Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020 |
| Herausgeber (Verlag) | Institute of Electrical and Electronics Engineers Inc. |
| Seiten | 85-90 |
| Seitenumfang | 6 |
| ISBN (elektronisch) | 9781728170190 |
| ISBN (Print) | 978-1-7281-7018-3, 978-1-7281-7020-6 |
| Publikationsstatus | Veröffentlicht - 2020 |
| Veranstaltung | 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020 - Sorrento, Italien Dauer: 24 Juni 2020 → 26 Juni 2020 |
Abstract
This paper presents parametric models for high-frequency common- and differential-mode impedance analysis of electrical machines. The models are presented in terms of lumped equivalent circuit diagrams and their corresponding complex impedance equations. In order to parameterize the models, the differential evolution algorithm is used and a minimisation problem is defined. For model validation, the complex model impedance is compared to the measured impedance of eleven electrical machines of the same type. Furthermore, the lumped equivalent circuit parameters are individually identified for every single electrical machine and the resulting data is statistically interpreted. Moreover, detailed geometry and stator winding data as well as insulation material data of the investigated electrical machine are given. The intention is to enable more accurate simulations for EMC and insulation stress investigations as well as for filter and inverter designs.
ASJC Scopus Sachgebiete
- Energie (insg.)
- Energieanlagenbau und Kraftwerkstechnik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
- Ingenieurwesen (insg.)
- Maschinenbau
- Mathematik (insg.)
- Steuerung und Optimierung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020. Institute of Electrical and Electronics Engineers Inc., 2020. S. 85-90 9161915.
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Statistical deviation of high-frequency lumped model parameters for stator windings in three-phase electrical machines
AU - Hoffmann, Alexander
AU - Ponick, Bernd
N1 - Funding Information: Supported by: Federal Ministry of Economic Affairs and Energy on the basis of a decision by the German Bundestag
PY - 2020
Y1 - 2020
N2 - This paper presents parametric models for high-frequency common- and differential-mode impedance analysis of electrical machines. The models are presented in terms of lumped equivalent circuit diagrams and their corresponding complex impedance equations. In order to parameterize the models, the differential evolution algorithm is used and a minimisation problem is defined. For model validation, the complex model impedance is compared to the measured impedance of eleven electrical machines of the same type. Furthermore, the lumped equivalent circuit parameters are individually identified for every single electrical machine and the resulting data is statistically interpreted. Moreover, detailed geometry and stator winding data as well as insulation material data of the investigated electrical machine are given. The intention is to enable more accurate simulations for EMC and insulation stress investigations as well as for filter and inverter designs.
AB - This paper presents parametric models for high-frequency common- and differential-mode impedance analysis of electrical machines. The models are presented in terms of lumped equivalent circuit diagrams and their corresponding complex impedance equations. In order to parameterize the models, the differential evolution algorithm is used and a minimisation problem is defined. For model validation, the complex model impedance is compared to the measured impedance of eleven electrical machines of the same type. Furthermore, the lumped equivalent circuit parameters are individually identified for every single electrical machine and the resulting data is statistically interpreted. Moreover, detailed geometry and stator winding data as well as insulation material data of the investigated electrical machine are given. The intention is to enable more accurate simulations for EMC and insulation stress investigations as well as for filter and inverter designs.
KW - Common-mode
KW - Differential-mode
KW - Electrical machine
KW - Frequency response
KW - HF impedance
KW - HF lumped parameter model
KW - HF modeling
UR - http://www.scopus.com/inward/record.url?scp=85091180167&partnerID=8YFLogxK
U2 - 10.1109/speedam48782.2020.9161915
DO - 10.1109/speedam48782.2020.9161915
M3 - Conference contribution
AN - SCOPUS:85091180167
SN - 978-1-7281-7018-3
SN - 978-1-7281-7020-6
SP - 85
EP - 90
BT - 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020
Y2 - 24 June 2020 through 26 June 2020
ER -