Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Electrothermic Process Engineering

Organisational unit: Institute

Type of address: Visitor addres
Wilhelm-Busch-Straße 4
30167
Hannover
161 - 320 out of 777Page size: 160
Order:

Publications

  1. 2017

  2. Published

    Simulation algorithm for induction heating of rotated workpieces with complex shape

    Mannanov, E., Galunin, S., Nikanorov, A. & Nacke, B., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 491-496

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  3. Published

    Simulation von Oberflächen Umschmelzprozessen in mehrschichtigen metallischen Bauteilen

    Baake, E., Steinberg, T., Spitans, S. & Hädicke, L., 2017, In: Elektrowärme international (EWI). 75, 4, p. 75-79 5 p.

    Research output: Contribution to journal › Article › Research

  4. Published

    System sizing for residential PV and EES systems

    Melloh, T., Fehling, T. C. L. S., Kleiss, G. & Nacke, B., 2017, 33rd European Photovoltaic Solar Energy Conference and Exhibition: proceedings of the international conference held in Amsterdam, The Netherlands, 25 September-29 September 2017. München, p. 2280-2283

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  5. Published

    Three-criteria numerical optimization as a base for designing induction mass heating

    Pleshivtseva, Y., Rapoport, E., Di Barba, P., Nacke, B., Nikanorov, A., Sieni, E., Forzan, M. & Lupi, S., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 288-295

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  6. Published

    Visualization of Gallium crystallization process under the influence of EM field by means of neutron radiography

    Musaeva, D., Baake, E., Ilin, V. & Köppen, A., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 261-266

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  7. Published

    XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017

    Baake, E. (Editor) & Nacke, B. (Editor), 2017, Essen. 534 p.

    Research output: Book/Report › Conference proceeding › Research

  8. 2016

  9. Published

    Numerical simulation of turbulent flows, heat and mass transfer in metallurgical induction processes

    Baake, E., Umbrashko, A. & Jakovics, A., 13 Dec 2016, In: Steel research international. 78, 5, p. 413-418 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    Einfluss von niederfrequenten gepulsten lorentz kraften auf aluminiumlegierungen: numerische Berechnung und experimentelle Verifikation

    Dietrich, A., Schülbe, H. & Nacke, B., Dec 2016, In: Elektrowärme international (EWI). 74, 4, p. 65-70 6 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Surface morphology and structure of double-phase magnetic alkali borosilicate glasses

    Andreeva, N. V., Naberezhnov, A. A., Tomkovich, M. V., Nacke, B., Kichigin, V., Rudskoy, A. I. & Filimonov, A. V., 24 Nov 2016, In: Metal science and heat treatment. 58, 7-8, p. 479-482 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  12. Published

    Experimental investigation of Al-alloy directional solidification in pulsed electromagnetic field

    Musaeva, D. A., Baake, E. & Ilin, V. K., 5 Sept 2016, In: Materials Science Forum. 870, p. 471-476 6 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  13. Published

    Experimental investigation of low-frequency pulsed Lorentz force influence on the motion of Galinstan melt

    Musaeva, D., Ilyin, V., Geža, V. & Baake, E., 20 Aug 2016, In: St. Petersburg Polytechnical University Journal: Physics and Mathematics. 2, 3, p. 193-200

    Research output: Contribution to journal › Article › Research

  14. Published

    Simulation and optimisation of heating stages in a new resource efficient forging process chain

    Wipprecht, S., Baake, E., Nacke, B., Pleshivtseva, Y. & Korshikov, S., 26 Jul 2016, In: International Journal of Microstructure and Materials Properties. 11, 1-2, p. 18-33 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  15. Published

    Dynamics of electrothermal processes for cut or welded strips in the induction through-heaters

    Blinov, K., Galunin, S., Nikanorov, A., Zimakova, A. & Nacke, B., 5 Apr 2016, 2016 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW). Shaposhnikov, S. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 508-512 5 p. 7448234

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  16. Published

    Analysis of the AlMgSi-alloy structure, formed under the influence of the low-frequency pulsed Lorentz force

    Musaeva, D., Geža, V., Baake, E. & Ilyin, V., 2016, Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD: DIEE, University of Cagliari, June 20-24, 2016, Cagliari, Italy. Cagliari, p. 341-345

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  17. Published

    Einfluss von niederfrequenten gepulsten Lorentz Kräften auf Aluminiumlegierungen

    Musaeva, D., Steinberg, T., Baake, E., Jarczyk, G. & Ilin, V., 2016, In: Elektrowärme international (EWI). 74, 4, p. 65-70

    Research output: Contribution to journal › Article › Research

  18. Published

    Fundamentals of induction heating, Handbook Induction Heating

    Nacke, B. & Baake, E., 2016, Induction heating: heating | hardening | annealing | brazing | welding. Essen, p. 1-44

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  19. Published

    Induction assisted laser and hybrid-welding processes

    Nacke, B., Schülbe, H. & Neumeyer, J., 2016, Induction heating: heating | hardening | annealing | brazing | welding. Essen, p. 182-186

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  20. Published

    Induction Heating: Heating / Hardening / Annealing / Brazing / Welding

    Nacke, B. & Baake, E., 2016, Essen. 270 p.

    Research output: Book/Report › Anthology › Research

  21. Published

    Induktive Längsfelderwärmung von dünnem Metallband: Numerische Berechnung und experimentelle Verifkation

    Dietrich, A., Schülbe, H. & Nacke, B., 2016, In: Elektrowärme international (EWI). 2016, 1, p. 65-70 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  22. Published

    Influence of low-frequency pulsed Lorentz force on the melt flow and structure of solidifying material

    Musaeva, D., Geža, V., Baake, E. & Ilin, V., 2016, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 14, 1, p. 73-78

    Research output: Contribution to journal › Article › Research

  23. Published

    Numerical and experimental investigations of a large scale electromagnetic levitation melting of metals

    Spitans, S., Baake, E., Jakovics, A. & Franz, H., 2016, Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD: DIEE, University of Cagliari, June 20-24, 2016, Cagliari, Italy. Cagliari, p. 366-370

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  24. Published

    Numerical simulation of core-free design of a large electromagnetic pump with double stator

    Geža, V. & Nacke, B., 2016, In: Magnetohydrodynamics. 52, 3, p. 417-431 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  25. Published

    Numerical simulation of multiphase bubble flow in electroconducting liquids by Lattice Boltzmann method

    Tatulcenkovs, A., Jakovics, A., Baake, E. & Nacke, B., 2016, Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD: DIEE, University of Cagliari, June 20-24, 2016, Cagliari, Italy. Cagliari, p. 382-386

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  26. Published

    Production of silicon ingot by continuous melting and solidification in cold crucible

    Kichigin, V., Nacke, B., Pechenkov, A. & Posniak, L., 2016, Proceedings of the 10th PAMIR International Conference on Fundamental and Applied MHD: DIEE, University of Cagliari, June 20-24, 2016, Cagliari, Italy. Cagliari, p. 300-302

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  27. 2015

  28. Published

    Numerical Modeling of Free Surface Dynamics of Melt in an Alternate Electromagnetic Field. Part II: Conventional Electromagnetic Levitation

    Spitans, S., Baake, E., Nacke, B. & Jakovics, A., 16 Nov 2015, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 1, p. 522-536 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  29. Published

    Critical X-ray scattering in mixed piezoelectric material PbZr0.6Ti0.4O3

    Andronikova, D., Bronwald, Y., Burkovsky, R., Chernyshev, D., Filimonov, A., Nacke, B., Ye, Z. G. & Vakhrushev, S., 30 Oct 2015, In: Solid State Phenomena. 245, p. 211-216 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  30. Published

    Optimization of Induction Heating Regarding Typical Quality Criteria: Problem Solution Based on 2D FEM Analysis

    Pleshivtseva, Y., Nacke, B. & Popov, A., 7 Sept 2015, In: Applied Mathematics and Mechanics (English Edition). 792, p. 462-467

    Research output: Contribution to journal › Article › Research

  31. Published

    The Numerical Model of Electrothermal Deformations of Carbides in Bearing Steel as the Possible Cause of White Etching Cracks Initiation

    Ščepanskis, M., Jakovičs, A., Kaldre, I., Holweger, W., Nacke, B. & Diederichs, A. M., 23 Aug 2015, In: Tribology letters. 59, 2, 10 p., 37.

    Research output: Contribution to journal › Article › Research › peer review

  32. Published

    Molten Salts Cannot be Used for the Study of Turbulent Electromagnetically Driven Flows of Liquid Metal

    Ščepanskis, M., Jakovičs, A., Baake, E. & Nacke, B., 9 Jul 2015, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 46, 5, p. 2015-2017 3 p.

    Research output: Contribution to journal › Article › Research › peer review

  33. Published

    Approaches for coupled numerical simulation of high frequency tube welding process

    Nikanorov, A., Baake, E., Brauer, H. & Weil, C., 1 Apr 2015, COUPLED PROBLEMS 2015 : Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering. Schrefler, B. A., Onate, E. & Papadrakakis, M. (eds.). p. 657-665 9 p. (COUPLED PROBLEMS 2015 - Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  34. Published

    Coupled numerical multiphysics simulation methods in induction surface hardening

    Schlesselmann, D., Nacke, B., Nikanorov, A. & Galunin, S., 1 Apr 2015, COUPLED PROBLEMS 2015: Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering. Onate, E., Papadrakakis, M. & Schrefler, B. A. (eds.). p. 392-403 12 p. (COUPLED PROBLEMS 2015 - Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  35. Published

    Production of magnetic alkali-borosilicate glasses by induction melting

    Naberezhnov, A. A., Koroleva, E. Y., Filimonov, A. V., Rudskoy, A. I., Nacke, B., Kichigin, V. & Nizhankovskii, V., Mar 2015, In: Metal science and heat treatment. 56, 11-12, p. 681-684 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  36. Published

    A model for homogenization of solid alloying admixtures in an induction crucible furnace

    Ščepanskis, M., Jakovičs, A., Baake, E. & Nacke, B., 2 Feb 2015, In: Steel research international. 86, 2, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  37. Published

    Neue Anwendungsbereiche numerischer Simulation beim induktiven Randschichthärten mit Feldkonzentratoren

    Schlesselmann, D., Yu, Z., Dalinger, A. & Nacke, B., Feb 2015, In: HTM - Journal of Heat Treatment and Materials. 70, 1, p. 40-49 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  38. Published

    3 D modelling of rotational field for stirring of molten metal

    Galunin, S., Blinov, Y., Volchkov, A., Nacke, B. & Nikanorov, A., 2015, 2015 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW). Shaposhnikov, S. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 188-191 4 p. 7102259

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  39. Published

    Adaption and verification of numerical models for gas bubbles dynamics in electroconductive fluid

    Steinberg, T. & Baake, E., 2015, 8th International Conference on Electromagnetic Processing of Materials: EPM 2015, Oktober 12 - 16, 2015, Hotel Majestic Barrière, Cannes, France. St Martin d'Hères, p. 449-452

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  40. Published

    A hypothesis on the electromagnetic cause of white etching cracks in bearing steel

    Scepanskis, M. L. H., Jakovics, A., Kaldre, I., Holweger, W. & Nacke, B., 2015, Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2015. Society of Tribologists and Lubrication Engineers, p. 914-916 3 p. (Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2015).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  41. Published

    Anisotropy of flow and transition between mixing regimes in a physical model of directional solidification

    Geža, V., Nacke, B., Baake, E. & Jakovičs, A., 2015, In: Magnetohydrodynamics. 51, 1, p. 15-24 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  42. Published

    Continuous melting and pouring of an aluminium oxide based melt with cold crucible

    Nacke, B., Kichigin, V. & Geža, V., 2015, 8th International Conference on Electromagnetic Processing of Materials: EPM 2015, Oktober 12 - 16, 2015, Hotel Majestic Barrière, Cannes, France. St Martin d'Hères, p. 11-14

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  43. Published

    Design optimization of induction heater in planetary reactors for semiconductor industry

    Nikanorov, A., Nacke, B. & Zedler, T., 2015, Energy systems, materials and designing in mechanical engineering: selected, peer reviewed papers from the International Conference for Young Scientists "Electrical Engineering, Electrotechnology, Energy", June 9-12, 2015, Novosibirsk, Russia. Pfaffikon, p. 505-510 (Applied mechanics and materials; vol. 792).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  44. Published

    Detailed 3-D numerical investigation of continuous longitudinal flux heating for thin strips

    Dietrich, A., Schülbe, H. & Nacke, B., 2015, 8th International Conference on Electromagnetic Processing of Materials: EPM 2015, Oktober 12 - 16, 2015, Hotel Majestic Barrière, Cannes, France . St Martin d'Hères, p. 557-560

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  45. Published

    Electromagnetic levitation melting of metals on a large scale

    Spitans, S., Baake, E. & Jakovics, A., 2015, 8th International Conference on Electromagnetic Processing of Materials: EPM 2015, Oktober 12 - 16, 2015, Hotel Majestic Barrière, Cannes, France. St Martin d'Hères, p. 583-586

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  46. Published

    Electrothermal Processes

    Nacke, B. & Baake, E., 2015, Handbook of heat processing: fundamentals, calculations, processes. Essen, p. 261-326

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  47. Published

    Energieeffizienz in der industriellen Prozesstechnik

    Baake, E. & Beneke, F., 2015, In: Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. p. 29-36

    Research output: Contribution to journal › Article › Research

  48. Published

    Entwicklung und Optimierung eines Erwarmungsverfahrens fur das ressourceneffiziente Schmieden

    Wipprecht, S. & Baake, E., 2015, In: Elektrowärme international (EWI). 73, 1, p. 65-69 5 p.

    Research output: Contribution to journal › Article › Research

  49. Published

    Handbook of Thermoprocessing Technologies

    Beneke, F. & Nacke, B., 2015, Essen. 674 p.

    Research output: Book/Report › Handbook › Research

  50. Published

    Institut für Elektroprozesstechnik der Leibniz Universität Hannover

    Nacke, B. & Baake, E., 2015, In: Elektrowärme international (EWI). 73, 2, p. 109-117

    Research output: Contribution to journal › Article › Research

  51. Published

    Les-study of heat transfer in the melt for metallurgical mhd devices with power supply by inductor and over electrodes

    Pavlovs, S., Jakovičs, A., Sushkovs, V. & Nacke, B., 2015, In: Magnetohydrodynamics. 51, 1, p. 67-82 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  52. Published

    New technology for large scale electromagnetic levitation melting of metals

    Spitans, S., Baake, E., Nacke, B. & Jakovičs, A., 2015, In: Magnetohydrodynamics. 51, 1, p. 121-132 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  53. Published

    Numerical simulation of electromagnetic levitation in a cold crucible furnace

    Spitans, S., Baake, E., Jakovičs, A. & Franz, H., 2015, In: Magnetohydrodynamics. 51, 3, p. 567-578 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  54. Published

    Numerical simulation of the melt flow in an induction crucible furnace driven by a Lorentz force pulsed at low frequency

    Musaeva, D., Ilin, V., Baake, E. & Geža, V., 2015, In: Magnetohydrodynamics. 51, 4, p. 771-784 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  55. Published

    Numerical study of gas bubbles collective dynamics in the melt influenced with magnetic field

    Jakovics, A., Pavlovs, S., Baake, E., Steinberg, T., Sushkovs, V. & Tatulcenkovs, A., 2015, 8th International Conference on Electromagnetic Processing of Materials: EPM 2015, Oktober 12 - 16, 2015, Hotel Majestic Barrière, Cannes, France. St Martin d'Hères, p. 183-186

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  56. Published

    Numerical study of turbulent flow and thermal field in industrial electrotechnological devices with combined power supply: simulation for investigation and design of steel strip induction heating lines for rolling mills

    Pavlovs, S., Jakovics, A., Sushkovs, V. & Nacke, B., 2015, 8th International Conference on Electromagnetic Processing of Materials: EPM 2015, Oktober 12 - 16, 2015, Hotel Majestic Barrière, Cannes, France. St Martin d'Hères, p. 147-150

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  57. Published

    Silicon Crystallization for Photovoltaic Applications

    Franz, H., Baake, E., Biebricher, U., Flinspach, J., Hohmann, M., Morche, C., Nacke, B., Reiter, G. & Zimmermann, A., 2015, LMPC 2015: proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting ; [20 - 24 September 2015, Leoben, Austria]. Knittelfeld, p. 587

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  58. Published

    Simulation of primary heating stage in resource efficient forging chain

    Pleshivtseva, Y., Korshikov, S., Wipprecht, S., Makarov, E. & Nacke, B., 2015, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 13, 1, p. 85-90

    Research output: Contribution to journal › Article › Research

  59. 2014

  60. Published

    Influence of the Richardson number on em force driven flow structures in square-shaped crucible

    Geza, V., Nacke, B., Baake, E. & Jakovics, A., 1 Sept 2014, In: Journal of crystal growth. 401, p. 895-898 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  61. Published

    Solid inclusions in an electromagnetically induced recirculated turbulent flow: Simulation and experiment

    Ščepanskis, M., Jakovičs, A., Baake, E. & Nacke, B., Sept 2014, In: International Journal of Multiphase Flow. 64, p. 19-27 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  62. Published

    Morphology and magnetic properties of ferriferous two-phase sodium borosilicate glasses

    Naberezhnov, A., Porechnaya, N., Nizhankovskii, V., Filimonov, A. & Nacke, B., 5 Aug 2014, In: Scientific World Journal. 2014, 320451.

    Research output: Contribution to journal › Article › Research › peer review

  63. Published

    A numerical model for coupled free surface and liquid metal flow calculation in electromagnetic field

    Spitans, S., Baake, E., Nacke, B. & Jakovics, A., 20 Jan 2014, In: International Journal of Applied Electromagnetics and Mechanics. 44, 2, p. 171-182 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  64. Published

    Numerical calculation and comparison of temperature profiles and martensite microstructures in induction surface hardening processes

    Schlesselmann, D., Nikanorov, A., Nacke, B., Galunin, S., Schön, M. & Yu, Z., 20 Jan 2014, In: International Journal of Applied Electromagnetics and Mechanics. 44, 2, p. 137-145 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  65. Published

    Selected papers from HES 2013 Conference

    Baake, E., Di Barba, P., Dughiero, F. & Forzan, M., 20 Jan 2014, In: International Journal of Applied Electromagnetics and Mechanics. 44, 2, p. 125-126 2 p.

    Research output: Contribution to journal › Editorial in journal › Research › peer review

  66. Published

    3D LES two-phase flow simulation of conventional electromagnetic levitation melting experiment

    Spitans, S., Baake, E., Nacke, B. & Jakovics, A., 2014, 9th PAMIR International Conference "Thermo Acoustic and Space Technologies": Riga, Latvia, June 16 - 20, 2014. Salaspils, p. 261-265

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  67. Published

    Anisotropy of flow and transition between mixing regimes in physical model of directional solidification

    Geža, V., Nacke, B., Baake, E. & Jakovics, A., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 427-432

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  68. Published

    Anisotropy of flow and transition between mixing regimes in stratified EM force generated flow

    Geža, V., Baake, E., Nacke, B. & Jakovics, A., 2014, 9th International Conference on Fundamental and Applied MHD, Thermo Acoustic and and Space Technologies: Riga, Latvia, June 16 - 20, 2014. Grenovle, p. 214-

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  69. Published

    Approaches for numerical simulation of high frequency tube welding process

    Nikanorov, A., Baake, E. & Schülbe, H., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 177-182

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  70. Published

    CO2-freie Produktion von Wasserstoff durch den Einsatz von Flüssigmetall

    Steinberg, T. & Baake, E., 2014, In: Elektrowärme international (EWI). 72, 2, p. 59-62

    Research output: Contribution to journal › Article › Research

  71. Published

    Components, Design, and Operation of Vacuum Induction Crucible Furnaces

    Baake, E., 2014, Induction heating and heat treatment. Materials Park: ASM International, p. 462-466

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  72. Published

    CO2-freie Produktion von Wasserstoff durch den Einsatz von FlüssgmetaII

    Steunberg, T. & Baake, E., 2014, Elektrowärme international (EWI), 2, p. 59-62 4 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  73. Published

    Coupled 3D simulation of free surface dynamics and liquid metal flow in EM levitation melting furnaces

    Spitans, S., Baake, E., Nacke, B. & Jakovics, A., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 195-202

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  74. Published

    Dynamic of electromagnetic and thermal processes in the induction system for strip and slab heating

    Blinov, K., Nikanorov, A. & Nacke, B., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 433-438

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  75. Published

    Electromagnetic impact on early white etching cracks in inhomogeneous structure of bearing steel

    Ščepanskis, M., Jakovičs, A., Kaldre, I., Maniks, J., Nacke, B. & Holweger, W., 2014, Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2014. 1 ed. Society of Tribologists and Lubrication Engineers, p. 341-343 3 p. (Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2014; vol. 1).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  76. Published

    Energy efficiency in thermo-processing plants

    Beneke, F. & Baake, E., 2014, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2014, Anniversary Issue, p. 119-125

    Research output: Contribution to journal › Article › Research

  77. Published

    Grundlagen der induktiven Erwärmung

    Nacke, B. & Baake, E., 2014, Induktives Erwärmen: Wärmen, Härten, Glühen, Löten, Schweißen. Essen, p. 1-46

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  78. Published

    Hydrodynamic of the melt of aluminum oxide in cold crucible at continuous melting and discharging

    Geža, V., Kichigin, V., Nacke, B. & Pozniak, I., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 473-474

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  79. Published

    Importance of electrothermal processing technologies

    Baake, E., 2014, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2014, Anniversary Issue, p. 19-21

    Research output: Contribution to journal › Article › Research

  80. Published

    Induction assisted hybrid-welding processes to join heavy-walled steel components

    Neumeyer, J. & Nacke, B., 2014, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 12, 3, p. 111-114

    Research output: Contribution to journal › Article › Research

  81. Published

    Induktives Erwärmen: Wärmen, Härten, Glühen, Löten, Schweißen

    Nacke, B. (Editor) & Baake, E. (Editor), 2014, Essen. 262 p.

    Research output: Book/Report › Anthology › Research

  82. Published

    Induktive Unterstützung von Hybrid-Schweißprozessen

    Neumeyer, J. & Nacke, B., 2014, In: Elektrowärme international (EWI). 72, 1, p. 57-60

    Research output: Contribution to journal › Article › Research

  83. Published

    Induktive unterstützung von hybrid-schweißverfahren

    Neumeyer, J. & Nacke, B., 2014, In: Elektrowärme international (EWI). 1, p. 57-60 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  84. Published

    Induktiv unterstützte Laser- und Hybridschweißverfahren

    Neumeyer, J., Nacke, B. & Schülbe, H., 2014, Induktives Erwärmen : Wärmen, Härten, Glühen, Löten, Schweißen. Essen, p. 177-182

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  85. Published

    Influence of low-frequency pulsed force of electromagnetic field on the temperature field mixing of the melt in induction crucible furnace

    Musaeva, D., Ilin, V., Baake, E. & Geža, V., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 411-414

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  86. Published

    Inluence of an EM field on changes in microstructure of bearing steel

    Kaldre, I., Scepanskis, M., Jakovics, A., Maniks, J., Nacke, B. & Holweger, W., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014 . Hannover, p. 265-270

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  87. Published

    Introduction and fundamental principles, Energy and environmental aspects of induction melting processes

    Baake, E. & Nacke, B., 2014, ASM handbook: Induction heating and heat treatment. Materials Park: ASM International, p. 405-415; 548-554

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  88. Published

    Investigation of hydrodynamics of alumina oxide in a cold crucible at continuous melting and discharging

    Kichigin, V., Geža, V., Nacke, B. & Pozniak, I., 2014, 9th International Conference on Fundamental and Applied MHD, Thermo Acoustic and and Space Technologies: Riga, Latvia, June 16 - 20, 2014. Grenoble, p. 242-246

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  89. Published

    Konturnahes induktives Randschichthärten schrägverzahnter Bauteile

    Krause, C. & Schlesselmann, D., 2014, In: Elektrowärme international (EWI). 72, 3, p. 61-65 5 p.

    Research output: Contribution to journal › Article › Research

  90. Published

    LES-study of melt flow driven by combined inductive and conductive power supply in metallurgical MHD devices

    Pavlovs, S., Jakovics, A., Baake, E. & Nacke, B., 2014, 9th PAMIR International Conference "Thermo Acoustic and Space Technologies": Riga, Latvia, June 16 - 20, 2014. Salaspils, p. 289-293

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  91. Published

    Melt flow patterns in metallurgical MHD devices with combined inductive and conductive power supply

    Pavlovs, S., Jakovičs, A., Baake, E. & Nacke, B., 2014, In: Magnetohydrodynamics. 50, 3, p. 303-315 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  92. Published

    Multi-objective optimisation of induction heaters design based on numerical coupled field analysis

    Pleshivtseva, Y., Di Barba, P., Rapoport, E., Nacke, B., Nikanorov, A., Lupi, S., Sieni, E. & Forzan, M., 2014, In: International Journal of Microstructure and Materials Properties. 9, 6, p. 532-551 20 p.

    Research output: Contribution to journal › Article › Research › peer review

  93. Published

    Multi-objective optimization as an innovative method to design induction heaters

    Pleshivtseva, Y., Di Barba, P., Rapoport, E., Nacke, B., Nikanorov, A., Forzan, M., Lupi, S. & Sieni, E., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 127-136

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  94. Published

    Nanoporous glasses with magnetic properties as a base of high-frequency multifunctional device making

    Naberezhnov, A., Rudskoy, A. I., Golosovsky, I., Nizhankovskii, V., Filimonov, A. V. & Nacke, B., 2014, Internet of Things, Smart Spaces, and Next Generation Networks and Systems: 14th International Conference, NEW2AN 2014 and 7th Conference, ruSMART 2014, Proceedings. Cham: Springer Verlag, p. 459-466 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8638).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  95. Published

    Numerical and experimental investigations of induction assisted GMA-laser hybrid welding

    Schaumann, P., Collmann, M., Schülbe, H., Neumeyer, J., Nacke, B., Lahdo, R., Seffer, O., Springer, A. & Kaierle, S., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 251-258

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  96. Published

    Numerical modeling of melt circulation in industrial-size furnaces with power supply by inductor and over electrodes

    Pavlovs, S., Jakovics, A., Baake, E., Nacke, B. & Sushkovs, V., 2014, Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014. Hannover, p. 363-369

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  97. Published

    Numerical modelling of gas bubble dynamics in liquid metal in applied DC magnetic field

    Tucs, A., Spitans, S., Jakovics, A. & Baake, E., 2014, 9th PAMIR International Conference "Thermo Acoustic and Space Technologies": Riga, Latvia, June 16 - 20, 2014. p. 266-270

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  98. Published

    Numerical simulation of low-frequency pulsed electromagnetic force influence on the melt flow in induction crucible furnace

    Musaeva, D., Ilin, V., Baake, E. & Geža, V., 2014, 9th International Conference on Fundamental and Applied MHD, Thermo Acoustic and and Space Technologies: Riga, Latvia, June 16 - 20, 2014. Grenoble, p. 232-236

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  99. Published

    Proceedings of the International Scientific Colloquium "Modelling for Electromagnetic Processing": Hannover, September 16 - 19, 2014

    Baake, E. (Editor) & Nacke, B. (Editor), 2014, Hannover. 496 p.

    Research output: Book/Report › Conference proceeding › Research

  100. Published

    Process design for inductive surface hardening using an inverse numerical approach

    Schlesselmann, D., Yu, Z., Krause, C., Boyarkin, V. & Nacke, B., 2014, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 12, 4, p. 65-71

    Research output: Contribution to journal › Article › Research

  101. Published

    Prozessauslegung für das induktive Randschichthärten mittels inverser numerischer Methoden

    Schlesselmann, D., Yu, Z., Krause, C., Boyarkin, V. & Nacke, B., 2014, In: Elektrowärme international (EWI). 725, 3, p. 85-91 7 p.

    Research output: Contribution to journal › Article › Research

  102. Published

    Research at the Institute of Electrotechnology in the field of induction heating

    Nacke, B. & Baake, E., 2014, p. 4-9.

    Research output: Working paper/Preprint › Working paper/Discussion paper

  103. 2013

  104. Published

    Multi-objective optimisation of induction heating processes: Methods of the problem solution and examples based on benchmark model

    Di Barba, P., Pleshivtseva, Y., Rapoport, E., Forzan, M., Lupi, S., Sieni, E., Nacke, B. & Nikanorov, A., 8 Oct 2013, In: International Journal of Microstructure and Materials Properties. 8, 4-5, p. 357-372 16 p.

    Research output: Contribution to journal › Article › Research › peer review

  105. Published

    Numerical modeling of free surface dynamics of melt in an alternate electromagnetic field: Part I. Implementation and verification of model

    Spitans, S., Jakovics, A., Baake, E. & Nacke, B., 16 Feb 2013, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 44, 3, p. 593-605 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  106. Published

    A new approach for coupled simulation of liquid metal flow, free surface dynamics and electromagnetic field in induction furnaces

    Spitans, S., Baake, E. & Jakovics, A., 2013, In: Elektrowärme international (EWI). 71, 4, p. 25-28

    Research output: Contribution to journal › Article › Research

  107. Published

    Anomalies of joule heat, thermal and turbulent flow fields in clogging industrial channel induction furnaces

    Pavlovs, S., Jakovics, A., Bosnyaks, D., Nacke, B. & Baake, E., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. 29-36

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  108. Published

    Anwendungen der numerischen Simulation des induktiven Randschichthärtens

    Schlesselmann, D. & Nacke, B., 2013, In: Elektrowärme international (EWI). 71, 3, p. 89-94

    Research output: Contribution to journal › Article › Research

  109. Published

    Approaches for numerical simulation of high frequency tube welding process

    Nikanorov, A., Baake, E., Brauer, H. & Weil, C., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. 647-654

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  110. Published

    Development, verification and application of numerical model for coupled free surface and liquid metal flow calculation in EM field

    Spitans, S., Jakovics, A., Baake, E. & Nacke, B., 2013, Computational Methods in Multiphase Flow VII. Brebbia, C. A. & Vorobieff, P. (eds.). WITPress, Vol. 79. p. 49-61 13 p. (WIT Transactions on Engineering Sciences; vol. 79).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  111. Published

    Development, verification and application of numerical model for coupled free surface and liquid metal flow calculation in EM field978-88-89884-25-6

    Spitans, S., Baake, E., Jakovics, A. & Nacke, B., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. 279-286

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  112. Published

    Einsparung von Energie und CO2 durch elektrothermische Technologien

    Baake, E. & Ubbenjans, B., 2013, In: Elektrowärme international (EWI). 71, 2, p. 91-95

    Research output: Contribution to journal › Article › Research

  113. Published

    Elektrothermische Verfahren

    Nacke, B. & Baake, E., 2013, Handbuch industrielle Wärmetechnik: Grundlagen, Berechnungen, Verfahren. 5. [überarb.] Aufl. ed. Essen, p. 265-330

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  114. Published

    Experimental and LES-based Euler-Lagrange numerical investigation of the particle laden EM induced recirculated turbulent flow class

    Scepanskis, M., Jakovics, A., Baake, E. & Nacke, B., 2013.

    Research output: Contribution to conference › Paper › Research

  115. Published

    Heat and mass transfer in inductive skull melting of glasses and oxides

    Nacke, B., Niemann, B. & Schlesselmann, D., 2013, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 11, 2, p. 109-114

    Research output: Contribution to journal › Article › Research

  116. Published

    Implementation and verification of numerical model for gas bubble dynamics in electroconductive fluid

    Tucs, A., Spitans, S., Jakovics, A., Baake, E. & Nacke, B., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. 623-630

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  117. Published

    Induction assisted gma-laser hybrid welding of high-strength fine- grain structural steels

    Lahdo, R., Seffer, O., Springer, A., Kaierle, S., Overmeyer, L., Collmann, M., Schaumann, P., Neumeyer, J., Schülbe, H. & Nacke, B., 2013, p. 228-236. 9 p.

    Research output: Contribution to conference › Paper › Research › peer review

  118. Published

    Institute of Electrotechnology of the Leibniz Universität Hannover (ETP)

    Nacke, B. & Baake, E., 2013, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 11, 2, p. 121-128

    Research output: Contribution to journal › Article › Research

  119. Published

    Multi-objektive optimization for advanced design of induction through heaters

    Di Barba, P., Pleshivtseva, Y., Rapaport, E., Forzan, M., Lupi, S., Sieni, E., Nacke, B. & Nikanorov, A., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. 507-514

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  120. Published

    New technology for electromagnetic levitation melting of metals

    Baake, E., Spitans, S. & Jakovics, A., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. P30

    Research output: Chapter in book/report/conference proceeding › Other contribution in a book, report, anthology or conference proceeding › Research

  121. Published

    Numerical calculation and comparison of temperature profiles and martensite microstructures in induction hardening processes

    Schlesselmann, D., Nikanorov, A., Nacke, B., Galunin, S., Schön, M. & Yu, Z., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. 127-134

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  122. Published

    Numerical simulation and investigation of electromagnetic and thermal dynamics for induction through heaters

    Di Barba, P., Pleshivtseva, Y., Rapaport, E., Forzan, M., Lupi, S., Sieni, E., Nacke, B. & Nikanorov, A., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing : HES-13 : International Conference on Heating by Electromagnetic Sources: Padua, May 21-24, 2013. Padova, p. 507-514

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  123. Published

    Numerical simulation of induction systems for heating by rotation with controlled temperature distribution

    Muratov, A., Galunin, S., Blinov, K., Nikanorov, A. & Nacke, B., 2013, Induction, dielectric and microwaves, conduction & electromagnetic processing: HES-13 : International Conference on Heating by Electromagnetic Sources : Padua, May 21-24, 2013. Padova, p. 371-376

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  124. Published

    Potentials for saving energy in Europe by the use of electrothermal technologies

    Baake, E., 2013, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 4, p. 69-74

    Research output: Contribution to journal › Article › Research

  125. Published

    Untersuchung und Verbesserung des Betriebsverhaltens von Induktionsrinnenöfen durch Anwendung der Computersimulation

    Baake, E. & Jakovics, A., 2013, In: Giesserei : die Zeitschrift für Technik, Innovation und Management. 100, 7, p. 42-47

    Research output: Contribution to journal › Article › Research

  126. Published

    Wärme- und Stofftransport beim induktiven Schmelzen von Gläsern und Oxiden

    Nacke, B., Niemann, B. & Schlesselmann, D., 2013, In: Elektrowärme international (EWI). 71, 1, p. 71-76

    Research output: Contribution to journal › Article › Research

  127. Published

    УПРАВЛЕНИЕ ФРОНТОМ КРИСТАЛЛИЗАЦИИ РАСПЛАВА ПРИ НЕПРЕРЫВНО-ПОСЛЕДОВАТЕЛЬНОЙ ЗОННОЙ ПЛАВКЕ В ИНДУКЦИОННОЙ ПЕЧИ С ХОЛОДНЫМ ТИГЛЕМ

    Maximenko, M. Y., Pozniak, I., Shatunov, A. N., Pechenkov, A., Kichigin, V. & Maksimov, A. I., 2013, In: Proceedings of Saint Petersburg Electrotechnical University Journal. 2013, 3, p. 73-78

    Research output: Contribution to journal › Article › Research

  128. 2012

  129. Published

    New method and devices for electromagnetic drip-and leakage-free levitation melting

    Peşteanu, O. & Baake, E., 15 May 2012, In: ISIJ international. 52, 5, p. 937-938 2 p.

    Research output: Contribution to journal › Article › Research › peer review

  130. Published

    Analysis of the oscillating behaviour of solid inclusions in induction crucible furnaces

    Ščepanskis, M., Jakovičs, A., Baake, E. & Nacke, B., 2012, In: Magnetohydrodynamics. 48, 4, p. 677-686 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  131. Published

    Electrothermal Processes

    Nacke, B. & Baake, E., 2012, Handbook of thermoprocessing technologies: Fundamentals, processes, calculations. 2., completely rev. ed. ed. Essen, Vol. 1. p. 244-316

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  132. Published

    Energy Balances and Energy Efficiency for Industrial Furnaces

    Pfeifer, H., Baake, E. & Nacke, B., 2012, Handbook of thermoprocessing technologies: Fundamentals, processes, calculations. 2., completely rev. ed. ed. Essen, Vol. 1. p. 318-362

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  133. Published

    Hybrid processes in electrotechnology

    Neumeyer, J., Schülbe, H. & Nacke, B., 2012, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 10, 4, p. 63-66

    Research output: Contribution to journal › Article › Research

  134. Published

    Hybridprozesse in der Elektroprozesstechnik

    Neumeyer, J., Schülbe, H. & Nacke, B., 2012, In: Elektrowärme international (EWI). 2012, 3

    Research output: Contribution to journal › Article › Research

  135. Published

    Hybrid-Verfahren in der Elektroprozesstechnik

    Neumeyer, J., Schülbe, H. & Nacke, B., 2012, In: Elektrowärme international (EWI). 2012, 3, p. 77-80

    Research output: Contribution to journal › Article › Research

  136. Published

    Introduction

    Pfeifer, H. & Nacke, B., 2012, Handbook of thermoprocessing technologies: Fundamentals, processes, calculations. 2., completely rev. ed. ed. Essen, Vol. 1. p. 2-27

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  137. Published

    Melting

    Dötsch, E., Nacke, B. & Hegeler, H., 2012, Handbook of thermoprocessing technologies. 2., completely rev. ed. ed. Essen, Vol. 1. p. 30-57

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  138. Published

    Redistribution of solid inclusions in the turbulent flow of metallurgical induction furnaces

    Scepanskis, M., Jakovics, A., Nacke, B. & Baake, E., 2012, Proceedings of the Seventh International Symposium THMT-12. On Turbulence Heat and Mass Transfer: 2012, 24-27 September, Palermo, Italy. p. 974-983 10 p. (Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  139. Published

    Two-frequency method and devices for drip- and leackage-free electromagnetic levitation melting

    Pesteanu, O., Baake, E., Köppen, A. & Lohan, D., 2012, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2012, 2, p. 96-100

    Research output: Contribution to journal › Article › Research

  140. Published

    Untersuchung und Optimierung des Betriebsverhaltens von Induktionsrinnenöfen durch Anwendung der Computersimulation

    Baake, E., 2012, In: Giesserei : die Zeitschrift für Technik, Innovation und Management. 99, p. 97-100

    Research output: Contribution to journal › Article › Research

  141. 2011

  142. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 12: Funkenerosion

    Baake, E., Dec 2011, In: Elektrowärme international (EWI). 69, 4, p. 387-389 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  143. Published

    Influence of the channel design on the heat and mass exchange of induction channel furnace

    Baake, E., Jakovics, A., Pavlovs, S. & Kirpo, M., 13 Sept 2011, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 30, 5, p. 1637-1650 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  144. Published

    Numerical simulation and investigation of induction through-heaters in dynamic operation mode

    Blinov, K., Nacke, B., Klöpzig, M. & Nikanorov, A., 13 Sept 2011, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 30, 5, p. 1539-1549 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  145. Published

    Numerical simulation of electromagnetic stirring in continuous casting of wires

    Turewicz, P., Baake, E. & Umbrashko, A., 13 Sept 2011, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 30, 5, p. 1499-1506 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  146. Published

    Selected papers from HES 2010

    Dughiero, F., Baake, E. & Forzan, M., 13 Sept 2011, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 30, 5, p. 141-145 5 p.

    Research output: Contribution to journal › Article › Research › peer review

  147. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 11: Mikrowellenerwärmung

    Baake, E., Sept 2011, In: Elektrowärme international (EWI). 69, 3, p. 301-303 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  148. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 10: Lichtbogenerwärmung

    Baake, E., Jun 2011, In: Elektrowärme international (EWI). 67, 2, p. 175-177 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  149. Published

    The multicell volume of fluid (MC-VOF) method for the free surface simulation of MFD flows. part I: Mathematical model

    Peşteanu, O. & Baake, E., 13 May 2011, In: ISIJ international. 51, 5, p. 707-713 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  150. Published

    The multicell volume of fluid (MC-VOF) method for the free surface simulation of MFD flows. Part II: Experimental verifications and results

    Peşteanu, O. & Baake, E., 13 May 2011, In: ISIJ international. 51, 5, p. 714-721 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  151. Published

    Grundlagen und Anwendungen elektrothermischer Verfahren: Folge 9: Indirekte Widerstandserwärmung

    Baake, E., Mar 2011, In: Elektrowärme international (EWI). 69, 1, p. 61-63 3 p.

    Research output: Contribution to journal › Article › Transfer › peer review

  152. Published

    Beitrag zur numerischen und experimentellen Untersuchung der elektromagnetischen Levitation flüssiger Metalle

    Pesteanu, O. & Baake, E., 2011, Workshop Elektroprozesstechnik: 06. - 07. Oktober 2011, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  153. Published

    Beitrag zur vereinfachten Berechnung der freien Oberflächen induktiv levitierter Metallschmelzen

    Pesteanu, O. & Baake, E., 2011, Workshop Elektroprozesstechnik: 06. - 07. Oktober 2011, Seminar- und Ferienhaus "Zur Talsperre", Ilmenau, Ortsteil Heyda : Tagungsband. Ilmenau

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  154. Published

    Connecting OpenFOAM with an External Electromagnetic FDM Solver for Magnetofluiddynamic Simulations

    Baake, E., Turewicz, P. & Bibani, M. B. C., 2011, p. 23-24.

    Research output: Contribution to conference › Abstract › Research

  155. Published

    Contribution to the study of molten metal free surface flows in electromagnetic field

    Pesteanu, O. & Baake, E., 2011, Proceedings of the 8th International PAMIR Conference on Fundamental and Applied MHD: Borgo, Corsica, France, September 5 - 9, 2011. Grenoble, p. 323-327

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  156. Published

    Development of solidParticle Library for the Particle Transfer in EM Induced Turbulent Flows

    Scepanskis, M., Jakovics, A., Baake, E. & Nacke, B., 2011, p. 21-22.

    Research output: Contribution to conference › Abstract › Research

  157. Published

    Energieeffizienz in der elektrothermischen Prozesstechnik

    Baake, E. & Beneke, F., 2011, Prozesswärme: Energieeffizienz in der industriellen Thermoprozesstechnik; eine Sonderpublikation der Zeitschriften Gaswärme International und Elektrowärme international. Essen, p. 309-318

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  158. Published

    Energieeinsparpotenzial beim induktiven Schmelzen und Erwärmen von Metallen durch Verringerung der Spulenverluste: Teil 1

    Rinnhofer, H. & Baake, E., 2011, In: Elektrowärme international (EWI). 69, 2, p. 141-145

    Research output: Contribution to journal › Article › Research

  159. Published

    Energieeinsparpotenzial beim induktiven Schmelzen und Erwärmen von Metallen durch Verringerung der Spulenverluste: Teil 2

    Rinnhofer, H., Baake, E. & Trauzeddel, D., 2011, In: Elektrowärme international (EWI). 69, 4, p. 355-358

    Research output: Contribution to journal › Article › Research

  160. Published

    Extending the process limits of warm forging by intermediate induction heating

    Mach, M., Baake, E., Köhler, D. & Walther, T., 2011, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 9, 2

    Research output: Contribution to journal › Article › Research

  161. Published

    Grundlagen des induktiven Schmelzens

    Baake, E., 2011, In: Giesserei : die Zeitschrift für Technik, Innovation und Management. 98, 5, p. 70-73

    Research output: Contribution to journal › Article › Research

  162. Published

    Im Profil: Institut für Elektroprozesstechnik der Leibniz Universität Hannover

    Baake, E. & Nacke, B., 2011, In: Elektrowärme international (EWI). 69, 2, p. 178-184

    Research output: Contribution to journal › Article › Research

  163. Published

    Induction Heat Treatment for Press Hardening Process

    Schülbe, H., Jestremski, M. & Nacke, B., 2011, Hot sheet metal forming of high-performance steel - CHS2: 3rd international conference ; June 13 - 17, 2011, Kassel, Germany ; proceedings. Auerbach, p. 481-490

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  164. Published

    Induktionskochfelder - Eine heiße Sache? Gewusst wie

    Wipprecht, S., 2011, In: Elektrowärme international (EWI). 2011, 3, p. 253

    Research output: Contribution to journal › Article › Research

  165. Published

    Induktive Zwischenerwärmung zur Erweiterung der Prozessgrenzen von Umformverfahren im Halbwarm-Temperaturbereich

    Mach, M., Baake, E., Köhler, D. & Walther, T., 2011, In: Elektrowärme international (EWI). 69, 1, p. 51-55

    Research output: Contribution to journal › Article › Research

  166. Published

    Induktiv unterstütztes Hybridschweißen: Neues Projekt: Leistungsstarkes Fügen mit induktiver Unterstützung

    Neumeyer, J., Schülbe, H. & Nacke, B., 2011, 5 p. Hannover

    Research output: Other contribution › Other publication › Research

  167. Published

    LES modelling of turbulent flow, heat exchange and particle transport in industrial induction channel furnaces

    Pavlovs, S., Jakovičs, A., Baake, E., Nacke, B. & Kirpo, M., 2011, In: Magnetohydrodynamics. 47, 4, p. 399-412 14 p.

    Research output: Contribution to journal › Article › Research › peer review

Previous 1 2 3 4 5 Next