The relation between thermal and electrical stress and the PD behavior of Epoxy-resin Transformers

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)1007-1015
Seitenumfang9
FachzeitschriftIEEE Transactions on Electrical Insulation
Jahrgang28
Ausgabenummer6
PublikationsstatusVeröffentlicht - Dez. 1993

Abstract

This paper deals with the PD behavior of epoxy resin transformer coils in a temperature range between −30 and 180°C. In particular the PD inception voltage as a very important parameter for the judgement of the PD characteristic of a transformer over the temperature is considered. The PD inception voltage is determined at different static temperatures in step test. The tempering of the coils occur from the outside by submerging the coil in tempered fluid, as well as from inside, with the help of current losses. Models of HV coils of distribution transformers are used as specimen. The windings of the coils consist of wires which have different insulation. Some windings consist of wires with a thin layer of varnish. The others have wires with a glass-silk wrapped insulation. The dependencies between the PD inception voltage of the coils and parameters such as wire insulation and inner or outer tempering are determined and discussed. Furthermore the results of long term tests are introduced in which five coils are stressed with a voltage of 1.75 kV at a temperature of 175°C for a duration of 1 yr. During this time PD measurements with a sensitivity of 2 pC were carried out.

ASJC Scopus Sachgebiete

Zitieren

The relation between thermal and electrical stress and the PD behavior of Epoxy-resin Transformers. / Borsi, H.
in: IEEE Transactions on Electrical Insulation, Jahrgang 28, Nr. 6, 12.1993, S. 1007-1015.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Download
@article{9d626f8910574cb2a497dddbfe0ad927,
title = "The relation between thermal and electrical stress and the PD behavior of Epoxy-resin Transformers",
abstract = "This paper deals with the PD behavior of epoxy resin transformer coils in a temperature range between −30 and 180°C. In particular the PD inception voltage as a very important parameter for the judgement of the PD characteristic of a transformer over the temperature is considered. The PD inception voltage is determined at different static temperatures in step test. The tempering of the coils occur from the outside by submerging the coil in tempered fluid, as well as from inside, with the help of current losses. Models of HV coils of distribution transformers are used as specimen. The windings of the coils consist of wires which have different insulation. Some windings consist of wires with a thin layer of varnish. The others have wires with a glass-silk wrapped insulation. The dependencies between the PD inception voltage of the coils and parameters such as wire insulation and inner or outer tempering are determined and discussed. Furthermore the results of long term tests are introduced in which five coils are stressed with a voltage of 1.75 kV at a temperature of 175°C for a duration of 1 yr. During this time PD measurements with a sensitivity of 2 pC were carried out.",
author = "H. Borsi",
note = "Copyright: Copyright 2015 Elsevier B.V., All rights reserved.",
year = "1993",
month = dec,
doi = "10.1109/14.249374",
language = "English",
volume = "28",
pages = "1007--1015",
journal = "IEEE Transactions on Electrical Insulation",
issn = "0018-9367",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "6",

}

Download

TY - JOUR

T1 - The relation between thermal and electrical stress and the PD behavior of Epoxy-resin Transformers

AU - Borsi, H.

N1 - Copyright: Copyright 2015 Elsevier B.V., All rights reserved.

PY - 1993/12

Y1 - 1993/12

N2 - This paper deals with the PD behavior of epoxy resin transformer coils in a temperature range between −30 and 180°C. In particular the PD inception voltage as a very important parameter for the judgement of the PD characteristic of a transformer over the temperature is considered. The PD inception voltage is determined at different static temperatures in step test. The tempering of the coils occur from the outside by submerging the coil in tempered fluid, as well as from inside, with the help of current losses. Models of HV coils of distribution transformers are used as specimen. The windings of the coils consist of wires which have different insulation. Some windings consist of wires with a thin layer of varnish. The others have wires with a glass-silk wrapped insulation. The dependencies between the PD inception voltage of the coils and parameters such as wire insulation and inner or outer tempering are determined and discussed. Furthermore the results of long term tests are introduced in which five coils are stressed with a voltage of 1.75 kV at a temperature of 175°C for a duration of 1 yr. During this time PD measurements with a sensitivity of 2 pC were carried out.

AB - This paper deals with the PD behavior of epoxy resin transformer coils in a temperature range between −30 and 180°C. In particular the PD inception voltage as a very important parameter for the judgement of the PD characteristic of a transformer over the temperature is considered. The PD inception voltage is determined at different static temperatures in step test. The tempering of the coils occur from the outside by submerging the coil in tempered fluid, as well as from inside, with the help of current losses. Models of HV coils of distribution transformers are used as specimen. The windings of the coils consist of wires which have different insulation. Some windings consist of wires with a thin layer of varnish. The others have wires with a glass-silk wrapped insulation. The dependencies between the PD inception voltage of the coils and parameters such as wire insulation and inner or outer tempering are determined and discussed. Furthermore the results of long term tests are introduced in which five coils are stressed with a voltage of 1.75 kV at a temperature of 175°C for a duration of 1 yr. During this time PD measurements with a sensitivity of 2 pC were carried out.

UR - http://www.scopus.com/inward/record.url?scp=0027805928&partnerID=8YFLogxK

U2 - 10.1109/14.249374

DO - 10.1109/14.249374

M3 - Article

AN - SCOPUS:0027805928

VL - 28

SP - 1007

EP - 1015

JO - IEEE Transactions on Electrical Insulation

JF - IEEE Transactions on Electrical Insulation

SN - 0018-9367

IS - 6

ER -