The natural durability of industrial important European wood species in different use classes

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autorschaft

  • Andreas O. Rapp
  • Ulrike Augusta

Externe Organisationen

  • Johann Heinrich von Thünen-Institut, Bundesforschungsinstitut für Ländliche Räume, Wald und Fischerei
  • Universität Hamburg
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)131-140
Seitenumfang10
FachzeitschriftDrvna industrija
Jahrgang54
Ausgabenummer3
PublikationsstatusVeröffentlicht - 2003
Extern publiziertJa

Abstract

The natural durability of important European wood species has been tested on 3970 specimens in field trials. The wood was exposed at five test fields in Germany with different climates at each site in European hazard class 4 and 3 (with and without soil contact). Within EHC 3 three different expositions were tested: end grain sheltered, unsheltered and with water trap. The test has now been running for 3 years. The results have shown that the type of exposition (EHC 3 or EHC 4) has a strong influence on both: the decay activity and the durability determined as the quotient of decay of tested species and Scots pine sapwood. The test site had a strong effect on decay activity and time to failure, whereas the effect on durability was lower. Up to now it has not yet been possible to calculate the final durability classification, but so far the field tests in soil have confirmed the natural durability given in EN 350 (with the exceptions of Quercus robur and Robinia pseudoacacia, both being less durable than said in the standard). Whereas so far the above ground tests have revealed a higher durability than classified in the standard EN 350 for all soft-wood species with coloured heartwood (heartwood of larix, pseudotsuga and pinus). It is obvious that the current classification of natural durability is only valid for use in soil contact. Future amendments of the standard EN 350 seem to be reasonable. It is proposed that durability class shall be listed separately for in ground and for above ground use in the future.

ASJC Scopus Sachgebiete

Zitieren

The natural durability of industrial important European wood species in different use classes. / Rapp, Andreas O.; Augusta, Ulrike.
in: Drvna industrija, Jahrgang 54, Nr. 3, 2003, S. 131-140.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Rapp, Andreas O. ; Augusta, Ulrike. / The natural durability of industrial important European wood species in different use classes. in: Drvna industrija. 2003 ; Jahrgang 54, Nr. 3. S. 131-140.
Download
@article{1115b2d6616d46bea69780bd7a05e7e4,
title = "The natural durability of industrial important European wood species in different use classes",
abstract = "The natural durability of important European wood species has been tested on 3970 specimens in field trials. The wood was exposed at five test fields in Germany with different climates at each site in European hazard class 4 and 3 (with and without soil contact). Within EHC 3 three different expositions were tested: end grain sheltered, unsheltered and with water trap. The test has now been running for 3 years. The results have shown that the type of exposition (EHC 3 or EHC 4) has a strong influence on both: the decay activity and the durability determined as the quotient of decay of tested species and Scots pine sapwood. The test site had a strong effect on decay activity and time to failure, whereas the effect on durability was lower. Up to now it has not yet been possible to calculate the final durability classification, but so far the field tests in soil have confirmed the natural durability given in EN 350 (with the exceptions of Quercus robur and Robinia pseudoacacia, both being less durable than said in the standard). Whereas so far the above ground tests have revealed a higher durability than classified in the standard EN 350 for all soft-wood species with coloured heartwood (heartwood of larix, pseudotsuga and pinus). It is obvious that the current classification of natural durability is only valid for use in soil contact. Future amendments of the standard EN 350 seem to be reasonable. It is proposed that durability class shall be listed separately for in ground and for above ground use in the future.",
keywords = "European wood species, Field tests, Hazard classes, Natural durability",
author = "Rapp, {Andreas O.} and Ulrike Augusta",
year = "2003",
language = "English",
volume = "54",
pages = "131--140",
journal = "Drvna industrija",
issn = "0012-6772",
publisher = "Journal Drvna Industrija",
number = "3",

}

Download

TY - JOUR

T1 - The natural durability of industrial important European wood species in different use classes

AU - Rapp, Andreas O.

AU - Augusta, Ulrike

PY - 2003

Y1 - 2003

N2 - The natural durability of important European wood species has been tested on 3970 specimens in field trials. The wood was exposed at five test fields in Germany with different climates at each site in European hazard class 4 and 3 (with and without soil contact). Within EHC 3 three different expositions were tested: end grain sheltered, unsheltered and with water trap. The test has now been running for 3 years. The results have shown that the type of exposition (EHC 3 or EHC 4) has a strong influence on both: the decay activity and the durability determined as the quotient of decay of tested species and Scots pine sapwood. The test site had a strong effect on decay activity and time to failure, whereas the effect on durability was lower. Up to now it has not yet been possible to calculate the final durability classification, but so far the field tests in soil have confirmed the natural durability given in EN 350 (with the exceptions of Quercus robur and Robinia pseudoacacia, both being less durable than said in the standard). Whereas so far the above ground tests have revealed a higher durability than classified in the standard EN 350 for all soft-wood species with coloured heartwood (heartwood of larix, pseudotsuga and pinus). It is obvious that the current classification of natural durability is only valid for use in soil contact. Future amendments of the standard EN 350 seem to be reasonable. It is proposed that durability class shall be listed separately for in ground and for above ground use in the future.

AB - The natural durability of important European wood species has been tested on 3970 specimens in field trials. The wood was exposed at five test fields in Germany with different climates at each site in European hazard class 4 and 3 (with and without soil contact). Within EHC 3 three different expositions were tested: end grain sheltered, unsheltered and with water trap. The test has now been running for 3 years. The results have shown that the type of exposition (EHC 3 or EHC 4) has a strong influence on both: the decay activity and the durability determined as the quotient of decay of tested species and Scots pine sapwood. The test site had a strong effect on decay activity and time to failure, whereas the effect on durability was lower. Up to now it has not yet been possible to calculate the final durability classification, but so far the field tests in soil have confirmed the natural durability given in EN 350 (with the exceptions of Quercus robur and Robinia pseudoacacia, both being less durable than said in the standard). Whereas so far the above ground tests have revealed a higher durability than classified in the standard EN 350 for all soft-wood species with coloured heartwood (heartwood of larix, pseudotsuga and pinus). It is obvious that the current classification of natural durability is only valid for use in soil contact. Future amendments of the standard EN 350 seem to be reasonable. It is proposed that durability class shall be listed separately for in ground and for above ground use in the future.

KW - European wood species

KW - Field tests

KW - Hazard classes

KW - Natural durability

UR - http://www.scopus.com/inward/record.url?scp=77950040105&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:77950040105

VL - 54

SP - 131

EP - 140

JO - Drvna industrija

JF - Drvna industrija

SN - 0012-6772

IS - 3

ER -