Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 1603-1615 |
| Seitenumfang | 13 |
| Fachzeitschrift | WEAR |
| Jahrgang | 426-427 |
| Ausgabenummer | B |
| Frühes Online-Datum | 10 Apr. 2019 |
| Publikationsstatus | Veröffentlicht - 30 Apr. 2019 |
Abstract
Selective oxidization of tool steel surfaces was studied, as this is a promising approach to realize lubricant free forming processes. Powder metallurgically manufactured 1.2379 tool steel was employed as substrate. Heat treatment was realized inductively under controlled process atmosphere generating α-Fe 2 O 3 oxide layer systems, which can act as friction reducing separation layers. In this context, it is important to note that hardened 1.2379 tool steel features precipitations of chromium carbides, which also occur in the near surface areas. As coarse carbides will not be covered by the α-Fe 2 O 3 oxide layer, powder metallurgically manufactured tool steel with smaller, finely distributed chromium carbides was used, and better performance was obtained in this respect. Inductive heat treatment with varying frequency and strength of the coil current was employed. The effects on the characteristics of the oxide layer formed were determined by both experiments and simulations.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Physik und Astronomie (insg.)
- Oberflächen und Grenzflächen
- Werkstoffwissenschaften (insg.)
- Oberflächen, Beschichtungen und Folien
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: WEAR, Jahrgang 426-427, Nr. B, 30.04.2019, S. 1603-1615.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Wear behavior of selectively oxidized α-Fe 2 O 3 oxide low-friction layer systems on PM tool steel surfaces
AU - Schöler, Simon
AU - Schmieding, Maurice
AU - Yilkiran, Deniz
AU - Özkaya, Fahrettin
AU - Nowak, Christopher
AU - Möhwald, Kai
AU - Behrens, Bernd Arno
AU - Maier, Hans Jürgen
N1 - Funding Information: Financial support of this study by the German Research Foundation (DFG) (Grants no. BE1690/170-2 and MA1175/41-2 ) within the framework of the priority programme Sustainable Production through Dry Processing in Metal Forming (SPP 1676) is gratefully acknowledged.
PY - 2019/4/30
Y1 - 2019/4/30
N2 - Selective oxidization of tool steel surfaces was studied, as this is a promising approach to realize lubricant free forming processes. Powder metallurgically manufactured 1.2379 tool steel was employed as substrate. Heat treatment was realized inductively under controlled process atmosphere generating α-Fe 2 O 3 oxide layer systems, which can act as friction reducing separation layers. In this context, it is important to note that hardened 1.2379 tool steel features precipitations of chromium carbides, which also occur in the near surface areas. As coarse carbides will not be covered by the α-Fe 2 O 3 oxide layer, powder metallurgically manufactured tool steel with smaller, finely distributed chromium carbides was used, and better performance was obtained in this respect. Inductive heat treatment with varying frequency and strength of the coil current was employed. The effects on the characteristics of the oxide layer formed were determined by both experiments and simulations.
AB - Selective oxidization of tool steel surfaces was studied, as this is a promising approach to realize lubricant free forming processes. Powder metallurgically manufactured 1.2379 tool steel was employed as substrate. Heat treatment was realized inductively under controlled process atmosphere generating α-Fe 2 O 3 oxide layer systems, which can act as friction reducing separation layers. In this context, it is important to note that hardened 1.2379 tool steel features precipitations of chromium carbides, which also occur in the near surface areas. As coarse carbides will not be covered by the α-Fe 2 O 3 oxide layer, powder metallurgically manufactured tool steel with smaller, finely distributed chromium carbides was used, and better performance was obtained in this respect. Inductive heat treatment with varying frequency and strength of the coil current was employed. The effects on the characteristics of the oxide layer formed were determined by both experiments and simulations.
KW - Friction
KW - Inductive heat treatment
KW - PM steel
KW - Sliding wear
KW - Surface analysis
UR - http://www.scopus.com/inward/record.url?scp=85059841949&partnerID=8YFLogxK
U2 - 10.1016/j.wear.2019.01.009
DO - 10.1016/j.wear.2019.01.009
M3 - Article
AN - SCOPUS:85059841949
VL - 426-427
SP - 1603
EP - 1615
JO - WEAR
JF - WEAR
SN - 0043-1648
IS - B
ER -