Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015 |
| Herausgeber (Verlag) | Institute of Electrical and Electronics Engineers Inc. |
| Seiten | 823-829 |
| Seitenumfang | 7 |
| ISBN (elektronisch) | 9781467373173 |
| Publikationsstatus | Veröffentlicht - 20 Nov. 2015 |
| Veranstaltung | 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015 - Auckland, Neuseeland Dauer: 15 Juni 2015 → 17 Juni 2015 |
Abstract
This paper addresses the efficient and user-friendly application of input shaping to a nonlinear parallel mechanism, i.e. the delta robot. The objective is the reduction of residual end effector oscillations at the end of a point-to-point (PTP) movement, without a need for profound user experience. Hence, a detailed identification of system characteristics and computationally intensive model equations are avoided. Instead, configuration dependent oscillation characteristics are followed by an adaptive look-up table. The data acquisition is based on existing standard sensors, in order to avoid additional hardware investments. Uncertain natural frequencies and nonlinear oscillations are handled by the selection of a robust input shaper design with adjustable insensitivity. The performance of the method is proven by experimental validation on a delta robot, that is operated by a standard industrial PLC motion control system. The experiments show an extensive decrease of residual oscillations and, hence, reduced decay times at the end of a commanded motion. Due to the system specific motion profiles, basic motion constraints as acceleration and jerk can be significantly increased for a further reduction of motion time.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015. Institute of Electrical and Electronics Engineers Inc., 2015. S. 823-829 7334224.
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Reduction of end effector oscillations of a parallel mechanism with modified motion profiles
AU - Oltjen, Julian
AU - Kotlarski, Jens
AU - Ortmaier, Tobias
PY - 2015/11/20
Y1 - 2015/11/20
N2 - This paper addresses the efficient and user-friendly application of input shaping to a nonlinear parallel mechanism, i.e. the delta robot. The objective is the reduction of residual end effector oscillations at the end of a point-to-point (PTP) movement, without a need for profound user experience. Hence, a detailed identification of system characteristics and computationally intensive model equations are avoided. Instead, configuration dependent oscillation characteristics are followed by an adaptive look-up table. The data acquisition is based on existing standard sensors, in order to avoid additional hardware investments. Uncertain natural frequencies and nonlinear oscillations are handled by the selection of a robust input shaper design with adjustable insensitivity. The performance of the method is proven by experimental validation on a delta robot, that is operated by a standard industrial PLC motion control system. The experiments show an extensive decrease of residual oscillations and, hence, reduced decay times at the end of a commanded motion. Due to the system specific motion profiles, basic motion constraints as acceleration and jerk can be significantly increased for a further reduction of motion time.
AB - This paper addresses the efficient and user-friendly application of input shaping to a nonlinear parallel mechanism, i.e. the delta robot. The objective is the reduction of residual end effector oscillations at the end of a point-to-point (PTP) movement, without a need for profound user experience. Hence, a detailed identification of system characteristics and computationally intensive model equations are avoided. Instead, configuration dependent oscillation characteristics are followed by an adaptive look-up table. The data acquisition is based on existing standard sensors, in order to avoid additional hardware investments. Uncertain natural frequencies and nonlinear oscillations are handled by the selection of a robust input shaper design with adjustable insensitivity. The performance of the method is proven by experimental validation on a delta robot, that is operated by a standard industrial PLC motion control system. The experiments show an extensive decrease of residual oscillations and, hence, reduced decay times at the end of a commanded motion. Due to the system specific motion profiles, basic motion constraints as acceleration and jerk can be significantly increased for a further reduction of motion time.
UR - http://www.scopus.com/inward/record.url?scp=84960885121&partnerID=8YFLogxK
U2 - 10.1109/iciea.2015.7334224
DO - 10.1109/iciea.2015.7334224
M3 - Conference contribution
AN - SCOPUS:84960885121
SP - 823
EP - 829
BT - Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015
Y2 - 15 June 2015 through 17 June 2015
ER -