Details
| Originalsprache | Englisch |
|---|---|
| Seiten | 794-801 |
| Seitenumfang | 8 |
| Band | 84 |
| Ausgabenummer | 10 |
| Fachzeitschrift | STAHLBAU |
| Publikationsstatus | Elektronisch veröffentlicht (E-Pub) - 6 Okt. 2015 |
Abstract
Influence of adjacent trapezoidal steel sheets on the fire behaviour of I-section profiles with intumescent coatings. The thermal protection effect of intumescent coatings is based on the development of a thermal insulation foam layer which delays the heating of the steel elements in case of fi re. In practical usage intumescent coatings are often applied on I-section profi les located close to the exterior wall or roof, which is realised by space-enclosing elements e.g. trapezoidal steel sheets. Consequently, the fl ange of the I-section profi le adjacent to the space-enclosing element is completely or partially covered. As a result the foaming process of the intumescent coating is restrained in fi re situation and the protection system is not able to provide its full thermal protection effect. Besides small scale tests aiming on the analysis of the foaming process of intumescent coatings, fi re tests on coated I-section profi les with and without adjacent trapezoidal steel sheet are presented in this paper in order to evaluate the heating behavior of intumescent coatings in this special confi guration. In this fi rst part of the paper an overview of the experimental investigations which were carried out in the DASt research project (IGF 17200 N) is presented fi rst. In the second part numerical investigations, which enable the simulation of the high temperature behaviour of intumescent coatings taking into account the foaming process and the prediction of the heating of coated I-section profi les will be presented.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Tief- und Ingenieurbau
- Ingenieurwesen (insg.)
- Bauwesen
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Ingenieurwesen (insg.)
- Maschinenbau
- Werkstoffwissenschaften (insg.)
- Metalle und Legierungen
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: STAHLBAU, Jahrgang 84, Nr. 10, 06.10.2015, S. 794-801.
Publikation: Beitrag in nicht-wissenschaftlicher/populärwissenschaftlicher Zeitschrift/Zeitung › Beitrag in Publikumszeitung/-zeitschrift › Transfer
}
TY - GEN
T1 - Zum Einfluss angrenzender Trapezprofile auf das Brandverhalten von I-Profilen mit Dämmschichtbildnern
T2 - Teil 1: Experimentelle Untersuchungen
AU - Schaumann, Peter
AU - Tabeling, Florian
PY - 2015/10/6
Y1 - 2015/10/6
N2 - Influence of adjacent trapezoidal steel sheets on the fire behaviour of I-section profiles with intumescent coatings. The thermal protection effect of intumescent coatings is based on the development of a thermal insulation foam layer which delays the heating of the steel elements in case of fi re. In practical usage intumescent coatings are often applied on I-section profi les located close to the exterior wall or roof, which is realised by space-enclosing elements e.g. trapezoidal steel sheets. Consequently, the fl ange of the I-section profi le adjacent to the space-enclosing element is completely or partially covered. As a result the foaming process of the intumescent coating is restrained in fi re situation and the protection system is not able to provide its full thermal protection effect. Besides small scale tests aiming on the analysis of the foaming process of intumescent coatings, fi re tests on coated I-section profi les with and without adjacent trapezoidal steel sheet are presented in this paper in order to evaluate the heating behavior of intumescent coatings in this special confi guration. In this fi rst part of the paper an overview of the experimental investigations which were carried out in the DASt research project (IGF 17200 N) is presented fi rst. In the second part numerical investigations, which enable the simulation of the high temperature behaviour of intumescent coatings taking into account the foaming process and the prediction of the heating of coated I-section profi les will be presented.
AB - Influence of adjacent trapezoidal steel sheets on the fire behaviour of I-section profiles with intumescent coatings. The thermal protection effect of intumescent coatings is based on the development of a thermal insulation foam layer which delays the heating of the steel elements in case of fi re. In practical usage intumescent coatings are often applied on I-section profi les located close to the exterior wall or roof, which is realised by space-enclosing elements e.g. trapezoidal steel sheets. Consequently, the fl ange of the I-section profi le adjacent to the space-enclosing element is completely or partially covered. As a result the foaming process of the intumescent coating is restrained in fi re situation and the protection system is not able to provide its full thermal protection effect. Besides small scale tests aiming on the analysis of the foaming process of intumescent coatings, fi re tests on coated I-section profi les with and without adjacent trapezoidal steel sheet are presented in this paper in order to evaluate the heating behavior of intumescent coatings in this special confi guration. In this fi rst part of the paper an overview of the experimental investigations which were carried out in the DASt research project (IGF 17200 N) is presented fi rst. In the second part numerical investigations, which enable the simulation of the high temperature behaviour of intumescent coatings taking into account the foaming process and the prediction of the heating of coated I-section profi les will be presented.
KW - Brandschutz - fire protection
KW - Versuche - experimental set-ups
UR - http://www.scopus.com/inward/record.url?scp=84943178685&partnerID=8YFLogxK
U2 - 10.1002/stab.201510323
DO - 10.1002/stab.201510323
M3 - Contribution in non-scientific journal
AN - SCOPUS:84943178685
VL - 84
SP - 794
EP - 801
JO - STAHLBAU
JF - STAHLBAU
SN - 0038-9145
ER -