Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 7343194 |
| Fachzeitschrift | Advances in polymer technology |
| Jahrgang | 2023 |
| Publikationsstatus | Veröffentlicht - 22 Aug. 2023 |
Abstract
The additive manufacturing (AM) of elastomeric parts based on high-viscosity reinforced rubbers has increasingly become a topic of scientific research in recent years. In addition to the viscosity, which is several decades higher during processing than the viscosities of thermoplastics, the flowability of the compound after the printing process and the necessary chemical crosslinking of the printed component play a decisive role in producing an elastic, high-quality, and geometrically stable part. After the first technological achievements using the so-called additive manufacturing of elastomers (AME) process, the knowledge gained has to be transferred first to concrete industrial parts. Therefore, in this study, the cure kinetics of a conventional rubber compound are tailored to match the specific requirements for scorch safety in the additive manufacturing of an industrial 2-component rod seal based on an acrylonitrile butadiene rubber O-ring in combination with a thermoplastic polyurethane as the base body. Experimental tests on a test rig for rod seals demonstrate the functionality of this additively manufactured 2-component rod seal.
ASJC Scopus Sachgebiete
- Chemische Verfahrenstechnik (insg.)
- Allgemeine chemische Verfahrenstechnik
- Chemie (insg.)
- Organische Chemie
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Advances in polymer technology, Jahrgang 2023, 7343194, 22.08.2023.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Tailoring the Curing Kinetics of NBR-Based Rubber Compounds for Additive Manufacturing of Rod Seals
AU - Sundermann, Lion
AU - Leineweber, Sebastian
AU - Klie, Benjamin
AU - Wittek, Heike
AU - Ebel, Thomas
AU - Reitz, Birger
AU - Ottink, Kathrin
AU - Graf, Matthias
AU - Lankenau, Tobias
AU - Overmeyer, Ludger
AU - Giese, Ulrich
N1 - Funding Information: The work was funded by the Deutsche Forschungsgemeinschaft (DFG) (project no. 447009134). Open Access funding enabled and organized by Projekt DEAL
PY - 2023/8/22
Y1 - 2023/8/22
N2 - The additive manufacturing (AM) of elastomeric parts based on high-viscosity reinforced rubbers has increasingly become a topic of scientific research in recent years. In addition to the viscosity, which is several decades higher during processing than the viscosities of thermoplastics, the flowability of the compound after the printing process and the necessary chemical crosslinking of the printed component play a decisive role in producing an elastic, high-quality, and geometrically stable part. After the first technological achievements using the so-called additive manufacturing of elastomers (AME) process, the knowledge gained has to be transferred first to concrete industrial parts. Therefore, in this study, the cure kinetics of a conventional rubber compound are tailored to match the specific requirements for scorch safety in the additive manufacturing of an industrial 2-component rod seal based on an acrylonitrile butadiene rubber O-ring in combination with a thermoplastic polyurethane as the base body. Experimental tests on a test rig for rod seals demonstrate the functionality of this additively manufactured 2-component rod seal.
AB - The additive manufacturing (AM) of elastomeric parts based on high-viscosity reinforced rubbers has increasingly become a topic of scientific research in recent years. In addition to the viscosity, which is several decades higher during processing than the viscosities of thermoplastics, the flowability of the compound after the printing process and the necessary chemical crosslinking of the printed component play a decisive role in producing an elastic, high-quality, and geometrically stable part. After the first technological achievements using the so-called additive manufacturing of elastomers (AME) process, the knowledge gained has to be transferred first to concrete industrial parts. Therefore, in this study, the cure kinetics of a conventional rubber compound are tailored to match the specific requirements for scorch safety in the additive manufacturing of an industrial 2-component rod seal based on an acrylonitrile butadiene rubber O-ring in combination with a thermoplastic polyurethane as the base body. Experimental tests on a test rig for rod seals demonstrate the functionality of this additively manufactured 2-component rod seal.
UR - http://www.scopus.com/inward/record.url?scp=85171896807&partnerID=8YFLogxK
U2 - 10.1155/2023/7343194
DO - 10.1155/2023/7343194
M3 - Article
AN - SCOPUS:85171896807
VL - 2023
JO - Advances in polymer technology
JF - Advances in polymer technology
SN - 0730-6679
M1 - 7343194
ER -