Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 167-174 |
| Seitenumfang | 8 |
| Fachzeitschrift | CIRP Journal of Manufacturing Science and Technology |
| Jahrgang | 6 |
| Ausgabenummer | 3 |
| Publikationsstatus | Veröffentlicht - 20 Juni 2013 |
Abstract
Repair techniques for high-value components offer a huge economical and ecologic potential, but are rarely investigated in science, yet. One main step of the process chain for regeneration of damaged components is the removal of excess weld material, called re-contouring, which is often carried out manually nowadays. Although there are special automated software solutions using milling machines for re-contouring, changing material properties and microstructure as well as changing engagement conditions due to welded or brazed areas are not considered in tool path planning. This paper presents a research approach in which the influence of the material inhomogeneity and discontinuous shape of weld on the machining processes for re-contouring is investigated. A numerical simulation is used to calculate the process forces accurately per time step with consideration of changing material properties. The experimental and numerical investigations prove a much higher influence on the changing engagement conditions due to geometrical variations of the weld compared to the influence of material inhomogeneity due to welding.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: CIRP Journal of Manufacturing Science and Technology, Jahrgang 6, Nr. 3, 20.06.2013, S. 167-174.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Numerical simulation of process forces during re-contouring of welded parts considering different material properties
AU - Böß, V.
AU - Nespor, D.
AU - Samp, A.
AU - Denkena, B.
N1 - Funding information: The authors thank the German Research Foundation (DFG) for the financial support within the Collaborative Research Centre 871: Refurbishment of complex capital goods.
PY - 2013/6/20
Y1 - 2013/6/20
N2 - Repair techniques for high-value components offer a huge economical and ecologic potential, but are rarely investigated in science, yet. One main step of the process chain for regeneration of damaged components is the removal of excess weld material, called re-contouring, which is often carried out manually nowadays. Although there are special automated software solutions using milling machines for re-contouring, changing material properties and microstructure as well as changing engagement conditions due to welded or brazed areas are not considered in tool path planning. This paper presents a research approach in which the influence of the material inhomogeneity and discontinuous shape of weld on the machining processes for re-contouring is investigated. A numerical simulation is used to calculate the process forces accurately per time step with consideration of changing material properties. The experimental and numerical investigations prove a much higher influence on the changing engagement conditions due to geometrical variations of the weld compared to the influence of material inhomogeneity due to welding.
AB - Repair techniques for high-value components offer a huge economical and ecologic potential, but are rarely investigated in science, yet. One main step of the process chain for regeneration of damaged components is the removal of excess weld material, called re-contouring, which is often carried out manually nowadays. Although there are special automated software solutions using milling machines for re-contouring, changing material properties and microstructure as well as changing engagement conditions due to welded or brazed areas are not considered in tool path planning. This paper presents a research approach in which the influence of the material inhomogeneity and discontinuous shape of weld on the machining processes for re-contouring is investigated. A numerical simulation is used to calculate the process forces accurately per time step with consideration of changing material properties. The experimental and numerical investigations prove a much higher influence on the changing engagement conditions due to geometrical variations of the weld compared to the influence of material inhomogeneity due to welding.
KW - Algorithm
KW - Force modelling
KW - Milling simulation
KW - Titanium
KW - Welding
UR - http://www.scopus.com/inward/record.url?scp=84880045506&partnerID=8YFLogxK
U2 - 10.1016/j.cirpj.2013.05.001
DO - 10.1016/j.cirpj.2013.05.001
M3 - Article
AN - SCOPUS:84880045506
VL - 6
SP - 167
EP - 174
JO - CIRP Journal of Manufacturing Science and Technology
JF - CIRP Journal of Manufacturing Science and Technology
SN - 1755-5817
IS - 3
ER -