Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | High-Power Laser Materials Processing |
| Untertitel | Applications, Diagnostics, and Systems XII |
| Herausgeber/-innen | Stefan Kaierle, Klaus R. Kleine |
| Herausgeber (Verlag) | SPIE |
| ISBN (elektronisch) | 9781510659339 |
| Publikationsstatus | Veröffentlicht - 15 März 2023 |
| Veranstaltung | High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII 2023 - San Francisco, USA / Vereinigte Staaten Dauer: 1 Feb. 2023 → 2 Feb. 2023 |
Publikationsreihe
| Name | Proceedings of SPIE - The International Society for Optical Engineering |
|---|---|
| Band | 12414 |
| ISSN (Print) | 0277-786X |
| ISSN (elektronisch) | 1996-756X |
Abstract
The Laser assisted double wire with non-transferred arc surfacing process (LDNA) is based on an electric arc to melt the filling wires and a laser beam to shape the melt pool. This work investigates the welding seam characteristics for different oscillation amplitudes with differing laser output power. Therefore, three laser powers between 1,000 W and 2,000 W in combination with a power of 4,800 W brought by the arc are investigated regarding the resulting seam geometry and the dilution ratio. A linear oscillation pattern is used with a constant oscillation frequency of 10 Hz. The investigations are conducted using AISI 316L welding wires of 1.2 mm in diameter and sandblasted AISI 1024 plates of 20 mm thickness. Cross-sections are analyzed to investigate the occurrence of cracks and pores as well as to determine the dilution ratio with the base material. The welding seam geometry is measured with a laser scanning microscope Keyence VK-X1100. The topology of adjacent welding seams is examined showing an increase of the welding seam width with an increase of the oscillation amplitude and the laser output power. Thus, a higher maximal seam width can be applied by adjusting the laser power.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Informatik (insg.)
- Angewandte Informatik
- Mathematik (insg.)
- Angewandte Mathematik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII. Hrsg. / Stefan Kaierle; Klaus R. Kleine. SPIE, 2023. 124140D (Proceedings of SPIE - The International Society for Optical Engineering; Band 12414).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Seam geometry manipulation by oscillation amplitude adjustment in the LDNA process
AU - Bokelmann, T.
AU - Lammers, M.
AU - Kaierle, S.
AU - Emadmostoufi, S.
AU - Mokrov, O.
AU - Sharma, R.
AU - Reisgen, U.
AU - Hermsdorf, J.
N1 - Funding Information: The investigations have been carried out within the research project DFG 423140171. The authors would like to express their special gratitude to the German Research Foundation (DFG).
PY - 2023/3/15
Y1 - 2023/3/15
N2 - The Laser assisted double wire with non-transferred arc surfacing process (LDNA) is based on an electric arc to melt the filling wires and a laser beam to shape the melt pool. This work investigates the welding seam characteristics for different oscillation amplitudes with differing laser output power. Therefore, three laser powers between 1,000 W and 2,000 W in combination with a power of 4,800 W brought by the arc are investigated regarding the resulting seam geometry and the dilution ratio. A linear oscillation pattern is used with a constant oscillation frequency of 10 Hz. The investigations are conducted using AISI 316L welding wires of 1.2 mm in diameter and sandblasted AISI 1024 plates of 20 mm thickness. Cross-sections are analyzed to investigate the occurrence of cracks and pores as well as to determine the dilution ratio with the base material. The welding seam geometry is measured with a laser scanning microscope Keyence VK-X1100. The topology of adjacent welding seams is examined showing an increase of the welding seam width with an increase of the oscillation amplitude and the laser output power. Thus, a higher maximal seam width can be applied by adjusting the laser power.
AB - The Laser assisted double wire with non-transferred arc surfacing process (LDNA) is based on an electric arc to melt the filling wires and a laser beam to shape the melt pool. This work investigates the welding seam characteristics for different oscillation amplitudes with differing laser output power. Therefore, three laser powers between 1,000 W and 2,000 W in combination with a power of 4,800 W brought by the arc are investigated regarding the resulting seam geometry and the dilution ratio. A linear oscillation pattern is used with a constant oscillation frequency of 10 Hz. The investigations are conducted using AISI 316L welding wires of 1.2 mm in diameter and sandblasted AISI 1024 plates of 20 mm thickness. Cross-sections are analyzed to investigate the occurrence of cracks and pores as well as to determine the dilution ratio with the base material. The welding seam geometry is measured with a laser scanning microscope Keyence VK-X1100. The topology of adjacent welding seams is examined showing an increase of the welding seam width with an increase of the oscillation amplitude and the laser output power. Thus, a higher maximal seam width can be applied by adjusting the laser power.
KW - Laser assisted
KW - Laser assisted double wire with non-transferred arc surfacing process
KW - Laser beam influence
KW - Laser beam oscillation
KW - LDNA
KW - Melt pool shaping
UR - http://www.scopus.com/inward/record.url?scp=85159777496&partnerID=8YFLogxK
U2 - 10.1117/12.2648703
DO - 10.1117/12.2648703
M3 - Conference contribution
AN - SCOPUS:85159777496
T3 - Proceedings of SPIE - The International Society for Optical Engineering
BT - High-Power Laser Materials Processing
A2 - Kaierle, Stefan
A2 - Kleine, Klaus R.
PB - SPIE
T2 - High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII 2023
Y2 - 1 February 2023 through 2 February 2023
ER -