Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Autoren

  • Michael Hartje
  • Bernhard Schober
  • Uwe Schichler
  • Javier Torres
  • Peter Werle

Externe Organisationen

  • Hochschule Bremen
  • Technische Universität Graz
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Titel des SammelwerksVDE High Voltage Technology
Herausgeber (Verlag)VDE Verlag GmbH
Seiten424-429
Seitenumfang6
ISBN (elektronisch)9783800753550
PublikationsstatusVeröffentlicht - 1 Jan. 2021
VeranstaltungVDE High Voltage Technology 2020 - Virtual, Online, Deutschland
Dauer: 9 Nov. 202011 Nov. 2020

Publikationsreihe

NameVDE High Voltage Technology

Abstract

Partial discharge measurement at AC voltage is one of the most important diagnostic tools for testing and evaluating the condition of high-voltage equipment. The requirements for the measuring system, the test setup and the test procedure as well as the evaluation methods are defined in IEC 60270. Acceptance criteria and measurement procedures are defined in the corresponding standards of the different equipment. For partial discharge measurements under DC voltage stress, the requirements have to be questioned, due to the different partial discharge behaviour of some defects and the lack of experience at DC voltage. Due to the increasing use of HVDC transmission systems in the future transmission grid, partial discharge measurement under DC voltage is becoming more and more important. For this reason, the applicability of IEC 60270 for partial discharge measurements under DC voltage was examined in different round-robin tests. After the already published measurement results on epoxy insulators and measurements on a needle-plate arrangement, this paper presents investigations on surface discharge arrangements and analyses, compares and discusses the results of the different laboratories.

ASJC Scopus Sachgebiete

Zitieren

Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages. / Hartje, Michael; Schober, Bernhard; Schichler, Uwe et al.
VDE High Voltage Technology. VDE Verlag GmbH, 2021. S. 424-429 (VDE High Voltage Technology).

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Hartje, M, Schober, B, Schichler, U, Torres, J & Werle, P 2021, Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages. in VDE High Voltage Technology. VDE High Voltage Technology, VDE Verlag GmbH, S. 424-429, VDE High Voltage Technology 2020, Virtual, Online, Deutschland, 9 Nov. 2020. https://doi.org/10.1049/icp.2022.0224
Hartje, M., Schober, B., Schichler, U., Torres, J., & Werle, P. (2021). Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages. In VDE High Voltage Technology (S. 424-429). (VDE High Voltage Technology). VDE Verlag GmbH. https://doi.org/10.1049/icp.2022.0224
Hartje M, Schober B, Schichler U, Torres J, Werle P. Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages. in VDE High Voltage Technology. VDE Verlag GmbH. 2021. S. 424-429. (VDE High Voltage Technology). doi: 10.1049/icp.2022.0224
Hartje, Michael ; Schober, Bernhard ; Schichler, Uwe et al. / Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages. VDE High Voltage Technology. VDE Verlag GmbH, 2021. S. 424-429 (VDE High Voltage Technology).
Download
@inproceedings{cf009cf0b6714a3ca910579c254d4152,
title = "Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages",
abstract = "Partial discharge measurement at AC voltage is one of the most important diagnostic tools for testing and evaluating the condition of high-voltage equipment. The requirements for the measuring system, the test setup and the test procedure as well as the evaluation methods are defined in IEC 60270. Acceptance criteria and measurement procedures are defined in the corresponding standards of the different equipment. For partial discharge measurements under DC voltage stress, the requirements have to be questioned, due to the different partial discharge behaviour of some defects and the lack of experience at DC voltage. Due to the increasing use of HVDC transmission systems in the future transmission grid, partial discharge measurement under DC voltage is becoming more and more important. For this reason, the applicability of IEC 60270 for partial discharge measurements under DC voltage was examined in different round-robin tests. After the already published measurement results on epoxy insulators and measurements on a needle-plate arrangement, this paper presents investigations on surface discharge arrangements and analyses, compares and discusses the results of the different laboratories.",
author = "Michael Hartje and Bernhard Schober and Uwe Schichler and Javier Torres and Peter Werle",
year = "2021",
month = jan,
day = "1",
doi = "10.1049/icp.2022.0224",
language = "English",
series = "VDE High Voltage Technology",
publisher = "VDE Verlag GmbH",
pages = "424--429",
booktitle = "VDE High Voltage Technology",
address = "Germany",
note = "VDE High Voltage Technology 2020 ; Conference date: 09-11-2020 Through 11-11-2020",

}

Download

TY - GEN

T1 - Reproducibility of partial discharge measurements on surface discharges according to iec 60270 at dc and ac voltages

AU - Hartje, Michael

AU - Schober, Bernhard

AU - Schichler, Uwe

AU - Torres, Javier

AU - Werle, Peter

PY - 2021/1/1

Y1 - 2021/1/1

N2 - Partial discharge measurement at AC voltage is one of the most important diagnostic tools for testing and evaluating the condition of high-voltage equipment. The requirements for the measuring system, the test setup and the test procedure as well as the evaluation methods are defined in IEC 60270. Acceptance criteria and measurement procedures are defined in the corresponding standards of the different equipment. For partial discharge measurements under DC voltage stress, the requirements have to be questioned, due to the different partial discharge behaviour of some defects and the lack of experience at DC voltage. Due to the increasing use of HVDC transmission systems in the future transmission grid, partial discharge measurement under DC voltage is becoming more and more important. For this reason, the applicability of IEC 60270 for partial discharge measurements under DC voltage was examined in different round-robin tests. After the already published measurement results on epoxy insulators and measurements on a needle-plate arrangement, this paper presents investigations on surface discharge arrangements and analyses, compares and discusses the results of the different laboratories.

AB - Partial discharge measurement at AC voltage is one of the most important diagnostic tools for testing and evaluating the condition of high-voltage equipment. The requirements for the measuring system, the test setup and the test procedure as well as the evaluation methods are defined in IEC 60270. Acceptance criteria and measurement procedures are defined in the corresponding standards of the different equipment. For partial discharge measurements under DC voltage stress, the requirements have to be questioned, due to the different partial discharge behaviour of some defects and the lack of experience at DC voltage. Due to the increasing use of HVDC transmission systems in the future transmission grid, partial discharge measurement under DC voltage is becoming more and more important. For this reason, the applicability of IEC 60270 for partial discharge measurements under DC voltage was examined in different round-robin tests. After the already published measurement results on epoxy insulators and measurements on a needle-plate arrangement, this paper presents investigations on surface discharge arrangements and analyses, compares and discusses the results of the different laboratories.

UR - http://www.scopus.com/inward/record.url?scp=85101679346&partnerID=8YFLogxK

U2 - 10.1049/icp.2022.0224

DO - 10.1049/icp.2022.0224

M3 - Conference contribution

AN - SCOPUS:85101679346

T3 - VDE High Voltage Technology

SP - 424

EP - 429

BT - VDE High Voltage Technology

PB - VDE Verlag GmbH

T2 - VDE High Voltage Technology 2020

Y2 - 9 November 2020 through 11 November 2020

ER -

Von denselben Autoren