Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 211-220 |
| Seitenumfang | 10 |
| Fachzeitschrift | Structural concrete |
| Jahrgang | 11 |
| Ausgabenummer | 4 |
| Publikationsstatus | Veröffentlicht - Dez. 2010 |
Abstract
The main objective of this paper is to study the effect of eccentricity of loads on the ultimate punching resistance and rotational capacity of slabs. A mechanical model recently proposed by Muttoni, which has been developed to predict the punching capacity of slab-column connections under concentric loads, is developed in the same manner as that of Broms to be applicable for the investigation of rotational capacity of slabs under eccentric loads. Furthermore, the effect of eccentricity of load on the ultimate punching resistance and the rotational capacity of slabs with respect to column is numerically studied performing a non-linear finite-element analysis using Atena. The numerical analyses consist of calculations of selected punching tests. The factors affecting the behaviour of the connections, such as the ratio of tension reinforcement, the type of reinforcement steel and the concrete compression strength are studied parametrically. The results of the analyses are compared with Eurocode 2 and ACI code predictions and with the mechanical model previously proposed by Broms and the model developed by Muttoni.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Tief- und Ingenieurbau
- Ingenieurwesen (insg.)
- Bauwesen
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Ingenieurwesen (insg.)
- Werkstoffmechanik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Structural concrete, Jahrgang 11, Nr. 4, 12.2010, S. 211-220.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Punching of RC slabs under eccentric loads
AU - Farzam, M.
AU - Fouad, N. A.
AU - Grünberg, J.
AU - Fard, M. Y.
N1 - Copyright: Copyright 2018 Elsevier B.V., All rights reserved.
PY - 2010/12
Y1 - 2010/12
N2 - The main objective of this paper is to study the effect of eccentricity of loads on the ultimate punching resistance and rotational capacity of slabs. A mechanical model recently proposed by Muttoni, which has been developed to predict the punching capacity of slab-column connections under concentric loads, is developed in the same manner as that of Broms to be applicable for the investigation of rotational capacity of slabs under eccentric loads. Furthermore, the effect of eccentricity of load on the ultimate punching resistance and the rotational capacity of slabs with respect to column is numerically studied performing a non-linear finite-element analysis using Atena. The numerical analyses consist of calculations of selected punching tests. The factors affecting the behaviour of the connections, such as the ratio of tension reinforcement, the type of reinforcement steel and the concrete compression strength are studied parametrically. The results of the analyses are compared with Eurocode 2 and ACI code predictions and with the mechanical model previously proposed by Broms and the model developed by Muttoni.
AB - The main objective of this paper is to study the effect of eccentricity of loads on the ultimate punching resistance and rotational capacity of slabs. A mechanical model recently proposed by Muttoni, which has been developed to predict the punching capacity of slab-column connections under concentric loads, is developed in the same manner as that of Broms to be applicable for the investigation of rotational capacity of slabs under eccentric loads. Furthermore, the effect of eccentricity of load on the ultimate punching resistance and the rotational capacity of slabs with respect to column is numerically studied performing a non-linear finite-element analysis using Atena. The numerical analyses consist of calculations of selected punching tests. The factors affecting the behaviour of the connections, such as the ratio of tension reinforcement, the type of reinforcement steel and the concrete compression strength are studied parametrically. The results of the analyses are compared with Eurocode 2 and ACI code predictions and with the mechanical model previously proposed by Broms and the model developed by Muttoni.
UR - http://www.scopus.com/inward/record.url?scp=79551602503&partnerID=8YFLogxK
U2 - 10.1680/stco.2010.11.4.211
DO - 10.1680/stco.2010.11.4.211
M3 - Article
AN - SCOPUS:79551602503
VL - 11
SP - 211
EP - 220
JO - Structural concrete
JF - Structural concrete
SN - 1464-4177
IS - 4
ER -