Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autorschaft

  • Sarah Gniesmer
  • Ralph Brehm
  • Andrea Hoffmann
  • Dominik de Cassan
  • Henning Menzel
  • Anna Lena Hoheisel
  • Birgit Glasmacher
  • Elmar Willbold
  • Janin Reifenrath
  • Nils Ludwig
  • Ruediger Zimmerer
  • Frank Tavassol
  • Nils Claudius Gellrich
  • Andreas Kampmann

Organisationseinheiten

Externe Organisationen

  • Stiftung Tierärztliche Hochschule Hannover
  • Technische Universität Braunschweig
  • University of Pittsburgh
  • NIFE- Niedersächsisches Zentrum für Biomedizintechnik, Implantatforschung und Entwicklung
  • Medizinische Hochschule Hannover (MHH)
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Aufsatznummere0227563
FachzeitschriftPLoS ONE
Jahrgang15
Ausgabenummer1
PublikationsstatusVeröffentlicht - 13 Jan. 2020

Abstract

Rotator cuff tear is the most frequent tendon injury in the adult population. Despite current improvements in surgical techniques and the development of grafts, failure rates following tendon reconstruction remain high. New therapies, which aim to restore the topology and functionality of the interface between muscle, tendon and bone, are essentially required. One of the key factors for a successful incorporation of tissue engineered constructs is a rapid ingrowth of cells and tissues, which is dependent on a fast vascularization. The dorsal skinfold chamber model in female BALB/cJZtm mice allows the observation of microhemodynamic parameters in repeated measurements in vivo and therefore the description of the vascularization of different implant materials. In order to promote vascularization of implant material, we compared a porous polymer patch (a commercially available porous polyurethane based scaffold from Biomerix™) with electrospun polycaprolactone (PCL) fiber mats and chitosan-graft-PCL coated electrospun PCL (CS-g-PCL) fiber mats in vivo. Using intravital fluorescence microscopy microcirculatory parameters were analyzed repetitively over 14 days. Vascularization was significantly increased in CS-g-PCL fiber mats at day 14 compared to the porous polymer patch and uncoated PCL fiber mats. Furthermore CS-g-PCL fiber mats showed also a reduced activation of immune cells. Clinically, these are important findings as they indicate that the CS-g-PCL improves the formation of vascularized tissue and the ingrowth of cells into electrospun PCL scaffolds. Especially the combination of enhanced vascularization and the reduction in immune cell activation at the later time points of our study points to an improved clinical outcome after rotator cuff tear repair.

ASJC Scopus Sachgebiete

Zitieren

Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair. / Gniesmer, Sarah; Brehm, Ralph; Hoffmann, Andrea et al.
in: PLoS ONE, Jahrgang 15, Nr. 1, e0227563, 13.01.2020.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Gniesmer, S, Brehm, R, Hoffmann, A, de Cassan, D, Menzel, H, Hoheisel, AL, Glasmacher, B, Willbold, E, Reifenrath, J, Ludwig, N, Zimmerer, R, Tavassol, F, Gellrich, NC & Kampmann, A 2020, 'Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair', PLoS ONE, Jg. 15, Nr. 1, e0227563. https://doi.org/10.1371/journal.pone.0227563
Gniesmer, S., Brehm, R., Hoffmann, A., de Cassan, D., Menzel, H., Hoheisel, A. L., Glasmacher, B., Willbold, E., Reifenrath, J., Ludwig, N., Zimmerer, R., Tavassol, F., Gellrich, N. C., & Kampmann, A. (2020). Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair. PLoS ONE, 15(1), Artikel e0227563. https://doi.org/10.1371/journal.pone.0227563
Gniesmer S, Brehm R, Hoffmann A, de Cassan D, Menzel H, Hoheisel AL et al. Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair. PLoS ONE. 2020 Jan 13;15(1):e0227563. doi: 10.1371/journal.pone.0227563
Gniesmer, Sarah ; Brehm, Ralph ; Hoffmann, Andrea et al. / Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair. in: PLoS ONE. 2020 ; Jahrgang 15, Nr. 1.
Download
@article{640788b53d6049f7b0874a14510b9e7e,
title = "Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair",
abstract = "Rotator cuff tear is the most frequent tendon injury in the adult population. Despite current improvements in surgical techniques and the development of grafts, failure rates following tendon reconstruction remain high. New therapies, which aim to restore the topology and functionality of the interface between muscle, tendon and bone, are essentially required. One of the key factors for a successful incorporation of tissue engineered constructs is a rapid ingrowth of cells and tissues, which is dependent on a fast vascularization. The dorsal skinfold chamber model in female BALB/cJZtm mice allows the observation of microhemodynamic parameters in repeated measurements in vivo and therefore the description of the vascularization of different implant materials. In order to promote vascularization of implant material, we compared a porous polymer patch (a commercially available porous polyurethane based scaffold from Biomerix{\texttrademark}) with electrospun polycaprolactone (PCL) fiber mats and chitosan-graft-PCL coated electrospun PCL (CS-g-PCL) fiber mats in vivo. Using intravital fluorescence microscopy microcirculatory parameters were analyzed repetitively over 14 days. Vascularization was significantly increased in CS-g-PCL fiber mats at day 14 compared to the porous polymer patch and uncoated PCL fiber mats. Furthermore CS-g-PCL fiber mats showed also a reduced activation of immune cells. Clinically, these are important findings as they indicate that the CS-g-PCL improves the formation of vascularized tissue and the ingrowth of cells into electrospun PCL scaffolds. Especially the combination of enhanced vascularization and the reduction in immune cell activation at the later time points of our study points to an improved clinical outcome after rotator cuff tear repair.",
author = "Sarah Gniesmer and Ralph Brehm and Andrea Hoffmann and {de Cassan}, Dominik and Henning Menzel and Hoheisel, {Anna Lena} and Birgit Glasmacher and Elmar Willbold and Janin Reifenrath and Nils Ludwig and Ruediger Zimmerer and Frank Tavassol and Gellrich, {Nils Claudius} and Andreas Kampmann",
note = "Funding information: This research project has been supported by the German Research foundation (DFG), research unit FOR 2180 “Gradierte Implantate f{\"u}r Sehnen-Knochen-Verbindungen“. Grant numbers KA 4236/1-1 and KA 4236/1-2 to AK. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. We acknowledge the excellent technical assistance of Stefanie Rausch. This research project has been supported by the German Research foundation (DFG), research unit FOR 2180 “Gradierte Implantate f{\"u}r Sehnen-Knochen-Verbindungen“.",
year = "2020",
month = jan,
day = "13",
doi = "10.1371/journal.pone.0227563",
language = "English",
volume = "15",
journal = "PLoS ONE",
issn = "1932-6203",
publisher = "Public Library of Science",
number = "1",

}

Download

TY - JOUR

T1 - Vascularization and biocompatibility of poly(ε-caprolactone) fiber mats for rotator cuff tear repair

AU - Gniesmer, Sarah

AU - Brehm, Ralph

AU - Hoffmann, Andrea

AU - de Cassan, Dominik

AU - Menzel, Henning

AU - Hoheisel, Anna Lena

AU - Glasmacher, Birgit

AU - Willbold, Elmar

AU - Reifenrath, Janin

AU - Ludwig, Nils

AU - Zimmerer, Ruediger

AU - Tavassol, Frank

AU - Gellrich, Nils Claudius

AU - Kampmann, Andreas

N1 - Funding information: This research project has been supported by the German Research foundation (DFG), research unit FOR 2180 “Gradierte Implantate für Sehnen-Knochen-Verbindungen“. Grant numbers KA 4236/1-1 and KA 4236/1-2 to AK. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. We acknowledge the excellent technical assistance of Stefanie Rausch. This research project has been supported by the German Research foundation (DFG), research unit FOR 2180 “Gradierte Implantate für Sehnen-Knochen-Verbindungen“.

PY - 2020/1/13

Y1 - 2020/1/13

N2 - Rotator cuff tear is the most frequent tendon injury in the adult population. Despite current improvements in surgical techniques and the development of grafts, failure rates following tendon reconstruction remain high. New therapies, which aim to restore the topology and functionality of the interface between muscle, tendon and bone, are essentially required. One of the key factors for a successful incorporation of tissue engineered constructs is a rapid ingrowth of cells and tissues, which is dependent on a fast vascularization. The dorsal skinfold chamber model in female BALB/cJZtm mice allows the observation of microhemodynamic parameters in repeated measurements in vivo and therefore the description of the vascularization of different implant materials. In order to promote vascularization of implant material, we compared a porous polymer patch (a commercially available porous polyurethane based scaffold from Biomerix™) with electrospun polycaprolactone (PCL) fiber mats and chitosan-graft-PCL coated electrospun PCL (CS-g-PCL) fiber mats in vivo. Using intravital fluorescence microscopy microcirculatory parameters were analyzed repetitively over 14 days. Vascularization was significantly increased in CS-g-PCL fiber mats at day 14 compared to the porous polymer patch and uncoated PCL fiber mats. Furthermore CS-g-PCL fiber mats showed also a reduced activation of immune cells. Clinically, these are important findings as they indicate that the CS-g-PCL improves the formation of vascularized tissue and the ingrowth of cells into electrospun PCL scaffolds. Especially the combination of enhanced vascularization and the reduction in immune cell activation at the later time points of our study points to an improved clinical outcome after rotator cuff tear repair.

AB - Rotator cuff tear is the most frequent tendon injury in the adult population. Despite current improvements in surgical techniques and the development of grafts, failure rates following tendon reconstruction remain high. New therapies, which aim to restore the topology and functionality of the interface between muscle, tendon and bone, are essentially required. One of the key factors for a successful incorporation of tissue engineered constructs is a rapid ingrowth of cells and tissues, which is dependent on a fast vascularization. The dorsal skinfold chamber model in female BALB/cJZtm mice allows the observation of microhemodynamic parameters in repeated measurements in vivo and therefore the description of the vascularization of different implant materials. In order to promote vascularization of implant material, we compared a porous polymer patch (a commercially available porous polyurethane based scaffold from Biomerix™) with electrospun polycaprolactone (PCL) fiber mats and chitosan-graft-PCL coated electrospun PCL (CS-g-PCL) fiber mats in vivo. Using intravital fluorescence microscopy microcirculatory parameters were analyzed repetitively over 14 days. Vascularization was significantly increased in CS-g-PCL fiber mats at day 14 compared to the porous polymer patch and uncoated PCL fiber mats. Furthermore CS-g-PCL fiber mats showed also a reduced activation of immune cells. Clinically, these are important findings as they indicate that the CS-g-PCL improves the formation of vascularized tissue and the ingrowth of cells into electrospun PCL scaffolds. Especially the combination of enhanced vascularization and the reduction in immune cell activation at the later time points of our study points to an improved clinical outcome after rotator cuff tear repair.

UR - http://www.scopus.com/inward/record.url?scp=85077765674&partnerID=8YFLogxK

U2 - 10.1371/journal.pone.0227563

DO - 10.1371/journal.pone.0227563

M3 - Article

C2 - 31929570

AN - SCOPUS:85077765674

VL - 15

JO - PLoS ONE

JF - PLoS ONE

SN - 1932-6203

IS - 1

M1 - e0227563

ER -