Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 111-116 |
| Seitenumfang | 6 |
| Fachzeitschrift | Plastics, Rubber and Composites |
| Jahrgang | 44 |
| Ausgabenummer | 3 |
| Publikationsstatus | Veröffentlicht - 1 Apr. 2015 |
| Extern publiziert | Ja |
Abstract
In this paper investigations on the effect of the moisture content of thermoplastic CFRP on the laser induced heat affected zone (HAZ) and the resulting in-plane shear properties are presented. For this purpose carbon fibre reinforced polyetherimide (PEI) and polyphenylene sulphide (PPS) sheets were conditioned to different moisture contents and were then used for laser machining test specimens with contour and multipass cutting strategies. The extents of the HAZ were measured and in-plane shear tests were performed, revealing that the shear properties decrease when cutting material with high moisture content. This behaviour can be correlated with the type of HAZ which contains porosity caused by the vapourisation of water.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Keramische und Verbundwerkstoffe
- Chemische Verfahrenstechnik (insg.)
- Allgemeine chemische Verfahrenstechnik
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Plastics, Rubber and Composites, Jahrgang 44, Nr. 3, 01.04.2015, S. 111-116.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - The influence of moisture content on the heat affected zone and the resulting in-plane shear strength of laser cut thermoplastic CFRP
AU - Staehr, R.
AU - Bluemel, Sven
AU - Hansen, Peter
AU - Jaeschke, Peter
AU - Suttmann, Oliver
AU - Overmeyer, Ludger
PY - 2015/4/1
Y1 - 2015/4/1
N2 - In this paper investigations on the effect of the moisture content of thermoplastic CFRP on the laser induced heat affected zone (HAZ) and the resulting in-plane shear properties are presented. For this purpose carbon fibre reinforced polyetherimide (PEI) and polyphenylene sulphide (PPS) sheets were conditioned to different moisture contents and were then used for laser machining test specimens with contour and multipass cutting strategies. The extents of the HAZ were measured and in-plane shear tests were performed, revealing that the shear properties decrease when cutting material with high moisture content. This behaviour can be correlated with the type of HAZ which contains porosity caused by the vapourisation of water.
AB - In this paper investigations on the effect of the moisture content of thermoplastic CFRP on the laser induced heat affected zone (HAZ) and the resulting in-plane shear properties are presented. For this purpose carbon fibre reinforced polyetherimide (PEI) and polyphenylene sulphide (PPS) sheets were conditioned to different moisture contents and were then used for laser machining test specimens with contour and multipass cutting strategies. The extents of the HAZ were measured and in-plane shear tests were performed, revealing that the shear properties decrease when cutting material with high moisture content. This behaviour can be correlated with the type of HAZ which contains porosity caused by the vapourisation of water.
KW - Heat affected zone
KW - In-plane shear
KW - Laser cutting
KW - Laser processing
KW - Moisture content
KW - Thermoplastic CFRP
UR - http://www.scopus.com/inward/record.url?scp=84938917749&partnerID=8YFLogxK
U2 - 10.1179/1743289814y.0000000114
DO - 10.1179/1743289814y.0000000114
M3 - Article
AN - SCOPUS:84938917749
VL - 44
SP - 111
EP - 116
JO - Plastics, Rubber and Composites
JF - Plastics, Rubber and Composites
SN - 1465-8011
IS - 3
ER -