Successful endothelial monolayer formation on melt electrowritten scaffolds under dynamic conditions to mimic tunica intima

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)477-491
Seitenumfang15
FachzeitschriftInternational Journal of Bioprinting
Jahrgang10
Ausgabenummer1
PublikationsstatusVeröffentlicht - 11 Sept. 2023

Abstract

The lack of transplantable tissues and organs as well as the limitations of synthetic implants highlight the need for tissue-engineered constructs to obtain safe, long-lasting, and limitless tissue replacements. Scaffolds for cardiovascular applications, such as for a tissue-engineered vascular graft (TEVG), are thus highly required. For TEVGs, tubular scaffolds should support the formation of confluent endothelial layers in particular under dynamic conditions to prevent thrombosis and maintain hemostasis. For that purpose, a porous and highly diffusible scaffold structure is necessary to allow optimal cell adhesion as well as oxygen and nutrient exchange with the surrounding tissue. Here, we present a three-dimensional-printed scaffold made by a combination of fused deposition modeling (FDM) and melt electrowriting (MEW) out of polycaprolactone that enables monolayer formation and alignment of endothelial cells in the direction of medium flow under a shear stress of up to 10 dyn cm-2. Pore size and coating with human fibrin were optimized to enable confluent endothelial layers on the printed scaffold structures. Cell orientation and shape analysis showed a characteristic alignment and elongation of the tested endothelial cells with the direction of flow after dynamic cultivation. In contrast, melt electrospun scaffolds based on the same CAD design under comparable printing and cultivation conditions were not sufficient to form gapless cell layers. Thus, the new scaffold fabricated by MEW/FDM approach appears most suitable for TEVGs as a template for the innermost vascular wall layer, the tunica intima.

ASJC Scopus Sachgebiete

Zitieren

Successful endothelial monolayer formation on melt electrowritten scaffolds under dynamic conditions to mimic tunica intima. / Loewner, Sebastian; Heene, Sebastian; Cholewa, Fabian et al.
in: International Journal of Bioprinting, Jahrgang 10, Nr. 1, 11.09.2023, S. 477-491.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Loewner, Sebastian ; Heene, Sebastian ; Cholewa, Fabian et al. / Successful endothelial monolayer formation on melt electrowritten scaffolds under dynamic conditions to mimic tunica intima. in: International Journal of Bioprinting. 2023 ; Jahrgang 10, Nr. 1. S. 477-491.
Download
@article{b5ba765de9a24cf1aa8a6f1c919adf15,
title = "Successful endothelial monolayer formation on melt electrowritten scaffolds under dynamic conditions to mimic tunica intima",
abstract = "The lack of transplantable tissues and organs as well as the limitations of synthetic implants highlight the need for tissue-engineered constructs to obtain safe, long-lasting, and limitless tissue replacements. Scaffolds for cardiovascular applications, such as for a tissue-engineered vascular graft (TEVG), are thus highly required. For TEVGs, tubular scaffolds should support the formation of confluent endothelial layers in particular under dynamic conditions to prevent thrombosis and maintain hemostasis. For that purpose, a porous and highly diffusible scaffold structure is necessary to allow optimal cell adhesion as well as oxygen and nutrient exchange with the surrounding tissue. Here, we present a three-dimensional-printed scaffold made by a combination of fused deposition modeling (FDM) and melt electrowriting (MEW) out of polycaprolactone that enables monolayer formation and alignment of endothelial cells in the direction of medium flow under a shear stress of up to 10 dyn cm-2. Pore size and coating with human fibrin were optimized to enable confluent endothelial layers on the printed scaffold structures. Cell orientation and shape analysis showed a characteristic alignment and elongation of the tested endothelial cells with the direction of flow after dynamic cultivation. In contrast, melt electrospun scaffolds based on the same CAD design under comparable printing and cultivation conditions were not sufficient to form gapless cell layers. Thus, the new scaffold fabricated by MEW/FDM approach appears most suitable for TEVGs as a template for the innermost vascular wall layer, the tunica intima.",
keywords = "Dynamic cultivation, Endothelium, Melt electrowriting, Scaffold, Tissue engineering",
author = "Sebastian Loewner and Sebastian Heene and Fabian Cholewa and Henrik Heymann and Holger Blume and Cornelia Blume",
note = "Funding Information: This work was carried out within the framework of the SMART BIOTECS alliance between the Technische Universitaet Braunschweig and the Leibniz University Hannover. This initiative is supported by the Ministry of Economy and Culture (MWK) of Lower Saxony, Germany.",
year = "2023",
month = sep,
day = "11",
doi = "10.36922/ijb.1111",
language = "English",
volume = "10",
pages = "477--491",
number = "1",

}

Download

TY - JOUR

T1 - Successful endothelial monolayer formation on melt electrowritten scaffolds under dynamic conditions to mimic tunica intima

AU - Loewner, Sebastian

AU - Heene, Sebastian

AU - Cholewa, Fabian

AU - Heymann, Henrik

AU - Blume, Holger

AU - Blume, Cornelia

N1 - Funding Information: This work was carried out within the framework of the SMART BIOTECS alliance between the Technische Universitaet Braunschweig and the Leibniz University Hannover. This initiative is supported by the Ministry of Economy and Culture (MWK) of Lower Saxony, Germany.

PY - 2023/9/11

Y1 - 2023/9/11

N2 - The lack of transplantable tissues and organs as well as the limitations of synthetic implants highlight the need for tissue-engineered constructs to obtain safe, long-lasting, and limitless tissue replacements. Scaffolds for cardiovascular applications, such as for a tissue-engineered vascular graft (TEVG), are thus highly required. For TEVGs, tubular scaffolds should support the formation of confluent endothelial layers in particular under dynamic conditions to prevent thrombosis and maintain hemostasis. For that purpose, a porous and highly diffusible scaffold structure is necessary to allow optimal cell adhesion as well as oxygen and nutrient exchange with the surrounding tissue. Here, we present a three-dimensional-printed scaffold made by a combination of fused deposition modeling (FDM) and melt electrowriting (MEW) out of polycaprolactone that enables monolayer formation and alignment of endothelial cells in the direction of medium flow under a shear stress of up to 10 dyn cm-2. Pore size and coating with human fibrin were optimized to enable confluent endothelial layers on the printed scaffold structures. Cell orientation and shape analysis showed a characteristic alignment and elongation of the tested endothelial cells with the direction of flow after dynamic cultivation. In contrast, melt electrospun scaffolds based on the same CAD design under comparable printing and cultivation conditions were not sufficient to form gapless cell layers. Thus, the new scaffold fabricated by MEW/FDM approach appears most suitable for TEVGs as a template for the innermost vascular wall layer, the tunica intima.

AB - The lack of transplantable tissues and organs as well as the limitations of synthetic implants highlight the need for tissue-engineered constructs to obtain safe, long-lasting, and limitless tissue replacements. Scaffolds for cardiovascular applications, such as for a tissue-engineered vascular graft (TEVG), are thus highly required. For TEVGs, tubular scaffolds should support the formation of confluent endothelial layers in particular under dynamic conditions to prevent thrombosis and maintain hemostasis. For that purpose, a porous and highly diffusible scaffold structure is necessary to allow optimal cell adhesion as well as oxygen and nutrient exchange with the surrounding tissue. Here, we present a three-dimensional-printed scaffold made by a combination of fused deposition modeling (FDM) and melt electrowriting (MEW) out of polycaprolactone that enables monolayer formation and alignment of endothelial cells in the direction of medium flow under a shear stress of up to 10 dyn cm-2. Pore size and coating with human fibrin were optimized to enable confluent endothelial layers on the printed scaffold structures. Cell orientation and shape analysis showed a characteristic alignment and elongation of the tested endothelial cells with the direction of flow after dynamic cultivation. In contrast, melt electrospun scaffolds based on the same CAD design under comparable printing and cultivation conditions were not sufficient to form gapless cell layers. Thus, the new scaffold fabricated by MEW/FDM approach appears most suitable for TEVGs as a template for the innermost vascular wall layer, the tunica intima.

KW - Dynamic cultivation

KW - Endothelium

KW - Melt electrowriting

KW - Scaffold

KW - Tissue engineering

UR - http://www.scopus.com/inward/record.url?scp=85185494471&partnerID=8YFLogxK

U2 - 10.36922/ijb.1111

DO - 10.36922/ijb.1111

M3 - Article

AN - SCOPUS:85185494471

VL - 10

SP - 477

EP - 491

JO - International Journal of Bioprinting

JF - International Journal of Bioprinting

IS - 1

ER -

Von denselben Autoren