Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 6963267 |
| Seiten (von - bis) | 189-194 |
| Seitenumfang | 6 |
| Fachzeitschrift | IEEE journal of photovoltaics |
| Jahrgang | 5 |
| Ausgabenummer | 1 |
| Publikationsstatus | Veröffentlicht - 20 Nov. 2014 |
Abstract
In photovoltaic (PV) modules, the interconnection of solar cells is critical in terms of mechanical stability and resistive power losses. In this study, we analyze the interconnection of large-area 15.6 × 15.6 cm2 industrial p-type passivated emitter and rear cell (PERC) solar cells in terms of resistive losses. For our analysis, we prepare a 3 × 3 minimodule from PERC solar cells with soldering pads and efficiencies up to 20.0%. We measure a significant cell-to-module (CTM) power loss of 8% at this module. For comparison, we prepare a 3 × 6 module consisting of halved 7.8 × 15.6 cm2 PERC solar cells. Using a nanosecond laser to cut the finished solar cell in two pieces, no additional power loss is introduced by cutting. The CTM factor of 1.0 determined at the 3 × 6 module is explained using an analytical model describing the series resistance of the module interconnection. Using this model, we estimate for our current PERC cell generation and module process an output power of 275 W for 60 full-size cells and 285 W for 120 halved cells.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Ziele für nachhaltige Entwicklung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: IEEE journal of photovoltaics, Jahrgang 5, Nr. 1, 6963267, 20.11.2014, S. 189-194.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Resistive power loss analysis of PV modules made from halved 15.6 × 15.6 cm2 silicon PERC solar cells with efficiencies up to 20.0%
AU - Muller, Jens
AU - Hinken, David
AU - Blankemeyer, Susanne
AU - Kohlenberg, Heike
AU - Sonntag, Ulrike
AU - Bothe, Karsten
AU - Dullweber, Thorsten
AU - Kontges, Marc
AU - Brendel, Rolf
N1 - Publisher Copyright: © 2011-2012 IEEE.
PY - 2014/11/20
Y1 - 2014/11/20
N2 - In photovoltaic (PV) modules, the interconnection of solar cells is critical in terms of mechanical stability and resistive power losses. In this study, we analyze the interconnection of large-area 15.6 × 15.6 cm2 industrial p-type passivated emitter and rear cell (PERC) solar cells in terms of resistive losses. For our analysis, we prepare a 3 × 3 minimodule from PERC solar cells with soldering pads and efficiencies up to 20.0%. We measure a significant cell-to-module (CTM) power loss of 8% at this module. For comparison, we prepare a 3 × 6 module consisting of halved 7.8 × 15.6 cm2 PERC solar cells. Using a nanosecond laser to cut the finished solar cell in two pieces, no additional power loss is introduced by cutting. The CTM factor of 1.0 determined at the 3 × 6 module is explained using an analytical model describing the series resistance of the module interconnection. Using this model, we estimate for our current PERC cell generation and module process an output power of 275 W for 60 full-size cells and 285 W for 120 halved cells.
AB - In photovoltaic (PV) modules, the interconnection of solar cells is critical in terms of mechanical stability and resistive power losses. In this study, we analyze the interconnection of large-area 15.6 × 15.6 cm2 industrial p-type passivated emitter and rear cell (PERC) solar cells in terms of resistive losses. For our analysis, we prepare a 3 × 3 minimodule from PERC solar cells with soldering pads and efficiencies up to 20.0%. We measure a significant cell-to-module (CTM) power loss of 8% at this module. For comparison, we prepare a 3 × 6 module consisting of halved 7.8 × 15.6 cm2 PERC solar cells. Using a nanosecond laser to cut the finished solar cell in two pieces, no additional power loss is introduced by cutting. The CTM factor of 1.0 determined at the 3 × 6 module is explained using an analytical model describing the series resistance of the module interconnection. Using this model, we estimate for our current PERC cell generation and module process an output power of 275 W for 60 full-size cells and 285 W for 120 halved cells.
KW - Device simulation
KW - module interconnection passivated emitter and rear cell (PERC) solar cells
KW - resistive power loss
UR - http://www.scopus.com/inward/record.url?scp=84919914946&partnerID=8YFLogxK
U2 - 10.1109/JPHOTOV.2014.2367868
DO - 10.1109/JPHOTOV.2014.2367868
M3 - Article
AN - SCOPUS:84919914946
VL - 5
SP - 189
EP - 194
JO - IEEE journal of photovoltaics
JF - IEEE journal of photovoltaics
SN - 2156-3381
IS - 1
M1 - 6963267
ER -