Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 203-208 |
| Seitenumfang | 6 |
| Fachzeitschrift | Journal of electroceramics |
| Jahrgang | 20 |
| Ausgabenummer | 3-4 |
| Publikationsstatus | Veröffentlicht - 1 Juni 2007 |
| Extern publiziert | Ja |
Abstract
Many modern devices especially for ubiquitous computing or wireless sensor networks need a long life energy source. Batteries or accumulators are often an insufficient solution. Low frequency vibrations can be found in the most technical facilities or even in the human movements. Even while these vibrations are neither wanted nor used in the most times, they enable us to generate electrical energy. Piezoelectric flexural transducers are a promising choice for utilizing the vibrations for energy harvesting. There are two major influences on the amount of generated energy. First there is the frequency behavior of the piezoelectric transducers, for optimal power output the transducer should be driven in resonance. Second, the energy output is highly dependent on the electrical load of the connected application. Both circumstances, working frequency and electrical load, typically are boundary conditions for the development of the generator. Therefore, it is necessary to handpick the type of piezoelectric elements. To meet the requirements of development engineers, a model based design method for energy harvesting systems is needed. As a first step towards such a method, this work proposes a model for the estimations of the power output of piezoelectric flexural transducers. For the validation of this model an experiment is described in detail. The results of the model and the experiments are compared.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Werkstoffwissenschaften (insg.)
- Keramische und Verbundwerkstoffe
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Journal of electroceramics, Jahrgang 20, Nr. 3-4, 01.06.2007, S. 203-208.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Power output estimation and experimental validation for piezoelectric energy harvesting systems
AU - Twiefel, Jens
AU - Richter, Björn
AU - Sattel, Thomas
AU - Wallaschek, Jörg
N1 - Copyright: Copyright 2008 Elsevier B.V., All rights reserved.
PY - 2007/6/1
Y1 - 2007/6/1
N2 - Many modern devices especially for ubiquitous computing or wireless sensor networks need a long life energy source. Batteries or accumulators are often an insufficient solution. Low frequency vibrations can be found in the most technical facilities or even in the human movements. Even while these vibrations are neither wanted nor used in the most times, they enable us to generate electrical energy. Piezoelectric flexural transducers are a promising choice for utilizing the vibrations for energy harvesting. There are two major influences on the amount of generated energy. First there is the frequency behavior of the piezoelectric transducers, for optimal power output the transducer should be driven in resonance. Second, the energy output is highly dependent on the electrical load of the connected application. Both circumstances, working frequency and electrical load, typically are boundary conditions for the development of the generator. Therefore, it is necessary to handpick the type of piezoelectric elements. To meet the requirements of development engineers, a model based design method for energy harvesting systems is needed. As a first step towards such a method, this work proposes a model for the estimations of the power output of piezoelectric flexural transducers. For the validation of this model an experiment is described in detail. The results of the model and the experiments are compared.
AB - Many modern devices especially for ubiquitous computing or wireless sensor networks need a long life energy source. Batteries or accumulators are often an insufficient solution. Low frequency vibrations can be found in the most technical facilities or even in the human movements. Even while these vibrations are neither wanted nor used in the most times, they enable us to generate electrical energy. Piezoelectric flexural transducers are a promising choice for utilizing the vibrations for energy harvesting. There are two major influences on the amount of generated energy. First there is the frequency behavior of the piezoelectric transducers, for optimal power output the transducer should be driven in resonance. Second, the energy output is highly dependent on the electrical load of the connected application. Both circumstances, working frequency and electrical load, typically are boundary conditions for the development of the generator. Therefore, it is necessary to handpick the type of piezoelectric elements. To meet the requirements of development engineers, a model based design method for energy harvesting systems is needed. As a first step towards such a method, this work proposes a model for the estimations of the power output of piezoelectric flexural transducers. For the validation of this model an experiment is described in detail. The results of the model and the experiments are compared.
KW - Autonomous systems
KW - Energy harvesting
KW - Energy supply
KW - Piezoelectric elements
UR - http://www.scopus.com/inward/record.url?scp=43249112074&partnerID=8YFLogxK
U2 - 10.1007/s10832-007-9168-5
DO - 10.1007/s10832-007-9168-5
M3 - Article
AN - SCOPUS:43249112074
VL - 20
SP - 203
EP - 208
JO - Journal of electroceramics
JF - Journal of electroceramics
SN - 1385-3449
IS - 3-4
ER -