Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Autoren

  • B. A. Behrens
  • A. Bouguecha
  • M. Vucetic
  • S. Hübner
  • D. Rosenbusch
  • S. Koch
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Titel des SammelwerksKey Engineering Materials
Herausgeber/-innenAldo Ofenheimer, Cecilia Poletti, Daniela Schalk-Kitting, Christof Sommitsch
Seiten1153-1158
Seitenumfang6
PublikationsstatusVeröffentlicht - 10 Juli 2015
Veranstaltung18th International ESAFORM Conference on Material Forming, ESAFORM 2015 - Graz, Österreich
Dauer: 15 Apr. 201517 Apr. 2015

Publikationsreihe

NameKey Engineering Materials
Band651-653
ISSN (Print)1013-9826
ISSN (elektronisch)1662-9795

Abstract

Sheet-bulk metal forming is a manufacturing technology, which allows to produce a solid metal component out of a flat sheet. This paper focuses on numerical and experimental investigations of a new multistage forming process with compound press tools. The complete process sequence for the production of this solid metal component consists of three forming stages, which include a total of six production techniques. The first forming stage includes deep drawing, simultaneous cutting and following wall upsetting. In the second forming stage, flange forming combined with cup bottom ironing takes place. In the last stage of the process sequence, the component is sized. To investigate and to improve process parameters such as plastic strain distribution, resulting dimensions and process forces, FEA is performed. Based on these results the developed process is designed.

ASJC Scopus Sachgebiete

Zitieren

Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. / Behrens, B. A.; Bouguecha, A.; Vucetic, M. et al.
Key Engineering Materials. Hrsg. / Aldo Ofenheimer; Cecilia Poletti; Daniela Schalk-Kitting; Christof Sommitsch. 2015. S. 1153-1158 (Key Engineering Materials; Band 651-653).

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Behrens, BA, Bouguecha, A, Vucetic, M, Hübner, S, Rosenbusch, D & Koch, S 2015, Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. in A Ofenheimer, C Poletti, D Schalk-Kitting & C Sommitsch (Hrsg.), Key Engineering Materials. Key Engineering Materials, Bd. 651-653, S. 1153-1158, 18th International ESAFORM Conference on Material Forming, ESAFORM 2015, Graz, Österreich, 15 Apr. 2015. https://doi.org/10.4028/www.scientific.net/kem.651-653.1153
Behrens, B. A., Bouguecha, A., Vucetic, M., Hübner, S., Rosenbusch, D., & Koch, S. (2015). Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. In A. Ofenheimer, C. Poletti, D. Schalk-Kitting, & C. Sommitsch (Hrsg.), Key Engineering Materials (S. 1153-1158). (Key Engineering Materials; Band 651-653). https://doi.org/10.4028/www.scientific.net/kem.651-653.1153
Behrens BA, Bouguecha A, Vucetic M, Hübner S, Rosenbusch D, Koch S. Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. in Ofenheimer A, Poletti C, Schalk-Kitting D, Sommitsch C, Hrsg., Key Engineering Materials. 2015. S. 1153-1158. (Key Engineering Materials). doi: 10.4028/www.scientific.net/kem.651-653.1153
Behrens, B. A. ; Bouguecha, A. ; Vucetic, M. et al. / Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools. Key Engineering Materials. Hrsg. / Aldo Ofenheimer ; Cecilia Poletti ; Daniela Schalk-Kitting ; Christof Sommitsch. 2015. S. 1153-1158 (Key Engineering Materials).
Download
@inproceedings{7741bc69f6cc4a7fb7e33e8ea106f266,
title = "Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools",
abstract = "Sheet-bulk metal forming is a manufacturing technology, which allows to produce a solid metal component out of a flat sheet. This paper focuses on numerical and experimental investigations of a new multistage forming process with compound press tools. The complete process sequence for the production of this solid metal component consists of three forming stages, which include a total of six production techniques. The first forming stage includes deep drawing, simultaneous cutting and following wall upsetting. In the second forming stage, flange forming combined with cup bottom ironing takes place. In the last stage of the process sequence, the component is sized. To investigate and to improve process parameters such as plastic strain distribution, resulting dimensions and process forces, FEA is performed. Based on these results the developed process is designed.",
keywords = "FE simulation, Multistage forming process, Sheet-bulk metal forming",
author = "Behrens, {B. A.} and A. Bouguecha and M. Vucetic and S. H{\"u}bner and D. Rosenbusch and S. Koch",
note = "Publisher Copyright: {\textcopyright} (2015) Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 18th International ESAFORM Conference on Material Forming, ESAFORM 2015 ; Conference date: 15-04-2015 Through 17-04-2015",
year = "2015",
month = jul,
day = "10",
doi = "10.4028/www.scientific.net/kem.651-653.1153",
language = "English",
isbn = "9783038354710",
series = "Key Engineering Materials",
pages = "1153--1158",
editor = "Aldo Ofenheimer and Cecilia Poletti and Daniela Schalk-Kitting and Christof Sommitsch",
booktitle = "Key Engineering Materials",

}

Download

TY - GEN

T1 - Numerical and experimental investigations of multistage sheet-bulk metal forming process with compound press tools

AU - Behrens, B. A.

AU - Bouguecha, A.

AU - Vucetic, M.

AU - Hübner, S.

AU - Rosenbusch, D.

AU - Koch, S.

N1 - Publisher Copyright: © (2015) Trans Tech Publications, Switzerland. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.

PY - 2015/7/10

Y1 - 2015/7/10

N2 - Sheet-bulk metal forming is a manufacturing technology, which allows to produce a solid metal component out of a flat sheet. This paper focuses on numerical and experimental investigations of a new multistage forming process with compound press tools. The complete process sequence for the production of this solid metal component consists of three forming stages, which include a total of six production techniques. The first forming stage includes deep drawing, simultaneous cutting and following wall upsetting. In the second forming stage, flange forming combined with cup bottom ironing takes place. In the last stage of the process sequence, the component is sized. To investigate and to improve process parameters such as plastic strain distribution, resulting dimensions and process forces, FEA is performed. Based on these results the developed process is designed.

AB - Sheet-bulk metal forming is a manufacturing technology, which allows to produce a solid metal component out of a flat sheet. This paper focuses on numerical and experimental investigations of a new multistage forming process with compound press tools. The complete process sequence for the production of this solid metal component consists of three forming stages, which include a total of six production techniques. The first forming stage includes deep drawing, simultaneous cutting and following wall upsetting. In the second forming stage, flange forming combined with cup bottom ironing takes place. In the last stage of the process sequence, the component is sized. To investigate and to improve process parameters such as plastic strain distribution, resulting dimensions and process forces, FEA is performed. Based on these results the developed process is designed.

KW - FE simulation

KW - Multistage forming process

KW - Sheet-bulk metal forming

UR - http://www.scopus.com/inward/record.url?scp=84944233364&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/kem.651-653.1153

DO - 10.4028/www.scientific.net/kem.651-653.1153

M3 - Conference contribution

AN - SCOPUS:84944233364

SN - 9783038354710

T3 - Key Engineering Materials

SP - 1153

EP - 1158

BT - Key Engineering Materials

A2 - Ofenheimer, Aldo

A2 - Poletti, Cecilia

A2 - Schalk-Kitting, Daniela

A2 - Sommitsch, Christof

T2 - 18th International ESAFORM Conference on Material Forming, ESAFORM 2015

Y2 - 15 April 2015 through 17 April 2015

ER -