Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 04023002 |
| Fachzeitschrift | Journal of Waterway, Port, Coastal and Ocean Engineering |
| Jahrgang | 149 |
| Ausgabenummer | 3 |
| Frühes Online-Datum | 21 Feb. 2023 |
| Publikationsstatus | Veröffentlicht - Mai 2023 |
Abstract
River training structures, such as groynes or spur-dikes, are subject to intensifying ship-induced loads, owing to increasing ship dimensions and traffic density on waterways. In particular, the long-period primary wave system differs from other loading components, such as short-period wind waves, owing to the long wave length. To date, this loading scenario is not reflected within the empirical based design approaches for groynes. In this study, numerical approaches based on shallow water theory and computational fluid dynamics (CFD) are employed for deriving groyne design parameters, particularly by assuming stationary load conditions. Firstly, the numerical tools REEF3D::CFD and REEF3D::SFLOW are validated for the specific parameter range of ship-induced groyne overtopping based on an experimental data set. Secondly, numerical simulations at the prototype scale are connected with empirical equations for armor layer design. Comparing the results with field data from groyne prototypes indicates that the combined approach yields plausible required armor layer dimensions. Further, the examination of geometric variations of groynes confirms that a reduction in groyne slope can reduce the required armor layer dimensions by approximately 10%.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Tief- und Ingenieurbau
- Umweltwissenschaften (insg.)
- Gewässerkunde und -technologie
- Ingenieurwesen (insg.)
- Meerestechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Journal of Waterway, Port, Coastal and Ocean Engineering, Jahrgang 149, Nr. 3, 04023002, 05.2023.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Ship Wave-Induced Hydraulic Loading on Estuarine Groins
T2 - A Conceptual Numerical Study
AU - Dempwolff, León Carlos
AU - Windt, Christian
AU - Melling, Gregor
AU - Bihs, Hans
AU - Holzwarth, Ingrid
AU - Goseberg, Nils
N1 - This study is part of the research project NumSiSSI (Numerical Simulation of Shipwave–Structure Interaction in Coastal Areas), conducted in cooperation with the German Federal Waterways Engineering and Research Institute (BAW).
PY - 2023/5
Y1 - 2023/5
N2 - River training structures, such as groynes or spur-dikes, are subject to intensifying ship-induced loads, owing to increasing ship dimensions and traffic density on waterways. In particular, the long-period primary wave system differs from other loading components, such as short-period wind waves, owing to the long wave length. To date, this loading scenario is not reflected within the empirical based design approaches for groynes. In this study, numerical approaches based on shallow water theory and computational fluid dynamics (CFD) are employed for deriving groyne design parameters, particularly by assuming stationary load conditions. Firstly, the numerical tools REEF3D::CFD and REEF3D::SFLOW are validated for the specific parameter range of ship-induced groyne overtopping based on an experimental data set. Secondly, numerical simulations at the prototype scale are connected with empirical equations for armor layer design. Comparing the results with field data from groyne prototypes indicates that the combined approach yields plausible required armor layer dimensions. Further, the examination of geometric variations of groynes confirms that a reduction in groyne slope can reduce the required armor layer dimensions by approximately 10%.
AB - River training structures, such as groynes or spur-dikes, are subject to intensifying ship-induced loads, owing to increasing ship dimensions and traffic density on waterways. In particular, the long-period primary wave system differs from other loading components, such as short-period wind waves, owing to the long wave length. To date, this loading scenario is not reflected within the empirical based design approaches for groynes. In this study, numerical approaches based on shallow water theory and computational fluid dynamics (CFD) are employed for deriving groyne design parameters, particularly by assuming stationary load conditions. Firstly, the numerical tools REEF3D::CFD and REEF3D::SFLOW are validated for the specific parameter range of ship-induced groyne overtopping based on an experimental data set. Secondly, numerical simulations at the prototype scale are connected with empirical equations for armor layer design. Comparing the results with field data from groyne prototypes indicates that the combined approach yields plausible required armor layer dimensions. Further, the examination of geometric variations of groynes confirms that a reduction in groyne slope can reduce the required armor layer dimensions by approximately 10%.
UR - http://www.scopus.com/inward/record.url?scp=85148880395&partnerID=8YFLogxK
U2 - 10.1061/JWPED5.WWENG-1937
DO - 10.1061/JWPED5.WWENG-1937
M3 - Article
AN - SCOPUS:85148880395
VL - 149
JO - Journal of Waterway, Port, Coastal and Ocean Engineering
JF - Journal of Waterway, Port, Coastal and Ocean Engineering
SN - 0733-950X
IS - 3
M1 - 04023002
ER -