI) Edition B: Industrielle Elektrowärme. 46, 6, p. 300-304 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  291. Published

    INDUKTIVE MEHRFACHERWARMUNG.

    Nacke, B. & Muhlbauer, A., Jun 1988, Elektrowärme International (EWI) Edition B: Industrielle Elektrowärme, 46, 3, p. b141-b148.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  292. Published

    NUMERISCHE SIMULATION DES INDUKTIVEN ERWAERMUNGSVORGANGES IN

    Nacke, B. & Muehlbauer, A., Apr 1988, Elektrowärme International (EWI) Edition B: Industrielle Elektrowärme, 46, 2, p. 93-101 9 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  293. 1987

  294. Published

    A PROPOS DES CALCULS DES FOURS INDUCTIFS EN CONSIDERATION D'EXPERIENCES PRACTIQUES.

    Kozeny, J., Muehlbauer, A. & Nacke, B., Jul 1987, In: Elektrotechnicky obzor (Elektrotechnischer Horizont). 76, 7, p. 370-374 5 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 Next