Temperature and humidity control of a micro PEM fuel cell stack

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

Externe Organisationen

  • Max-Planck-Institut für Dynamik komplexer technischer Systeme
  • Otto-von-Guericke-Universität Magdeburg
  • Fraunhofer-Institut für Zuverlässigkeit und Mikrointegration (IZM)
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)949-959
Seitenumfang11
FachzeitschriftFUEL CELLS
Jahrgang10
Ausgabenummer10
PublikationsstatusVeröffentlicht - Dez. 2010
Extern publiziertJa

Abstract

This paper deals with the control of a miniaturised fuel cell system. A single air blower is used to control both heat and water management of the fuel cell. As the number of manipulated variables is smaller than the number of control variables, classical control algorithms are not applicable. To find a suitable controller, a system model is developed that shows the qualitatively same behaviour as the experimental setup. The dynamic behaviour of the model and the influence of the blower are studied by phase portraits. A control algorithm is then conceived by qualitative analysis of the phase portraits and tested in simulations.

Schlagwörter

    Miniature Fuel Cell Stack, PEM Fuel Cell, Humidity control, Proton exchange membrane fuel cells (PEMFC)

ASJC Scopus Sachgebiete

Ziele für nachhaltige Entwicklung

Zitieren

Temperature and humidity control of a micro PEM fuel cell stack. / Kunde, C.; Hanke-Rauschenbach, R.; Mangold, M. et al.
in: FUEL CELLS, Jahrgang 10, Nr. 10, 12.2010, S. 949-959.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Kunde, C, Hanke-Rauschenbach, R, Mangold, M, Kienle, A, Sundmacher, K, Wagner, S & Hahn, R 2010, 'Temperature and humidity control of a micro PEM fuel cell stack', FUEL CELLS, Jg. 10, Nr. 10, S. 949-959. https://doi.org/10.1002/fuce.201000022
Kunde, C., Hanke-Rauschenbach, R., Mangold, M., Kienle, A., Sundmacher, K., Wagner, S., & Hahn, R. (2010). Temperature and humidity control of a micro PEM fuel cell stack. FUEL CELLS, 10(10), 949-959. https://doi.org/10.1002/fuce.201000022
Kunde C, Hanke-Rauschenbach R, Mangold M, Kienle A, Sundmacher K, Wagner S et al. Temperature and humidity control of a micro PEM fuel cell stack. FUEL CELLS. 2010 Dez;10(10):949-959. doi: 10.1002/fuce.201000022
Kunde, C. ; Hanke-Rauschenbach, R. ; Mangold, M. et al. / Temperature and humidity control of a micro PEM fuel cell stack. in: FUEL CELLS. 2010 ; Jahrgang 10, Nr. 10. S. 949-959.
Download
@article{9eda63082b014a94b59885e98930b0f5,
title = "Temperature and humidity control of a micro PEM fuel cell stack",
abstract = "This paper deals with the control of a miniaturised fuel cell system. A single air blower is used to control both heat and water management of the fuel cell. As the number of manipulated variables is smaller than the number of control variables, classical control algorithms are not applicable. To find a suitable controller, a system model is developed that shows the qualitatively same behaviour as the experimental setup. The dynamic behaviour of the model and the influence of the blower are studied by phase portraits. A control algorithm is then conceived by qualitative analysis of the phase portraits and tested in simulations.",
keywords = "Control, Miniature Fuel Cell Stack, PEM Fuel Cell, Simulation, Miniature Fuel Cell Stack, PEM Fuel Cell, Humidity control, Proton exchange membrane fuel cells (PEMFC)",
author = "C. Kunde and R. Hanke-Rauschenbach and M. Mangold and A. Kienle and K. Sundmacher and S. Wagner and R. Hahn",
note = "Copyright: Copyright 2010 Elsevier B.V., All rights reserved.",
year = "2010",
month = dec,
doi = "10.1002/fuce.201000022",
language = "English",
volume = "10",
pages = "949--959",
journal = "FUEL CELLS",
issn = "1615-6846",
publisher = "John Wiley and Sons Ltd",
number = "10",

}

Download

TY - JOUR

T1 - Temperature and humidity control of a micro PEM fuel cell stack

AU - Kunde, C.

AU - Hanke-Rauschenbach, R.

AU - Mangold, M.

AU - Kienle, A.

AU - Sundmacher, K.

AU - Wagner, S.

AU - Hahn, R.

N1 - Copyright: Copyright 2010 Elsevier B.V., All rights reserved.

PY - 2010/12

Y1 - 2010/12

N2 - This paper deals with the control of a miniaturised fuel cell system. A single air blower is used to control both heat and water management of the fuel cell. As the number of manipulated variables is smaller than the number of control variables, classical control algorithms are not applicable. To find a suitable controller, a system model is developed that shows the qualitatively same behaviour as the experimental setup. The dynamic behaviour of the model and the influence of the blower are studied by phase portraits. A control algorithm is then conceived by qualitative analysis of the phase portraits and tested in simulations.

AB - This paper deals with the control of a miniaturised fuel cell system. A single air blower is used to control both heat and water management of the fuel cell. As the number of manipulated variables is smaller than the number of control variables, classical control algorithms are not applicable. To find a suitable controller, a system model is developed that shows the qualitatively same behaviour as the experimental setup. The dynamic behaviour of the model and the influence of the blower are studied by phase portraits. A control algorithm is then conceived by qualitative analysis of the phase portraits and tested in simulations.

KW - Control

KW - Miniature Fuel Cell Stack

KW - PEM Fuel Cell

KW - Simulation

KW - Miniature Fuel Cell Stack

KW - PEM Fuel Cell

KW - Humidity control

KW - Proton exchange membrane fuel cells (PEMFC)

UR - http://www.scopus.com/inward/record.url?scp=78649920777&partnerID=8YFLogxK

U2 - 10.1002/fuce.201000022

DO - 10.1002/fuce.201000022

M3 - Article

AN - SCOPUS:78649920777

VL - 10

SP - 949

EP - 959

JO - FUEL CELLS

JF - FUEL CELLS

SN - 1615-6846

IS - 10

ER -

Von denselben Autoren