Real and Pseudo Oxygen Gradients in Ca‐Alginate Beads Monitored During Polarographic Po2‐Measurements Using Pt‐Needle Microelectrodes

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • W. Müller
  • A. Winnefeld
  • O. Kohls
  • T. Scheper
  • W. Zimelka
  • H. Baumgärtl

Externe Organisationen

  • Westfälische Wilhelms-Universität Münster (WWU)
  • Max-Planck-Institut für molekulare Physiologie
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)617-625
Seitenumfang9
FachzeitschriftBiotechnology and Bioengineering
Jahrgang44
Ausgabenummer5
PublikationsstatusVeröffentlicht - 20 Aug. 1994
Extern publiziertJa

Abstract

Polarographic microcoaxial needle electrodes were used to measure internal profiles of dissolved oxygen tension (Po2) within single Ca‐alginate beads of different diameter containing entrapped cells of Saccharomyces cerevisiae. For the investigations, single beads coming from variable growing conditions and distinct cultivation stages were fixed in a special holding device. In dependence on microbial growth steep oxygen gradients were observed. The Oxygen penetration depth at steady state lay between 50 and 100 μm. After 8 h of cultivation time, the anaerobic space within the beads (ϕ 2 mm; cultivation in a packed bed reactor) is beginning at ∼ 130 μm, whereas the anaerobic space within the beads (ϕ 2 mm) coming from the shaker flask culture is located ∼440 μm below the bead surface. Surprisingly, steep gradients were also observed, when recording profiles from cell‐free Ca‐alginate beads of different diameter and alginate concentrations. The steep oxygen gradients apparently had to be interpreted as pseudo‐Po2‐gradients. These results were borne by several effects, such as formation of artifacts and diffusion barriers in front of the electrode tip or oxygen “availability” at the tip and consumption of oxygen by the electrode itself. These phenomena could be documented by microscopic observation and photography. Thus, to obtain real Po2‐profiles it is important to be exactly informed about the physical, chemical, and biological properties of the material to be investigated. Furthermore, it is necessary to apply a special stepwise puncture technique with distinct step‐in/step‐out movements of the electrode: e.g., unidirectional or contradirectional puncture techniques. © 1994 John Wiley & Sons, Inc.

ASJC Scopus Sachgebiete

Zitieren

Real and Pseudo Oxygen Gradients in Ca‐Alginate Beads Monitored During Polarographic Po2‐Measurements Using Pt‐Needle Microelectrodes. / Müller, W.; Winnefeld, A.; Kohls, O. et al.
in: Biotechnology and Bioengineering, Jahrgang 44, Nr. 5, 20.08.1994, S. 617-625.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Download
@article{62c6f5e19d0a4ca28d9769170390d655,
title = "Real and Pseudo Oxygen Gradients in Ca‐Alginate Beads Monitored During Polarographic Po2‐Measurements Using Pt‐Needle Microelectrodes",
abstract = "Polarographic microcoaxial needle electrodes were used to measure internal profiles of dissolved oxygen tension (Po2) within single Ca‐alginate beads of different diameter containing entrapped cells of Saccharomyces cerevisiae. For the investigations, single beads coming from variable growing conditions and distinct cultivation stages were fixed in a special holding device. In dependence on microbial growth steep oxygen gradients were observed. The Oxygen penetration depth at steady state lay between 50 and 100 μm. After 8 h of cultivation time, the anaerobic space within the beads (ϕ 2 mm; cultivation in a packed bed reactor) is beginning at ∼ 130 μm, whereas the anaerobic space within the beads (ϕ 2 mm) coming from the shaker flask culture is located ∼440 μm below the bead surface. Surprisingly, steep gradients were also observed, when recording profiles from cell‐free Ca‐alginate beads of different diameter and alginate concentrations. The steep oxygen gradients apparently had to be interpreted as pseudo‐Po2‐gradients. These results were borne by several effects, such as formation of artifacts and diffusion barriers in front of the electrode tip or oxygen “availability” at the tip and consumption of oxygen by the electrode itself. These phenomena could be documented by microscopic observation and photography. Thus, to obtain real Po2‐profiles it is important to be exactly informed about the physical, chemical, and biological properties of the material to be investigated. Furthermore, it is necessary to apply a special stepwise puncture technique with distinct step‐in/step‐out movements of the electrode: e.g., unidirectional or contradirectional puncture techniques. {\textcopyright} 1994 John Wiley & Sons, Inc.",
keywords = "alginate beads, artifacts, oxygen microprobe, oxygen profiles, Po‐microelectrode, Saccharomyces cerevisiae",
author = "W. M{\"u}ller and A. Winnefeld and O. Kohls and T. Scheper and W. Zimelka and H. Baumg{\"a}rtl",
year = "1994",
month = aug,
day = "20",
doi = "10.1002/bit.260440508",
language = "English",
volume = "44",
pages = "617--625",
journal = "Biotechnology and Bioengineering",
issn = "0006-3592",
publisher = "Wiley-VCH Verlag",
number = "5",

}

Download

TY - JOUR

T1 - Real and Pseudo Oxygen Gradients in Ca‐Alginate Beads Monitored During Polarographic Po2‐Measurements Using Pt‐Needle Microelectrodes

AU - Müller, W.

AU - Winnefeld, A.

AU - Kohls, O.

AU - Scheper, T.

AU - Zimelka, W.

AU - Baumgärtl, H.

PY - 1994/8/20

Y1 - 1994/8/20

N2 - Polarographic microcoaxial needle electrodes were used to measure internal profiles of dissolved oxygen tension (Po2) within single Ca‐alginate beads of different diameter containing entrapped cells of Saccharomyces cerevisiae. For the investigations, single beads coming from variable growing conditions and distinct cultivation stages were fixed in a special holding device. In dependence on microbial growth steep oxygen gradients were observed. The Oxygen penetration depth at steady state lay between 50 and 100 μm. After 8 h of cultivation time, the anaerobic space within the beads (ϕ 2 mm; cultivation in a packed bed reactor) is beginning at ∼ 130 μm, whereas the anaerobic space within the beads (ϕ 2 mm) coming from the shaker flask culture is located ∼440 μm below the bead surface. Surprisingly, steep gradients were also observed, when recording profiles from cell‐free Ca‐alginate beads of different diameter and alginate concentrations. The steep oxygen gradients apparently had to be interpreted as pseudo‐Po2‐gradients. These results were borne by several effects, such as formation of artifacts and diffusion barriers in front of the electrode tip or oxygen “availability” at the tip and consumption of oxygen by the electrode itself. These phenomena could be documented by microscopic observation and photography. Thus, to obtain real Po2‐profiles it is important to be exactly informed about the physical, chemical, and biological properties of the material to be investigated. Furthermore, it is necessary to apply a special stepwise puncture technique with distinct step‐in/step‐out movements of the electrode: e.g., unidirectional or contradirectional puncture techniques. © 1994 John Wiley & Sons, Inc.

AB - Polarographic microcoaxial needle electrodes were used to measure internal profiles of dissolved oxygen tension (Po2) within single Ca‐alginate beads of different diameter containing entrapped cells of Saccharomyces cerevisiae. For the investigations, single beads coming from variable growing conditions and distinct cultivation stages were fixed in a special holding device. In dependence on microbial growth steep oxygen gradients were observed. The Oxygen penetration depth at steady state lay between 50 and 100 μm. After 8 h of cultivation time, the anaerobic space within the beads (ϕ 2 mm; cultivation in a packed bed reactor) is beginning at ∼ 130 μm, whereas the anaerobic space within the beads (ϕ 2 mm) coming from the shaker flask culture is located ∼440 μm below the bead surface. Surprisingly, steep gradients were also observed, when recording profiles from cell‐free Ca‐alginate beads of different diameter and alginate concentrations. The steep oxygen gradients apparently had to be interpreted as pseudo‐Po2‐gradients. These results were borne by several effects, such as formation of artifacts and diffusion barriers in front of the electrode tip or oxygen “availability” at the tip and consumption of oxygen by the electrode itself. These phenomena could be documented by microscopic observation and photography. Thus, to obtain real Po2‐profiles it is important to be exactly informed about the physical, chemical, and biological properties of the material to be investigated. Furthermore, it is necessary to apply a special stepwise puncture technique with distinct step‐in/step‐out movements of the electrode: e.g., unidirectional or contradirectional puncture techniques. © 1994 John Wiley & Sons, Inc.

KW - alginate beads

KW - artifacts

KW - oxygen microprobe

KW - oxygen profiles

KW - Po‐microelectrode

KW - Saccharomyces cerevisiae

UR - http://www.scopus.com/inward/record.url?scp=0028485582&partnerID=8YFLogxK

U2 - 10.1002/bit.260440508

DO - 10.1002/bit.260440508

M3 - Article

AN - SCOPUS:0028485582

VL - 44

SP - 617

EP - 625

JO - Biotechnology and Bioengineering

JF - Biotechnology and Bioengineering

SN - 0006-3592

IS - 5

ER -

Von denselben Autoren