Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | 5th World Tribology Congress, WTC 2013 |
| Seiten | 3346-3349 |
| Seitenumfang | 4 |
| ISBN (elektronisch) | 9781634393522 |
| Publikationsstatus | Veröffentlicht - 2013 |
| Extern publiziert | Ja |
| Veranstaltung | 5th World Tribology Congress, WTC 2013 - Torino, Italien Dauer: 8 Sept. 2013 → 13 Sept. 2013 |
Publikationsreihe
| Name | 5th World Tribology Congress, WTC 2013 |
|---|---|
| Band | 4 |
Abstract
With regard to a tribological contact between two surfaces in relative motion, Al shows insufficient properties due to fretting. For providing optimized tribological properties, its surface can be cladded with a hard coating. An approach is the deposition of a thin hard ceramic layer based on Al2O3 by laser cladding. The coating can be realized with a thickness of a few ten to a few hundred microns in this process. A benefit is that that the coating can be deposited relatively thick and locally on a predefined area of the substrate. In this work ceramic Al2O3 coatings were fabricated by laser cladding on Al and tested by nanoindentational and pin-on-table tests.
ASJC Scopus Sachgebiete
- Chemische Verfahrenstechnik (insg.)
- Prozesschemie und -technologie
- Ingenieurwesen (insg.)
- Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
5th World Tribology Congress, WTC 2013. 2013. S. 3346-3349 (5th World Tribology Congress, WTC 2013; Band 4).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Tribological investigation of laser cladded ceramic Al2O3 coatings on aluminium
AU - Pape, F.
AU - Noelke, C.
AU - Kaierle, S.
AU - Hangen, U. D.
AU - Reiter, R.
AU - Wesling, V.
PY - 2013
Y1 - 2013
N2 - With regard to a tribological contact between two surfaces in relative motion, Al shows insufficient properties due to fretting. For providing optimized tribological properties, its surface can be cladded with a hard coating. An approach is the deposition of a thin hard ceramic layer based on Al2O3 by laser cladding. The coating can be realized with a thickness of a few ten to a few hundred microns in this process. A benefit is that that the coating can be deposited relatively thick and locally on a predefined area of the substrate. In this work ceramic Al2O3 coatings were fabricated by laser cladding on Al and tested by nanoindentational and pin-on-table tests.
AB - With regard to a tribological contact between two surfaces in relative motion, Al shows insufficient properties due to fretting. For providing optimized tribological properties, its surface can be cladded with a hard coating. An approach is the deposition of a thin hard ceramic layer based on Al2O3 by laser cladding. The coating can be realized with a thickness of a few ten to a few hundred microns in this process. A benefit is that that the coating can be deposited relatively thick and locally on a predefined area of the substrate. In this work ceramic Al2O3 coatings were fabricated by laser cladding on Al and tested by nanoindentational and pin-on-table tests.
UR - http://www.scopus.com/inward/record.url?scp=84919471850&partnerID=8YFLogxK
M3 - Conference contribution
T3 - 5th World Tribology Congress, WTC 2013
SP - 3346
EP - 3349
BT - 5th World Tribology Congress, WTC 2013
T2 - 5th World Tribology Congress, WTC 2013
Y2 - 8 September 2013 through 13 September 2013
ER -