Details
Originalsprache | Englisch |
---|---|
Aufsatznummer | 014502 |
Fachzeitschrift | Journal of the Electrochemical Society |
Jahrgang | 169 |
Ausgabenummer | 1 |
Publikationsstatus | Veröffentlicht - 5 Jan. 2022 |
Abstract
Hydrogen crossover poses a crucial issue for polymer electrolyte membrane (PEM) water electrolysers in terms of safe operation and efficiency losses, especially at increased hydrogen pressures. Besides the impact of external operating conditions, the structural properties of the materials also influence the mass transport within the cell. In this study, we provide an analysis of the effect of elevated cathode pressures (up to 15 bar) in addition to increased compression of the membrane electrode assembly on hydrogen crossover and the cell performance, using thin Nafion 212 membranes and current densities up to 3.6 A cm-2. It is shown that a higher compression leads to increased mass transport overpotentials, although the overall cell performance is improved due to the decreased ohmic losses. The mass transport limitations also become visible in enhanced anodic hydrogen contents with increasing compression at high current densities. Moreover, increases in cathode pressure are amplifying the compression effect on hydrogen crossover and mass transport losses. The results indicate that the cell voltage should not be the only criterion for optimizing the system design, but that the material design has to be considered for the reduction of hydrogen crossover in PEM water electrolysis.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Energie (insg.)
- Erneuerbare Energien, Nachhaltigkeit und Umwelt
- Werkstoffwissenschaften (insg.)
- Oberflächen, Beschichtungen und Folien
- Chemie (insg.)
- Elektrochemie
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Ziele für nachhaltige Entwicklung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Journal of the Electrochemical Society, Jahrgang 169, Nr. 1, 014502, 05.01.2022.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - The Effect of Cell Compression and Cathode Pressure on Hydrogen Crossover in PEM Water Electrolysis
AU - Martin, Agate
AU - Trinke, Patrick
AU - St hler, Markus
AU - St hler, Andrea
AU - Scheepers, Fabian
AU - Bensmann, Boris
AU - Carmo, Marcelo
AU - Lehnert, Werner
AU - Hanke-Rauschenbach, Richard
N1 - Funding Information: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, ), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. Niedersächsisches Ministerium für Wissenschaft und Kultur https://doi.org/10.13039/501100010570 InnoEly (Grant No. ZN3771)
PY - 2022/1/5
Y1 - 2022/1/5
N2 - Hydrogen crossover poses a crucial issue for polymer electrolyte membrane (PEM) water electrolysers in terms of safe operation and efficiency losses, especially at increased hydrogen pressures. Besides the impact of external operating conditions, the structural properties of the materials also influence the mass transport within the cell. In this study, we provide an analysis of the effect of elevated cathode pressures (up to 15 bar) in addition to increased compression of the membrane electrode assembly on hydrogen crossover and the cell performance, using thin Nafion 212 membranes and current densities up to 3.6 A cm-2. It is shown that a higher compression leads to increased mass transport overpotentials, although the overall cell performance is improved due to the decreased ohmic losses. The mass transport limitations also become visible in enhanced anodic hydrogen contents with increasing compression at high current densities. Moreover, increases in cathode pressure are amplifying the compression effect on hydrogen crossover and mass transport losses. The results indicate that the cell voltage should not be the only criterion for optimizing the system design, but that the material design has to be considered for the reduction of hydrogen crossover in PEM water electrolysis.
AB - Hydrogen crossover poses a crucial issue for polymer electrolyte membrane (PEM) water electrolysers in terms of safe operation and efficiency losses, especially at increased hydrogen pressures. Besides the impact of external operating conditions, the structural properties of the materials also influence the mass transport within the cell. In this study, we provide an analysis of the effect of elevated cathode pressures (up to 15 bar) in addition to increased compression of the membrane electrode assembly on hydrogen crossover and the cell performance, using thin Nafion 212 membranes and current densities up to 3.6 A cm-2. It is shown that a higher compression leads to increased mass transport overpotentials, although the overall cell performance is improved due to the decreased ohmic losses. The mass transport limitations also become visible in enhanced anodic hydrogen contents with increasing compression at high current densities. Moreover, increases in cathode pressure are amplifying the compression effect on hydrogen crossover and mass transport losses. The results indicate that the cell voltage should not be the only criterion for optimizing the system design, but that the material design has to be considered for the reduction of hydrogen crossover in PEM water electrolysis.
UR - http://www.scopus.com/inward/record.url?scp=85123886864&partnerID=8YFLogxK
U2 - 10.1149/1945-7111/ac4459
DO - 10.1149/1945-7111/ac4459
M3 - Article
AN - SCOPUS:85123886864
VL - 169
JO - Journal of the Electrochemical Society
JF - Journal of the Electrochemical Society
SN - 0013-4651
IS - 1
M1 - 014502
ER -