Simulation of Negative and Positive Corona Discharges in Air for Investigation of Electromagnetic Waves Propagation

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Vahid Javandel
  • Asghar Akbari
  • Mohammad Ardebili
  • Peter Werle

Externe Organisationen

  • K.N. Toosi University of Technology
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)3169-3177
Seitenumfang9
FachzeitschriftIEEE Transactions on Plasma Science
Jahrgang50
Ausgabenummer9
PublikationsstatusVeröffentlicht - 1 Sept. 2022

Abstract

Corona discharge, as one of the partial discharge (PD) modes, emits electromagnetic (EM) waves in the ultrahigh frequency (UHF) range. In order to study the behavior of the EM waves emitted from a PD source, a comprehensive PD source modeling method should be employed that takes into account the essential processes involved in the formation of that. In this article, a drift- and diffusion-based model is presented to simulate the corona discharges in the positive and negative voltages to investigate the differences between these two types of corona and their characteristics in terms of the EM waves' propagation. This modeling tool includes ionization, attachment, and photoionization source terms as necessary phenomena to form the discharge. The results are analyzed for both types of coronas in the UHF range, and the differences between them are shown. Experimentally measured corona discharges using a high-frequency current transformers (HFCTs) and a monopole antenna probes are compared with the simulation current signals in the time and frequency domains, with promising results in terms of rise time and amplitude of the signal.

ASJC Scopus Sachgebiete

Zitieren

Simulation of Negative and Positive Corona Discharges in Air for Investigation of Electromagnetic Waves Propagation. / Javandel, Vahid; Akbari, Asghar; Ardebili, Mohammad et al.
in: IEEE Transactions on Plasma Science, Jahrgang 50, Nr. 9, 01.09.2022, S. 3169-3177.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Javandel, Vahid ; Akbari, Asghar ; Ardebili, Mohammad et al. / Simulation of Negative and Positive Corona Discharges in Air for Investigation of Electromagnetic Waves Propagation. in: IEEE Transactions on Plasma Science. 2022 ; Jahrgang 50, Nr. 9. S. 3169-3177.
Download
@article{b90c40e49de64df2a720ab4b0e1815a5,
title = "Simulation of Negative and Positive Corona Discharges in Air for Investigation of Electromagnetic Waves Propagation",
abstract = "Corona discharge, as one of the partial discharge (PD) modes, emits electromagnetic (EM) waves in the ultrahigh frequency (UHF) range. In order to study the behavior of the EM waves emitted from a PD source, a comprehensive PD source modeling method should be employed that takes into account the essential processes involved in the formation of that. In this article, a drift- and diffusion-based model is presented to simulate the corona discharges in the positive and negative voltages to investigate the differences between these two types of corona and their characteristics in terms of the EM waves' propagation. This modeling tool includes ionization, attachment, and photoionization source terms as necessary phenomena to form the discharge. The results are analyzed for both types of coronas in the UHF range, and the differences between them are shown. Experimentally measured corona discharges using a high-frequency current transformers (HFCTs) and a monopole antenna probes are compared with the simulation current signals in the time and frequency domains, with promising results in terms of rise time and amplitude of the signal.",
keywords = "Corona discharge, driftadiffusion model, electromagnetic (EM) waves propagation, partial discharge (PD), ultrahigh frequency (UHF)",
author = "Vahid Javandel and Asghar Akbari and Mohammad Ardebili and Peter Werle",
year = "2022",
month = sep,
day = "1",
doi = "10.1109/TPS.2022.3194836",
language = "English",
volume = "50",
pages = "3169--3177",
journal = "IEEE Transactions on Plasma Science",
issn = "0093-3813",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "9",

}

Download

TY - JOUR

T1 - Simulation of Negative and Positive Corona Discharges in Air for Investigation of Electromagnetic Waves Propagation

AU - Javandel, Vahid

AU - Akbari, Asghar

AU - Ardebili, Mohammad

AU - Werle, Peter

PY - 2022/9/1

Y1 - 2022/9/1

N2 - Corona discharge, as one of the partial discharge (PD) modes, emits electromagnetic (EM) waves in the ultrahigh frequency (UHF) range. In order to study the behavior of the EM waves emitted from a PD source, a comprehensive PD source modeling method should be employed that takes into account the essential processes involved in the formation of that. In this article, a drift- and diffusion-based model is presented to simulate the corona discharges in the positive and negative voltages to investigate the differences between these two types of corona and their characteristics in terms of the EM waves' propagation. This modeling tool includes ionization, attachment, and photoionization source terms as necessary phenomena to form the discharge. The results are analyzed for both types of coronas in the UHF range, and the differences between them are shown. Experimentally measured corona discharges using a high-frequency current transformers (HFCTs) and a monopole antenna probes are compared with the simulation current signals in the time and frequency domains, with promising results in terms of rise time and amplitude of the signal.

AB - Corona discharge, as one of the partial discharge (PD) modes, emits electromagnetic (EM) waves in the ultrahigh frequency (UHF) range. In order to study the behavior of the EM waves emitted from a PD source, a comprehensive PD source modeling method should be employed that takes into account the essential processes involved in the formation of that. In this article, a drift- and diffusion-based model is presented to simulate the corona discharges in the positive and negative voltages to investigate the differences between these two types of corona and their characteristics in terms of the EM waves' propagation. This modeling tool includes ionization, attachment, and photoionization source terms as necessary phenomena to form the discharge. The results are analyzed for both types of coronas in the UHF range, and the differences between them are shown. Experimentally measured corona discharges using a high-frequency current transformers (HFCTs) and a monopole antenna probes are compared with the simulation current signals in the time and frequency domains, with promising results in terms of rise time and amplitude of the signal.

KW - Corona discharge

KW - driftadiffusion model

KW - electromagnetic (EM) waves propagation

KW - partial discharge (PD)

KW - ultrahigh frequency (UHF)

UR - http://www.scopus.com/inward/record.url?scp=85136866719&partnerID=8YFLogxK

U2 - 10.1109/TPS.2022.3194836

DO - 10.1109/TPS.2022.3194836

M3 - Article

AN - SCOPUS:85136866719

VL - 50

SP - 3169

EP - 3177

JO - IEEE Transactions on Plasma Science

JF - IEEE Transactions on Plasma Science

SN - 0093-3813

IS - 9

ER -

Von denselben Autoren