Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 501-507 |
| Seitenumfang | 7 |
| Fachzeitschrift | Journal of manufacturing processes |
| Jahrgang | 15 |
| Ausgabenummer | 4 |
| Publikationsstatus | Veröffentlicht - 1 Okt. 2013 |
Abstract
The results of experiments on twin-roll casting of aluminum-steel clad strips are presented. For the first time this energy-saving production technology for a clad material of this metals combination was implemented. Besides the experimental equipment and processing details, the results of metallographic, electron microprobe and transmission electron microscopy analysis of the aluminum-steel interface are shown. The pack rolling and deep-drawing tests of the twin-roll cast clad strips were performed to check their applicability for a further processing using plastic deformation. In addition adhesive strength of the bond was tested. The performed analysis have shown the formation of a continuous, thin and uniform layer of intermetallic phases on the materials interface of approx. 3 μm thickness having an adhesive strength over 70 MPa.
ASJC Scopus Sachgebiete
- Betriebswirtschaft, Management und Rechnungswesen (insg.)
- Strategie und Management
- Entscheidungswissenschaften (insg.)
- Managementlehre und Operations Resarch
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Journal of manufacturing processes, Jahrgang 15, Nr. 4, 01.10.2013, S. 501-507.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Twin-roll casting of aluminum-steel clad strips
AU - Grydin, Olexandr
AU - Gerstein, Gregory
AU - Nürnberger, Florian
AU - Schaper, Mirko
AU - Danchenko, Valentyn
PY - 2013/10/1
Y1 - 2013/10/1
N2 - The results of experiments on twin-roll casting of aluminum-steel clad strips are presented. For the first time this energy-saving production technology for a clad material of this metals combination was implemented. Besides the experimental equipment and processing details, the results of metallographic, electron microprobe and transmission electron microscopy analysis of the aluminum-steel interface are shown. The pack rolling and deep-drawing tests of the twin-roll cast clad strips were performed to check their applicability for a further processing using plastic deformation. In addition adhesive strength of the bond was tested. The performed analysis have shown the formation of a continuous, thin and uniform layer of intermetallic phases on the materials interface of approx. 3 μm thickness having an adhesive strength over 70 MPa.
AB - The results of experiments on twin-roll casting of aluminum-steel clad strips are presented. For the first time this energy-saving production technology for a clad material of this metals combination was implemented. Besides the experimental equipment and processing details, the results of metallographic, electron microprobe and transmission electron microscopy analysis of the aluminum-steel interface are shown. The pack rolling and deep-drawing tests of the twin-roll cast clad strips were performed to check their applicability for a further processing using plastic deformation. In addition adhesive strength of the bond was tested. The performed analysis have shown the formation of a continuous, thin and uniform layer of intermetallic phases on the materials interface of approx. 3 μm thickness having an adhesive strength over 70 MPa.
KW - Aluminum
KW - Clad interface
KW - Clad strip
KW - Steel
KW - Twin-roll casting
UR - http://www.scopus.com/inward/record.url?scp=84888003009&partnerID=8YFLogxK
U2 - 10.1016/j.jmapro.2013.08.008
DO - 10.1016/j.jmapro.2013.08.008
M3 - Article
AN - SCOPUS:84888003009
VL - 15
SP - 501
EP - 507
JO - Journal of manufacturing processes
JF - Journal of manufacturing processes
SN - 1526-6125
IS - 4
ER -