Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 504-511 |
| Seitenumfang | 8 |
| Fachzeitschrift | Key Engineering Materials |
| Jahrgang | 822 |
| Frühes Online-Datum | 24 Sept. 2019 |
| Publikationsstatus | Veröffentlicht - 2019 |
| Veranstaltung | International Scientific Conference on New Materials and Technologies in Mechanical Engineering, NMTME 2019 - St. Petersburg, Russland Dauer: 12 März 2019 → 15 März 2019 |
Abstract
In comparison with other additive methods, the wire additive manufacturing has some advantages, chief among: high deposition rate and low price for consumables. Otherwise there are some disadvantages such as a high level of internal defects (hot, cold cracks, pores). Adding laser radiation to a WAAM process can significantly reduce data flaws. In this paper outlined research results on the effect of laser radiation (pulsed and permanent) on structure and internal defects of deposit layers to create three-component structures from AlMg6 alloy. Reported samples was made by using hybrid laser-arc method and by applying a single laser. Presented photos of macrosections of obtained samples. Spectral analysis was performed to identify the nature of changes of grains in different processes. Were made the measurements of internal defects and chemical analysis of the obtained walls.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Ingenieurwesen (insg.)
- Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Key Engineering Materials, Jahrgang 822, 2019, S. 504-511.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Research of the structure defects at wire-feed laser and laser-arc deposition with almg6
AU - Voropaev, A. A.
AU - Akhmetov, A. D.
AU - Hassel, T.
AU - Klimov, G. G.
PY - 2019
Y1 - 2019
N2 - In comparison with other additive methods, the wire additive manufacturing has some advantages, chief among: high deposition rate and low price for consumables. Otherwise there are some disadvantages such as a high level of internal defects (hot, cold cracks, pores). Adding laser radiation to a WAAM process can significantly reduce data flaws. In this paper outlined research results on the effect of laser radiation (pulsed and permanent) on structure and internal defects of deposit layers to create three-component structures from AlMg6 alloy. Reported samples was made by using hybrid laser-arc method and by applying a single laser. Presented photos of macrosections of obtained samples. Spectral analysis was performed to identify the nature of changes of grains in different processes. Were made the measurements of internal defects and chemical analysis of the obtained walls.
AB - In comparison with other additive methods, the wire additive manufacturing has some advantages, chief among: high deposition rate and low price for consumables. Otherwise there are some disadvantages such as a high level of internal defects (hot, cold cracks, pores). Adding laser radiation to a WAAM process can significantly reduce data flaws. In this paper outlined research results on the effect of laser radiation (pulsed and permanent) on structure and internal defects of deposit layers to create three-component structures from AlMg6 alloy. Reported samples was made by using hybrid laser-arc method and by applying a single laser. Presented photos of macrosections of obtained samples. Spectral analysis was performed to identify the nature of changes of grains in different processes. Were made the measurements of internal defects and chemical analysis of the obtained walls.
KW - Hybrid laser arc technology
KW - MIG torch
KW - Pulse laser mode
KW - Wire and laser additive manufacturing
KW - СW laser mode
UR - http://www.scopus.com/inward/record.url?scp=85106037159&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/KEM.822.504
DO - 10.4028/www.scientific.net/KEM.822.504
M3 - Conference article
AN - SCOPUS:85106037159
VL - 822
SP - 504
EP - 511
JO - Key Engineering Materials
JF - Key Engineering Materials
SN - 1013-9826
T2 - International Scientific Conference on New Materials and Technologies in Mechanical Engineering, NMTME 2019
Y2 - 12 March 2019 through 15 March 2019
ER -