Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 1541-1546 |
| Seitenumfang | 6 |
| Fachzeitschrift | Procedia Engineering |
| Jahrgang | 81 |
| Publikationsstatus | Veröffentlicht - 1 Jan. 2014 |
| Veranstaltung | 11th International Conference on Technology of Plasticity, ICTP 2014 - Nagoya, Japan Dauer: 19 Okt. 2014 → 24 Okt. 2014 |
Abstract
In the present study experimental results of twin-roll cast aluminium-steel clad strips of a thickness of 2.0 mm using the example of pure aluminium and an austenitic steel are presented. Electron probe measurements of the bonding area revealed the presence of a continuous interface layer of about 2 μm. To verify the formability of the twin-roll cast clad strips, sandwich samples were cold rolled with up to 66% strain. Furthermore, the sandwich samples were hot rolled at the temperature of 300 °C with different strain values. Mechanical properties, the microstructure and the surface quality of the deformed compound after rolling were analysed. To test ductility and formability of the rolled strips these were cold deep drawn.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Allgemeiner Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Procedia Engineering, Jahrgang 81, 01.01.2014, S. 1541-1546.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Sandwich rolling of twin-roll cast aluminium-steel clad strips
AU - Stolbchenko, Mykhailo
AU - Grydin, Olexandr
AU - Nürnberger, Florian
AU - Samsonenko, Andrii
AU - Schaper, Mirko
N1 - Funding information: The authors would like to thank the German Research Foundation (DFG) for its financial support of the scientific work carried out within the scope of the project SCHA1484/21-1 and Dipl.-Wirt.-Ing. H. C. Schmidt from Chair of Forming and Machining Technology, University of Paderborn for performing deep drawing tests.
PY - 2014/1/1
Y1 - 2014/1/1
N2 - In the present study experimental results of twin-roll cast aluminium-steel clad strips of a thickness of 2.0 mm using the example of pure aluminium and an austenitic steel are presented. Electron probe measurements of the bonding area revealed the presence of a continuous interface layer of about 2 μm. To verify the formability of the twin-roll cast clad strips, sandwich samples were cold rolled with up to 66% strain. Furthermore, the sandwich samples were hot rolled at the temperature of 300 °C with different strain values. Mechanical properties, the microstructure and the surface quality of the deformed compound after rolling were analysed. To test ductility and formability of the rolled strips these were cold deep drawn.
AB - In the present study experimental results of twin-roll cast aluminium-steel clad strips of a thickness of 2.0 mm using the example of pure aluminium and an austenitic steel are presented. Electron probe measurements of the bonding area revealed the presence of a continuous interface layer of about 2 μm. To verify the formability of the twin-roll cast clad strips, sandwich samples were cold rolled with up to 66% strain. Furthermore, the sandwich samples were hot rolled at the temperature of 300 °C with different strain values. Mechanical properties, the microstructure and the surface quality of the deformed compound after rolling were analysed. To test ductility and formability of the rolled strips these were cold deep drawn.
KW - Aluminium-steel clad strips
KW - Cold and hot rolling
KW - Mechanical properties
KW - Microstructure
KW - Twin-roll casting
UR - http://www.scopus.com/inward/record.url?scp=84949123328&partnerID=8YFLogxK
U2 - 10.1016/j.proeng.2014.10.187
DO - 10.1016/j.proeng.2014.10.187
M3 - Conference article
AN - SCOPUS:84949123328
VL - 81
SP - 1541
EP - 1546
JO - Procedia Engineering
JF - Procedia Engineering
SN - 1877-7058
T2 - 11th International Conference on Technology of Plasticity, ICTP 2014
Y2 - 19 October 2014 through 24 October 2014
ER -