Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Conference Proceedings of the 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion |
| Untertitel | SPEEDAM 2024 |
| Herausgeber (Verlag) | Institute of Electrical and Electronics Engineers Inc. |
| Seiten | 1309-1315 |
| Seitenumfang | 7 |
| ISBN (elektronisch) | 9798350387599 |
| ISBN (Print) | 979-8-3503-8760-5 |
| Publikationsstatus | Veröffentlicht - 19 Juni 2024 |
| Veranstaltung | 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2024 - Napoli, Italien Dauer: 19 Juni 2024 → 21 Juni 2024 |
Abstract
In additively manufactured electrical machines, larger eddy currents occur than in comparable conventionally manufactured machines due to the absence of laminated iron sheets. This paper presents possible methods of suppressing eddy currents in synchronous reluctance machines. These methods are compared with each other and evaluated, taking into account the effects on the operating behaviour. The additional degree of freedom in the axial direction provided by additive manufacturing is used in the design. First, the geometry and several operating parameters of a synchronous reluctance machine model are presented. This model is transiently simulated in 3D finite element analysis software and serves as a reference. In the following sections, the model is provided with circumferential and axial slots, as well as a combination of the two, in order to investigate the effects on the generation of eddy currents.
ASJC Scopus Sachgebiete
- Energie (insg.)
- Energieanlagenbau und Kraftwerkstechnik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
- Ingenieurwesen (insg.)
- Maschinenbau
- Mathematik (insg.)
- Steuerung und Optimierung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Conference Proceedings of the 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion: SPEEDAM 2024. Institute of Electrical and Electronics Engineers Inc., 2024. S. 1309-1315.
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Reduction of Eddy Current Losses in Additively Manufactured Synchronous Reluctance Rotors
AU - Schubert, Marius
AU - Ponick, Bernd
N1 - Publisher Copyright: © 2024 IEEE.
PY - 2024/6/19
Y1 - 2024/6/19
N2 - In additively manufactured electrical machines, larger eddy currents occur than in comparable conventionally manufactured machines due to the absence of laminated iron sheets. This paper presents possible methods of suppressing eddy currents in synchronous reluctance machines. These methods are compared with each other and evaluated, taking into account the effects on the operating behaviour. The additional degree of freedom in the axial direction provided by additive manufacturing is used in the design. First, the geometry and several operating parameters of a synchronous reluctance machine model are presented. This model is transiently simulated in 3D finite element analysis software and serves as a reference. In the following sections, the model is provided with circumferential and axial slots, as well as a combination of the two, in order to investigate the effects on the generation of eddy currents.
AB - In additively manufactured electrical machines, larger eddy currents occur than in comparable conventionally manufactured machines due to the absence of laminated iron sheets. This paper presents possible methods of suppressing eddy currents in synchronous reluctance machines. These methods are compared with each other and evaluated, taking into account the effects on the operating behaviour. The additional degree of freedom in the axial direction provided by additive manufacturing is used in the design. First, the geometry and several operating parameters of a synchronous reluctance machine model are presented. This model is transiently simulated in 3D finite element analysis software and serves as a reference. In the following sections, the model is provided with circumferential and axial slots, as well as a combination of the two, in order to investigate the effects on the generation of eddy currents.
KW - Additive Manufacturing
KW - Eddy Currents
KW - FEA
KW - Machine Design
KW - Rotor
KW - Synchronous Reluctance Motor
UR - http://www.scopus.com/inward/record.url?scp=85201733620&partnerID=8YFLogxK
U2 - 10.1109/SPEEDAM61530.2024.10609070
DO - 10.1109/SPEEDAM61530.2024.10609070
M3 - Conference contribution
AN - SCOPUS:85201733620
SN - 979-8-3503-8760-5
SP - 1309
EP - 1315
BT - Conference Proceedings of the 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2024
Y2 - 19 June 2024 through 21 June 2024
ER -