Loading [MathJax]/extensions/tex2jax.js
Organisation placeholder image, no image found

Institute of Electrothermic Process Engineering

Organisational unit: Institute

Type of address: Visitor addres
Wilhelm-Busch-Straße 4
30167
Hannover
1 - 160 out of 777Page size: 160
Order:

Publications

  1. 2025

  2. Published

    Enhanced mechanical properties of Nb-18.7Si alloy by addition of ceramic nano particles for microstructural control

    Holzmann, E., Barienti, K., Guglielmi, M., Baake, E., Herbst, S. & Maier, H. J., Jan 2025, In: INTERMETALLICS. 176, 108577.

    Research output: Contribution to journal › Article › Research › peer review

  3. Published

    Institut für Elektroprozesstechnik der Leibniz Universität Hannover

    Baake, E., 2025, Hybrid Heating. 1 ed. p. 96-104

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  4. 2024

  5. Published

    Advanced designing of induction heating systems with magnetic flux concentrators

    Nikanorov, A., Baake, E., Niedzwiecki, I. & Zhou, Y., Oct 2024, Proceedings of the XXth International UIE-Congress Electrification of Industrial Thermal and Manufacturing Processes, Nice (France). p. 72-73

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  6. E-pub ahead of print

    Design of induction heating systems with soft magnetic composites

    Zhou, Y., Baake, E., Niedzwiecki, I. & Nikanorov, A., Oct 2024, (E-pub ahead of print) Proceedings of the 11th International Conference on Electromagnetic Processing of Materials (EPM2024) Shanghai (China). p. 73-75

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  7. E-pub ahead of print

    Electrification: A sustainable solution for defossilization of thermoprocess technologies

    Baake, E. & Niedzwiecki, I., Oct 2024, (E-pub ahead of print) A sustainable solution for defossilization of thermoprocess technologies. p. 58-59

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  8. E-pub ahead of print

    Evaluation of the substitution potential of fossil burners by resistive heating elements in existing thermoprocessing applications

    Niedzwiecki, I. & Baake, E., Oct 2024, (E-pub ahead of print) Proceedings of the XXth International UIE-Congress Electrification of Industrial Thermal and Manufacturing Processes, Nice (France). p. 43-44

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  9. E-pub ahead of print

    Numerical and Experimental Study of an Alloying Process for Niobium-MASC Composites in Induction Cold Crucible Furnace

    Baake, E., Guglielmi, M., Köppen, A., Holzmann, E. & Herbst, S., Oct 2024, (E-pub ahead of print) In: Proceedings of the 11th International Conference on Electromagnetic Processing of Materials (EPM2024) Shanghai (China). p. 10-12

    Research output: Contribution to journal › Article › Research › peer review

  10. Published

    Homogeneity Improvement of Multicomponent Alloys in Induction Cold Crucible Furnace with Multiphysical Simulations

    Guglielmi, M., Baake, E., Köppen, A. & Herbst, S., Sept 2024, Proceedings of the 13th PAMIR International Conference: Fundamental and Applied MHD. p. 26-30

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  11. Published

    Induction Melting in Cold Crucible Furnace for the Production of Components in Turbine Applications

    Baake, E., Guglielmi, M., Köppen, A., Holzmann, E. & Herbst, S., Sept 2024, Proceedings of the 13th PAMIR International Conference: Fundamental and Applied MHD. p. 41-45

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  12. Published

    Liquid Metal Free Surface Instabilities in Transverse AC Magnetic Field

    Dzelme, V., Jakovics, A. & Baake, E., Sept 2024, Proceedings of the 13th PAMIR International Conference - Fundamental and Applied MHD. p. 219-223

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  13. E-pub ahead of print

    Das Interesse der Industrie an der Elektrifizierung ist sehr groß (Interview)

    Baake, E., 2024, (E-pub ahead of print) In: Prozesswärme. p. 20-21

    Research output: Contribution to journal › Article › Research › peer review

  14. 2023

  15. Published

    An intelligence parameter classification approach for energy storage and natural convection and heat transfer of nano-encapsulated phase change material: Deep neural networks

    Ghalambaz, M., Edalatifar, M., Moradi Maryamnegari, S. & Sheremet, M., Sept 2023, In: Neural Computing and Applications. 35, 27, p. 19719-19727 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  16. Accepted/In press

    Numerical simulation for advanced designing of induction heat treatment systems with magnetic flux concentrators. Proceedings of the HES-23 International Conference on Heating by Electromagnetic Sources

    Nikanorov, A., Baake, E. & Niedzwiecki, I., May 2023, (Accepted/In press) p. 10-12.

    Research output: Contribution to conference › Paper › Research › peer review

  17. Published

    Effects of thermal boundary conditions on the performance of spray dryers

    Moradi Maryamnegari, S., Ashrafizadeh, A., Baake, E. & Guglielmi, M., Feb 2023, In: Journal of food engineering. 338, 111250.

    Research output: Contribution to journal › Article › Research › peer review

  18. Accepted/In press

    Institut für Elektroprozesstechnik der Leibniz Universität Hannover

    Baake, E., 7 Jan 2023, (Accepted/In press) In: Prozesswärme. 3-4, p. 88-96

    Research output: Contribution to journal › Article › Research › peer review

  19. Published

    Analysis of an alloying process for NBSI-based composites in a cold crucible induction furnace with the use of the particle tracing method

    Guglielmi, M., Baake, E., Köppen, A., Holzmann, E. & Herbst, S., 2023, In: Magnetohydrodynamics. 59, 3-4, p. 425-435 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  20. Accepted/In press

    Dynamics of liquid metal surface in AC magnetic field

    Dzelme, V., Jakovics, A. & Baake, E., 2023, (Accepted/In press) Proceedings of the HES-23 International Conference on Heating by Electromagnetic Sources. Padua, May 10-12.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  21. Accepted/In press

    Electromagnetic control of the direct strip casting process. Proceedings of the IX International Scientific Colloquium Modelling for Material Processing

    Dzelme, V., Jakovics, A. & Baake, E., 2023, (Accepted/In press) p. 12.

    Research output: Contribution to conference › Paper › Research › peer review

  22. Accepted/In press

    Experimental and simulative studies on the electrothermal behavior of carbon fiber resistive heating elements

    Sufis, N., Niedzwiecki, I., Nikanorov, A. & Baake, E., 2023, (Accepted/In press) Proceedings of the IX International Scientific Colloquium Modelling for Material Processing. Riga, September18-19. p. 29-34

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  23. Accepted/In press

    Future potentials and challenges for decarbonization of industrial heating processes using electrotechnologies

    Baake, E., 2023, (Accepted/In press) Proceedings of the HES-23 International Conference on Heating by Electromagnetic Sources. Padua, May 10-12.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  24. Accepted/In press

    Innovative NbSi composites: investigation and development of an alloying process using cold crucible induction furnace

    Baake, E., Guglielmi, M., Köppen, A., Holzmann, E. & Herbst, S., 2023, (Accepted/In press) Proceedings of the IX International Scientific Colloquium Modelling for Material Processing. Riga, September18-19. p. 4-9

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  25. Accepted/In press

    Inverse identification of SMC material properties: innovative implementation of flux concentrator losses in numerical design of inductive systems

    Niedzwiecki, I., Nikanorov, A., Baake, E. & Sufis, N., 2023, (Accepted/In press) Proceedings of the IX International Scientific Colloquium Modelling for Material Processing. Riga, September18-19. p. 42-45

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  26. Accepted/In press

    Investigation of an alloying process for NbSi-based composites in cold wall crucible furnace

    Guglielmi, M., Holzmann, E., Köppen, A., Baake, E. & Herbst, S., 2023, (Accepted/In press) Proceedings of the HES-23 International Conference on Heating by Electromagnetic Sources. Padua, May 10-12.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  27. 2022

  28. Published

    Dynamics of liquid metal layer in transverse AC magnetic field

    Dzelme, V., Jakovics, A. & Baake, E., 2022, In: Magnetohydrodynamics. 58, 1-2, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  29. Published

    Hierarchische Auslegung induktiver Querfelderwärmer für quasistationäre und dynamische Prozesse

    Ennen, M., 2022, Garbsen.

    Research output: Thesis › Doctoral thesis

  30. Published

    Induction melting in a cold crucible furnace applied to innovative high-melting temperature metals

    Guglielmi, M., Baake, E., Köppen, A., Holzmann, E., Herbst, S. & Moradi Maryamnegari, S., 2022, In: Magnetohydrodynamics. 58, 4, p. 523-532 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  31. Published

    Recent Research Projects in EPM at the Institute of Electrotechnology of the Leibniz University Hannover

    Baake, E., 2022, Proceedings of the International Workshop on Electromagnetic Metallurgy and Material Science with High Magnetic Field. p. 23-25

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  32. Published

    Simulation of binary alloy columnar solidification in the presence of EM forced convection

    Shvydkiy, E., Smolyanov, I. & Baake, E., 2022, In: Magnetohydrodynamics. 58, 1-2, p. 33-45 13 p.

    Research output: Contribution to journal › Article › Research › peer review

  33. 2021

  34. Published

    Verification of the code to calculate duct flow affected by external magnetic field

    Smolyanov, I. A., Shmakov, E. I., Baake, E. & Guglielmi, M., 30 Sept 2021, In: Computational Continuum Mechanics. 14, 3, p. 322-332 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  35. Published

    Induction tempering of surface hardenend components

    Nacke, B. & Baldan, M., Sept 2021, Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing: Plzen (Czech Republic), September 2-3.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  36. Published

    Liquid metal layer dynamics in transverse alternating magnetic field

    Dzelme, V., Jakovics, A. & Baake, E., Sept 2021, Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing: Plzen (Czech Republic), September 2-3.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  37. Published

    Optimal programmed control of mass induction heating with guaranteed quality

    Nikanorov, A., Pleshivtseva, Y., Popov, A., Baldan, M. & Nacke, B., Sept 2021, Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing: Plzen (Czech Republic), September 2-3. p. 197-202

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  38. Published

    Tailored heating of billets for hot forming using an induction heating approach

    Ennen, M., Niedzwiecki, I. & Baake, E., Sept 2021, Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing: Plzen (Czech Republic), September 2-3.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  39. Published

    Time-optimal feedback system with identifier to control induction heating process

    Pleshivtseva, Y., Levin, I., Nacke, B., Ennen, M. & Nikanorov, A., Sept 2021, Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing: Plzen (Czech Republic), September 2-3. p. 197-202

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  40. Published

    Comparison of numerical approaches and techniques to simulate MHD duct flows

    Smolyanov, I., Shmakov, E. & Baake, E., Jun 2021, Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. p. 197-202

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  41. Published

    Electromagnetic forming of a liquid metal layer

    Dzelme, V., Jakovics, A. & Baake, E., Jun 2021, Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc., p. 77-84

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  42. Published

    Investigation of an electromagnetic stirring process by parallel numerical simulations in Ansys Fluent and OpenFoam

    Guglielmi, M., Smolyanov, I., Vencels, J. & Baake, E., Jun 2021, Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc., p. 142-147

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  43. Published

    Numerical investigation of electromagnetic non-linear effects in high frequency longitudinal tube-welding systems

    Baake, E., Nikanorov, A. & Ebel, W., Jun 2021, Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc., p. 1-6

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  44. Published

    Optimization of an electromagnetic stirring process by pulsed travelling magnetic field

    Guglielmi, M., Baake, E., Niedzwiecki, I. & Sufis, N., Jun 2021, Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc., p. 19-24

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  45. Published

    Simulation of binary alloy columnar solidification in presence of EM driven flow

    Shvydkiy, E., Smolyanov, I. & Baake, E., Jun 2021, Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM 2021: Riga, June 14-16. Institute of Electrical and Electronics Engineers Inc., p. 54-58

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  46. Published

    Magnetic Properties Identification by Using a Bi-Objective Optimal Multi-Fidelity Neural Network

    Baldan, M., Barba, P. D. & Nacke, B., 17 May 2021, In: IEEE transactions on magnetics. 57, 6

    Research output: Contribution to journal › Article › Research › peer review

  47. Published

    Solving 1D non-linear magneto quasi-static Maxwell's equations using neural networks

    Baldan, M., Baldan, G. & Nacke, B., 17 Feb 2021, In: IET Science, Measurement and Technology. 15, 2, p. 204-217 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  48. Published

    Dynamische Querfelderwärmung: Erzeugung maßgeschneiderter Temperaturfelder in Flachstählen

    Ennen, M., Nacke, B. & Baake, E., 11 Feb 2021, Prozesswärme . 5 p. 00543_2021_01_05

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  49. Published

    Design of induction hardening-tempering processes by means of multi-physical models, neural networks and multi-fidelity parallel optimization

    Baldan, M., 2021, Garbsen. 170 p.

    Research output: Thesis › Doctoral thesis

  50. Published

    Design of induction tempering of surface hardenend components

    Baldan, M. & Nacke, B., 2021, Proceedings of 10th international conference on Electromagnetic Processing of Materials EPM. IOP Publishing Ltd., Vol. 1223. p. 9-14 6 p. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  51. Published

    Maßgeschneiderte Bauteilerwärmung für die Massivumformung: Ein Vergleich zwischen direkten und indirekten Erwärmungsverfahren

    Ennen, M., Thie, S., Schmitz, N., Baake, E., Hauch, J. & Pfeifer, H., 2021, Massivumformung. Institute of Electrical and Electronics Engineers Inc., p. 56 – 61

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  52. Published

    Numerische Modellierung und Design des induktiven Schweißprozesses von plattierten Rohren

    Ebel, W., 2021, Garbsen. 127 p.

    Research output: Thesis › Doctoral thesis

  53. Published

    Recent development and future trends in Electrotechnology

    Baake, E. & Nacke, B., 2021, Proceeding of XIX International UIE-Congress on Electrotechnologies for Material Processing, Plzen (Czech Republic), September 2-3.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  54. 2020

  55. Published

    Numerical Modeling and Optimization of Electrode Induction Melting for Inert Gas Atomization (EIGA)

    Spitans, S., Franz, H. & Baake, E., Oct 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51, 5, p. 1918-1927 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  56. Published

    Electromagnetic and chemical numerical coupling method in bubbly liquid metal flows for optimization of carbon dioxide free production of hydrogen

    Fehling, T. & Baake, E., 1 Sept 2020, In: Magnetohydrodynamics. 56, 2-3, p. 289-297 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  57. Published

    Improving the Accuracy of FE Simulations of Induction Tempering Toward a Microstructure-Dependent Electromagnetic Model

    Baldan, M., Stolte, M. H., Nacke, B. & Nurnberger, F., 5 Aug 2020, In: IEEE transactions on magnetics. 56, 10, 9159684.

    Research output: Contribution to journal › Article › Research › peer review

  58. Published

    Magnetic Properties of Two-Phase Borosilicate Glasses Containing β-Fe2O3 and Fe3O4 Nanoparticles

    Borisov, S. A., Naberezhnov, A. A., Nacke, B. & Nikanorov, A., Aug 2020, In: Technical physics letters. 46, 8, p. 808-811 4 p.

    Research output: Contribution to journal › Article › Research › peer review

  59. Published

    Additive manufactured magnetic flux concentrators for induction heating applications

    Steinberg, T., Baake, E., Kollenberg, W., Schultz, K. M., Leonhardt, A., Kräusel, V. & Walther, T., 8 Jul 2020, In: International Journal of Applied Electromagnetics and Mechanics. 63, S1, p. S31-S39

    Research output: Contribution to journal › Conference article › Research › peer review

  60. Published

    Liquid Metal Flow Under Traveling Magnetic Field—Solidification Simulation and Pulsating Flow Analysis

    Shvydkiy, E., Köppen, D. & Baake, E., 20 Apr 2020, In: Metals. 10, 4, 532.

    Research output: Contribution to journal › Article › Research › peer review

  61. Published

    Approaches for increasing the lifetime of single-shot coils

    Schubotz, S. & Nacke, B., 11 Mar 2020, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 39, 1, p. 166-176 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  62. Published

    A novel multi-surrogate multi-objective decision-making optimization algorithm in induction heating

    Baldan, M., Nikanorov, A. & Nacke, B., 7 Jan 2020, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 39, 1, p. 144-157 14 p.

    Research output: Contribution to journal › Article › Research

  63. Published

    Effective methods for optimal design of induction coils on example of surface hardening

    Pleshivtseva, Y., Baldan, M., Popov, A., Nikanorov, A., Rapoport, E. & Nacke, B., 7 Jan 2020, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 39, 1, p. 90-99 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  64. Published

    Energieeffizienz induktiver Härteanlagen

    Nacke, B., 2020, Buchbeitrag in Prozesswärme, Energieeffizienz in der industriellen Thermoprozesstechnik. p. 70-78

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

  65. Published

    Hybride Direkterwärmung von Metall-Kunststoff-Verbundbauteilen mittels induktiver und dielektrischer Erwärmung

    Mikulski, S., 2020, Garbsen. 163 p.

    Research output: Thesis › Doctoral thesis

  66. Published

    Liquid metal free surface deformation in electrically induced vertical flow

    Dzelme, V., Jakovics, A. & Baake, E., 2020, In: Magnetohydrodynamics. 56, 1, p. 67-74 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  67. Published

    Multiphysikalische Modellierung von Flüssigmetall-Zweiphasenströmungen unter Einfluss elektromagnetischer Felder

    Fehling, T., 2020, Garbsen. 211 p.

    Research output: Thesis › Doctoral thesis

  68. Published

    Numerical and experimental investigation of the skull melting process for continuous pouring of oxides

    Nacke, B., Fehling, T. & Pozniak, I., 2020, In: Magnetohydrodynamics. 56, 2-3, p. 299-306 8 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  69. Published

    The Institute of Electrotechnology of the Leibniz University Hannover

    Nacke, B. & Baake, E., 2020, In: Heat processing special. p. 64-71

    Research output: Contribution to journal › Article › Research › peer review

  70. Published

    Untersuchung einer gezielten Bauteilerwärmung für die Massivumformung

    Thie, S. (Contributor), Hauch, J. (Contributor), Schmitz, N., Pfeifer, H. (Contributor), Ennen, M. (Contributor) & Baake, E. (Contributor), 2020, In: Prozesswärme. 2020, 4, p. 38-45

    Research output: Contribution to journal › Article › Research › peer review

  71. 2019

  72. Published

    Recent scientific research on electrothermal metallurgical processes

    Baake, E. & Shpenst, V. A., 25 Dec 2019, In: Journal of Mining Institute. 240, p. 660-668 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  73. Published

    Design and control of electrotechnological systems: A multi-objective optimization approach

    Pleshivtseva, Y., Rapoport, E., Nacke, B., Nikanorov, A., Di Barba, P., Forzan, M., Sieni, E. & Lupi, S., 19 Dec 2019, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 39, 1, p. 239-247 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  74. Published

    Tailored heating of forging billets using induction and conduction heating approaches

    Schulze, M. & Baake, E., 16 Dec 2019, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 39, 1, p. 100 - 107 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  75. Published

    A parallel multi-fidelity optimization approach in induction hardening

    Baldan, M., Nikanorov, A. & Nacke, B., 29 Nov 2019, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 39, 1, p. 133-143 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  76. Published

    Hierarchical shape optimization of one-sided transverse flux heating induction coil

    Schulze, M., Nikanorov, A. & Nacke, B., 29 Nov 2019, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 39, 1, p. 73-80 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  77. E-pub ahead of print

    Low-temperature magnetostriction and distortions in the rare-earth Laves phases

    Politova, G., Ganin, M., Kaminskaya, T., Mikhailova, A., Nacke, B., Filimonov, A. & Burkhanov, G., 28 Nov 2019, (E-pub ahead of print) In: Journal of Physics: Conference Series. 1389, 1, 012097.

    Research output: Contribution to journal › Conference article › Research › peer review

  78. Published

    Analysis and design of induction liquid metal processes using advanced numerical modelling

    Baake, E., Spitans, S. & Jakovics, A., Sept 2019, 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP): Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 14-24 11 p. 8976777

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  79. Published

    Innovative Methods for Optimal Design of Complex Induction Heating Processes

    Nacke, B., Nikanorov, A. & Baldan, M., Sept 2019, 2019 XXI International Conference Complex System: Control and Modeling Problems (CSCMP) Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 25-34 10 p. 8976621

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  80. Published

    Numerical modeling of double high-frequency longitudinal welding of cladded pipes

    Baake, E., Nikanorov, A. & Ebel, W., Sept 2019, 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP): Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 199-202 4 p. 8976602

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  81. Published

    Optimal design of induction heating process for hot metal forming of steel blanks

    Nacke, B. & Dietrich, A., Sept 2019, 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP): Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 230-236 7 p. 8976825

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  82. Published

    Optimal design of magnetic flux concentrators in induction heating

    Baldan, M., Cetin, M., Nikanorov, A. & Nacke, B., Sept 2019, 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP) Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 203-207 5 p. 8976484

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  83. Published

    Three-Dimensional Numerical Model of a Double-Sided Electromagnetic Stirrer of a Traveling Magnetic Field

    Shvydkiy, E. & Baake, E., Sept 2019, 2019 XXI International Conference "Complex Systems: Control and Modeling Problems" (CSCMP): Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 249-251 3 p. 8976552

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  84. Published

    Simulation of solar cell performance based on in the field measured ambience parameters

    Wetzel, G., Krügener, J., Peibst, R., Dietrich, A., Nacke, B. & Osten, H., 27 Aug 2019, AIP Conference Proceedings: SiliconPV 2019 - 9th International Conference on Crystalline Silicon Photovoltaics. Dubois, S., Glunz, S., Verlinden, P., Rolf, B., Weeber, A., Hahn, G., Poortmans, M. & Ballif, C. (eds.). 1. ed. Leuven, 7 p. 020020. (AIP Conference Proceedings; vol. 2147).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  85. Published

    Design of Transverse Flux Induction Coils by using a Successive Optimization Strategy

    Schulze, M., Nikanorov, A. & Nacke, B., Aug 2019, 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, ISEF 2019: Proceedings. Institute of Electrical and Electronics Engineers Inc., 9097053

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  86. Published

    Institut für Elektroprozesstechnik der Leibniz Universität Hannover

    Nacke, B. & Baake, E., 19 Jun 2019, In: Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2019, 4, p. 147-154

    Research output: Contribution to journal › Article › Research

  87. Published

    Chaotic potential on the degenerated semiconductor surface

    Bondarenko, V. B., Davydov, S. N., Nacke, B. & Filimonov, A. V., 11 Jun 2019, In: Key Engineering Material:KEM. 806, p. 17-23 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  88. Published

    Magnetocaloric and structural studies of substituted Tb0.2Dy0.8-xGdxCo0.9Al0.1 laves phases alloys

    Politova, G., Kaminskaya, T., Mikhailova, A., Ganin, M., Alekseeva, O., Vanina, P., Nacke, B., Filimonov, A., Rudskoy, A. & Burkhanov, G., 11 Jun 2019, In: Key Engineering Material:KEM. 806, p. 136-141 6 p.

    Research output: Contribution to journal › Article › Research › peer review

  89. Published

    РАЗРАБОТКА ИНДУКЦИОННЫХ СИСТЕМ ДЛЯ НАГРЕВА ДИСКОВ

    Mannanov, E. R., Galunin, S. A., Nikanorov, A. N., Nacke, B. & Kozulina, T. P., Jun 2019, In: St. Petersburg State Polytechnical University Journal: Physics and Mathematics. 12, 2, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  90. Published

    A novel multiple surrogate multi-objective decision making optimization algorithm and its application in induction heating

    Baldan, M., Nacke, B. & Nikanorov, A., May 2019, Hannover

    Research output: Other contribution › Other publication › Research

  91. Published

    Numerical simulation, investigation and development of induction systems for heating of disks with complex profile

    Mannanov, E., Galunin, S., Yermekova, M., Nacke, B. & Nikanorov, A., 28 Feb 2019, 2019 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering, ElConRus 2019: Proceedings. Shaposhnikov, S. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 606-608 3 p. 8656912. (IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  92. Published

    A numerical method for electromagnetic and chemical coupling in liquid metal flow optimization for carbon dioxide free production of hydrogen

    Fehling, T. C. L. S. & Baake, E., 2019, Proceedings of the 11th PAMIR International Conference, Fundamental and Applied MHD. p. 292-296

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  93. Published

    A numerical method for electromagnetic and chemical coupling in liquid metal flow optimization for carbon dioxide free production of hydrogen

    Fehling, T. & Baake, E., 2019, 11th PAMIR international conference: Fundamental and Applied MHD. p. 292-296

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  94. Published

    Ferroelectric nanocomposites with governed interface on base of magnetic porous glasses

    Naberezhnov, A. A., Alekseeva, O. A., Golosovsky, I. V., Sysoeva, A. A., Vanina, P. Y., Nacke, B. & Nikanorov, A., 2019, In: Vide. Tehnologija. Resursi - Environment, Technology, Resources. 3, p. 172-176 5 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  95. Published

    Investigation of a double frequency application for high frequency longitudinal welding of cladded pipes

    Ebel, W., Kroll, M., Baake, E. & Nikanorov, A., 2019, In: Ėlektričestvo - ežemesjačnyj teoretičeskij i naučno-praktičeskij žurnal (Elektrizität - eine theoretische und wissenschaftlich-praktische Zeitschrift). 2019, 3, p. 60-64

    Research output: Contribution to journal › Article › Research

  96. Published

    Numerical modelling and optimization of the electrode induction melting for inert gas atomization (EIGA)

    Spitans, S., Franz, H. & Baake, E., 2019, Proceedings of the 11th PAMIR International Conference: Fundamentals and Applied MHD. p. 327-331

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  97. Published

    Simulation of solar cell performance based on in the field measureed ambience parameters

    Wetzel, G., Krügener, J., Peibst, R., Dietrich, A., Nacke, B. & Osten, H., 2019, SiliconPV 2019, the 9th International Conference on Crystalline Silicon Photovoltaics: Leuven, Belgium, 8-10 April 2019. Melville: AIP Publishing LLC, 020020. (AIP Conference Proceedings; vol. 2147).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  98. Published

    Stirring of melt during solidification process for effective grain fragmentation using pulsed electromagnetic fields

    Köppen, D., Baake, E. & Mrówka-Nowotnik, G., 2019, In: Ėlektričestvo - ežemesjačnyj teoretičeskij i naučno-praktičeskij žurnal (Elektrizität - eine theoretische und wissenschaftlich-praktische Zeitschrift). 2019, 6, p. 66-69

    Research output: Contribution to journal › Article › Research

  99. Published

    The Institute of Electrotechnology of the Leibniz University Hannover

    Nacke, B. & Baake, E., 2019, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 2019, 2, p. 117-124

    Research output: Contribution to journal › Article › Research

  100. Published

    Untersuchung und Optimierung der Lebensdauer von Hochleistungsinduktoren für das induktive Härten

    Schubotz, S., 2019, Garbsen.

    Research output: Thesis › Doctoral thesis

  101. 2018

  102. Published

    Properties and structure of magnetic alkali-borosilicate glasses prepared by induction melting

    Naberezhnov, A., Nacke, B., Nikanorov, A., Koroleva, E., Vanina, P., Alekseeva, O., Tomkovich, M. & Andreeva, N., 5 Dec 2018, VII International Conference: Functional Nanomaterials and High Purity Substances 1–5 October 2018, Suzdal, Russian Federation. Vol. 1134. 012043. (Journal of Physics: Conference Series).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  103. Published

    Application of Rechargeable Batteries of Electrical Vehicles as Time Dependent Storage Resource for the Public Electricity Grid

    Arafat, Z., Fehling, T., Kleiss, G. & Nacke, B., Nov 2018, In: Energy Procedia. 155, p. 478-491 14 p.

    Research output: Contribution to journal › Conference article › Research › peer review

  104. Published

    Design improvements for increasing lifetime of single-shot coils applied at rotating workpieces

    Schubotz, S. & Nacke, B., 13 Oct 2018, 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. (IOP Conference Series: Materials Science and Engineering; vol. 424).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  105. Published

    Design of an one-sided transverse flux induction coil by using a numerical optimization algorithm

    Schulze, M., Nikanorov, A. & Nacke, B., 13 Oct 2018, 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. 012065. (IOP Conference Series: Materials Science and Engineering; vol. 424).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  106. Published

    Hierarchical optimization approaches in designing surface hardening induction systems

    Baldan, M., Nikanorov, A. & Nacke, B., 13 Oct 2018, 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. 1 ed. Bristol: IOP Publishing Ltd., Vol. 424. 012067. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  107. Published

    Numerical and experimental study of liquid metal stirring by rotating permanent magnets

    Dzelme, V., Jakovics, A., Vencels, J., Köppen, D. & Baake, E., 13 Oct 2018, 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. Vol. 424. 012047. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  108. Published

    Potentials of single stage induction heating for press hardening of steel blanks

    Nacke, B. & Dietrich, A., 13 Oct 2018, 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. Vol. 424. 012058. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  109. Published

    Resonant pulsed electromagnetic stirring of melt for effective grain fragmentation

    Köppen, D., Baake, E., Gerstein, G., Mrówka-Nowotnik, G. & Jarczyk, G., 13 Oct 2018, 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. IOP Publishing Ltd., Vol. 424. 012036. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  110. Published

    Simulation of electrically induced vortical flows

    Dzelme, V., Jakovics, A., Chudnovsky, A. & Baake, E., 13 Oct 2018, 9th International Symposium on Electromagnetic Processing of Materials (EPM2018)14–18 October 2018, Hyogo, Japan. IOP Publishing Ltd., Vol. 424. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  111. Published

    Numerical investigation of a double frequency approach for longitudinal HF welding of cladded pipes

    Ebel, W., Kroll, M., Baake, E. & Nikanorov, A., Oct 2018, In: IOP Conference Series: Materials Science and Engineering. 424, 012069.

    Research output: Contribution to journal › Conference article › Research › peer review

  112. Published

    Numerical modelling of industrial scale high frequency welding of cladded pipes

    Ebel, W., Kroll, M., Nikanorov, A. & Baake, E., 25 Jul 2018, In: International Journal of Microstructure and Materials Properties. 13, 1-2, p. 27-38 12 p.

    Research output: Contribution to journal › Article › Research › peer review

  113. Published

    Optimal design of inductor addressed to a tailored heating forging process

    Baldan, M., Steinberg, T. & Baake, E., 25 Jul 2018, In: International Journal of Microstructure and Materials Properties. 13, 1-2, p. 39-53 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  114. Published

    Three-criteria numerical optimisation as a base for designing induction mass heating

    Pleshivtseva, Y., Rapoport, E., Nacke, B., Nikanorov, A., Di Barba, P., Sieni, E., Forzan, M. & Lupi, S., 24 Jul 2018, In: International Journal of Microstructure and Materials Properties. 13, 1-2, p. 54-72 19 p.

    Research output: Contribution to journal › Article › Research › peer review

  115. Published

    Numerical investigation of effects on blanks for press hardening process during longitudinal flux heating

    Dietrich, A. & Nacke, B., 8 May 2018, VIII International Scientific Colloquium on Modelling for Materials Processing 21–22 September 2017, Riga, Latvia. 012014. (IOP Conference Series: Materials Science and Engineering; vol. 355).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  116. Published

    Self-adaptive multimethod optimization applied to a tailored heating forging process

    Baldan, M., Steinberg, T. & Baake, E., 8 May 2018, VIII International Scientific Colloquium on Modelling for Materials Processing 21–22 September 2017, Riga, Latvia. 012016. (IOP Conference Series: Materials Science and Engineering; vol. 355).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  117. Published

    Ansätze zur Erhöhung der Lebensdauer von Single-Shot-Induktoren

    Schubotz, S. & Nacke, B., 2018, In: Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018, 6, p. 105-110 6 p.

    Research output: Contribution to journal › Article › Research

  118. Published

    Approaches for increasing lifetime of single-shot inductors

    Schubotz, S. & Nacke, B., 2018, In: Heat processing : international magazine for industrial furnaces, heat treatment plants, equipment. 16, 4, p. 51-56

    Research output: Contribution to journal › Article › Research

  119. Published

    Comparison of Electromagnetic and Marangoni Forces on Thin Coatings during Rapid Heating Process

    Steinberg, T., Opitz, T., Rybakov, A. & Baake, E., 2018, In: IOP Conference Series: Materials Science and Engineering. 355, 012013.

    Research output: Contribution to journal › Conference article › Research › peer review

  120. Published

    Editorial

    Baake, E. & Pleshivtseva, Y., 2018, In: International Journal of Microstructure and Materials Properties. 13, 1/2, p. 1-3

    Research output: Contribution to journal › Editorial in journal › Communication

  121. Published

    Elektrothermische Verfahren

    Nacke, B. & Baake, E., 2018, Praxishandbuch Thermoprozesstechnik: Band 1: Grundlagen - Prozesse - Verfahren. 3. Auflage ed. Essen, Vol. 1. p. 285-360

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  122. Published

    Energieeffizienz induktiver Härteanlagen

    Nacke, B., 2018, In: Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018, 2, p. 43-48 6 p.

    Research output: Contribution to journal › Article › Research

  123. Published

    Energieeffizienz von elektrothermischen Verfahren

    Baake, E., 2018, Praxishandbuch Thermoprozesstechnik: Band 1: Grundlagen - Prozesse - Verfahren. 3. Auflage ed. Essen, Vol. 1. p. 396-398

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  124. Published

    Grundlagen der induktiven Erwärmung

    Baake, E., 2018, In: Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018, 2, p. 107-109 3 p.

    Research output: Contribution to journal › Article › Research

  125. Published

    Induktives Schmelzen von Eisen- und Nichteisenwerkstoffen

    Baake, E., 2018, In: Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018, 7, p. 77-80 4 p.

    Research output: Contribution to journal › Article › Research

  126. Published

    New method for a large-scale levitation melting and casting of Titanium parts

    Spitans, S., Baake, E., Sehring, B. & Franz, H., 2018.

    Research output: Contribution to conference › Paper › Research

  127. Published

    Numerische Simulation des induktiven HF-Längsnahtschweißens

    Ebel, W., Kroll, M., Nikanorov, A. & Baake, E., 2018, Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb, 2018, 2, p. 56-65 10 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  128. Published

    Potentials of induction heating for hot metal forming of car body parts

    Nacke, B. & Dietrich, A., 2018, Thermal Processing in Motion 2018: Including the International Conference on Heat Treatment and Surface Engineering in Automotive Applications. Goldstein, R., Mackenzie, D. S., Frame, L., Ferguson, L. & Guisbert, D. (eds.). ASM International, p. 32-41 10 p.

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  129. Published

    Praxishandbuch Thermoprozesstechnik: Band 1: Grundlagen - Prozesse - Verfahren

    Pfeifer, H. (Editor), Nacke, B. (Editor) & Beneke, F. (Editor), 2018, 3. Auflage ed. 760 p.

    Research output: Book/Report › Anthology › Research

  130. Published

    Prozesswärme - Grußwort der Herausgeber

    Nacke, B. & Pfeifer, H., 2018, In: Prozesswärme : Thermoprozesstechnik, Wärmebehandlung, Anlagenbau und -betrieb. 2018, 1, p. 2-3 2 p.

    Research output: Contribution to journal › Editorial in journal › Communication

  131. Published

    Wirkungsgrade und Energiebilanzen von elektrothermischen Verfahren

    Nacke, B., 2018, Praxishandbuch Thermoprozesstechnik: Band 1: Grundlagen - Prozesse - Verfahren. 3. Auflage ed. Essen, Vol. 1. p. 387-394 6.6

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  132. 2017

  133. Published

    Carbon dioxide free production of hydrogen

    Stoppel, L., Fehling, T., Geißler, T., Baake, E. & Wetzel, T., 3 Aug 2017, In: IOP Conference Series: Materials Science and Engineering. 228, 1, 012016.

    Research output: Contribution to journal › Conference article › Research › peer review

  134. Published

    Liquid metals for solar power systems

    Flesch, J., Niedermeier, K., Fritsch, A., Musaeva, D., Marocco, L., Uhlig, R., Baake, E., Buck, R. & Wetzel, T., 3 Aug 2017, Final LIMTECH Colloquium and International Symposium on Liquid Metal Technologies 19–20 September 2017, Dresden, Germany. 012012. (IOP Conference Series: Materials Science and Engineering; vol. 228).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  135. Published

    Neutron radiography for visualization of liquid metal processes: Bubbly flow for CO2 free production of Hydrogen and solidification processes in em field

    Baake, E., Fehling, T., Musaeva, D. & Steinberg, T., 3 Aug 2017, Final LIMTECH Colloquium and International Symposium on Liquid Metal Technologies 19–20 September 2017, Dresden, Germany. IOP Publishing Ltd., 012026. (IOP Conference Series: Materials Science and Engineering; vol. 228).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  136. Published

    Using Lorentz forces to control the distribution of bubbles in a vertical tube filled with liquid metal

    Heitkam, S., Tschisgale, S., Krull, B., Wetzel, T., Baake, E. & Fröhlich, J., 3 Aug 2017, Final LIMTECH Colloquium and International Symposium on Liquid Metal Technologies 19–20 September 2017, Dresden, Germany. 012008. (IOP Conference Series: Materials Science and Engineering; vol. 288).

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

  137. Published

    Tailored Heating zum anschließenden Umformen

    Steinberg, T., Baldan, M. & Baake, E., Jun 2017, Elektrowärme international (EWI), 75, 2, p. 65-68 4 p.

    Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

  138. Published

    SEM and AFM studies of two-phase magnetic alkali borosilicate glasses

    Andreeva, N., Tomkovich, M., Naberezhnov, A., Nacke, B., Filimonov, A., Alekseeva, O., Vanina, P. & Nizhankovskii, V., 27 Mar 2017, In: Scientific World Journal. 2017, 9078152.

    Research output: Contribution to journal › Article › Research › peer review

  139. Published

    Design concepts of induction mass heating technology based on multiple-criteria optimization

    Pleshivtseva, Y., Rapoport, E., Nacke, B., Nikanorov, A., Barba, P. D., Forzan, M., Lupi, S. & Sieni, E., 6 Mar 2017, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 36, 2, p. 386-400 15 p.

    Research output: Contribution to journal › Article › Research › peer review

  140. Published

    Lattice boltzmann modelling for multiphase bubble flow in electroconducting liquids

    Tatulcenkovs, A., Jakovics, A., Baake, E. & Nacke, B., 6 Mar 2017, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 36, 2, p. 401-407 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  141. Published

    Numerical modelling of induction heated multi-zones rubber vulcanization process

    Ebel, W., Nikanorov, A. & Baake, E., 6 Mar 2017, In: COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 36, 2, p. 497-503 7 p.

    Research output: Contribution to journal › Article › Research › peer review

  142. Published

    Gas bubbles and liquid metal flow influenced by uniform external magnetic field

    Pavlovs, S., Jakovics, A., Baake, E. & Sushkovs, V., 24 Feb 2017, In: International Journal of Applied Electromagnetics and Mechanics. 53, S1, p. S31-S41

    Research output: Contribution to journal › Article › Research › peer review

  143. Published

    New process for continuous melting and pouring of oxides with skull melting crucible

    Kichigin, V., Nacke, B. & Pozniak, I., 24 Feb 2017, In: International Journal of Applied Electromagnetics and Mechanics. 53, S1, p. 89-94

    Research output: Contribution to journal › Conference article › Research

  144. Published

    Analysis of the Almgsi-alloy structure formed under the influence of low-frequency pulsed Lorentz force

    Musaeva, D., Baake, E., Ilin, V. & Jarczyk, G., 2017, In: Magnetohydrodynamics. 53, 2, p. 245-254 10 p.

    Research output: Contribution to journal › Article › Research › peer review

  145. Published

    Application of neutron radiography for in-situ visualization of gallium solidification in travelling magnetic field

    Musaeva, D., Baake, E., Köppen, A. & Vontobel, P., 2017, In: Magnetohydrodynamics. 53, 3, p. 583-593 11 p.

    Research output: Contribution to journal › Article › Research › peer review

  146. Published

    Effects of Holes in Blanks for Press Hardening Process due to Induction Heating

    Dietrich, A., Nacke, B., Pfeifer, F., Marten, T. & Tröste, T., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 327-332

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  147. Published

    Electromagnetic and thermal modelling of a hardening process using mobile inductors

    Sanz-Serrano, F., Sagues, C. & Nacke, B., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 508-513

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  148. Published

    Energieeffizienz induktiver Härteanlagen

    Nacke, B., 2017, Handbuch HärtereiPraxis: Verfahren - Anwendungen - Innovationen. 1. Auflage ed. Essen, p. 240-248

    Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

  149. Published

    Equipment for magnetic glass production by induction melting

    Vanina, P. Y., Naberezhnov, A. A., Nacke, B. & Nikanorov, A., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 486-490

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  150. Published

    Gas bubbles and electrically conducting liquid turbulent flow in uniform magnetic field

    Pavlovs, S., Jakovičs, A., Sushkovs, V. & Baake, E., 2017, In: Magnetohydrodynamics. 53, 1, p. 179-192 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  151. Published

    Hybrid heating methods for efficient and high quality heat treatment processes

    Nacke, B., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 85-92

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  152. Published

    Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating

    Dietrich, A., Nacke, B., Pfeifer, F., Marten, T. & Tröster, T., 2017, Future trends in steel development, processing technologies and applications: bringing the automotive, supplier and steel industries together : 5th SCT 2017 : 5th International Conference on Steels in Cars and Trucks : proceedings. Düsseldorf

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  153. Published

    Investigation of the influence of electromagnetic and Marangoni forces on the displacement of Al-Si coating during the press hardening process

    Opitz, T., Steinberg, T. & Nacke, B., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 181-188

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  154. Published

    Large-scale levitation melting and casting of titanium alloys

    Spitans, S., Franz, H., Baake, E. & Jakovičs, A., 2017, In: Magnetohydrodynamics. 53, 4, p. 633-641 9 p.

    Research output: Contribution to journal › Article › Research › peer review

  155. Published

    Lattice Boltzmann simulation of a bubble flow in electroconducting liquid under the action of the external magnetic field

    Tatulcenkovs, A., Jakovics, A. & Nacke, B., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 306-311

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  156. Published

    LES-study of gas bubbles and liquid metal turbulent MHD-flow for different parameters

    Pavlovs, S., Jakovics, A., Sushkovs, V. & Baake, E., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 462-467

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  157. Published

    Modelling and verification of heat distribution in single-shot coils for examining concepts to increase lifetime

    Schubotz, S. & Nacke, B., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 135-140

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  158. Published

    Multi-physical Numerical Modelling of Remelting Processes in a Double Layer Metal Compositions

    Baake, E., Steinberg, T. & Spitans, S., 2017, Proceedings of the VIII International Scientific Colloquim "Modelling for Materials Processing". p. 73-74

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  159. Published

    Numerical and practical investigation of tailored heating process for forging parts

    Baldan, M., Steinberg, T. & Baake, E., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 338-345

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  160. Published

    Numerical investigation of generative manufactured magnetic flux concentrators for induction heating applications, Proceedings of the XVIII International UIE-Congress on Electrotechnologies for Material Processing

    Steinberg, T., Baldan, M., Nikanorov, A. & Baake, E., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 391-396

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  161. Published

    Numerical modeling of bubble dynamics in liquid metal exposed to electromagnetic fields for hydrogen production

    Fehling, T. C. L. S., Steinberg, T. & Baake, E., 2017, In: International Journal of Applied Electromagnetics and Mechanics. 53, 1, p. 111-120

    Research output: Contribution to journal › Article › Research

  162. Published

    Numerical modelling and investigation of high frequency welding of cladded pipes

    Ebel, W., Nikanorov, A. & Baake, E., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 241-246

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  163. Published

    Numerical simulation and optimization of induction surface hardening systems with rotating workpiece

    Kozulina, T., Galunin, S., Nikanorov, A. & Nacke, B., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 514-519

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  164. Published

    Numerical simulation of bubble dynamics in liquid metal for optimized flow control in CO2 free production of hydrogen

    Fehling, T. C. L. S., Steinberg, T. & Baake, E., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 416-421

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  165. Published

    Numerical simulation of bubble flow in electroconducting liquids by the lattice Boltzmann method

    Tatuļčenkovs, A., Jakovičs, A., Baake, E. & Nacke, B., 2017, In: Magnetohydrodynamics. 53, 2, p. 281-288 8 p.

    Research output: Contribution to journal › Article › Research › peer review

  166. Published

    Numerical simulation of the ingot growth during the vacuum arc remelting process

    Spitans, S., Franz, H., Scholz, H., Reiter, G. & Baake, E., 2017, In: Magnetohydrodynamics. 53, 3, p. 557-570 14 p.

    Research output: Contribution to journal › Article › Research › peer review

  167. Published

    Numerical simulation of the ingot growth during the Vacuum Arc Remelting (VAR) process

    Spitans, S., Franz, H., Scholz, H., Reiter, G. & Baake, E., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 39-47

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

  168. Published

    Phase diagram for K(1-x)(NH4)(x)H2PO4 (x = 0 – 0.15) solid solutions embedded into magnetic glasses

    Vanina, P. Y., Naberezhnov, A. A., Sysoeva, A. A., Nizhankovskii, V. & Nacke, B., 2017, In: Nanosystems: physics, chemistry, mathematics. 8, 6, p. 835-838 19.

    Research output: Contribution to journal › Article › Research

  169. Published

    Properties and structure of magnetic alkali-borosilicate glasses

    Naberezhnov, A. A., Nacke, B., Nikanorov, A., Koroleva, E., Vanina, P. Y. & Andreeva, N., 2017, XVIII International UIE-Congress - Electrotechnologies for Material Processing: Hannover (Germany), June 6-9, 2017. Essen, p. 480-485

    Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Previous 1 2 3 4 5 Next