The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part I- Aged microstructure and micro-mechanical modeling

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autorschaft

  • Ken Gall
  • Huseyin Sehitoglu
  • Yuriy I. Chumlyakov
  • Irina V. Kireeva
  • Hans J. Maier

Externe Organisationen

  • University of Illinois Urbana-Champaign (UIUC)
  • Tomsk State University
  • Universität Siegen
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)19-27
Seitenumfang9
FachzeitschriftJournal of Engineering Materials and Technology, Transactions of the ASME
Jahrgang121
Ausgabenummer1
PublikationsstatusVeröffentlicht - Jan. 1999
Extern publiziertJa

Abstract

Transmission electron microscopy is used to determine the microstructures of a Ti- 50.8 at% Ni alloy given different aging treatments. Two different peak-aging treatments are shown to result in disk shaped semi-coherent Ti3Ni4 precipitates with a diameter ranging from 50 nm to 200 nm depending on the aging temperature. In the peak-aged materials, strong strain fields are clearly visible on TEM micrographs. An Eshelby based model is used to predict the local stress fields due to the differences in the lattice parameters of the precipitates and surrounding matrix. The position dependent local stress fields are then resolved onto the 24 different martensite correspondence variant pairs (CVP’s). It is further demonstrated that due to the unique orientation relationship that exists between the precipitate variants and the martensite CVP’s, the local resolved shear stresses are extremely large on some CVP’s and negligible on others. When the Ni rich NiTi is over-aged, it is found that the precipitates coarsen to approximately 1000 nm, they become in-coherent, and the local stress fields disappear. It is also determined that after over-aging the average composition of the matrix drops from 50.8 at% Ni to approximately 50.4 at% Ni. In a subsequent paper (part II) the results here are used to explain the dependence of the critical transformation stress levels and martensite start temperatures on the aging treatment.

ASJC Scopus Sachgebiete

Zitieren

The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part I- Aged microstructure and micro-mechanical modeling. / Gall, Ken; Sehitoglu, Huseyin; Chumlyakov, Yuriy I. et al.
in: Journal of Engineering Materials and Technology, Transactions of the ASME, Jahrgang 121, Nr. 1, 01.1999, S. 19-27.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Download
@article{cdff9d98abdc4423813b5f10c50dfd8a,
title = "The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part I- Aged microstructure and micro-mechanical modeling",
abstract = "Transmission electron microscopy is used to determine the microstructures of a Ti- 50.8 at% Ni alloy given different aging treatments. Two different peak-aging treatments are shown to result in disk shaped semi-coherent Ti3Ni4 precipitates with a diameter ranging from 50 nm to 200 nm depending on the aging temperature. In the peak-aged materials, strong strain fields are clearly visible on TEM micrographs. An Eshelby based model is used to predict the local stress fields due to the differences in the lattice parameters of the precipitates and surrounding matrix. The position dependent local stress fields are then resolved onto the 24 different martensite correspondence variant pairs (CVP{\textquoteright}s). It is further demonstrated that due to the unique orientation relationship that exists between the precipitate variants and the martensite CVP{\textquoteright}s, the local resolved shear stresses are extremely large on some CVP{\textquoteright}s and negligible on others. When the Ni rich NiTi is over-aged, it is found that the precipitates coarsen to approximately 1000 nm, they become in-coherent, and the local stress fields disappear. It is also determined that after over-aging the average composition of the matrix drops from 50.8 at% Ni to approximately 50.4 at% Ni. In a subsequent paper (part II) the results here are used to explain the dependence of the critical transformation stress levels and martensite start temperatures on the aging treatment.",
author = "Ken Gall and Huseyin Sehitoglu and Chumlyakov, {Yuriy I.} and Kireeva, {Irina V.} and Maier, {Hans J.}",
year = "1999",
month = jan,
doi = "10.1115/1.2815993",
language = "English",
volume = "121",
pages = "19--27",
journal = "Journal of Engineering Materials and Technology, Transactions of the ASME",
issn = "0094-4289",
publisher = "American Society of Mechanical Engineers(ASME)",
number = "1",

}

Download

TY - JOUR

T1 - The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi

T2 - Part I- Aged microstructure and micro-mechanical modeling

AU - Gall, Ken

AU - Sehitoglu, Huseyin

AU - Chumlyakov, Yuriy I.

AU - Kireeva, Irina V.

AU - Maier, Hans J.

PY - 1999/1

Y1 - 1999/1

N2 - Transmission electron microscopy is used to determine the microstructures of a Ti- 50.8 at% Ni alloy given different aging treatments. Two different peak-aging treatments are shown to result in disk shaped semi-coherent Ti3Ni4 precipitates with a diameter ranging from 50 nm to 200 nm depending on the aging temperature. In the peak-aged materials, strong strain fields are clearly visible on TEM micrographs. An Eshelby based model is used to predict the local stress fields due to the differences in the lattice parameters of the precipitates and surrounding matrix. The position dependent local stress fields are then resolved onto the 24 different martensite correspondence variant pairs (CVP’s). It is further demonstrated that due to the unique orientation relationship that exists between the precipitate variants and the martensite CVP’s, the local resolved shear stresses are extremely large on some CVP’s and negligible on others. When the Ni rich NiTi is over-aged, it is found that the precipitates coarsen to approximately 1000 nm, they become in-coherent, and the local stress fields disappear. It is also determined that after over-aging the average composition of the matrix drops from 50.8 at% Ni to approximately 50.4 at% Ni. In a subsequent paper (part II) the results here are used to explain the dependence of the critical transformation stress levels and martensite start temperatures on the aging treatment.

AB - Transmission electron microscopy is used to determine the microstructures of a Ti- 50.8 at% Ni alloy given different aging treatments. Two different peak-aging treatments are shown to result in disk shaped semi-coherent Ti3Ni4 precipitates with a diameter ranging from 50 nm to 200 nm depending on the aging temperature. In the peak-aged materials, strong strain fields are clearly visible on TEM micrographs. An Eshelby based model is used to predict the local stress fields due to the differences in the lattice parameters of the precipitates and surrounding matrix. The position dependent local stress fields are then resolved onto the 24 different martensite correspondence variant pairs (CVP’s). It is further demonstrated that due to the unique orientation relationship that exists between the precipitate variants and the martensite CVP’s, the local resolved shear stresses are extremely large on some CVP’s and negligible on others. When the Ni rich NiTi is over-aged, it is found that the precipitates coarsen to approximately 1000 nm, they become in-coherent, and the local stress fields disappear. It is also determined that after over-aging the average composition of the matrix drops from 50.8 at% Ni to approximately 50.4 at% Ni. In a subsequent paper (part II) the results here are used to explain the dependence of the critical transformation stress levels and martensite start temperatures on the aging treatment.

UR - http://www.scopus.com/inward/record.url?scp=0032762550&partnerID=8YFLogxK

U2 - 10.1115/1.2815993

DO - 10.1115/1.2815993

M3 - Article

AN - SCOPUS:0032762550

VL - 121

SP - 19

EP - 27

JO - Journal of Engineering Materials and Technology, Transactions of the ASME

JF - Journal of Engineering Materials and Technology, Transactions of the ASME

SN - 0094-4289

IS - 1

ER -

Von denselben Autoren