Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 357-365 |
| Seitenumfang | 9 |
| Fachzeitschrift | Lasers in Engineering |
| Jahrgang | 37 |
| Ausgabenummer | 4-6 |
| Publikationsstatus | Veröffentlicht - 2017 |
Abstract
A picosecond laser system emitting laser radiation with 515 nm at 7 ps pulse duration was used in combination with a galvanometric scanner to produce optically transparent antennas. The antenna substrate material was 200 μm thick fused silica glass which was radio frequency (RF) sputtered with a 1 μm thick Cu coating. The antenna structure was generated by laser ablation of the Cu coating. The goal of the investigation was to find laser parameters which remove the Cu coating at maximum optical transparency of the ablated area and to identify the relationship between laser parameters, designed antenna layout and generated antenna geometry. The findings suggest that the patterning process should be realized at low fluencies in the range of Cu's ablation threshold in combination with multiple irradiation cycles in order to remove the Cu coating without affecting the glass surface. Increasing the fluence or irradiation cycles increased the ablated area which decreased the width of the generated antenna traces. At the optimized laser parameters, a linear relationship between the designed layout trace width and generated trace width was found. The relationship enabled the production of antenna geometries with high precision which operated at the designed frequency.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Atom- und Molekularphysik sowie Optik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Lasers in Engineering, Jahrgang 37, Nr. 4-6, 2017, S. 357-365.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Production of meshed microstrip antennas with laser patterning
AU - von Witzendorff, Philipp
AU - Dao, Quang Huy
AU - Suttmann, Oliver
AU - Skubacz-Feucht, Alexandra Gudrun
AU - Overmeyer, Ludger
PY - 2017
Y1 - 2017
N2 - A picosecond laser system emitting laser radiation with 515 nm at 7 ps pulse duration was used in combination with a galvanometric scanner to produce optically transparent antennas. The antenna substrate material was 200 μm thick fused silica glass which was radio frequency (RF) sputtered with a 1 μm thick Cu coating. The antenna structure was generated by laser ablation of the Cu coating. The goal of the investigation was to find laser parameters which remove the Cu coating at maximum optical transparency of the ablated area and to identify the relationship between laser parameters, designed antenna layout and generated antenna geometry. The findings suggest that the patterning process should be realized at low fluencies in the range of Cu's ablation threshold in combination with multiple irradiation cycles in order to remove the Cu coating without affecting the glass surface. Increasing the fluence or irradiation cycles increased the ablated area which decreased the width of the generated antenna traces. At the optimized laser parameters, a linear relationship between the designed layout trace width and generated trace width was found. The relationship enabled the production of antenna geometries with high precision which operated at the designed frequency.
AB - A picosecond laser system emitting laser radiation with 515 nm at 7 ps pulse duration was used in combination with a galvanometric scanner to produce optically transparent antennas. The antenna substrate material was 200 μm thick fused silica glass which was radio frequency (RF) sputtered with a 1 μm thick Cu coating. The antenna structure was generated by laser ablation of the Cu coating. The goal of the investigation was to find laser parameters which remove the Cu coating at maximum optical transparency of the ablated area and to identify the relationship between laser parameters, designed antenna layout and generated antenna geometry. The findings suggest that the patterning process should be realized at low fluencies in the range of Cu's ablation threshold in combination with multiple irradiation cycles in order to remove the Cu coating without affecting the glass surface. Increasing the fluence or irradiation cycles increased the ablated area which decreased the width of the generated antenna traces. At the optimized laser parameters, a linear relationship between the designed layout trace width and generated trace width was found. The relationship enabled the production of antenna geometries with high precision which operated at the designed frequency.
KW - Antenna
KW - Copper
KW - Cu
KW - Laser parameters
KW - Laser patterning
KW - Microstrip
KW - Picosecond laser
KW - Silica glass
UR - http://www.scopus.com/inward/record.url?scp=85019915990&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:85019915990
VL - 37
SP - 357
EP - 365
JO - Lasers in Engineering
JF - Lasers in Engineering
SN - 0898-1507
IS - 4-6
ER -