Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 012006 |
| Fachzeitschrift | IOP Conference Series: Materials Science and Engineering |
| Jahrgang | 179 |
| Ausgabenummer | 1 |
| Publikationsstatus | Veröffentlicht - 1 März 2017 |
| Veranstaltung | 4th International Conference Recent Trends in Structural Materials, COMAT 2016 - Pilsen, Tschechische Republik Dauer: 9 Nov. 2016 → 11 Nov. 2016 |
Abstract
By sheet metal forming processes the forming limits and part characteristics are defined through the process specific loads. In deep drawing processes the maximum deep draw ratios as well as the springback behaviour of the metal parts are depending on the stress distribution in the part material during the forming process. While exceeding the load limits, a failure in the material occurs, which can be avoided by additional force transmission activated in the deep drawing process before the forming limit of material is achieved. This contribution deals with numerical investigation of process effect caused by additional force transmission regarding the extension of the process limits. Here, the steel material HCT 600X+Z (1.0941) in thickness s 0 = 1.0 mm is analyzed numerically using the anisotropic model Hill48. This model is validated by the means of cup test by Swift. Both, the FEA of conventional and forming process with additional force transmission are carried out. The numerical results are compared with reference geometry of rectangle cup.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Ingenieurwesen (insg.)
- Allgemeiner Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: IOP Conference Series: Materials Science and Engineering, Jahrgang 179, Nr. 1, 012006, 01.03.2017.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Numerical analysis of a deep drawing process with additional force transmission for an extension of the process limits
AU - Behrens, B. A.
AU - Bonk, C.
AU - Grbic, N.
AU - Vucetic, M.
PY - 2017/3/1
Y1 - 2017/3/1
N2 - By sheet metal forming processes the forming limits and part characteristics are defined through the process specific loads. In deep drawing processes the maximum deep draw ratios as well as the springback behaviour of the metal parts are depending on the stress distribution in the part material during the forming process. While exceeding the load limits, a failure in the material occurs, which can be avoided by additional force transmission activated in the deep drawing process before the forming limit of material is achieved. This contribution deals with numerical investigation of process effect caused by additional force transmission regarding the extension of the process limits. Here, the steel material HCT 600X+Z (1.0941) in thickness s 0 = 1.0 mm is analyzed numerically using the anisotropic model Hill48. This model is validated by the means of cup test by Swift. Both, the FEA of conventional and forming process with additional force transmission are carried out. The numerical results are compared with reference geometry of rectangle cup.
AB - By sheet metal forming processes the forming limits and part characteristics are defined through the process specific loads. In deep drawing processes the maximum deep draw ratios as well as the springback behaviour of the metal parts are depending on the stress distribution in the part material during the forming process. While exceeding the load limits, a failure in the material occurs, which can be avoided by additional force transmission activated in the deep drawing process before the forming limit of material is achieved. This contribution deals with numerical investigation of process effect caused by additional force transmission regarding the extension of the process limits. Here, the steel material HCT 600X+Z (1.0941) in thickness s 0 = 1.0 mm is analyzed numerically using the anisotropic model Hill48. This model is validated by the means of cup test by Swift. Both, the FEA of conventional and forming process with additional force transmission are carried out. The numerical results are compared with reference geometry of rectangle cup.
UR - http://www.scopus.com/inward/record.url?scp=85016450521&partnerID=8YFLogxK
U2 - 10.1088/1757-899X/179/1/012006
DO - 10.1088/1757-899X/179/1/012006
M3 - Conference article
AN - SCOPUS:85016450521
VL - 179
JO - IOP Conference Series: Materials Science and Engineering
JF - IOP Conference Series: Materials Science and Engineering
SN - 1757-8981
IS - 1
M1 - 012006
T2 - 4th International Conference Recent Trends in Structural Materials, COMAT 2016
Y2 - 9 November 2016 through 11 November 2016
ER -